Poly-β-cyclodextrin strengthen Pr6O11 porous oxidase mimic for dual-channel visual recognition of bioactive cysteine and Fe2

To conveniently monitor bioactive cysteine (Cys) and Fe2+ in practice, a kind of poly-β-cyclodextrin strengthen praseodymium oxide (Pr6O11) porous oxidase mimic (p-β-CD@Pr6O11) was constructed by virtue of the strong coordination between nano Pr6O11 and poly-β-cyclodextrin substrate. After its microstructure and physicochemical property were characterized in detail, it was noted that porous p-β-CD@Pr6O11 exhibited excellent enzyme-like catalytic activity to accelerate the oxidation of 3,3',5,5,'-tetramethylbanzidine (TMB) and 2,2'-azinobis (3-ethylbenzo-thiazoline-6-sulfonic acid) ammonium salt (ABTS) with significant color-enhancement effect in the air. Based on the signal amplification, trace Cys could exclusively deteriorate the UV-vis absorbance at 653 nm of p-β-CD@Pr6O11-TMB and Fe2+ alter the one at 729 nm of p-β-CD@Pr6O11-ABTS with visual color changes. Under the optimized conditions, the proposed p-β-CD@Pr6O11-TMB and p-β-CD@Pr6O11-ABTS systems were successfully applied for dual-channel monitoring of Cys in Cys capsules and fetal bovine serum and Fe2+ in agricultural products with quite low detection limits, i.e., 7.8×10-9 mol·L-1 for Cys and 6.93×10-8 mol·L-1 (S/N=3) for Fe2+, respectively. The synergetic-enhancement detection mechanisms to Cys and Fe2+ were also proposed.

Peroxidase-like activity of bimetal Cu-Zn oxide mesoporous nanospheres for the determination of o-aminophenol

To enhance the peroxidase-like performance and its application in detection of toxic o-aminophenol (o-AP), a kind of bimetal Cu-Zn oxide-based mesoporous nanosphere (Cu_2/3Zn_1/3O PNPs) was constructed under microwave-radiation conditions. Its mesoporous microstructure and peroxidase-like catalytic activity were investigated in detail. The results showed that Cu_2/3Zn_1/3O PNPs possessed a high specific surface area of 34.89 m²g^-1 and a well-distributed mesoporous size of approximate 6.07 nm, which endowed the superior peroxidase-like performance. The material catalyzes the oxidization of 3,3',5,5'-tetramethylbenzidine (TMB) with K_m/V_max of 0.104 mM/3.79 × 10^-8 M·s^-1 in the presence of H₂O₂. Especially o-AP could exclusively deteriorate the characteristic UV-Vis absorbance intensity at 653 nm (A₆₅₃) of the Cu_2/3Zn_1/3O PNPs-TMB-H₂O₂ system with obvious color change from blue to colorless. Under the optimal conditions, the effect of some interfering substances was low and the limit of detection (LOD) for o-AP was 1.65 × 10^-8 mol/L (S/N = 3). When applied to the colorimetric detection of o-AP in practice, the recovery was between 96.1 and 107.2% with R.S.D. less than 2.04%. The mechanism of synergic-enhancement peroxidase-mimic activity of Cu_2/3Zn_1/3O PNPs and its exclusive colorimetric response to o-AP were proposed as well.

Ag nanozyme strengthened by folic acid: Superior peroxidase-mimicking activity and application for visual monitoring of dopamine

Dopamine (DA) is an important neurotransmitter; however, any excess or deficiency of DA will cause several diseases in humans. To monitor DA efficiently and conveniently, a Ag nanozyme strengthened by bioactive folic acid (FA@AgNPs) was developed by homogeneous redox assembly. After the microstructure and performance were characterized in detail, it was noted that the proposed FA@AgNPs possessed superior peroxidase-like activity due to the ultra-small Ag nanoparticles and multiple amino, hydroxyl, and aromatic rings in FA. FA@AgNPs accelerated the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) with a low Michaelis constant (K_m) and high maximal reaction rate (V_max). Importantly, the characteristic absorbance intensity of FA@AgNPs-TMB-H₂O₂ at 652 nm (A₆₅₂) was exclusively deteriorated in the presence of trace DA, accompanied by a visual color change from blue to colorless. Under the optimized conditions (pH 4.0, 300 μL 1.5 mM TMB, 300 μL 1.0 M H₂O₂ and incubated for 30 min at room temperature), there expressed an excellent linear relationship between lgA₀/A₆₅₂ and c_DA from 1.0 ×10^-8 to 6.67×10^-6 mol/L with a low limit detection of 7.1×10^-10 mol/L (S/N=3). When applied for monitoring of DA in real fruit juice and pharmaceutical samples, the recovery was between 96.6% and 104.9%, with RSD less than 2.2%. The enhanced peroxidase-like activity of the FA@AgNP system and its selective recognition mechanism for DA are also proposed.

A neoteric dual-channel spectral sensor for wide-range pH detection based on variables in UV-vis peak and intensity

A water-soluble 2',4',6'-trihydroxy phenylazo luminol dye (THPL) with a D-π-A conjugated structure was developed for the first time for the dual-channel spectral sensing of a wide-range of pH values in aqueous solutions, using phloroglucinol as the electron-donating group, heterocycle amide luminol as the electron-accepting one and -NN- as the π-conjugated bridge. Its UV-vis absorption spectrum, especially its spectral response to pH, was investigated in detail. The results confirmed that the proposed THPL exhibited superior UV-vis spectral properties, a strong molar absorption coefficient (ε_max = 3.35 × 10⁴ L mol^-1 cm^-1) and a small half-band width of ca. 126 nm. In particular, either the absorption intensity (Abs) or peak (λ_max) changed linearly with pH values from 3.0 to 10.0 under the optimized conditions. Notably, THPL expressed an exclusive dual-channel spectral response to pH, i.e., Abs (a.u.) = 0.1316 + 0.0278 pH (R² = 0.9921), λ_max = 441.5 - 6.64 pH (R² = 0.9968, pH = 3.0-6.0) and λ_max = 359.6 + 7.38 pH (R² = 0.9879, pH = 6.0-10.0). Under the optimized conditions, THPL was applied to detect pH values in some aqueous and fruit juice samples with satisfactory results. The reversible recognition mechanism was deduced by UV-vis titration, ¹H NMR titration and theoretical calculation.

Nature of intermolecular interaction in squaraine dimers

Squaraine dyes are known for their particular optical properties. They exhibit intense photochemically stable fluorescence in usually (near) infra red region that can be quenched by intermolecular interactions. Moreover, even the centrosymmetric dyes feature non-zero second harmonic generation upon aggregation. Therefore, the detailed knowledge of the squaraine dye interaction nature both in homogenic aggregates and with other species present in the environment can be of importance for the design of new materials of desired properties. In the present study, interaction in squaraine dimers is investigated with quantum chemistry tools. Four structures: two stacked and two hydrogen-bonded are analyzed in terms of supermolecular approach and symmetry-adapted perturbation theory. MP2C/aug-cc-pVTZ supermolecular calculations confirm the particular stability of the stacked dimers and the favoured dispersion attraction for the long-displaced system.

UV-vis spectral property of a multi-hydroxyl Schiff-base derivative and its colorimetric response to some special metal ions

A multi-hydroxyl Schiff-base derivative, N-2'-hydroxyl-1'-naphthyl methylene-2-amino phenol (HNMAP), was synthesized and characterized by FTIR, ¹H NMR and UV-vis spectroscopy. It was noted to find there was great effect for solvent and pH on the UV-vis spectroscopy of HNMAP. Especially, some metal ions could make its UV-vis spectra changed regularly with different time-resolved effects. For example, a real-time and multi-wavelength response to Fe²⁺ at 520 nm, 466 nm and 447 nm and a quite slow one about 26 min to Fe³⁺ at 447 nm and 466 nm, respectively. Under the optimized conditions, the changes in the corresponding absorption intensities at above wavelengths were in proportion to c_Fe²⁺ or c_Fe³⁺ during respectively partitioned linear ranges, which realized to quantitatively detect Fe²⁺ or Fe³⁺ with a large linear range more than two orders of magnitude. A 1:1 complex mode for HNMAP-Fe²⁺ and 1:2 for HNMAP-Fe³⁺ were proposed from UV-vis spectral titration and Job's plot. HNMAP would be a potential sensor for colorimetric detection of Fe²⁺ and Fe³⁺ in practice.

Magnetic response of chlorophyll self-assembly within hydrogel: a mechanistic approach towards enhanced photoharvesting

Self-assembly of chlorophyll-a (Chl-a) molecules within a protein environment serves as the key factor behind controlled and efficient light energy harvesting in natural photosystems. Long-range ordering among supramolecular structures in terms of spin–orbit coupling and edge effect helps in untrapping of excitons in the disordered energy landscape. Mimicking the photosynthetic machinery would give a new paradigm for organic photovoltaic material design where a large amount of disorder exists. In this paper, we report the experimental evidence of room temperature magnetic domain wall formation and edge effect along with spin flop canting in self-assembled Chl-a within hydrogel matrix via SQUID magnetometry. This was further correlated with intermolecular coupling and exciton delocalization through specific arrangements of self-assembly as evident from NMR spectral and photophysical characteristics. The data cumulatively suggest electronic backscattering protection which is also substantiated by the ferroelectric behavior coming from coexisting symmetry lowering. Here the polarization evolves through primary distribution of π electronic density along with a photoresponsive IV loop, similar to the photoprotection of photosynthesis. This work thus proposes a promising design principle for room temperature Chl-a based biomimetic systems efficient in photoharnessing.

Chlorophyll molecular-arrangement, geometry and coupling result in magnetic domain wall as well as edge effect. These facilitate topologically protected ultrafast energy migration, where back scattering of exciton is restricted.

Highly photostable wide-dynamic-range pH sensitive semiconducting polymer dots enabled by dendronizing the near-IR emitters

One constraint of semiconducting polymer dots (Pdots), especially those with near-IR emission, is their low effective emitter ratio (∼1.5 mole percent), which limits their pH sensing performance. The other critical issue of existing Pdot-based pH sensors is their poor photostability. To address these issues, we developed a series of Pdots by dendronizing the squaraine-based pH responsive near-IR emitter, which is covalently incorporated into the polyfluorene (PFO) backbone. The fluorescence self-quenching of the NIR squaraine emitter was effectively suppressed at a high emitter concentration of 5 mole percent. Through controlling the individually incomplete energy transfer from the amorphous PFO donor to the blue β-phase PFO and NIR squaraine emitter, we obtained a ratiometric pH sensor with simultaneously improved pH sensitivity, brightness, and photostability. The Pdots showed a fast and reversible pH response over the whole biological pH range of 4.7 to 8.5. Intracellular pH mapping was successfully demonstrated using this ultra-bright and photostable Pdot-based pH indicator.

A modified fluorescein derivative with improved water-solubility for turn-on fluorescent determination of Hg2+ in aqueous and living cells

To improve the water-solubility of heavy-metal sensing materials, a modified fluorescein-based derivative, acryloyl fluorescein hydrazine (ACFH), was designed and developed by incorporating a non-hydrogen-bonding group into the conjugated molecule for weakening intermolecular hydrogen-bonding interactions. In neutral water environments, ACFH presented a fluorescence-enhancement performance at λ_max=512nm in the presence of Hg²⁺, which could be visualized by naked-eyes. Under the optimized conditions, the linear range of Hg²⁺ detection was 1.0-100×10^-9molL^-1 with a correlation coefficient of 0.9992 and a detection limit of 0.86×10^-9molL^-1. The recognition mechanism was confirmed to be a stable and irreversible 1:1 five-member ring complex between ACFH and Hg²⁺ with a coordination constant of 3.36×10⁹. ACFH would possess a potential application in detecting Hg²⁺ for biological assay with low cytotoxicity.

Fluorescent Poly(glycerol-co-sebacate) Acrylate Nanoparticles for Stem Cell Labeling and Longitudinal Tracking

The stable presence of fluorophores within the biocompatible and biodegradable elastomer poly(glycerol-co-sebacate) acrylate (PGSA) is critical for monitoring the transplantation, performance, and degradation of the polymers in vivo. However, current methods such as physically entrapping the fluorophores in the polymer matrix or providing a fluorescent coating suffer from rapid leakage of fluorophores. Covalent conjugation of fluorophores with the polymers and the subsequent core-cross-linking are proposed here to address this challenge. Taking rhodamine as the model dye and PGSA nanoparticles (NPs) as the model platform, we successfully showed that the synthesized rhodamine-conjugated PGSA (PGSAR) NPs only released less than 30% rhodamine at day 28, whereas complete release of dye occurred for rhodamine-encapsulated PGSA (PGSA-p-R) NPs at day 7 and 57.49% rhodamine was released out for the un-cross-linked PGSAR NPs at day 28. More excitingly, PGSAR NPs showed a strong quantum yield enhancement (26.24-fold) of the fluorophores, which was due to the hydrophobic environment within PGSAR NPs and the restricted rotation of (6-diethylamino-3H-xanthen-3-ylidene) diethyl group in rhodamine after the conjugation and core-cross-linking. The stable presence of dye in the NPs and enhanced fluorescence allowed a longitudinal tracking of stem cells both in vitro and in vivo for at least 28 days.

An anti-fouling nanoplasmonic SERS substrate for trapping and releasing a cationic fluorescent tag from human blood solution

In bioenvironmental detection, surface-enhanced Raman scattering (SERS) signals are greatly affected by anti-specific biomolecule adsorption, which generates strong background noise, reducing detection sensitivity and selectivity. It is thus necessary to modify the SERS substrate surface to make it anti-fouling to maintain excellent SERS signals. Herein, we propose a zwitterionic copolymer, namely poly(glycidyl methacrylate-co-sulfobetaine methacrylate) (poly(GMA-co-SBMA)), for the surface modification of SERS substrates, which were fabricated and characterized spectroscopically. The copolymer was grafted onto Ag nanocubes (NCs) on an Ag surface with massive nanogaps via 1,2-ethanedithiol, which acted as a metal-insulator-metal (MIM) substrate. The high density of poly(GMA-co-SBMA) grafted near NCs favored the formation of connections between adjacent NCs, causing strong surface plasmon resonance at these junctions. With the zwitterionic-copolymer-modified surface, the adhesion of large biomolecules in platelet-rich plasma (PRP) solution can be effectively resisted, as determined from immunoassay and fibrinogen adsorption results. The SERS signals for malachite green (MG) in PRP solution (10^-6 M) were effectively distinguished using the copolymer-grafted MIM substrate. MG was deposited on adjacent copolymer-grafted NCs, which amplified the SERS signals. Moreover, the copolymer connected adjacent NCs, inducing the electromagnetic effect at copolymer-grafted surfaces, which improved the SERS mechanism. The hydration process restructured the MG-trapped copolymer-grafted surface, decreasing the number of MG characteristic peak regions and increasing that of the copolymer regions. These results reveal that grafting a copolymer onto an MIM substrate allows MG to be easily trapped and released in complex biomatrices and increases surface reproducibility due to anti-fouling, leading to high SERS enhancement.

Progress in the preparation and application of three-dimensional graphene-based porous nanocomposites

Due to high specific surface area, excellent conductivity, low mass density, good compatibility and elegant flexibility, three-dimensional graphene composites with interconnected porous structures possess unusual and novel physical and electronic properties, unsurpassed chemical functionalities and other attractive features. Therefore, different three-dimensional graphene-based nanoporous scaffolds have been extensively designed, prepared and investigated for practical applications in lithium-ion batteries, super-capacitors, solar cells, catalysis, thermal management, environment pollution enrichment and separation, and chemical sensors with high performance from both fundamental and technological viewpoints. To present readers with a better understanding of this kind of important porous material, in this feature article, we will highlight the main achievements made in the preparation of 3D graphene micro- and/or nano-architectures and their potential applications in the aforementioned fields.

Spectral properties of 4-(4-hydroxy-1-naphthylazo)benzenesulfonic acid and its application for colorimetric determination of trace Fe3+

A multifunctional dye, 4-(4-hydroxy-1-naphthylazo)benzenesulfonic acid was identified and synthesized and used to determine trace Fe³⁺ in three real environmental water samples. The mechanism of action between the dye and Fe³⁺ ion is discussed in detail.