Solvent-induced assembly of mono- and divalent silica nanoparticles

Particles with attractive patches are appealing candidates to be used as building units to fabricate novel colloidal architectures by self-assembly. Here, we report the synthesis of one-patch silica nanoparticles, which consist of silica half-spheres whose concave face carries in its center a polymeric patch made of grafted polystyrene chains. The multistage synthesis allows for a fine control of the patch-to-particle size ratio from 0.23 to 0.57. The assembly of the patchy nanoparticles can be triggered by reducing the solvent quality for the polystyrene chains. Dimers or trimers can be obtained by tuning the patch-to-particle size ratio. When mixed with two-patch nanoparticles, one-patch nanoparticles control the length of the resulting chains by behaving as colloidal chain stoppers. The present strategy allows for future elaboration of novel colloidal structures by controlled assembly of nanoparticles.

Linear Assembly of Two-Patch Silica Nanoparticles and Control of Chain Length by Coassembly with Colloidal Chain Stoppers

The self-assembly of patchy nanosized building blocks is an efficient strategy for producing highly organized materials. Herein we report the chaining of divalent silica nanoparticles with polystyrene patches dispersed in tetrahydrofuran triggered by lowering the solvent quality. We study the influence of the patch-to-particle size ratio and show that the nature of the added nonsolvent, for example, ethanol, water, or salty water, and its volume fraction should be carefully adjusted. We demonstrate that colloidal assembly initially obeys the kinetic model of step-growth polymerization and that beyond a certain length, the chains have the possibility to cyclize. We also show that the length of the chains can be controlled by the addition of one-patch silica nanoparticles, which act as colloidal analogues of chain stoppers.

Solvent-Induced Assembly of One-Patch Silica Nanoparticles into Robust Clusters, Wormlike Chains and Bilayers

We report the synthesis and solvent-induced assembly of one-patch silica nanoparticles in the size range of 100–150 nm. They consisted, as a first approximation, of silica half-spheres of which the truncated face was itself concave and carried in its center a polymeric patch made of grafted polystyrene chains. The multistage synthesis led to 98% pure batches and allowed a fine control of the patch-to-particle size ratio from 0.69 to 1.54. The self-assembly was performed in equivolume mixtures of tetrahydrofuran and ethanol, making the polymeric patches sticky and ready to coalesce together. The assembly kinetics was monitored by collecting samples over time and analyzing statistically their TEM images. Small clusters, such as dimers, trimers, and tetramers, were formed initially and then evolved in part into micelles. Accordingly to previous simulation studies, more or less branched wormlike chains and planar bilayers were observed in the long term, when the patch-to-particle size ratio was high enough. We focused also on the experimental conditions that could allow preparing small clusters in a good morphology yield.

Templated Synthesis and Assembly of Two-, Three- and Six-Patch Silica Nanoparticles with a Controlled Patch-to-Particle Size Ratio

We report a fabrication route of silica nanoparticles with two, three or six patches with an easily tunable patch-to-particle size ratio. The synthetic pathway includes two main stages: the synthesis of silica/polystyrene multipod-like templates and the selective growth of their silica core through an iterative approach. Electron microscopy of the dimpled nanoparticles obtained after dissolution of the polystyrene nodules of the multipod-like nanoparticles provides evidence of the conformational growth of the silica core. Thanks to the presence of some polymer chains, which remained grafted at the bottom of the dimples after the dissolution of the PS nodules, the solvent-induced assembly of the patchy nanoparticles is performed. Chains, hexagonal suprastructures and cubic lattices are obtained from the assembly of two-, three- and six-patch silica nanoparticles, respectively. Our study can guide future work in both patchy nanoparticle synthesis and self-assembly. It also opens new routes towards the fabrication of specific classes of one-, two- and three-dimensional colloidal lattices, including complex tilings.

Versatile template-directed synthesis of gold nanocages with a predefined number of windows

Highly symmetrical gold nanocages can be produced with a controllable number of circular windows of either 2, 3, 4, 6 or 12 via an original fabrication route. The synthetic pathway includes three main stages: the synthesis of silica/polystyrene multipod templates, the regioselective seeded growth of a gold shell on the unmasked part of the silica surface and the development of gold nanocages by dissolving/etching the templates. Electron microscopy and tomography provide evidence of the symmetrical features of the as-obtained nanostructures. The optical properties of nanocages with 4 and 12 windows were measured at the single particle level by spatial modulation spectroscopy and correlated with numerical simulations based on finite-element modeling. The new multi-step synthesis approach reported here also allows the synthesis of rattle-like nanostructures through filling of the nanocages with a guest nano-object. With the potential to adjust the chemical composition, size and geometry of both the guest particle and the host cage, it opens new routes towards the fabrication of hollow nanostructures of high interest for a variety of applications including sensing devices, catalytic reactors and biomedicine.

Toward Huygens' Sources with Dodecahedral Plasmonic Clusters

The design and chemical synthesis of plasmonic nanoresonators exhibiting a strong magnetic response in the visible is a key requirement to the realization of efficient functional and self-assembled metamaterials. However, novel applications like Huygens' metasurfaces or mu-near-zero materials require stronger magnetic responses than those currently reported. Our numerical simulations demonstrate that the specific dodecahedral morphology, whereby 12 silver satellites are located on the faces of a nanosized dielectric dodecahedron, provides sufficiently large electric and magnetic dipolar and quadrupolar responses that interfere to produce so-called generalized Huygens' sources, fulfilling the generalized Kerker condition. Using a multistep colloidal engineering approach, we synthesize highly symmetric plasmonic nanoclusters with a controlled silver satellite size and show that they exhibit a strong forward scattering that may be used in various applications such as metasurfaces or perfect absorbers.

Polyhedral plasmonic nanoclusters through multi-step colloidal chemistry

We describe a new approach to making plasmonic metamolecules with well-controlled resonances at optical wavelengths. Metamolecules are highly symmetric, subwavelength-scale clusters of metal and dielectric. They are of interest for metafluids, isotropic optical materials with applications in imaging and optical communications. For such applications, the morphology must be precisely controlled: the optical response is sensitive to nanometer-scale variations in the thickness of metal coatings and the distances between metal surfaces. To achieve this precision, we use a multi-step colloidal synthesis approach. Starting from highly monodisperse silica seeds, we grow octahedral clusters of polystyrene spheres using seeded-growth emulsion polymerization. We then overgrow the silica and remove the polystyrene to create a dimpled template. Finally, we attach six silica satellites to the template and coat them with gold. Using single-cluster spectroscopy, we show that the plasmonic resonances are reproducible from cluster to cluster. By comparing the spectra to theory, we show that the multi-step synthesis approach can control the distances between metallic surfaces to nanometer-scale precision. More broadly, our approach shows how metamolecules can be produced in bulk by combining different, high-yield colloidal synthesis steps, analogous to how small molecules are produced by multi-step chemical reactions.

Towards Polymeric Nanoparticles with Multiple Magnetic Patches

Fabricating future materials by self-assembly of nano-building blocks programmed to generate specific lattices is among the most challenging goals of nanotechnology and has led to the recent concept of patchy particles. We report here a simple strategy to fabricate polystyrene nanoparticles with several silica patches based on the solvent-induced self-assembly of silica/polystyrene monopods. The latter are obtained with morphological yields as high as 99% by seed-growth emulsion polymerization of styrene in the presence of 100 nm silica seeds previously modified with an optimal surface density of methacryloxymethyl groups. In addition, we fabricate "magnetic" silica seeds by silica encapsulation of preformed maghemite supraparticles. The polystyrene pod, i.e., surface nodule, serves as a sticky point when the monopods are incubated in a bad/good solvent mixture for polystyrene, e.g., ethanol/tetrahydrofuran mixtures. After self-assembly, mixtures of particles with two, three, four silica or magnetic silica patches are mainly obtained. The influence of experimental parameters such as the ethanol/tetrahydrofuran volume ratio, monopod concentration and incubation time is studied. Further developments would consist of obtaining pure batches by centrifugal sorting and optimizing the relative position of the patches in conventional repulsion figures.

Dimpled SiO2@γ-Fe2O3 nanocomposites - fabrication and use for arsenic adsorption in aqueous medium

We report the synthesis of nanocomposites made of silica nanoparticles whose six surface dimples are decorated with magnetic maghemite nanoparticles and their use for detection and recovery of arsenic in aqueous media. Precursor silica nanoparticles have aminated polystyrene chains at the bottom of their dimples and the maghemite nanoparticles are surface functionalized with carboxylic acid groups in two steps: amination with 3-aminopropyltrimethoxysilane, then derivatization with succinic anhydride in the presence of triethylamine. In the end, the colloidal assembly consists of the regioselective grafting of the carboxylic acid-modified iron oxide nanoparticles onto the 6-dimple silica nanoparticles. Several characterization techniques such as transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), dynamic light scattering (DLS) are employed to assess the grafting process and study the influence of the maghemite functional groups on the quality of the composites formed. The resulting magnetic nanocomposites are used for the environmentally benign detection and removal of arsenic from aqueous medium, being readily extracted through means of magnetic separation.

The process of grafting maghemite NFs onto silica dimples.

Colloidal molecules and patchy particles: complementary concepts, synthesis and self-assembly

About the latest developments regarding self-assembly of textured colloids and its prospects.

Colloidal chemistry with patchy silica nanoparticles

We report a new route to synthesize clusters, or so-called colloidal molecules (CMs), which mimic the symmetry of molecular structures made of one central atom. We couple site-specifically functionalized patchy nanoparticles, i.e., valence-endowed colloidal atoms (CAs), with complementary nanospheres through amide bonds. By analogy with the Gillespie formalism, we show that AX4, AX3E1 and AX2E2 CMs can be obtained from tetravalent sp3-like CAs when the relative amount of both building units is varied in a controlled manner. We obtain AX2 CMs from divalent sp-like CAs. We also show that it is possible to covalently attach two different types of satellites to the same central patchy nanoparticle to create more complex CMs, opening the way to the fabrication of new multifunctional nanostructures with well-controlled shape and composition.

Nonisotropic Self-Assembly of Nanoparticles: From Compact Packing to Functional Aggregates

Quantum strongly correlated systems that exhibit interesting features in condensed matter physics often need an unachievable temperature or pressure range in classical materials. One solution is to introduce a scaling factor, namely, the lattice parameter. Synthetic heterostructures named superlattices or supracrystals are synthesized by the assembling of colloidal atoms. These include semiconductors, metals, and insulators for the exploitation of their unique properties. Most of them are currently limited to dense packing. However, some of desired properties need to adjust the colloidal atoms neighboring number. Here, the current state of research in nondense packing is summarized, discussing the benefits, outlining possible scenarios and methodologies, describing examples reported in the literature, briefly discussing the challenges, and offering preliminary conclusions. Penetrating such new and intriguing research fields demands a multidisciplinary approach accounting for the coupling of statistic physics, solid state and quantum physics, chemistry, computational science, and mathematics. Standard interactions between colloidal atoms and emerging fields, such as the use of Casimir forces, are reported. In particular, the focus is on the novelty of patchy colloidal atoms to meet this challenge.

Supraparticles: Functionality from Uniform Structural Motifs

Under the right process conditions, nanoparticles can cluster together to form defined, dispersed structures, which can be termed supraparticles. Controlling the size, shape, and morphology of such entities is a central step in various fields of science and technology, ranging from colloid chemistry and soft matter physics to powder technology and pharmaceutical and food sciences. These diverse scientific communities have been investigating formation processes and structure/property relations of such supraparticles under completely different boundary conditions. On the fundamental side, the field is driven by the desire to gain maximum control of the assembly structures using very defined and tailored colloidal building blocks, whereas more applied disciplines focus on optimizing the functional properties from rather ill-defined starting materials. With this review article, we aim to provide a connecting perspective by outlining fundamental principles that govern the formation and functionality of supraparticles. We discuss the formation of supraparticles as a result of colloidal properties interplaying with external process parameters. We then outline how the structure of the supraparticles gives rise to diverse functional properties. They can be a result of the structure itself (emergent properties), of the colocalization of different, functional building blocks, or of coupling between individual particles in close proximity. Taken together, we aim to establish structure-property and process-structure relationships that provide unifying guidelines for the rational design of functional supraparticles with optimized properties. Finally, we aspire to connect the different disciplines by providing a categorized overview of the existing, diverging nomenclature of seemingly similar supraparticle structures.

Mix-and-Melt Colloidal Engineering

Increasing significance is being placed on the synthesis of smart colloidal particles, since the route to various meta-materials has been outlined through their bottom-up self-assembly. Unfortunately, making particles with well-defined shape and surface chemistry often requires considerable effort and time, and as such, they are available only in restrictive yields. Here we report a synthetic methodology, which we refer to as mix-and-melt reactions (MMR), that allows for rapid prototyping and mass production of anisotropic core-shell colloids. MMR take advantage of the synergistic properties between common colloidal suspensions by aggregating then reconfiguring polystyrene shell particles onto core particle substrates. By systematically exchanging cores and shells, the resultant core-shell particle's properties are manipulated in a modular fashion. The influence of the constituent particles' size ratio is extensively explored, which is shown to tune shell thickness, change the aspect ratio of shells on anisotropic cores, and access specific shapes such as tetrahedra. Beyond particle shape, mixed shell systems are utilized to create regular surface patches. Surface Evolver simulations are used to demonstrate how randomly packed clusters melt into regular shapes via a shell compartmentalization mechanism.

Limiting the valence: advancements and new perspectives on patchy colloids, soft functionalized nanoparticles and biomolecules

Artistic representation of limited valance units consisting of a soft core (in blue) and a small number of flexible bonding patches (in orange).

Templated growth of gold satellites on dimpled silica cores

We synthesize robust clusters of gold satellites positioned with tetrahedral symmetry on the surface of a patchy silica core by adsorption and growth of gold on the patches. First we conduct emulsion polymerization of styrene in the presence of 52 nm silica seeds whose surface has been modified with methacryloxymethyltriethoxysilane (MMS). We derive four-dimple particles from the resulting silica/polystyrene tetrapods. Polystyrene chains are covalently bound to the silica surface within the dimples due to the MMS grafts and they may be thiolated to induce adsorption of 12 nm gold particles. Using chloroauric acid, ascorbic acid and sodium citrate at room temperature, we grow gold from these 12 nm seeds without detachment from or deformation of the dimpled silica surface. We obtain gold satellites of tunable diameter up to 140 nm.

Multipod-like silica/polystyrene clusters

Multipod-like clusters composed of a silica core and PS satellites are prepared according to a seeded-growth emulsion polymerization of styrene in the presence of size-monodisperse silica particles previously surface-modified with methacryloxymethyltriethoxysilane. Tuning the diameter and concentration of the silica seeds affords homogeneous batches of tetrapods, hexapods, octopods, nonapods and dodecapods with morphology yields as high as 80%. Three-dimensional reconstructions by cryo-electron tomography are presented on large fields for the first time to show the high symmetry and regularity of the clusters demonstrating the good control of the synthesis process. These synthesis experiments are visited again digitally, in order to successfully refine an original simulation model and better understand the correlation between the history of the cluster growth and the final composition of the cluster mixture. Finally, using the model as a predictive tool and varying the extra experimental conditions, e.g. the composition of the surfactant mixture and the styrene concentration, result in trapping other cluster morphologies, such as tripods.

Highlights of the Faraday Discussion on Nanoparticle Synthesis and Assembly, Argonne, USA, April 2015

Collapse