Refining the mechanism of CO2 and H2 activation over gold-ceria catalysts by IR modulation excitation spectroscopy

The activation and utilization of the greenhouse gas CO2 is of great interest for the energy transition as a fossil-free carbon source for mitigating climate change. CO2 hydrogenation via the reverse water-gas shift reaction (RWGSR) converts CO2 to CO, a crucial component of syngas, enabling further transformation by means of the Fischer-Tropsch process. In this study, we unravel the detailed mechanism of the RWGSR on low-loaded Au/CeO2 catalysts using IR modulation excitation spectroscopy (MES), by periodically modulating the concentration of the reactants, followed by phase-sensitive detection (PSD). Applying such a MES-PSD approach to Au/CeO2 catalysts during RWGSR gives direct spectroscopic evidence for the active role of gold hydride, bidentate carbonate and hydroxyl species in the reaction mechanism, while disproving the participation of other species such as formate. Our results highlight the potential of modulation excitation spectroscopy combined with phase-sensitive detection to provide new mechanistic insight into catalytic reactions not accessible by steady-state techniques, including a profound understanding of the sequence of reaction steps.

Self-Promoted H2 Formation: The Feasibility of Photoinduced CO Removal for Lossless Hydrogen Purification

A photoinduced radical reaction operated at low temperature can be used to remove trace CO from a H₂ stream by minimizing the reverse water-gas shift. However, H₂ consumption resulting from nonselective oxidation by hydroxyl radicals becomes an obstacle to practical hydrogen purification. Inspired by hydrogen exchange transfer, we demonstrate here that molecular hydrogen can promote H₂ formation from hydrogen radicals, which are generated from the reaction of CO and H₂ with hydroxyl radicals. The slight increment in H₂ along with the radical reaction encouraged us to configure a photocatalytic hydrogen purification fixed-bed reactor, which can reduce CO to ≤1 ppm in the H₂ stream.

Carbon Dioxide Conversion on Supported Metal Nanoparticles: A Brief Review

The increasing concentration of anthropogenic CO2 in the air is one of the main causes of global warming. The Paris Agreement at COP 21 aims to reach the global peak of greenhouse gas emissions in the second half of this century, with CO2 conversion towards valuable added compounds being one of the main strategies, especially in the field of heterogeneous catalysis. In the current search for new catalysts, the deposition of metallic nanoparticles (NPs) supported on metal oxides and metal carbide surfaces paves the way to new catalytic solutions. This review provides a comprehensive description and analysis of the relevant literature on the utilization of metal-supported NPs as catalysts for CO2 conversion to useful chemicals and propose that the next catalysts generation can be led by single-metal-atom deposition, since in general, small metal particles enhance the catalytic activity. Among the range of potential indicators of catalytic activity and selectivity, the relevance of NPs’ size, the strong metal–support interactions, and the formation of vacancies on the support are exhaustively discussed from experimental and computational perspective.

A Review of CeO2 Supported Catalysts for CO2 Reduction to CO through the Reverse Water Gas Shift Reaction

The catalytic conversion of CO2 to CO by the reverse water gas shift (RWGS) reaction followed by well-established synthesis gas conversion technologies could be a practical technique to convert CO2 to valuable chemicals and fuels in industrial settings. For catalyst developers, prevention of side reactions like methanation, low-temperature activity, and selectivity enhancements for the RWGS reaction are crucial concerns. Cerium oxide (ceria, CeO2) has received considerable attention in recent years due to its exceptional physical and chemical properties. This study reviews the use of ceria-supported active metal catalysts in RWGS reaction along with discussing some basic and fundamental features of ceria. The RWGS reaction mechanism, reaction kinetics on supported catalysts, as well as the importance of oxygen vacancies are also explored. Besides, recent advances in CeO2 supported metal catalyst design strategies for increasing CO2 conversion activity and selectivity towards CO are systematically identified, summarized, and assessed to understand the impacts of physicochemical parameters on catalytic performance such as morphologies, nanosize effects, compositions, promotional abilities, metal-support interactions (MSI) and the role of selected synthesis procedures for forming distinct structural morphologies. This brief review may help with future RWGS catalyst design and optimization.

Elucidating Active CO–Au Species on Au/CeO2(111): A Combined Modulation Excitation DRIFTS and Density Functional Theory Study

In this work we elucidate the main steps of the CO oxidation mechanism over Au/CeO2(111), clarifying the course of CO adsorption at a broad variety of surface sites as well as of transmutations of one CO species into another. By combining transient spectroscopy with DFT calculations we provide new evidence that the active centers for CO conversion are single gold atoms. To gain insight into the reaction mechanism, we employ Modulation Excitation (ME) DRIFT spectroscopy in combination with the mathematical tool of Phase Sensitive Detection to identify the active species and perform DFT calculations to facilitate the assignments of the observed bands. The transient nature of the ME-DRIFTS method allows us to sort the observed species temporally, providing further mechanistic insight. Our study highlights the potential of combined transient spectroscopy and theoretical calculations (DFT) to clarify the role of adsorbates observed and to elucidate the reaction mechanism of CO oxidation over supported gold and other noble-metal catalysts.

Fundamental Aspects of Ceria Supported Au Catalysts Probed by In Situ/Operando Spectroscopy and TAP Reactor Studies

The discovery of the activity of dispersed gold nanoparticles three decades ago paved the way for a new era in catalysis. The unusual behavior of these catalysts sparked many questions about their working mechanism. In particular, Au/CeO₂ proved to be an efficient catalyst in several reactions such as CO oxidation, water gas shift, and CO₂ reduction. Here, by employing findings from operando X‐ray absorption spectroscopy at the near and extended Au and Ce L_III energy edges, we focus on the fundamental aspects of highly active Au/CeO₂ catalysts, mainly in the CO oxidation for understanding their complex structure‐reactivity relationship. These results were combined with findings from in situ diffuse reflectance FTIR and Raman spectroscopy, highlighting the changes of adlayer and ceria defects. For a comprehensive understanding, the spectroscopic findings will be supplemented by results of the dynamics of O₂ activation obtained from Temporal Analysis of Products (TAP). Merging these results illuminates the complex relationship among the oxidation state, size of the Au nanoparticles, the redox properties of CeO₂ support, and the dynamics of O₂ activation.

Molybdenum Oxide Supported on Ti3AlC2 is an Active Reverse Water-Gas Shift Catalyst

MAX phases are layered ternary carbides or nitrides that are attractive for catalysis applications due to their unusual set of properties. They show high thermal stability like ceramics, but they are also tough, ductile, and good conductors of heat and electricity like metals. Here, we study the potential of the Ti₃AlC₂ MAX phase as a support for molybdenum oxide for the reverse water-gas shift (RWGS) reaction, comparing this new catalyst to more traditional materials. The catalyst showed higher turnover frequency values than MoO₃/TiO₂ and MoO₃/Al₂O₃ catalysts, due to the outstanding electronic properties of the Ti₃AlC₂ support. We observed a charge transfer effect from the electronically rich Ti₃AlC₂ MAX phase to the catalyst surface, which in turn enhances the reducibility of MoO₃ species during reaction. The redox properties of the MoO₃/Ti₃AlC₂ catalyst improve its RWGS intrinsic activity compared to TiO₂- and Al₂O₃-based catalysts.

The Sintering of Au Nanoparticles on Flat {100}, {111} and Zigzagged {111}-Nanofacetted Structures of Ceria and Its Influence on Catalytic Activity in CO Oxidation and CO PROX

The thermal stability of Au nanoparticles on ceria support of various morphology (nanocubes, nanooctahedra, and {111}-nanofacetted nanocubes) in oxidizing and reducing atmospheres was investigated by electron microscopy. A beneficial effect of the reconstruction of edges of ceria nanocubes into zigzagged {111}-nanofacetted structures on the inhibition of sintering of Au nanoparticles was shown. The influence of different morphology of Au particles on various ceria supports on the reducibility and catalytic activity in CO oxidation, and CO PROX of Au/ceria catalysts was also investigated and discussed. It was shown, that ceria nanocubes with flat {110} terminated edges are more suitable as a support for Au nanoparticles, used to catalyze CO oxidation, than zigzagged {111}- nanofacetted structures.

Graphic Abstract

Boosting the catalysis of gold by O2 activation at Au-SiO2 interface

Supported gold (Au) nanocatalysts have attracted extensive interests in the past decades because of their unique catalytic properties for a number of key chemical reactions, especially in (selective) oxidations. The activation of O₂ on Au nanocatalysts is crucial and remains a challenge because only small Au nanoparticles (NPs) can effectively activate O₂. This severely limits their practical application because Au NPs inevitably sinter into larger ones during reaction due to their low Taman temperature. Here we construct a Au-SiO₂ interface by depositing thin SiO₂ layer onto Au/TiO₂ and calcination at high temperatures and demonstrate that the interface can be not only highly sintering resistant but also extremely active for O₂ activation. This work provides insights into the catalysis of Au nanocatalysts and paves a way for the design and development of highly active supported Au catalysts with excellent thermal stability.

The development of sintering resistant supported Au catalysts with high activity still remains a challenge. Here the authors construct a Au-SiO₂ interface by depositing SiO₂ thin layer onto Au/TiO₂ catalyst which shows very high activity in CO oxidation even after calcination at 800 °C.

Recent Advances in Design of Gold-Based Catalysts for H2 Clean-Up Reactions

Over the past three decades, supported gold nanoparticles have demonstrated outstanding properties and continue to attract the interest of the scientific community. Several books and comprehensive reviews as well as numerous papers cover a variety of fundamental and applied aspects specific to gold-based catalyst synthesis, characterization by different techniques, relationship among catalyst support features, electronic and structural properties of gold particles, and catalytic activity, reaction mechanism, and theoretical modeling. Among the Au-catalyzed reactions targeting environmental protection and sustainable energy applications, particular attention is paid to pure hydrogen production. The increasing demands for high-purity hydrogen for fuel cell systems caused a renewed interest in the water-gas shift reaction. This well-known industrial process provides an attractive way for hydrogen generation and additional increase of its concentration in the gas mixtures obtained by processes utilizing coal, petroleum, or biomass resources. An effective step for further elimination of CO traces from the reformate stream after water-gas shift unit is the preferential CO oxidation. Developing highly active, stable, and selective catalysts for these two reactions is of primary importance for efficient upgrading of hydrogen purity in fuel cell applications. This review aims to extend the existing knowledge and understanding of the properties of gold-based catalysts for H2 clean-up reactions. In particular, new approaches and strategies for design of high-performing and cost-effective formulations are addressed. Emphasis is placed on efforts to explore appropriate and economically viable supports with complex composition prepared by various synthesis procedures. Relevance of ceria application as a support for new-generation WGS catalysts is pointed out. The role of the nature of support in catalyst behavior and specifically the existence of an active gold-support interface is highlighted. Long-term stability and tolerance toward start-up/shutdown cycling are discussed. Very recent advances in catalyst design are described focusing on structured catalysts and microchannel reactors. The latest mechanistic aspects of the water-gas shift reaction and preferential CO oxidation over gold-based catalysts from density functional theory calculations are noted because of their essential role in discovering novel highly efficient catalysts.

Influence of CO on the Activation, O-Vacancy Formation, and Performance of Au/ZnO Catalysts in CO2 Hydrogenation to Methanol

The impact of CO on the activation and reaction characteristics of Au/ZnO catalysts in methanol synthesis from a CO₂/H₂ mixture was studied by kinetic, near ambient pressure X-ray photoelectron spectroscopy and X-ray absorption spectroscopy at the O K-edge, together with in situ Foureir transform infrared measurements. Transient measurements under up to industrial reaction conditions (50 bar, 240 °C) show a pronounced transient increase of the activity for methanol formation from CO₂/H₂ after exposure to a CO/H₂ reaction gas mixture, while the steady-state activity is similar to that observed directly after oxidative pretreatment. For the reaction in CO/H₂, the much longer activation phase is accompanied by formation of CO₂ due to reaction of CO with the ZnO catalyst support. This leads to O-vacancy formation on the support at an extent significantly higher than in CO₂/H₂. The consequences of these findings on the mechanistic understanding of methanol formation from CO₂/H₂ on Au/ZnO and for ZnO-supported catalysts in general are discussed.

Ceria-Based Materials in Hydrogenation and Reforming Reactions for CO2 Valorization

Reducing greenhouse emissions is of vital importance to tackle the climate changes and to decrease the carbon footprint of modern societies. Today there are several technologies that can be applied for this goal and especially there is a growing interest in all the processes dedicated to manage CO2 emissions. CO2 can be captured, stored or reused as carbon source to produce chemicals and fuels through catalytic technologies. This study reviews the use of ceria based catalysts in some important CO2 valorization processes such as the methanation reaction and methane dry-reforming. We analyzed the state of the art with the aim of highlighting the distinctive role of ceria in these reactions. The presence of cerium based oxides generally allows to obtain a strong metal-support interaction with beneficial effects on the dispersion of active metal phases, on the selectivity and durability of the catalysts. Moreover, it introduces different functionalities such as redox and acid-base centers offering versatility of approaches in designing and engineering more powerful formulations for the catalytic valorization of CO2 to fuels.

Molecular-level understanding of reaction path optimization as a function of shape concerning the metal–support interaction effect of Co/CeO2 on water-gas shift catalysis

In this work, the active sites generated in hydrogen reduction and the reaction pathways for the water gas shift (WGS) reaction over Co/CeO₂ catalysts were studied by in situ XAS and XPS coupled with DFT+U calculations.

Tuning the metal-support interaction in the thermal-resistant Au-CeO2 catalysts for CO oxidation: influence of a mild N2 pretreatment

Pretreatment is very important for altering the catalytic properties of the supported noble metal catalysts in many heterogeneous reactions. In this study, a simple and mild pretreatment with N₂ has been reported to re-activate the Au–CeO₂ catalysts that were prepared by a deposition–precipitation method followed by calcination at 600 °C. Upon N₂ pretreatment at 200 °C, the metal-support interaction between Au nanoparticles (NPs) and CeO₂ was observed with the evidence of particular coverage of Au nanoparticles by CeO₂, electronic interactions and changes in CO adsorption ability. As a result, the CO oxidation activity of the pretreated Au–CeO₂ catalysts largely improved compared with those without any pretreatment and even with those subjected to H₂ and O₂ pretreatments. N₂ pretreatment also makes the Au NPs more resistant to sintering at high temperature. Furthermore, this mild pretreatment strategy can provide a potential approach to improve the thermal stability of other supported noble metal catalysts.

The degree of encapsulation for Au–CeO₂ catalysts was identical to the catalysts exhibiting metal-support interaction, which improved the CO oxidation activity.

Monodisperse Metal-Organic Framework Nanospheres with Encapsulated Core-Shell Nanoparticles Pt/Au@Pd@{Co2(oba)4(3-bpdh)2}4H2O for the Highly Selective Conversion of CO2 to CO

A new microporous metal-organic framework (MOF) with formula {Co₂(oba)₄(3-bpdh)₂}4H₂O [oba = 4,4'-oxybis(benzoic acid); 3-bpdh = N, N'-bis-(1-pyridine-3-yl-ethylidene)-hydrazine] was assembled, and its morphology was found to undergo a microrod-to-nanosphere transformation with temperature variation. Core-shell Au@Pd functional nanoparticles (NPs) were successfully encapsulated in the center of the monodisperse nanospheres, and Pt NPs were well-dispersed and fully immobilized on the surface of Au@Pd@1Co to build the Pt/Au@Pd@1Co composites, which exhibited NPs catalytic activity for the reverse water gas shift reaction. The core-shell Au@Pd NPs in MOF significantly enchanced the CO selectivity of the catalyst, and the Pt NP loading on the surface of the nanosphere afforded a desirable CO₂ conversion.

Theoretical insights into ω-alkynylfuran cycloisomerisation catalyzed by Au/CeO2(111): the role of the CeO2(111) support

ω-Alkynylfuran cycloisomerisation on CeO₂(111)-supported Au clusters with different sizes was explored to unveil the role of the CeO₂(111) support, including charge transfer effects and interactions.

Forty years of temporal analysis of products

A detailed understanding of reaction mechanisms and kinetics is required in order to develop and optimize catalysts and catalytic processes. Temporal analysis of products (TAP) is an instrument capable of providing such understanding.

Mild activation of CeO2-supported gold nanoclusters and insight into the catalytic behavior in CO oxidation

We report a new activation method and insight into the catalytic behavior of a CeO2-supported, atomically precise Au144(SR)60 nanocluster catalyst (where thiolate -SR = -SCH2CH2Ph) for CO oxidation. An important finding is that the activation of the catalyst is closely related to the production of active oxygen species on CeO2, rather than ligand removal of the Au144(SR)60 clusters. A mild O2 pretreatment (at 80 °C) can activate the catalyst, and the addition of reductive gases (CO or H2) can enhance the activation effects of O2 pretreatment via a redox cycle in which CO could reduce the surface of CeO2 to produce oxygen vacancies-which then adsorb and activate O2 to produce more active oxygen species. The CO/O2 pulse experiments confirm that CO is adsorbed on the cluster catalyst even with ligands on, and active oxygen species present on the surface of the pretreated catalyst reacts with CO pulses to generate CO2. The Au144(SR)60/CeO2 exhibits high CO oxidation activity at 80 °C without the removal of thiolate ligands. The surface lattice-oxygen of the support CeO2 possibly participates in the oxidation of CO over the Au144(SR)60/CeO2 catalyst.