Synthesis of near-infrared absorbing and fluorescing thiophene-fused BODIPY dyes with strong electron-donating groups and their application in dye-sensitised solar cells

Thiophene-fused BODIPY dyes with two diethylaminophenyl groups as strong donors demonstrated near-infrared (NIR) absorption (λ_max: 783–812 nm, ε: 119 500–145 900) and fluorescence (F_max: 862–916 nm, Φ_f: 0.02–0.12) in dichloromethane.

Development of type-I/type-II hybrid dye sensitizer with both pyridyl group and catechol unit as anchoring group for type-I/type-II dye-sensitized solar cell

A type-I/type-II hybrid dye sensitizer with a pyridyl group and a catechol unit as the anchoring group has been developed and its photovoltaic performance in dye-sensitized solar cells (DSSCs) is investigated. The sensitizer has the ability to adsorb on a TiO₂ electrode through both the coordination bond at Lewis acid sites and the bidentate binuclear bridging linkage at Brønsted acid sites on the TiO₂ surface, which makes it possible to inject an electron into the conduction band of the TiO₂ electrode by the intramolecular charge-transfer (ICT) excitation (type-I pathway) and by the photoexcitation of the dye-to-TiO₂ charge transfer (DTCT) band (type-II pathway). It was found that the type-I/type-II hybrid dye sensitizer adsorbed on TiO₂ film exhibits a broad photoabsorption band originating from ICT and DTCT characteristics. Here we reveal the photophysical and electrochemical properties of the type-I/type-II hybrid dye sensitizer bearing a pyridyl group and a catechol unit, along with its adsorption modes onto TiO₂ film, and its photovoltaic performance in type-I/type-II DSSC, based on optical (photoabsorption and fluorescence spectroscopy) and electrochemical measurements (cyclic voltammetry), density functional theory (DFT) calculation, FT-IR spectroscopy of the dyes adsorbed on TiO₂ film, photocurrent-voltage (I-V) curves, incident photon-to-current conversion efficiency (IPCE) spectra, and electrochemical impedance spectroscopy (EIS) for DSSC.

All-inorganic inverse perovskite solar cells using zinc oxide nanocolloids on spin coated perovskite layer

We confirmed the influence of ZnO nanoparticle size and residual water on performance of all inorganic perovskite solar cells. By decreasing the size of the ZnO nanoparticles, the short-circuit current density (Jsc) and open circuit photovoltage (Voc) values are increased and the conversion efficiency is improved. Although the Voc value is not affected by the influence of residual water in the solution for preparing the ZnO layer, the Jsc value drops greatly. As a result, it was found that it is important to use the oxide nanoparticles with a small particle diameter and to reduce the water content in the oxide forming material in order to manufacture a highly efficient all inorganic perovskite solar cells.

Synthesis, optical and electrochemical properties, and photovoltaic performance of a panchromatic and near-infrared (D)2–π–A type BODIPY dye with pyridyl group or cyanoacrylic acid

(D)₂–π–A type BODIPY dyes bearing a pyridyl group or cyanoacrylic acid group and two diphenylamine–thienylcarbazole moieties which possess near-infrared adsorption ability as well as panchromatic adsorption ability, have been developed.

Synthesis and optical and electrochemical properties of julolidine-structured pyrido[3,4-b]indole dye

The julolidine-structured pyrido[3,4-b]indole dye ET-1 possesses the ability to act as a calorimetric and fluorescent sensor for Brønsted and Lewis acids.

Impact of the molecular structure and adsorption mode of D-π-A dye sensitizers with a pyridyl group in dye-sensitized solar cells on the adsorption equilibrium constant for dye-adsorption on TiO2 surface

D-π-A dyes NI-4 bearing a pyridyl group, YNI-1 bearing two pyridyl groups and YNI-2 bearing two thienylpyridyl groups as the anchoring group on the TiO₂ surface have been developed as dye sensitizers for dye-sensitized solar cells (DSSCs), where NI-4 and YNI-2 can adsorb onto the TiO₂ electrode through the formation of the coordinate bond between the pyridyl group of the dye and the Lewis acid site (exposed Tiⁿ⁺ cations) on the TiO₂ surface, but YNI-1 is predominantly adsorbed on the TiO₂ electrode through the formation of the hydrogen bond between the pyridyl group of the dye and the Brønsted acid sites (surface-bound hydroxyl groups, Ti-OH) on the TiO₂ surface. The difference in the dye-adsorption mode among the three dyes on the TiO₂ surface has been investigated from the adsorption equilibrium constant (K_ad) based on the Langmuir adsorption isotherms. It was found that the K_ad values of YNI-1 and YNI-2 are higher than that of NI-4, and more interestingly, the K_ad value of YNI-2 is higher than that of YNI-1. This work demonstrates that that for the D-π-A dye sensitizers with the pyridyl group as the anchoring group to the TiO₂ surface the number of pyridyl groups and the dye-adsorption mode on the TiO₂ electrode as well as the molecular structure of the dye sensitizer affect the K_ad value for the adsorption of the dye to the TiO₂ electrode, that is, resulting in a difference in the K_ad value among the D-π-A dye sensitizers NI-4, YNI-1 and YNI-2.

Butadiene dyes based on 3-(dicyanomethylidene)indan-1-one and 1,3-bis(dicyanomethylidene)indane: synthesis, characterization and solvatochromic behaviour

Novel 1,1-diaryl-substituted butadiene dyes containing 3-(dicyanomethylidene)indan-1-one and 1,3-bis(dicyanomethylidene)indane have been synthetized, and their light absorption and solvatochromic properties evaluated.

Insight into the effects of modifying π-bridges on the performance of dye-sensitized solar cells containing triphenylamine dyes

The photovoltaic performances of four novel dyes (ZHG1, ZHG2, ZHG3 and ZHG4) indicate that it is very important to find a balance point between the electron injection ability, intermolecular π–π aggregation and the expansion of the light absorption range.

New D–D–π–A type organic dyes having carbazol-N-yl phenothiazine moiety as a donor (D–D) unit for efficient dye-sensitized solar cells: experimental and theoretical studies

DSSCs using novel organic dyes (CPhTnPA, n = 0–2) with carbazol-N-yl phenothiazine moiety as a donor (D–D) unit as the sensitizers exhibited efficiency as high as 7.78% which reached 95% with respect to that of the reference N719-based device (8.20%).

Rational Molecular Engineering of Indoline-Based D-A-π-A Organic Sensitizers for Long-Wavelength-Responsive Dye-Sensitized Solar Cells

Indoline-based D-A-π-A organic sensitizers are promising candidates for highly efficient and long-term stable dye-sensitized solar cells (DSSCs). In order to further broaden the spectral response of the known indoline dye WS-2, we rationally engineer the molecular structure through enhancing the electron donor and extending the π-bridge, resulting in two novel indoline-based D-A-π-A organic sensitizers WS-92 and WS-95. By replacing the 4-methylphenyl group on the indoline donor of WS-2 with a more electron-rich carbazole unit, the intramolecular charge transfer (ICT) absorption band of dye WS-92 is slightly red-shifted from 550 nm (WS-2) to 554 nm (WS-92). In comparison, the incorporation of a larger π-bridge of cyclopentadithiophene (CPDT) unit in dye WS-95 not only greatly bathochromatically tunes the absorption band to 574 nm but also largely enhances the molar extinction coefficients (ε), thus dramatically improving the light-harvesting capability. Under the standard global AM 1.5 solar light condition, the photovoltaic performances of both organic dyes have been evaluated in DSSCs on the basis of the iodide/triiodide electrolyte without any coadsorbent or cosensitizer. The DSSCs based on WS-95 display better device performance with power conversion efficiency (η) of 7.69%. The additional coadsorbent in the dye bath of WS-95 does not improve the photovoltaic performance, indicative of its negligible dye aggregation, which can be rationalized by the grafted dioctyl chains on the CPDT unit. The cosensitization of WS-95 with a short absorption wavelength dye S2 enhances the IPCE and improves the η to 9.18%. Our results indicate that extending the π-spacer is more rational than enhancing the electron donor in terms of broadening the spectral response of indoline-based D-A-π-A organic sensitizers.