A captivating approach to elevate the detection of Al3+ ions incorporates the utilization of a tripodal receptor intricately embellishing the surface of zinc oxide

The FDA (Food and Drug Administration, (USA)) lists ZnO as a material that is widely acknowledged to be safe. ZnO NPs with a range of tiny particle sizes were made using the precipitation process. ZnO nanoparticles' surface is embellished with a tripodal sensor containing naphthol units. The assembly with the same receptor decorated on ZnO NPs is contrasted with the cation detection capabilities of the purified tripodal receptor. The UV-visible spectrophotometric analysis was conducted to study the state transitions of the receptor and the decorated ZnO receptor. A positive selectivity to Al3+ cations is determined by the fluorescence study under ideal circumstances. The particle size and surface morphologies are determined by DLS and SEM analysis for the same receptor - TP1 and embellished with a tripodal receptor TP2. Using a fluorescence switch-on Photoinduced Electron Transfer (PET) mechanism, the receptor coated on ZnO detects the presence of Al3+ ions with specificity. The binding constant value was determined using the B-H plot equation. Binding stoichiometry for [TP1-Al3+, TP2-Al3+] showed a 1:1 ratio. The fluorescence switches ON-OFF process of the ZnO surface adorned - TP2 with Tripodal receptor- TP1 was used to create molecular logic gates, which can function as a module for sensors and molecular switches. The addition of Na2EDTA in the solution of the [TP1; TP2 - Al3+] complex resulted in a noticeable reduction in the emission of fluorescence. This finding offers compelling support for the reversibility of the chemosensor. To enable the practical application of this sensor, we have developed a cassette containing receptors TP1 and TP2. Successfully, it can detect Al3+ metal ions. We performed a comprehensive assessment of the dependability and appropriateness of our approach in measuring the concentration of Al3+ ions in wastewater produced by important industrial procedures.

Fluorometric and colorimetric sensor for selective detection of cyanide anion by dibenzosuberenone-based dihydropyridazine in aqueous solution

A new chemosensory based on deprotonation and intramolecular charge transfer (ICT) was developed to detect cyanide in food samples. Deprotonation was facilitated by increasing the acidity of the NH proton in the dibenzosuberenone-based dihydropyridazine chemosensor Pz3 with -CN substituents. Addition of cyanide to acetonitrile and aqueous acetonitrile solution (1/9) of Pz3 resulted in their significant color change from colorless to purple in visible light, accompanied by a strong red shift in the absorption spectrum. Meanwhile, the near-infrared (NIR) emission (ex. 525 nm, em. 670 nm) of Pz3- resulting from deprotonation showed fluorescence switching behavior to detect the cyanide anion. While the acidic NH protons interact with basic anions as F-, CN-, OAc- and H2PO4- in organic solution (MeCN), just CN ions interact with in aqueous organic solutions (H2O-MeCN 1/9 HEPES pH 7.4). The limit of detection of cyanide from the fluorescence spectrum is 80 nM, which is well below the value determined for drinking water by World Health Organization (WHO). The interference effect of cations and anions showed that Pz3 could play an important role in the determination of waste NaCN. In addition, Pz3 successfully carried out the selective detection of cyanide in food samples such as bitter almonds and sprouting potatoes.

AIEE activated Pyrene-Dansyl coupled FRET probe for discriminating detection of lethal Cu2+ and CN-: Bio-Imaging, DNA binding studies and prompt prognosis of Menke's disease

In present work a pyrene-dansyl dyad functionalized chemoreceptor, DPNS is unveiled towards ultrasensitive chromo-fluorogenic detection of heavy and transition metal ions (HTMs) like Cu2+ and pernicious CN-. It demonstrated distinct chromogenic responses; colorless to faint yellow (Cu2+), intense yellow (CN-) from contaminant aqueous sources. Cu2+ instigated alteration in DPNS fluorescence from feeble emission to sparkling green with LOD: 37.75 × 10-9 M, cyan emission for CN- having LOD 61.51 × 10-8M. In particular, chemical scaffold of DPNS consists of -C = N, O = S = O donor entitities that escalates overall polarity thereby providing an excellent binding pocket for simultaneous Cu2+ and CN- recognition with distinct photophysical signaling. Impressively, presence of two fluorophoric moieties triggers FRET, CHEF phenomenon. The conceivable host:guest interactive pathway is manifested by LMCT- FRET-PET-CHEF, C = N isomerization for Cu2+ and ICT-H-bonding for CN-. An exquisite experimental and theoretical corroboration further strengthened the recognition phenomenon. In addition owing to pyrene excimer formation, DPNS exhibits AIEE with increasing water fraction. Notably, DPNS could successfully undergo intracellular tracking of Cu2+ in Tecoma Stans, Peperomia Pellucida. DPNS•••Cu2+ adduct displayed significant intercalative DNA binding activity rationalized by spectral investigation, competitive EB binding, viscosity study. The overall findings, excellent properties endows DPNS a potential contender towards discriminative detection of Cu2+ and CN- like toxic industrial contaminants.

A Handy Chemical Sensor Based on Benzaldehyde and Imidazo[1,2-a]pyridine Mixture for Naked-eye Colorimetric and Fluorescent Detection of F. J Fluoresc 2023;33:2381-2390. [PMID: 37071230 DOI: 10.1007/s10895-023-03195-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Upon the Schiff base condensation reaction of imidazo[1,2-a]pyridine-2-carbohydrazide and 2,5-dihydroxybenzaldehyde, a bimodal colorimetric and fluorescent chemosensor 1o for assaying fluoride (F-) in DMSO was synthesized. The characterization of 1o structure was obtained by 1H NMR, 13C NMR and MS.The structure of 1o was characterized by 1H NMR, 13C NMR and MS. Under the presence of various anions, 1o could be applied for naked-eye and fluorescent detection of F- (naked eye: colorless to yellow; fluorescence: dark to green) and displayed promising performance, such as high selectivity and sensitivity, as well as a low detection limit. Upon calculation, the detection limit of chemosensor 1o for F- was 193.5 nM, which is well below the allowed maximum value of F- (1.5 mg/L) by WHO. As the intermolecular proton transfer mechanism induced "turn-on" fluorescent signal and naked-eye color change of F- to 1o through deprotonation effect, which was confirmed by Job's plot curve, mass spectrometry and 1H NMR titration. Alternatively, the chemosensor 1o can be effectively manufactured into test strips to detect fluoride in solid state, which is user-friendly with no additional equipment required.

Biosensors with Boronic Acid-Based Materials as the Recognition Elements and Signal Labels

It is of great importance to have sensitive and accurate detection of cis-diol-containing biologically related substances because of their important functions in the research fields of metabolomics, glycomics, and proteomics. Boronic acids can specifically and reversibly interact with 1,2- or 1,3-diols to form five or six cyclic esters. Based on this unique property, boronic acid-based materials have been used as synthetic receptors for the specific recognition and detection of cis-diol-containing species. This review critically summarizes the recent advances with boronic acid-based materials as recognition elements and signal labels for the detection of cis-diol-containing biological species, including ribonucleic acids, glycans, glycoproteins, bacteria, exosomes, and tumor cells. We also address the challenges and future perspectives for developing versatile boronic acid-based materials with various promising applications.

In vitro biological activity of cobalt(II) complexes with salicylaldimine ligands in microbial and cancer cells

Background: More studies using cobalt complexes as drugs are needed. Results: The drug action of two cobalt salicylaldimines was determined. The complexes and amphotericin B (20 mg/ml) inhibited Candida albicans at 9-15 and 21 mm. This concentration of both ligands inhibited Staphylococcus aureus at 10 mm and one ligand inhibited Escherichia coli at 9 mm, but the complexes and ampicillin inhibited four bacteria at 9-20 and 21-26 mm. The ligands were inactive against cancer and normal cells, but the complexes and doxorubicin provided IC50 values of 28.18-54.19 and 9.66 μM against MCF-7 cells and 15.76-20.49 and 36.42 μM against BHK cells. Conclusion: The ligands' activity was much improved by complexation, although they remained substandard.

Alternative boronic acids in the detection of Mycolactone A/B using the thin layer chromatography (f-TLC) method for diagnosis of Buruli ulcer

BACKGROUND

Mycobacterium ulcerans is the causative agent of Buruli ulcer. The pathology of M. ulcerans disease has been attributed to the secretion of a potent macrolide cytotoxin known as mycolactone which plays an important role in the virulence of the disease. Mycolactone is a biomarker for the diagnosis of BU that can be detected using the fluorescent-thin layer chromatography (f-TLC) technique. The technique relies on the chemical derivatization of mycolactone A/B with 2-naphthylboronic acid (BA) which acts as a fluorogenic chemosensor. However, background interferences due to co-extracted human tissue lipids, especially with clinical samples coupled with the subjectivity of the method call for an investigation to find an alternative to BA.

METHODS

Twenty-six commercially available arylboronic acids were initially screened as alternatives to BA using the f-TLC experiment. UV-vis measurements were also conducted to determine the absorption maximum spectra of mycolactone A/B and myco-boronic acid adducts followed by an investigation of the fluorescence-enhancing ability of the boronate ester formation between mycolactone A/B and our three most promising boronic acids (BA15, BA18, and BA21). LC-MS technique was employed to confirm the adduct formation between mycolactone and boronic acids. Furthermore, a comparative study was conducted between BA18 and BA using 6 Polymerase Chain Reaction (PCR) confirmed BU patient samples.

RESULTS

Three of the boronic acids (BA15, BA18, and BA21) produced fluorescent band intensities superior to BA. Complexation studies conducted on thin layer chromatography (TLC) using 0.1 M solution of the three boronic acids and various volumes of 10 ng/µL of synthetic mycolactone ranging from 1 µL - 9 µL corresponding to 10 ng - 90 ng gave similar results with myco-BA18 adduct emerging with the most visibly intense fluorescence bands. UV-vis absorption maxima (λ_max) for the free mycolactone A/B was observed at 362 nm, and the values for the adducts myco-BA15, myco-BA18, and myco-BA21 were at 272 nm, 270 nm, and 286 nm respectively. The comparable experimental λ_max of 362 nm for mycolactone A/B to the calculated Woodward-Fieser value of 367 nm for the fatty acid side chain of mycolactone A/B demonstrate that even though 2 cyclic boronates were formed, only the boronate of the southern side chain with the chromophore was excited by irradiation at 365 nm. Fluorescence experiments have demonstrated that coupling BA18 to mycolactone A/B along the 1,3-diols remarkably enhanced the fluorescence intensity at 537 nm. High-Resolution Mass Spectrometer (HR-MS) was used to confirm the formation of the myco-BA15 adduct. Finally, f-TLC analysis of patient samples with BA18 gave improved BA18-adduct intensities compared to the original BA-adduct.

CONCLUSION

Twenty-six commercially available boronic acids were investigated as alternatives to BA, used in the f-TLC analysis for the diagnosis of BU. Three (3) of them BA15, BA18, and BA21 gave superior fluorescence band intensity profiles. They gave profiles that were easier to interpret after the myco-boronic acid adduct formation and in experiments with clinical samples from patients with BA18 the best. BA18, therefore, has been identified as a potential alternative to BA and could provide a solution to the challenge of background interference of co-extracted human tissue lipids from clinical samples currently associated with the use of BA.

Hierarchical Ti-MOF Microflowers for Synchronous Removal and Fluorescent Detection of Aluminum Ions

Bifunctional luminescence metal-organic frameworks with unique nanostructures have drawn ongoing attention for simultaneous determination and elimination of metal ions in the aqueous environment, but still remain a great challenge. In this work, three-dimensional hierarchical titanium metal-organic framework (Ti-MOF) microflowers were developed by a secondary hydrothermal method for not only highly sensitive and selective detection of Al(III), but also simultaneously efficient decontamination. The resulting Ti-MOF microflowers with a diameter of 5-6 μm consisted of nanorods with a diameter of ∼200 nm and a length of 1-2 μm, which provide abundant, surface active sites for determination and elimination of Al(III) ions. Because of their substantial specific surface area and superior fluorescence characteristics, Ti-MOF microflowers are used as fluorescence probes for quantitative determination of Al(III) in the aqueous environment. Importantly, the specific FL enhancement by Al(III) via a chelation-enhanced fluorescence mechanism can be utilized for selective and quantitative determination of Al(III). The Al(III) detection has a linear range of 0.4-15 µM and a detection limit as low as 75 nM. By introducing ascorbic acid, interference of Fe(III) can be avoided to achieve selective detection of Al(III) under various co-existing cations. It is noteworthy that the Ti-MOF microflowers exhibit excellent adsorption capacity for Al(III) with a high adsorption capacity of 25.85 mg g^-1. The rapid adsorption rate is consistent with a pseudo-second order kinetic model. Ti-MOF is a promising contender as an adsorbent and a fluorescent chemical sensor for simultaneous determination and elimination of Al(III) due to its exceptional water stability, high porosity, and intense luminescence.

Mitochondria-Targeted Luminescent Organotin(IV) Complexes: Synthesis, Photophysical Characterization, and Live Cell Imaging

Five fluorescent ONO donor-based organotin(IV) complexes, [Sn^IV(L^1-5)Ph₂] (1-5), were synthesized by the one-pot reaction method and fully characterized spectroscopically including the single-crystal X-ray diffraction studies of 2-4. Detailed photophysical characterization of all compounds was performed. All the compounds exhibited high luminescent properties with a quantum yield of 17-53%. Additionally, the results of cellular permeability analysis suggest that they are lipophilic and easily absorbed by cells. Confocal microscopy was used to examine the live cell imaging capability of 1-5, and the results show that the compounds are mostly internalized in mitochondria and exhibit negligible cytotoxicity at imaging concentration. Also, 1-5 exhibited high photostability as compared to the commercial dye and can be used in long-term real-time tracking of cell organelles. Also, it is found that the probes (1-5) are highly tolerable during the changes in mitochondrial morphology. Thus, this kind of low-toxic organotin-based fluorescent probe can assist in imaging of mitochondria within living cells and tracking changes in their morphology.

New Rofecoxib-Based Mechanochromic Luminescent Materials and Investigations on Their Aggregation-Induced Emission, Acidochromism, and LD-Specific Bioimaging

Development of new mechanochromic luminescent (MCL) materials from aggregation-induced emission luminogens (AIEgens) has attracted wide attention due to their potential application in multiple areas. However, rational design and crafting of new MCL materials from the simple AIEgens skeleton is still a big challenge because of the undesirable concentration quenching effect. In this study, we have constructed a new class of MCL materials by adding one phenyl as a new rotator and incorporating one pair of electron donor (D) and acceptor (A) into the system of rofecoxib skeleton. This strategy endowed the compounds (Y1-Y8) with tunable emission behavior and some of them with the AIE effect and reversible MCL behavior. These properties may be caused by the highly twisted conformation and loosely molecular packing modes, which were elucidated clearly by analyzing the data of single-crystal X-ray diffraction, powder X-ray diffraction, and differential scanning calorimetry. Further investigation revealed that Y7 displayed acidochromic property due to the protonation of the nitrogen atom. Moreover, Y7, as a typical compound, showed its potential applications in the area of anticounterfeiting, pH sensor, and LD-specific bioimaging.

Design and optimization of sensitive analytical spectrophotometric method for micro determination of copper(II) from e-waste by using of novel chromogenic extractant

In this article, a novel spectrophotometric reagent 1-(pyrimidine)-4, 4, 6-trimethyl-1,4-dihydropyrimidine-2-thiol [PTPT] has been synthesized for liquid-liquid extraction and spectrophotometric determination of copper(II). The as-synthesized ligand has been selectively forms stable complex with copper(II) in basic medium (pH 9.0), in presence of mild pyridine the extraction and color stability has found to be synergistically enhanced. The equilibrium time is 10 min for effective extraction of copper(II) from organic phase and absorbance of colored organic complex in carbon tetrachloride is measured spectrophotometrically at λ_max 615 nm against reagent blank. The ternary complex of Cu(II)-PTPT-Py having molar ratio 1:2:2 (M:L:Py) showed green colored complex. The main factors influencing the achievement of synergistic extraction; i.e. pH, ligand concentration, type and volume of the dispersive organic solvents, equilibrium time, synergent concentration and foreign ions were investigated. The Beer's law was obeyed in the concentration range 1-20 μg mL^-1 of copper(II) and optimum concentration range is evaluated by Ringbom's plot and it is found that 2.5-25 μg mL^-1. In presence of pyridine, molar absorptivity and Sandell's sensitivity of copper(II)-PTPT complex is 2.80 × 10³ L mol^-1 cm^-1 and 0.226 μg cm^-2, respectively and in absence of pyridine, molar absorptivity and Sandell's sensitivity of copper(II)-PTPT complex is 1.35 × 10³ L mol^-1 cm^-1 and 0.469 μg cm^-2, respectively. The stoichiometry of the copper(II)-PTPT-pyridine complex was calculated by slope ratio method, mole ratio method and Job's method of continuous variation and it has been found as 1:2:2. No significant effects of potentially interfering species i.e. cations and anions were observed. The optimized method was applied for the determination of copper(II) in binary, synthetic mixtures and successfully applied for determination of copper(II) from e-waste samples. The standard deviation (R.S.D.) is 0.11% for n = 5 repetition. The reliability of the developed method is confirmed by comparison of experimental results with atomic absorption spectrophotometer.

A novel bifunctional chemosensor for bioimaging in living cells with highly sensitive colorimetric and fluorescence detection of CN− and Al3+

A novel colorimetric/fluorescent chemosensor (1o) was designed and synthesized for the detection of CN− and Al3+.

Naked-eye colorimetric and turn-on fluorescent Schiff base sensor for cyanide and aluminum (III) detection in food samples and cell imaging applications

A new efficient Schiff base sensor SB3 for fluorescent and colorimetric "naked-eye" "turn-on" sensing of cyanide anion (CN^-) with excellent sensitivity and selectivity was developed. The 4,4'-(perfluoropropane-2,2-diyl)bisphenol group and two phenyl groups were covalently linked by two C = N bonds to extend the conjugation length. The four hydroxyl groups can improve the water solubility of the SB3 sensor. The SB3 sensor exhibited high specificity towards CN^- by interrupting its intramolecular charge transfer, resulting in a color change and remarkable "turn-on" green fluorescence emission. The sensing mechanism is caused by the nucleophilic addition of CN- toward imine groups of the SB3 sensor, leading to breaks of the conjugation, fluorescent spectral changes, and color change. It was confirmed by ¹H NMR titration and Mass spectra. The detection limits for CN^- and Al³⁺obtained by fluorescence spectrum are 0.80 µM and 0.25 µM, respectively. The SB3 sensor can act as an efficient chemical sensor for detecting the CN^- and Al³⁺ ions under common environmental and physiological conditions (pH 5-12). Besides, the sensor can also detect CN^- in food materials (such as sprouting potatoes and cassava flour) and imaging CN^-in living cells with strong "turn-on" fluorescence at 490 nm. SB3 is an excellent CN^- sensor that exhibits some advantages, including easy synthesis, distinct fluorescence and color change, high selectivity, low detection limit, and good anti-interference ability to analyze solution and food samples, together with fluorescence cell imaging.

Involvement of a unique chemodosimeter in the selective estimation of noxious cyanide in common water hyacinth (Eichhornia crassipes): an environmental refinement

A naphthaldehyde-pyridoxal conjugated chemodosimeter (NPLC) was developed and employed for the sensitive and selective detection and estimation of cyanide in common water hyacinth (Eichhornia crassipes), a free floating macrophyte used in the phytoremediation process since ancient times. The non-fluorescent nature of the probe NPLC, directed by the possibility of excited state intramolecular proton transfer process (ESIPT), was promptly changed due to CN^- induced di-deprotonation of the probe. The naked eye color change and turn on vivid fluorescent color of NPLC was attributed to the inhibition of the ESIPT mechanism in the deprotonated NPLC (NPLC-D). The selective detection of cyanide ion in the nanomolar range (81 nM), among other interfering anions, makes it exclusive. The involvement of the probe in a chemodosimetric fashion toward cyanide was elucidated by experimental and computational studies.

Two-Dimensional Material-Based Colorimetric Biosensors: A Review

Two-dimensional (2D) materials such as graphene, graphene oxide, transition metal oxide, MXene and others have shown high potential for the design and fabrication of various sensors and biosensors due to their 2D layered structure and unique properties. Compared to traditional fluorescent, electrochemical, and electrical biosensors, colorimetric biosensors exhibit several advantages including naked-eye determination, low cost, quick response, and easy fabrication. In this review, we present recent advances in the design, fabrication, and applications of 2D material-based high-performance colorimetric biosensors. Potential colorimetric sensing mechanisms and optimal material selection as well as sensor fabrication are introduced in brief. In addition, colorimetric biosensors based on different 2D materials such as graphene, transition metal dichalcogenide/oxide, MXenes, metal-organic frameworks, and metal nanoplates for the sensitive detection of DNA, proteins, viruses, small molecules, metallic ions, and others are presented and discussed in detail. This work will be helpful for readers to understand the knowledge of 2D material modification, nanozymes, and the synthesis of hybrid materials; meanwhile, it could be valuable to promote the design, fabrication, and applications of 2D material-based sensors and biosensors in quick bioanalysis and disease diagnostics.

3-Hydroxy-2-naphthoic hydrazide as a probe for fluorescent detection of cyanide and aluminium ions in organic and aquo-organic media and its application in food and pharmaceutical samples

The commercially available fluorophore, 3-hydroxy-2-naphthoic hydrazide (RS2), has rationally been selected for the study, which displays a rapid fluorescent response and high sensitivity for CN^- and Al(III) ions in neat DMSO and H₂O-DMSO (1:1 v/v) media. The addition of CN^- to RS2 triggers an enhancement in fluorescence at 505 nm (green fluorescence), while the addition of Al(III) increases the fluorescence of the probe with a blue-shift of emission maximum by 25 nm (bluish-green fluorescence). The probe's action was investigated by ¹H NMR titrations that indicate deprotonation of OH and NH moieties by these ions. ²⁷Al NMR of RS2-Al(III) complex suggests an octahedral geometry for the complex. The sensitivity of the fluorescent-based assays in aq. DMSO medium, 0.8 µM for CN^- and 1.9 µM for Al(III) ions are far below the limits in the World Health Organization guidelines for drinking water. RS2 detects Al(III) by the chelation-enhanced fluorescence (CHEF) mechanism. Besides, RS2 was successfully applied to detect CN^- and Al(III) ions in food materials and pharmaceutical samples, respectively.

Pyridine-pyrazole based Al(iii) 'turn on' sensor for MCF7 cancer cell imaging and detection of picric acid

We report herein the development of a new pyridine-pyrazole based bis-bidentate asymmetric chemosensor that shows excellent turn-on chelation-enhanced Al3+-responsive fluorescence. The presence of two 'hard' phenolic hydroxyl groups plays a pivotal role in switching-on the sensing through coordination to the 'hard' Al3+ ion, while the mechanism can be interpreted by the chelation-enhanced fluorescence (CHEF) process. The X-ray single structure show a planar conjugated structure of the ligand, which was further stabilized by extensive H-bonding and π-π stacking. The photophysical studies related to the sensing behavior of the titular ligand toward aluminum was investigated in detail using various spectroscopic techniques like UV-Vis, photoluminescence, fluorescence and time-correlated single-photon count (TCSPC) and time-resolved NMR. The spectroscopic methods also confirm the selective detection of Al3+ ion in the presence of other metal ions. The theoretical calculations using Density Functional Theory (DFT) and the Time Dependent Density Functional Theory (TD-DFT) provide further insight on the mechanistic aspects of the turn-on sensing behavior including the electronic spectra of both the ligand and the complex. Interestingly, the as-synthesized H2DPC-Al complex can also be utilized as a fluorescence-based sensor for various nitroaromatics including picric acid, for which an INHIBIT logic gate can also be constructed. The as synthesized complex was subsequently used as a fluorescent probe for imaging of human breast adenocarcinoma (MCF7) cells using live cell confocal microscopic techniques.

Revisiting salicylidene-based anion receptors

Several salicylidene-based colorimetric and fluorimetric anion sensors are known in the literature. However, our ¹H-NMR experimental results (in DMSO-d₆) showed hydrolysis of imine (–N Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CH–) bonds in salicylidene-based receptors (SL, CL1 and CL2) in the presence of quaternary ammonium salts (n-Bu₄N⁺) of halides (Cl⁻ and Br⁻) and oxo-anions (H₂PO₄⁻, HSO₄⁻ and CH₃COO⁻). The mono-salicylidene compound CL1 showed the most extensive –NCH– bond hydrolysis in the presence of anions. In contrast, the di-salicylidene compound CL2 and the tris-salicylidene compound SL showed comparatively slow hydrolysis of –NCH– bonds in the presence of anions. Anion-induced imine bond cleavage in salicylidene compounds could easily be detected in ¹H-NMR due to the appearance of the salicylaldehyde –CHO peak at 10.3 ppm which eventually became more intense over time, and the –NCH– peak at 8.9–9.0 ppm became considerably weaker. Furthermore, the formation of the salicylidene O–H⋯X⁻ (X⁻ = Cl⁻/Br⁻) hydrogen-bonded complex, peak broadening due to proton-exchange processes and keto–enol tautomerism have also been clearly observed in the ¹H-NMR experiments. Control ¹H-NMR experiments revealed that the presence of moisture in the organic solvents could result in gradual hydrolysis of the salicylidene compounds, and the rate of hydrolysis has further been enhanced significantly in the presence of an anion. Based on ¹H-NMR results, we have proposed a general mechanism for the anion-induced hydrolysis of imine bonds in salicylidene-based receptors.

Salicylidene Schiff bases undergo imine bond hydrolysis in the presence of halides and oxo-anions in aprotic media, raising fundamental questions on the applicability of salicylidene-based receptors as anion sensors.

Selective monitoring ATP using a fluorogenic Al(III)-probe complex in aqueous medium

A simple commercially available probe 8-hydroxyjulolidine-9-aldehyde (HJ) has been developed as a turn-on fluorescent probe specifically for Al³⁺ and characterized systemically. The probe HJ for Al³⁺ ion exhibits strong green fluorescence under ultraviolet light. The HJ acted as an OFF-ON-OFF type fluorescent probe for Al³⁺ and ATP in nearly 100% aqueous media. The 1:1 binding stoichiometry between probe and Al³⁺ has been established from Job's plot and HRMS studies. The limit of detection for Al³⁺ ion is found to be 5.75 × 10^-8 M. The large association constant between HJ and Al³⁺ ion is 1.05 × 10⁵ M^-1. Detailed insights of probe-metal interaction mechanisms have been studied by the density functional theory (DFT) as well as the time dependent-DFT (TDDFT) calculations. Moreover, benefiting from the water solubility and biocompatibility of the probe HJ and its HJ-Al³⁺ complex, they have also been successfully applied to detect Al³⁺ and ATP by bioimaging in onion epidermal cells and adult zebrafish respectively.

Two highly sensitive and efficient salamo-like copper(II) complex probes for recognition of CN. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2020;228:117775. [PMID: 31718968 DOI: 10.1016/j.saa.2019.117775]

Two salamo-like copper(II) complex probes, L¹-Cu²⁺ and L²-Cu²⁺, were designed and synthesized for sensitive and efficient identification of CN^-. UV spectroscopy, high resolution mass spectrometry, RGB analysis and naked eye recognition were performed to explore their recognition mechanisms. High resolution mass spectra indicated that the probes L¹-Cu²⁺ and L²-Cu²⁺ formed complexes with CN^-. The two probes could recognize CN^- by the naked eye and the color of the solution changed from light yellow to red. In terms of application, the contents of CN^- in the environmental water samples were tested. In addition, the optimal pH ranges for probe detection of CN^- were investigated by pH value measurement.

Experimental and Theoretical Studies on a Simple S-S-Bridged Dimeric Schiff Base: Selective Chromo-Fluorogenic Chemosensor for Nanomolar Detection of Fe2+ & Al3+ Ions and Its Varied Applications

A simple S-S (disulfide)-bridged dimeric Schiff base probe, L, has been designed, synthesized, and successfully characterized for the specific recognition of Al3+ and Fe2+ ions as fluorometric and colorimetric "turn-on" responses in a dimethylformamide (DMF)-H2O solvent mixture, respectively. The probe L and each metal ion bind through a 1:1 complex stoichiometry, and the plausible sensing mechanism is proposed based on the inhibition of the photoinduced electron transfer process (PET). The reversible chemosensor L showed high sensitivity toward Al3+ and Fe2+ ions, which was analyzed by fluorescence and UV-vis spectroscopy techniques up to nanomolar detection limits, 38.26 × 10-9 and 17.54 × 10-9 M, respectively. These experimental details were advocated by density functional theory (DFT) calculations. The practical utility of the chemosensor L was further demonstrated in electrochemical sensing, in vitro antimicrobial activity, molecular logic gate function, and quantification of the trace amount of Al3+ and Fe2+ ions in real water samples.

A dual fluorescence probe for Zn2+ and Al3+ through differentially response and bioimaging in living cells

A novel Schiff base fluorescent probe 7-Hydroxy-8-(((2-(hydroxymethyl)quinolin-8-yl)imino)methyl)-coumarin (XL) consist of formylcoumarin and aminoquinoline moieties was synthesized for dual detection of Zn²⁺ and Al³⁺ ions. Probe XL exhibited high selective and sensitive response towards Zn²⁺ and Al³⁺ ions through different color changes and significant fluorescence turn-on response (270 fold higher for Zn²⁺ and 230 fold higher for Al³⁺) in MeOH-H₂O (4/1, v/v) over other cations, with detection limits (LOD) as low as 3.75 × 10^-8 and 1.14 × 10^-8 M, respectively. Moreover, probe XL exhibited preferential selectivity for Al³⁺ through displacing Zn²⁺ from the XL-Zn²⁺ complex by ligand-to-ligand transfer process. The binding mechanism of intramolecular charge transfer (ICT) were proposed from fluorescence and UV-vis titrations, Job's plot, ¹H NMR titration, HRMS and DFT calculations. The probe was proven to be suitable for actual samples detection of Zn²⁺ and Al³⁺ ions. The complex XL-Zn²⁺ and XL-Al³⁺ exhibited dramatic fluorescent "turn-off" properties for PPi and PPi/F^- respectively through snatching metal ions and released free XL. Moreover, probe XL showed low biotoxicity and sequentially "off-on-off" fluorescent bio-imaging of Zn²⁺/Al³⁺ and PPi/F^- in PC12 cells.