Hydrogen-bonded linear chain assemblies of palladium(II)-selenoether complexes: solid state aggregates as templates for nano-structural Pd17Se15 leading to efficient electrocatalytic activity

A analogous series of 2-(3,5-dimethylpyrazol-1-yl)phenyl substituted selenoether complexes of palladium [PdCl2(RSeC6H4dmpz)]; (R = CH2COOH (1), CH2CH2COOH (2), and CH2CH2OH (3); dmpz = dimethylpyrazole) were ably synthesized in a facile manner and exhaustively characterized. Insight into molecular structures of these complexes was keenly probed through single crystal X-ray diffraction (XRD) analysis, unfolding the structural scaffolds and laying into molecular aggregation, availed through hydrogen bonding interactions borne out of tethered protic groups. The complexes were converted to capping free palladium selenide (Pd17Se15) nanoparticles through pyrolysis and evaluated for their electrocatalytic efficacy towards the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) in alkaline medium. In an alkaline medium, PSNP1 (Pd17Se15) obtained from the hydrogen bonded aggregate of complex PdCl2L1 (1) produced good HER activity. PSNP1 had a little decrease in current density after 300 continuous cycles, which proves that the catalyst presents high stability in the recycling process. For the electrocatalytic oxidation of CH3OH, the electrocatalytic rate constant (k) obtained was 0.3 × 103 cm3 mol-1 s-1.

Synthesis of unconventional Pd-Se nanoparticles for phase-dependent ethanol electrooxidation

By tuning the amount of the Se precursors during the synthesis, orthorhombic PdSe₂, cubic Pd₁₇Se₁₅, and monoclinic Pd₇Se₂ nanoparticles are synthesized, which show phase-dependent electrocatalysis for the ethanol oxidation reaction. This work advances the controllable synthesis of transition metal selenides and inspires their applications in electrocatalysis.

Single source precursor route for the first graphene oxide-Pd6P nanocomposite: application in electrochemical hydrogen evolution reaction

For the first time, Pd₆P has been synthesised using a simple, straightforward and one-pot method i.e., thermolysis of a Pd(II) complex of a bidentate (P, N) organophosphorus ligand (anthracene-9-yl-CHN-CH₂CH₂-PPh₂). The electrocatalyst (obtained after grafting nanospheres of Pd₆P over layers of graphene oxide) shows high activity in electrochemical hydrogen evolution reactions (HER) with an overpotential of 133 mV to drive 10 mA cm^-2 of cathodic current density. The GO-Pd₆P nanocomposite is robust and effective for a continuous HER run for up to 16 hours.

Reusing Sulfur-Poisoned Palladium Waste as a Highly Active, Nonradical Fenton-like Catalyst for Selective Degradation of Phenolic Pollutants

Recycling of deactivated palladium (Pd)-based catalysts can not only lower the economic cost of their industrial use but also save the cost for waste disposal. Considering that the sulfur-poisoned Pd (Pd_xS_y) with a strong Pd-S bond is difficult to regenerate, here, we propose a direct reuse of such waste materials as an efficient catalyst for decontamination via Fenton-like processes. Among the Pd_xS_y materials with different poisoning degrees, Pd₄S stood out as the most active catalyst for peroxymonosulfate activation, exhibiting pollutant-degradation performance rivaling the Pd and Co²⁺ benchmarks. Moreover, the incorporated S atom was found to tune the surface electrostatic potentials and charge densities of the Pd active site, triggering a shift in catalytic pathway from surface-bound radicals to predominantly direct electron transfer pathway that favors a highly selective oxidation of phenols. The catalyst stability was also improved due to the formation of strong Pd-S bond that reduces corrosion. Our work paves a new way for upcycling of Pd-based industrial wastes and for guiding the development of advanced oxidation technologies toward higher sustainability.

Organoselenium ligands for heterogeneous and nanocatalytic systems: development and applications

Organoselenium ligands have attracted great attention among researchers during the past two decades. Various homogeneous, heterogeneous and nanocatalytic systems have been designed using such ligands. Although reports on selenium ligated homogeneous catalysts are quite high in number, significant work has also been done on the development of heterogeneous and nanocatalytic systems using organoselenium ligands. A review article, focusing on the utility of organoselenium compounds in the development of catalytic systems, was published in 2012 (A. Kumar, G. K. Rao, F. Saleem and A. K. Singh, Dalton Trans., 2012, 41, 11949). Moreover, it mainly covered the homogeneous catalysts. There are no review articles in the literature on heterogeneous and nanocatalytic systems designed using organoselenium compounds and their applications. Hence, this perspective aims to cover the developments pertaining to the synthetic aspects of such catalytic systems (using organoselenium compounds) and their applications in catalysis of a variety of chemical transformations. Salient features and advantages of organoselenium compounds have also been highlighted to justify the rationale behind their use in catalyst development. Their performance in various chemical transformations [viz. Suzuki-Miyaura coupling, Heck coupling, Sonogashira coupling, O-arylation of phenol, transfer hydrogenation of aldehydes and ketones, aldehyde-alkyne-amine (A3) coupling, hydration of nitriles, conversion of aldehydes to amides, cross-dehydrogenative coupling (CDC), photodegradation of substrates (formic acid, methylene blue), reduction of nitrophenols, electrolysis (hydrogen evolution reaction and oxygen reduction reactions), organocatalysis and dye sensitized solar cells] and relevant aspects of catalytic processes (such as recyclability, substrate scope and green aspects) have been critically analyzed. Future perspectives have also been discussed.

The effect on the electrocatalytic activity of the chemical interaction of selenium with palladium centers: oxygen reduction and methanol oxidation reactions in alkaline medium

The chemical reactivity of two different selenium precursors (SeO₂and Se) with nanoparticulated palladium was studied in a simple aqueous phase synthesis to generate palladium selenides (Pd_xSe_y). As confirmed by XRD, XPS, TEM and energy dispersive spectroscopy analyses, the products generated showed different degrees of selenization according to the nature of the chemical precursor. Such degree of selenization was more important with elemental selenium, in contrast to SeO₂. Surface electrochemistry and CO stripping in alkaline medium, clearly revealed the different interactions and stability of Pd_xSe_yachieved with the Pd/C precursor depending on the selenium source. The electrocatalysis of the oxygen reduction reaction was also influenced by the Se source, first in the different degree of reactivity, and second in the selectivity of the reduction product between H₂O and H₂O₂, as well as the tolerance to the methanol oxidation reaction.

Catalytically active nanosized Pd9Te4 (telluropalladinite) and PdTe (kotulskite) alloys: first precursor-architecture controlled synthesis using palladium complexes of organotellurium compounds as single source precursors

Several intermetallic binary phases of Pd-Te including Pd3Te2, PdTe, PdTe2, Pd9Te4, Pd3Te, Pd2Te, Pd20Te7, Pd8Te3, Pd7Te2, Pd7Te3, Pd4Te and Pd17Te4 are known, and negligible work (except few studies on PdTe) has been done on exploring applications of such phases and their fabrication at nanoscale. Hence, Pd(ii) complexes Pd(L1)Cl2 and Pd(L2-H)Cl (L1): Ph-Te-CH2-CH2-NH2 and L2: HO-2-C6H4-CH[double bond, length as m-dash]N-CH2CH2-Te-Ph were synthesized. Under similar thermolytic conditions, complex Pd(L1)Cl2 with bidentate coordination mode of ligand provided nanostructures of Pd9Te4 (telluropalladinite) whereas Pd(L2-H)Cl with tridentate coordination mode of ligand yielded PdTe (kotulskite). Bimetallic alloy nanostructures possess high catalytic potential for Suzuki coupling of aryl chlorides, and reduction of 4-nitrophenol. They are also recyclable upto six reaction cycles in Suzuki coupling.

A nonsymmorphic-symmetry-protected hourglass Weyl node, hybrid Weyl node, nodal surface, and Dirac nodal line in Pd4X (X = S, Se) compounds

Nonsymmorphic symmetry has been proved to protect band crossings in topological semimetals/metals. In this work, based on the symmetry analysis and first-principles calculations, we reveal rich topological phases in compounds Pd4X (X = S, Se), which are protected by nonsymmorphic symmetry. In the absence of spin-orbit coupling (SOC), it shows the coexistence of the type-I Weyl point and type-II Weyl point. Here, due to the screw rotation, the type-I Weyl point takes an hourglass form. However, this hourglass Weyl point can be gapped in the presence of SOC. Furthermore, a combination of nonsymmorphic twofold screw-rotational symmetry and time-reversal symmetry protects a nodal surface. Particularly, this nodal surface is robust against SOC. In addition, a combination of the glide mirror and time-reversal symmetry contributes a nodal line of double degeneracy. In the presence of SOC, there emerges hybridization of type-I and type-II Weyl points. Meanwhile, there also appears a Dirac nodal line-a fourfold degenerate nodal line under SOC, which is protected by nonsymmorphic symmetries. Our works suggest realistic materials to study Weyl nodes of type-I and type-II, and their hybridization, as well as symmetry-protected nodal surfaces and Dirac nodal lines.

Reactivity of hemi-labile pyridyl and pyrimidyl derived chalcogen ligands towards group 10 metal phosphine precursors

The reactivity of N-heterocyclic dichalcogenides and their sodium salts towards group 10 metal phosphine precursors has been investigated.

Direct deposition of a nanoporous palladium electrocatalyst for efficient hydrogen evolution reaction

The porous palladium directly deposited on metallic substrates by aerosol-assisted chemical vapor deposition exhibits remarkable HER performance in an acidic electrolyte.

Electrodeposited Pd/graphene/ZnO/nickel foam electrode for the hydrogen evolution reaction

Efficient electrocatalysts are crucial to water splitting for renewable energy generation. In this work, electrocatalytic hydrogen evolution from Pd nanoparticle-modified graphene nanosheets loaded on ZnO nanowires on nickel foam was studied in an alkaline electrolyte. The high electron mobility stems from the cylindrical ZnO nanowires and the rough surface on the graphene/ZnO nanowires increases the specific surface area and electrical conductivity. The catalytic activity arising from adsorption and desorption of intermediate hydrogen atoms by Pd nanoparticles improves the hydrogen evolution reaction efficiency. As a hydrogen evolution reaction (HER) catalyst, the Pd/graphene/ZnO/Ni foam (Pd/G/ZnO/NF) nanocomposite exhibits good stability and superior electrocatalytic activity. Linear sweep voltammetry (LSV) revealed an overpotential of −31 mV and Tafel slope of 46.5 mV dec⁻¹ in 1 M KOH. The economical, high-performance, and environmentally friendly materials have excellent prospects in hydrogen storage and hydrogen production.

Efficient electrocatalysts are crucial to water splitting for renewable energy generation.

Facile Electrodeposition of Ni-Cu-P Dendrite Nanotube Films with Enhanced Hydrogen Evolution Reaction Activity and Durability

Hydrogen can be the potential substitute energy carrier for fuel while electrolysis water with hydrogen evolution reaction (HER) is an efficient way to produce hydrogen. Highly active and robust electrocatalysts composed by earth abundant elements are required. Herein, nickel-copper-phosphorus (Ni-Cu-P) electrocatalysts are designed and synthesized by a facile one-step electrodeposition method. A unique pine-needle-like dendrite nanotube morphology of Ni-Cu-P electrocatalyst can be synthesized when copper content changed and impressive HER activity obtained in alkaline and acidic media. Briefly, the overpotential reaches 120 mV in 1 M KOH and 150 mV in 0.5 M H₂SO₄ at the current density of 10 mA cm^-2, with the corresponding Tafel slope reaching 69 mV dec^-1. The results are close to that of commercial Pt/C catalysts (37 mV in 1 M KOH). Furthermore, the density functional theory calculations also demonstrate that P-incorporated Ni-Cu, Cu-incorporated Ni-P, and Ni-incorporated Cu-P have the optimized hydrogen adsorption free energy (Δ G_H*) of -0.066, -0.157, and -0.003 eV, respectively, which are more suitable than those of Ni-Cu, Ni-P, and Cu-P, respectively. The Ni-incorporated Cu-P even has a much smaller Δ G_H* of -0.003 than that of Pt (∼-0.09 eV). We believe that our study will provide a new strategy to design non-noble metal alloy materials for practical applications in catalysis and energy fields.

One-step electrodeposition of a hierarchically structured S-doped NiCo film as a highly-efficient electrocatalyst for the hydrogen evolution reaction

An enormous challenge in the development of renewable hydrogen sources for electricity-driven water-splitting systems has been the limitation of the earth-abundant and robust highly-active cathode electrocatalysts. In this work, we developed a simple sulfur-anion doping strategy to obtain the S-doped NiCo composite (S-NiCo@50) on Ni foam (NF) via a one-step electrochemical deposition. It was found that doped sulfur plays a crucial role in reducing the overpotential of hydrogen evolution by providing abundant active sites as identified by the XPS spectrum. The formed metallic Ni and Co effectively promoted electron transportation. The synergistic effects between the amorphous CoxNiyS(x+y) substance and crystalline Ni and Co metal seemed to result in enhanced HER activity. In particular, the S-NiCo@50 electrode, featuring a hierarchical morphology, showed an ultralow overpotential of 28 and 125 mV at 10 and 100 mA cm-2, respectively, in 1.0 M NaOH with a large exchange current density (j0) of 4.8 mA cm-2 as well as high conductivity and stability; its catalytic properties are superior to most of the reported alkaline electrocatalysts and are on par with commercial Pt/C. Assembled with the counter electrode (Ni-Fe/NF), the overall water splitting was proved with a low 1.55 V at 10 mA cm-2. Moreover, we built the Ni24Co6S6 cluster as the S-NiCo@50 model and revealed its intrinsic activity by density functional theory (DFT) calculations. This study shows that S-doping and component control can be an exquisite strategy for realizing high-efficiency electrochemical water reduction.

Monodisperse Palladium Sulfide as Efficient Electrocatalyst for Oxygen Reduction Reaction

In this study, we report a colloidal synthesis of palladium sulfides (including Pd₁₆S₇, Pd₄S, and PdS) via a facile one-pot hot-solution synthetic route and their promising application as electrocatalyst for the oxygen reduction reaction (ORR). Among the different palladium sulfides tested, monodisperse Pd₄S nanoparticles exhibit the best electrocatalytic activity toward ORR in alkaline medium, with the half-wave potential ca. 47 mV more positive than that of the state-of-the-art Pt/C catalyst. Density functional theory calculations indicate the existence of oxygen absorption sites in Pd₄S surface result in optimized oxygen-binding ability for the four-electron oxygen reduction.

An overview on Pd-based electrocatalysts for the hydrogen evolution reaction

The electrochemical hydrogen evolution reaction (HER) is a well-studied reaction which involves the reduction of protons for hydrogen production. Pd-based compounds are expected to have activity on par with or better than the expensive state-of-the-art Pt and can be considered as the future materials for the HER.

Rapid Adsorption Enables Interface Engineering of PdMnCo Alloy/Nitrogen-Doped Carbon as Highly Efficient Electrocatalysts for Hydrogen Evolution Reaction

The catalytic performance of Pd-based catalysts has long been hindered by surface contamination, particle agglomeration, and lack of rational structural design. Here we report a simple adsorption method for rapid synthesis (∼90 s) of structure-optimized Pd alloy supported on nitrogen-doped carbon without the use of surfactants or extra reducing agents. The material shows much lower overpotential than 30 wt % Pd/C and 40 wt % Pt/C catalysts while exhibiting excellent durability (80 h). Moreover, unveiled by the density functional theory (DFT) calculation results, the underlying reason for the outstanding performance is that the PdMnCo alloy/pyridinic nitrogen-doped carbon interfaces weaken the hydrogen-adsorption energy on the catalyst and thus optimize the Gibbs free energy of the intermediate state (ΔG_H*), leading to a remarkable electrocatalytic activity. This work also opens up an avenue for quick synthesis of a highly efficient structure-optimized Pd-based catalyst.

Palladium(ii) complexes of N,N-diphenylacetamide based thio/selenoethers and flower shaped Pd16S7and prismatic Pd17Se15nano-particles tailored as catalysts for C–C and C–O coupling

Pd₁₆S₇/Pd₁₇Se₁₅NPs of shapes unknown hitherto and their Pd precursors (0.0001 mol%) are efficient/reusable catalysts for Suzuki–Miyaura/C–O coupling.

One-Step Electrodeposition of Co/CoP Film on Ni Foam for Efficient Hydrogen Evolution in Alkaline Solution

The development of high-efficiency catalysts for hydrogen evolution via water splitting has been an effective strategy to solve the energy environmental problems and energy crisis. The abundant-reserving transition metals and their phosphides are becoming attractive Pt alternatives for hydrogen evolution reaction (HER). Herein, a crystalline/amorphous Co/CoP film was facilely prepared on nickel foam (NF) by a one-step electrodeposition technique at room temperature, named Co/CoP-NF. The as-prepared Co/CoP-NF electrocatalyst exhibits excellent electrocatalytic activity for HER, on par with Pt/C, showing a low overpotential of 35 mV at a current density of 10 mA·cm^-2 and small Tafel slope of 71 mV·dec^-1 in 1.0 M NaOH solution. More importantly, the Co/CoP-NF catalyst presents good long-term durability at an overpotential of 60 mV. Moreover, the influence of the electrodeposition parameters on the catalytic performance of the catalyst was discussed. This study offers an effective strategy to develop a non-noble-metal HER catalyst for industrial production of hydrogen.

Electrochemical Dealloying of PdCu3 Nanoparticles to Achieve Pt-like Activity for the Hydrogen Evolution Reaction

Manipulating the d-band center of the metal surface and hence optimizing the free energy of hydrogen adsorption (ΔG_H ) close to the optimal adsorption energy (ΔG_H =0) for hydrogen evolution reaction (HER), is an efficient strategy to enhance the activity for HER. Herein, we report a oleylamine-mediated (acting as the solvent, stabilizer, and reducing agent) strategy to synthesize intermetallic PdCu₃ nanoparticles (NPs) without using any external reducing agent. Upon electrochemical cycling, PdCu₃ transforms into Pd-rich PdCu (ΔG_H =0.05 eV), exhibiting remarkably enhanced activity (with a current density of 25 mA cm^-2 at ∼69 mV overpotential) as an alternative to Pt for HER. The first-principle calculation suggests that formation of low coordination number Pd active sites alters the d-band center and hence optimal adsorption of hydrogen, leading to enhanced activity. This finding may provide guidelines towards the design and development of Pt-free highly active and robust electrocatalysts.

A new stable Pd–Mn3O4 nanocomposite as an efficient electrocatalyst for the hydrogen evolution reaction

A galvanic exchange reaction-mediated one-pot synthesis of Pd–Mn₃O₄ nanocomposites for excellent electrocatalytic activity and stability towards the hydrogen evolution reaction.