Research Progress on Photocatalytic CO2 Reduction Based on Perovskite Oxides

Photocatalytic CO2 reduction to valuable fuels is a promising way to alleviate anthropogenic CO2 emissions and energy crises. Perovskite oxides have attracted widespread attention as photocatalysts for CO2 reduction by virtue of their high catalytic activity, compositional flexibility, bandgap adjustability, and good stability. In this review, the basic theory of photocatalysis and the mechanism of CO2 reduction over perovskite oxide are first introduced. Then, perovskite oxides' structures, properties, and preparations are presented. In detail, the research progress on perovskite oxides for photocatalytic CO2 reduction is discussed from five aspects: as a photocatalyst in its own right, metal cation doping at A and B sites of perovskite oxides, anion doping at O sites of perovskite oxides and oxygen vacancies, loading cocatalyst on perovskite oxides, and constructing heterojunction with other semiconductors. Finally, the development prospects of perovskite oxides for photocatalytic CO2 reduction are put forward. This article should serve as a useful guide for creating perovskite oxide-based photocatalysts that are more effective and reasonable.

Photocatalysis and perovskite oxide-based materials: a remedy for a clean and sustainable future

The massive use of non-renewable energy resources by humankind to fulfill their energy demands is causing severe environmental issues. Photocatalysis is considered one of the potential solutions for a clean and sustainable future because of its cleanliness, inexhaustibility, efficiency, and cost-effectiveness. Significant efforts have been made to design highly proficient photocatalyst materials for various applications such as water pollutant degradation, water splitting, CO2 reduction, and nitrogen fixation. Perovskite photocatalyst materials are gained special attention due to their exceptional properties because of their flexibility in chemical composition, structure, bandgap, oxidation states, and valence states. The current review is focused on perovskite materials and their applications in photocatalysis. Special attention has been given to the structural, stoichiometric, and compositional flexibility of perovskite photocatalyst materials. The photocatalytic activity of perovskite materials in different photocatalysis applications is also discussed. Various mechanisms involved in photocatalysis application from wastewater treatment to hydrogen production are also provided. The key objective of this review is to encapsulate the role of perovskite materials in photocatalysis along with their fundamental properties to provide valuable insight for addressing future environmental challenges.

Selective Photocatalytic Reduction of CO2 to CH4 Modulated by Chloride Modification on Bi2WO6 Nanosheets

Solar-driven photocatalytic CO₂ reduction into CH₄ with H₂O is considered to be a promising way to alleviate the energy crisis and greenhouse effect. However, current CO₂ photoreduction technologies tend to overlook the role of photooxidation half reaction as well as the effect of the protons produced by water oxidation on CH₄ generation, resulting in low CO₂ conversion efficiency and poor CH₄ selectivity. In the present study, a series of chloride-modified Bi₂WO₆ nanosheets were constructed in view of chloride-assisted photocatalytic water oxidation. The results show that the CH₄ yield of the synthesized sample can be enhanced up to about 10 times compared to that with no Cl^- modification. Besides, the selectivity of CH₄ can be regulated by the loading amount of chloride, varying from 51.29% for Bi₂WO₆ to 94.98% for the maximum. The increase of product yield is attributed to chloride modification, which not only changed the morphology of the catalyst, but also modified the pathway of water oxidation. Further studies on intermediate products and the density functional theory calculation confirm that the Cl^- ions on Bi₂WO₆ nanosheets not only promote H₂O oxidation, but also lower the energy barrier for intermediate *CHO generation, thus facilitating CH₄ production. The results gained herein may provide some illuminating insights into the design of a highly selective photocatalyst for efficient CO₂ reduction.

Bismuth-Based Photocatalysts for Solar Photocatalytic Carbon Dioxide Conversion

Photocatalytic CO₂ conversion into solar fuels is an effective means for simultaneously solving both the greenhouse effect and energy crisis. In the past ten years, bismuth-based photocatalysts for environmental remediation have experienced a golden period of development. However, solar photocatalytic CO₂ conversion has only been developed over the past five years and, until now, no reviews have been published on bismuth-based photocatalysts for the photocatalytic conversion of CO₂ . For the first time, solar photocatalytic CO₂ conversion systems are reviewed herein. Synthetic methods and photocatalytic CO₂ performances of bismuth-based photocatalysts, including Sillén-structured BiOX (X=Cl, Br, I); Aurivillius-structured Bi₂ MO₆ (M=Mo, W); and Scheelite-structured BiVO₄ , Bi₂ S₃ , BiYO₃ , and BiOIO₃ , are summarized. In addition, activity-enhancing strategies for this photocatalyst family, including oxygen vacancies, bismuth-rich strategy, facet control, conventional type II heterojunction, Z-scheme heterojunction, and cocatalyst deposition, are reviewed. Finally, the main mechanistic research methods, such as in situ FTIR spectroscopy and theoretical calculations, are presented. Challenges and research trends reported in studies of bismuth-based photocatalysts for photocatalytic CO₂ conversion are discussed and summarized.

Hierarchical Nanostructured Photocatalysts for CO2 Photoreduction

Practical implementation of CO2 photoreduction technologies requires low-cost, highly efficient, and robust photocatalysts. High surface area photocatalysts are notable in that they offer abundant active sites and enhanced light harvesting. Here we summarize the progress in CO2 photoreduction with respect to synthesis and application of hierarchical nanostructured photocatalysts.

Photocatalytic Hydrogen Evolution Using Bi-Metallic (Ni/Pt) Na2Ti3O7 Whiskers: Effect of the Deposition Order

Photocatalytic hydrogen production through ethanol photo-reforming using Na2Ti3O7 whiskers increases if the sodium titanate is decorated with well-known metallic catalysts such as Ni and Pt. Whereas wet impregnation with nickel gives only a slight increase in the activity, photo-deposition of Pt increased the H2 production by more than one order of magnitude. Through the combination of both co-catalysts (Ni and Pt) a superior performance in terms of H2 production is further observed. However, hydrogen yield is largely enhanced (almost three-fold), up to 778 μmol·g−1·h−1, if the Pt is photo-deposited on the surface of the catalyst before wet impregnation with Ni species (NTO/Pt/Ni) compared to H2 yield (283 μmol·g−1·h−1) achieved with the catalyst prepared in the reverse order (NTO/Ni/Pt). Structural, morphological, optical, and chemical characterization was carried out in order to correlate physicochemical properties with their photocatalytic activity. The X-ray photoelectron spectroscopy (XPS) results show a higher concentration of Pt2+ species if this metallic layer is under the nickel oxide layer. Moreover, X-ray diffraction patterns (XRD) show that Na2Ti3O7 surface is modified for both metal decoration processes.

Synthesis of Bi2O3/g-C3N4 for enhanced photocatalytic CO2 reduction with a Z-scheme mechanism

Bi₂O₃/g-C₃N₄ nanoscale composites with a Z-scheme mechanism were successfully synthesized by high temperature calcination combined with a hydrothermal method. These synthesized composites exhibited excellent photocatalytic performance, especially the 40 wt% Bi₂O₃/g-C₃N₄ composite, which produced about 1.8 times the CO yield of pure g-C₃N₄. The obtained products were characterized by X-ray diffraction (XRD) patterns, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET), UV-vis diffuse reflectance spectroscopy (UV-vis DRS) and so on. Characterization results revealed that Bi ions had well covered the surface of g-C₃N₄, thus restraining the recombination of electron–hole pairs and resulting in a stronger visible-light response and higher CO yield. In addition, the electron transfer process through the Z-scheme mechanism also promoted the photocatalytic activity.

Bi₂O₃/g-C₃N₄ composites were synthesized and used in photocatalytic reduction of CO₂ with a Z-scheme mechanism.

Review on nanoscale Bi-based photocatalysts

Nanoscale Bi-based photocatalysts are promising candidates for visible-light-driven photocatalytic environmental remediation and energy conversion. However, the performance of bulk bismuthal semiconductors is unsatisfactory. Increasing efforts have been focused on enhancing the performance of this photocatalyst family. Many studies have reported on component adjustment, morphology control, heterojunction construction, and surface modification. Herein, recent topics in these fields, including doping, changing stoichiometry, solid solutions, ultrathin nanosheets, hierarchical and hollow architectures, conventional heterojunctions, direct Z-scheme junctions, and surface modification of conductive materials and semiconductors, are reviewed. The progress in the enhancement mechanism involving light absorption, band structure tailoring, and separation and utilization of excited carriers, is also introduced. The challenges and tendencies in the studies of nanoscale Bi-based photocatalysts are discussed and summarized.

Photocatalytic methane conversion coupled with hydrogen evolution from water over Pd/TiO2

A new photocatalytic reaction system involving H₂ evolution from aqueous water and CH₄ conversion is established over Pd/TiO₂.

Photocatalytic reduction of CO2based on a CeO2photocatalyst loaded with imidazole fabricated N-doped graphene and Cu(ii) as cocatalysts

Cocatalysts are vital for improving photocatalytic activity.

Tuning of the crystal engineering and photoelectrochemical properties of crystalline tungsten oxide for optoelectronic device applications

WO₃crystals with {002} or {111} facets primarily exposed, WO₃films with dominant orientations, doping and heterostructuring are highlighted.

Photocatalytic reduction of CO2 using molybdenum-doped titanate nanotubes in a MEA solution

In this study, the photocatalytic reduction of CO₂ in a monoethanolamine solution to form valuable energy sources was investigated using Mo-doped TNTs photocatalysts for the first time.