Variables affecting ion release from resin-based materials containing calcium orthophosphate particles

OBJECTIVES

To investigate the influence of experimental variables on Ca2+ release from experimental resin-based materials containing dicalcium phosphate dihydrate (DCPD) particles.

METHODS

Experimental materials were prepared, both with BisGMA and TEGDMA and either 25 % or 50 % DCPD (by volume). Ca2+ release in deionized water (DW) was quantified using induced coupled plasma-optical emission spectrometry (ICP-OES, n = 3) according to the variables (1) frequency of DW renewal (weekly, biweekly, monthly or no renewal in 8 weeks), (2) volume of DW (5 mL, 10 mL or 50 mL) and (3) specimen dimensions (in mm, 9×2, 10x1, 5×4 or 5×1). Release kinetics was described using the semi-empirical Peppas-Sahlin model. Data were analyzed by two-way ANOVA/Tukey test (alpha: 5 %).

RESULTS

Weekly and/or biweekly DW renewal increased Ca2+ release compared to monthly and no renewal (p < 0.001). Ca2+ release was higher in 50 mL compared to 10 mL (50 % DCPD) and 5 mL (25 % DCPD) (p < 0.001). The specimen with the highest area-to-volume ratio (5×1 mm) presented the highest release expressed in μg/cm2 or as fractional (i.e., % of the total Ca in the specimen, p < 0.001). At early stages and high DW volumes, diffusion was the main release mechanism, particularly for the 25 % DCPD material. Polymer relaxation becomes more important than diffusion over time, most noticeably for the 50 % DCPD material.

SIGNIFICANCE

Researchers and clinicians must be aware of the fact that ion release is influenced by a large number of experimental variables, including (but not limited to) immersion medium renewal frequency, volume of immersion medium and specimen dimensions.

Potential Roles of the Glass Transition Temperature of PLGA Microparticles in Drug Release Kinetics

Poly(lactic-co-glycolic acid) (PLGA) has been used for long-acting injectable drug delivery systems for more than 30 years. The factors affecting the properties of PLGA formulations are still not clearly understood. The drug release kinetics of PLGA microparticles are influenced by many parameters associated with the formulation composition, manufacturing process, and post-treatments. Since the drug release kinetics have not been explainable using the measurable properties, formulating PLGA microparticles with desired drug release kinetics has been extremely difficult. Of the various properties, the glass transition temperature, T_g, of PLGA formulations is able to explain various aspects of drug release kinetics. This allows examination of parameters that affect the T_g of PLGA formulations, and thus, affecting the drug release kinetics. The impacts of the terminal sterilization on the T_g and drug release kinetics were also examined. The analysis of drug release kinetics in relation to the T_g of PLGA formulations provides a basis for further understanding of the factors controlling drug release.

Preparation and Characterization of Electrospun Collagen Based Composites for Biomedical Applications

Electrospinning is a widely used technology for obtaining nanofibers from synthetic and natural polymers. In this study, electrospun mats from collagen (C), polyethylene terephthalate (PET) and a blend of the two (C-PET) were prepared and stabilized through a cross-linking process. The aim of this research was to prepare and characterize the nanofiber structure by Fourier-transform infrared with attenuated total reflectance spectroscopy (FTIR-ATR) in close correlation with dynamic vapor sorption (DVS). The studies indicated that C-PET nanofibrous mats shows improved mechanical properties compared to collagen samples. A correlation between morphological, structural and cytotoxic proprieties of the studied samples were emphasized and the results suggest that the prepared nanofiber mats could be a promising candidate for tissue-engineering applications, especially dermal applications.

Towards a Deeper Understanding of Creep and Physical Aging Behavior of the Emulsion Polymer Isocyanate

Information of the relaxation behaviors of polymer film is crucial to judge the durability of emulsion polymer isocyanate (EPI) as a structural adhesive for bonding timber-based products. A sequence of tensile creep tests and free volume evaluation of the cured EPI adhesive films during isothermal condition were carried out by dynamic mechanical analysis and positron annihilation lifetime spectroscopy, respectively. It is the first time to explore the creep response and physical aging of the EPI film, as well as associated microstructural evolution. The results indicate that the creep characteristics of the glassy EPI coating intimately depend upon the crosslinker and elapsed time, and the ideal momentary creep master curve can be constructed in terms of modified horizontal shifting method. Furthermore, the relaxation process is found to be dominated by vacancy diffusion mechanism. In addition, increasing the polymeric isocyanate content can significantly enhance the resistance to creep deformation of EPI films, but also accelerate the physical aging process. Due to a higher packing degree of pure polymer films, the EPI films with aqueous emulsified isocyanate exhibit much better relaxation resistance compared to that with general isocyanate crosslinker.

A Coupled Thermodynamic Model for Transport Properties of Thin Films during Physical Aging

A coupled diffusion model based on continuum thermodynamics is developed to quantitatively describe the transport properties of glassy thin films during physical aging. The coupled field equations are then embodied and applied to simulate the transport behaviors of O₂ and CO₂ within aging polymeric membranes to validate the model and demonstrate the coupling phenomenon, respectively. It is found that due to the introduction of the concentration gradient, the proposed direct calculating method on permeability can produce relatively better consistency with the experimental results for various film thicknesses. In addition, by assuming that the free volume induced by lattice contraction is renewed upon CO₂ exposure, the experimental permeability of O₂ within Matrimid^® thin film after short-time exposure to CO₂ is well reproduced in this work. Remarkably, with the help of the validated straightforward permeability calculation method and free volume recovery mechanism, the permeability behavior of CO₂ is also well elucidated, with the results implying that the transport process of CO₂ and the variation of free volume are strongly coupled.

Water Vapor Sorption Properties of Polyethylene Terephthalate over a Wide Range of Humidity and Temperature

The dynamic and equilibrium water vapor sorption properties of amorphous polyethylene terephthalate were determined via gravimetric analysis over a wide range of temperatures (23-70 °C) and humidities (0-90% RH). At low temperature and relative humidity, the dynamics of the sorption process was Fickian. Increasing the temperature or relative humidity induced a distinct up-swing effect, which was associated with a plasticization/clustering phenomenon. For high temperatures and relative humidity, a densification of the polymer was evidenced. In addition to the classical Fickian diffusion, a new parameter was introduced to express the structural modifications of PET. Finally, two partial pressures were defined as thresholds that control the transition between these three phases. A simplified state diagram was finally proposed. In addition, the thermal dependence of these sorption modes was also determined and reported. The enthalpy of Henry's water sorption and the activation energy of diffusion were independent of vapor pressure and followed an Arrhenius law.

Synergistic action of thermoresponsive and hygroresponsive elements elicits rapid and directional response of a bilayer actuator

A bilayer actuator composed of thermoresponsive and thermo/hygroresponsive elements is developed, which undergoes fast, directional and autonomous curling with a speed of up to 0.7 m s⁻¹and recovers its shape by hydration.