Novel BODIPY-Based Photobase Generators for Photoinduced Polymerization

Photobase generators (PBGs) are compounds that utilize light-sensitive chemical-protecting groups to offer spatiotemporal control of releasing organic bases upon targeted light irradiation. PBGs can be implemented as an external control to initiate anionic polymerizations such as thiol-ene Michael addition reactions. However, there are limitations for common PBGs, including a short absorption wavelength and weak base release that lead to poor efficiency in photopolymerization. Therefore, there is a great need for visible-light-triggered PBGs that are capable of releasing strong bases efficiently. Here, we report two novel BODIPY-based visible-light-sensitive PBGs for light-induced activation of the thiol-ene Michael "click" reaction and polymerization. These PBGs were designed by connecting the BODIPY-based light-sensitive protecting group with tetramethylguanidine (TMG), a strong base. Moreover, we exploited the heavy atom effect to increase the efficiency of releasing TMG and the polymerization rate. These BODIPY-based PBGs exhibit extraordinary activity toward thiol-ene Michael addition-based polymerization, and they can be used in surface coating and polymer network formation of different thiol and vinyl monomers.

Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications

A novel strategy allowing temporal control of dynamic bond exchange in covalently crosslinked polymer networks via latent transesterification catalysts is introduced. Obtained by a straightforward air- and water-tolerant synthesis, the latent catalyst is designed for an irreversible temperature-mediated release of a strong organic base. Its long-term inactivity at temperatures below 50 °C provides the unique opportunity to equip dynamic covalent networks with creep resistance and high bond-exchange rates, once activated. The presented thermally latent base catalyst is conveniently introducible in readily available building blocks and, as proof of concept, applied in a radically polymerized thiol-ene network. Light-mediated curing is used for 3D-printing functional objects, on which the possibility of spatially controlled reshaping and welding based on dynamic transesterification is illustrated. Since the catalyst is thermally activated, limitations regarding sample geometry and optical transparency do not apply, which facilitates a transfer to well-established industrial technologies. Consequently, fiber-reinforced and highly filled magneto-active thiol-ene polymer composites are fabricated by a thermal curing approach. The on-demand activation of dynamic transesterification is demonstrated by (magneto-assisted) reshaping experiments, highlighting a wide range of potential future applications offered by the presented concept.

Photochemical Processes of Superbase Generation in Xanthone Carboxylic Salts

Photobase generators are species that allow the photocatalysis of various reactions, such as thiol-Michael, thiol-isocyanate, and ring-opening polymerization reactions. However, existing compounds have complex syntheses and low quantum yields. To overcome these problems, photobase generators based on the photodecarboxylation reaction were developed. We synthesized and studied the photochemistry and photophysics of two xanthone photobase, their carboxylic acid precursors, and their photoproducts to understand the photobase generation mechanism. We determined accurate quantum yields of triplet states and photobase generation. The effect of the intermediate radical preceding the base release was demonstrated. We characterized the photophysics of the photobase by femtosecond spectroscopy and showed that the photodecarboxylation process occurred from the second excited triplet state with a rate constant of 2.2×10⁹  s^-1 .

Spotting Trends in Organocatalyzed and Other Organomediated (De)polymerizations and Polymer Functionalizations

Organocatalysis has evolved into an effective complement to metal- or enzyme-based catalysis in polymerization, polymer functionalization, and depolymerization. The ease of removal and greater sustainability of organocatalysts relative to transition-metal-based ones has spurred development in specialty applications, e.g., medical devices, drug delivery, optoelectronics. Despite this, the use of organocatalysis and other organomediated reactions in polymer chemistry is still rapidly developing, and we envisage their rapidly growing application in nascent areas such as controlled radical polymerization, additive manufacturing, and chemical recycling in the coming years. In this Review, we describe ten trending areas where we anticipate paradigm shifts resulting from novel organocatalysts and other transition-metal-free conditions. We highlight opportunities and challenges and detail how new discoveries could lead to previously inaccessible functional materials and a potentially circular plastics economy.

Photoenergy Harvesting by Photoacid Solution

Solar energy has seen 180 years of development since the discovery of the photovoltaic effect, having achieved the most successful commercialization in the energy-harvesting fields. Despite its long history, even the most state-of-the-art photovoltaics remain confined to solid-state devices, limiting spatial and light utilization efficiencies. Herein, a liquid-state photoenergy harvester based on a photoacid (PA), a chemical that releases protons upon light irradiation and recombines with them in the dark through a fully reversible reaction, is demonstrated. Asymmetric light exposure on a PA solution contained in a transparent tube generates a pH gradient (ΔpH = 2) along the exposed and dark regions, which charges the Nernst potential up to 0.7 V across the two electrodes embedded at each end, as if a capacitor. Owing to the reversibility of PAs, a PA-driven liquid-state photoenergy harvester (PLPH) generates capacitive currents up to 0.72 mA m^-2  on an irradiation. Notably, the transparent nature of the PLPH enables vertical stacking up to 25 units, which multiplies the light-harvesting efficiencies by over 1000%. This unique approach provides a new route to harness solar energy with a form-factor-free design that maximizes spatial and light-use efficiencies.

Photobase-catalysed anionic thiol-epoxy click photopolymerization under NIR irradiation: from deep curing to shape memory

A photobase generator absorbing upconversion fluorescence can efficiently catalyze anionic thiol-epoxy click photopolymerization under 980 nm NIR light irradiation.

Photoclick Chemistry: A Bright Idea

At its basic conceptualization, photoclick chemistry embodies a collection of click reactions that are performed via the application of light. The emergence of this concept has had diverse impact over a broad range of chemical and biological research due to the spatiotemporal control, high selectivity, and excellent product yields afforded by the combination of light and click chemistry. While the reactions designated as "photoclick" have many important features in common, each has its own particular combination of advantages and shortcomings. A more extensive realization of the potential of this chemistry requires a broader understanding of the physical and chemical characteristics of the specific reactions. This review discusses the features of the most frequently employed photoclick reactions reported in the literature: photomediated azide-alkyne cycloadditions, other 1,3-dipolarcycloadditions, Diels-Alder and inverse electron demand Diels-Alder additions, radical alternating addition chain transfer additions, and nucleophilic additions. Applications of these reactions in a variety of chemical syntheses, materials chemistry, and biological contexts are surveyed, with particular attention paid to the respective strengths and limitations of each reaction and how that reaction benefits from its combination with light. Finally, challenges to broader employment of these reactions are discussed, along with strategies and opportunities to mitigate such obstacles.

Introduction of Photolatent Bases for Locally Controlling Dynamic Exchange Reactions in Thermo-Activated Vitrimers

Vitrimers exhibit a covalently crosslinked network structure, as is characteristic of classic thermosetting polymers. However, they are capable of rearranging their network topology by thermo-activated associative exchange reactions when the topology freezing transition temperature (T_v ) is exceeded. Despite the vast number of developed vitrimers, there is a serious lack of methods that enable a (spatially) controlled onset of these rearrangement reactions above T_v . Herein, we highlight the localized release of the efficient transesterification catalyst 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) by the UV-induced cleavage of a photolatent base within a covalently crosslinked thiol-epoxy network. Demonstrated with stress relaxation measurements conducted well above the network's T_v , only the controlled release of TBD facilitates the immediate onset of transesterification in terms of a viscoelastic flow. Moreover, the spatially resolved UV-mediated photoactivation of vitrimeric properties is confirmed by permanent shape changes induced locally in the material.

Delayed Thiol-Epoxy Photopolymerization: A General and Effective Strategy to Prepare Thick Composites

Photoinduced thiol-epoxy click polymerization possesses both the characteristics and advantages of photopolymerization and click reactions. However, the photopolymerization of pigmented or highly filled thiol-epoxy thick composites still remains a great challenge due to the light screening effect derived from the competitive absorption, reflection, and scattering of the pigments or functional fillers. In this article, we present a simple and versatile strategy to prepare thick composites via delayed thiol-epoxy photopolymerization. The irradiation of a small area with a light-emitting diode (LED) point light source at room temperature leads to the decomposition of a photobase generator and the released active basic species can uniformly disperse throughout the whole system, including unirradiated areas, via mechanical stirring. No polymerization was observed at room temperature and therefore the liquid formulations can be further processed with molds of arbitrary size and desired shapes. It is only by increasing the temperature that base-catalyzed thiol-epoxy polymerization occurs and controllable preparation of thick thiol-epoxy materials can be achieved. The formed networks display excellent uniformity in different radii and depths with comparable functionality conversions, similar T _g values, and thermal decomposition temperatures. The presented strategy can be applied to prepare thick composites with glass fibers possessing improved mechanical properties and dark composites containing 2 wt % carbon nanotubes.

Photoinduced Proton-Transfer Polymerization: A Practical Synthetic Tool for Soft Lithography Applications

Proton-transfer photopolymerization through the thiol-epoxy "click" reaction is shown to be a versatile new method for the fabrication of micro- and nanosized polymeric patterns. In this approach, complexation of a guanidine base, diazabicycloundecene (DBU), with benzoylphenylpropionic acid (ketoprofen) generates a photolabile salt. Under illumination at a wavelength of 365 nm, the salt undergoes a photodecarboxylation reaction to release DBU as a base. The base-catalyzed ring opening reaction then creates cross-linked poly(β-hydroxyl thio-ether) patterns. The surface chemistry of these patterns can be altered through alkylation of the thio-ether linkages. For example, a reaction with bromoacetic acid produces a hitherto unknown sulfonium/carboxylate-based zwitterionic motif that endows antibiofouling capacity to the micropatterns.

Stimuli-responsive thiol-epoxy networks with photo-switchable bulk and surface properties

In the present work, the versatile nature of o-nitrobenzyl chemistry is used to alter bulk and surface properties of thiol-epoxy networks. By introducing an irreversibly photocleavable chromophore into the click network, material properties such as wettability, solubility and crosslink density are switched locally by light of a defined wavelength. The synthesis of photo-responsive thiol-epoxy networks follows a photobase-catalyzed nucleophilic ring opening of epoxy monomers with photolabile o-nitrobenzyl ester (o-NBE) groups across multi-functional thiols. To ensure temporal control of the curing reaction, a photolatent base is employed releasing a strong amidine-type base upon light exposure, which acts as an efficient catalyst for the thiol epoxy addition reaction. The spectral sensitivity of the photolatent base is extended to the visible light region by adding a selected photosensitizer to the resin formulation. Thus, in the case of photoactivation of the crosslinking reaction the photorelease of the base does not interfere with the absorbance of the o-NBE groups. Once the network has been formed, the susceptibility of the o-NBE groups towards photocleavage reactions is used for a well-defined network degradation upon UV exposure. Sol-gel analysis evidences the formation of soluble species, which is exploited to inscribe positive tone micropatterns by photolithography. Along with the localized tuning of network structure, the irreversible photoreaction is exploited to change the surface wettability of thiol-epoxy networks. The contact angle of water significantly decreases upon UV exposure due to the photo-induced formation of hydrophilic cleavage products enabling the inscription of domains with different surface wettability by photolithography.

o-Nitrobenzyl-Based Photobase Generators: Efficient Photoinitiators for Visible-Light Induced Thiol-Michael Addition Photopolymerization

In this contribution, three o-nitrobenzyl-based photobase systems were synthesized and evaluated for visible light initiated thiol-Michael addition polymerizations. With a modified structure, the (3,4-methylenedioxy-6-nitrophenyl)-propyloxycarbonyl (MNPPOC) protected base performance exceeds that of the nonsubstituted 2-(2-nitrophenyl)-propyloxycarbonyl (NPPOC) protected base and an ITX sensitized photobase system, with respect to both long-wavelength light sensitivity and photolytic efficiency. In material synthesis, MNPPOC-TMG is capable of initiating photo thiol-Michael polymerization efficiently and orthogonally with only limited visible light exposure and generating a highly homogeneous cross-linked polymer network. This approach enables the thiol-Michael "click" reaction to be conducted with a low-energy, visible light irradiation and, thus, expands its applications in biocompatible and UV sensitive materials.

UV-Initiated Ring Opening Polymerization of l-Lactide Using a Photobase Generator

Photoinitiated ring-opening polymerization of l-lactide (L-LA) using a photobase generator (PBG) able to release 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) is reported. Polymerization using the PBG with ketoprofenate counteranion (TBDH⁺.keto^-) was studied in dichloromethane either in the presence or in the absence of 1-butanol as initiator. In both cases, full monomer conversion was reached at room temperature after 10 min of irradiation at 254 nm. In the presence of 1-butanol, linear poly(L-LA) chains (PLA) were obtained, as confirmed by ¹H NMR and MALDI-TOF analyses. The polymerization was well controlled as attested by the production of polymers with low dispersity (Đ < 1.26) and by the linear evolution of molecular weights with the quantity of initiator. Without 1-butanol, although MALDI-TOF analyses revealed cyclic PLA chains (actually formed in situ during MALDI-TOF analysis), linear PLA chains were formed as proven by ¹H NMR, viscosity measurement, and phosphitylation titration. This fast and "on demand" polymerization opens the way to biodegradable UV coatings.

Photochemical Activation of Tertiary Amines for Applications in Studying Cell Physiology

Representative tertiary amines were linked to the 8-cyano-7-hydroxyquinolinyl (CyHQ) photoremovable protecting group (PPG) to create photoactivatable forms suitable for use in studying cell physiology. The photoactivation of tamoxifen and 4-hydroxytamoxifen, which can be used to activate Cre recombinase and CRISPR-Cas9 gene editing, demonstrated that highly efficient release of bioactive molecules could be achieved through one- and two-photon excitation (1PE and 2PE). CyHQ-protected anilines underwent a photoaza-Claisen rearrangement instead of releasing amines. Time-resolved spectroscopic studies revealed that photorelease of the tertiary amines was extremely fast, occurring from a singlet excited state of CyHQ on the 70 ps time scale.

Carbanion as a Superbase for Catalyzing Thiol⁻Epoxy Photopolymerization

Photobase generator (PBG)-mediated thiol⁻epoxy photopolymerization has received widedspread attention due to its versatility in various applications. Currently, nearly all reported PBGs release amines as active species. The formed amines induce odor, yellowing, and potential toxicity. In this study, a series of novel thioxanthone-based PBGs, which were able to generate carbanion via decarboxylation under LED light irradiation, were designed and straightforwardly prepared. The formed carbanion can be used as a superbase to catalyze thiol⁻epoxy polymerization efficiently. Investigation on ¹H NMR and FT-IR confirmed the generation of carbanion intermediates. The counteranion significantly affected the photodecarboxylation efficiency. The study of photopolymerization tests, based on real-time FT-IR and dielectric analysis measurements, indicated that the generated carbanion exhibited faster polymerization rate and higher epoxy conversion than traditional superbase 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU). In differential scanning calorimeter, thermogravimetric, and nanoindentation tests, comparable thermal and mechanical properties of the photocured films catalyzed by novel PBGs were obtained. The high initiation ability combined with straightforward synthesis makes these PBGs promising candidates for commercialization.

Wavelength-Selective Sequential Polymer Network Formation Controlled with a Two-Color Responsive Initiation System

We report a wavelength-selective polymerization process controlled by visible/UV light, whereby a base is generated for anion-mediated thiol-Michael polymerization reaction upon exposure at one wavelength (400-500 nm), while radicals are subsequently generated for a second stage radical polymerization at a second, independent wavelength (365 nm). Dual wavelength, light controlled sequential polymerization not only provides a relatively soft intermediate polymer that facilitates optimum processing and modification under visible light exposure but also enables a highly cross-linked, rigid final material after the UV-induced second stage radical polymerization. A photobase generator, NPPOC-TMG, and a photo-radical initiator, Irgacure 2959, were selected as the appropriate initiator pair for sequential thiol-Michael polymerization and acrylate homopolymerization. FT-IR and rheological tests were utilized to monitor the dual cure photo-polymerization process, and mechanical performance of the polymer was characterized at each distinct stage by dynamic mechanical analysis (DMA). By demonstrating complete light control in another sequential polymerization system (thiol-Michael and thiol-ene hybrid polymerization), this initiator pair exhibits great potential to regulate many other coupled anion and radical hybrid polymerizations in both a sequential and controllable manner.

Analysis of the reaction mechanism of the thiol–epoxy addition initiated by nucleophilic tertiary amines

The mechanism of thiol–epoxy reactions has been analyzed from a theoretical point of view and modelled using experimental kinetic data.

Efficient unimolecular photoinitiators for simultaneous hybrid thiol–yne–epoxy photopolymerization under visible LED light irradiation

Several unimolecular photoinitiators, which generate free radicals and super bases in one step under visible LED light irradiation, can efficiently induce simultaneous hybrid thiol–yne–epoxy photopolymerization.

Two-photon controlled sol–gel condensation for the microfabrication of silica based microstructures. The role of photoacids and photobases

Two-photon excitation of photobases is used to induce pH changes and control the condensation step of the sol–gel process at the focal point of a laser beam in a confocal configuration.

Mechanistic Kinetic Modeling of Thiol-Michael Addition Photopolymerizations via Photocaged "Superbase" Generators: An Analytical Approach

A kinetic mechanism and the accompanying mathematical framework are presented for base-mediated thiol-Michael photopolymerization kinetics involving a photobase generator. Here, model kinetic predictions demonstrate excellent agreement with a representative experimental system composed of 2-(2-nitrophenyl)propyloxycarbonyl-1,1,3,3-tetramethylguanidine (NPPOC-TMG) as a photobase generator that is used to initiate thiol-vinyl sulfone Michael addition reactions and polymerizations. Modeling equations derived from a basic mechanistic scheme indicate overall polymerization rates that follow a pseudo-first-order kinetic process in the base and coreactant concentrations, controlled by the ratio of the propagation to chain-transfer kinetic parameters (kp/kCT) which is dictated by the rate-limiting step and controls the time necessary to reach gelation. Gelation occurs earlier as the kp/kCT ratio reaches a critical value, wherefrom gel times become nearly independent of kp/kCT. The theoretical approach allowed determining the effect of induction time on the reaction kinetics due to initial acid-base neutralization for the photogenerated base caused by the presence of protic contaminants. Such inhibition kinetics may be challenging for reaction systems that require high curing rates but are relevant for chemical systems that need to remain kinetically dormant until activated although at the ultimate cost of lower polymerization rates. The pure step-growth character of this living polymerization and the exhibited kinetics provide unique potential for extended dark-cure reactions and uniform material properties. The general kinetic model is applicable to photobase initiators where photolysis follows a unimolecular cleavage process releasing a strong base catalyst without cogeneration of intermediate radical species.

Visible-Light-Initiated Thiol-Michael Addition Polymerizations with Coumarin-Based Photobase Generators: Another Photoclick Reaction Strategy

An efficient visible-light-sensitive photobase generator for thiol-Michael addition reactions was synthesized and evaluated. This highly reactive catalyst was designed by protecting a strong base (tetramethyl guanidine, TMG) with a visible-light-responsive group which was a coumarin derivative. The coumarin-coupled TMG was shown to exhibit extraordinary catalytic activity toward initiation of the thiol-Michael reaction, including thiol-Michael addition-based polymerization, upon visible-light irradiation, leading to a stoichiometric reaction of both thiol and vinyl functional groups. Owing to its features, this visible-light photobase generator enables homogeneous network formation in thiol-Michael polymerizations and also has the potential to be exploited in other visible-light-induced, base-catalyzed thiol-click processes such as thiol-isocynate and thiol-epoxy network-forming reactions.

Towards mussel-like on-demand coatings: light-triggered polymerization of dopamine through a photoinduced pH jump

Polydopamine polymerization was achieved through a photoinduced pH jump involving the irradiation of a photobase generator.

Thiol-Michael addition miniemulsion polymerizations: functional nanoparticles and reactive latex films

Thiol-Michael addition polymerization is successfully implemented in a miniemulsion polymerization system.

Thioxanthone acetic acid ammonium salts: highly efficient photobase generators based on photodecarboxylation

Novel photobase generators, which contain thioxanthone as the chromophore and different quaternary ammonium salts as latent active species, can efficiently catalyze the thiol–epoxy polymerization via photoinduced decarboxylation.