Hydrogen production via photoreforming of wastewater under LED light-driven over CuO@exfoliated g-C3N4 nanoheterojunction

As the global interest heading towards net zero emission by 2050, clean hydrogen production technologies becomes limelight among the research community. Besides, the generation of large quantity of industrial wastewaters creates huge dilemma and needs special attention. In this work, synthetic wastewater using formaldehyde (FA) as a model organic pollutant was utilized to produce hydrogen. The photocatalyst, CuO@exfoliated g-C₃N₄ nanoheterojunction was synthesized by an acid treatment and facile chemical precipitation technique. XRD results confirmed the successful formation of exfoliated g-C₃N₄ by expanding the interlayer spacing of the nanosheets via shifting of characteristic peak of graphite towards lower 2θ from 27.97° to 27.04°. Meanwhile, the BET surface area of CuO@exfoliated g-C₃N₄ (199.3 m²/g) was remarkably enhanced as compared to bulk g-C₃N₄ (34.5 m²/g) and exfoliated g-C₃N₄ (104.4 m²/g). The existence of large pores (3.55 cm³/g) in CuO@exfoliated g-C₃N₄ promotes the accessibility of reactant to the surface active sites, escalating the redox reactions. Study on hydrogen production via photoreforming of aqueous formaldehyde over the prepared photocatalysts were conducted. Interestingly, hydrogen generated using CuO@exfoliated g-C₃N₄ (3867 μmol/g) was greatly enhanced by 7 times and 13 times than the counterparts catalysts, exfoliated g-C₃N₄ (532 μmol/g) and pure CuO (271 μmol/g) respectively. By employing the CuO@exfoliated g-C₃N₄ nanoheterojunction, the optimum hydrogen with apparent quantum efficiency (AQE) of 5664 μmol/g and 22% were obtained respectively. Besides, S-scheme reaction mechanism was proposed based on heterojunction formed between the p-type CuO and n-type exfoliated g-C₃N₄ nanosheets.

One-Step Synthesis of Co-Doped In2O3 Nanorods for High Response of Formaldehyde Sensor at Low Temperature

Uniform and monodisperse Co-doped In₂O₃ nanorods were fabricated by a facile and environmentally friendly hydrothermal strategy that combined the subsequent annealing process, and their morphology, structure, and formaldehyde (HCHO) gas sensing performance were investigated systematically. Both pure and Co-doped In₂O₃ nanorods had a high specific surface area, which could offer abundant reaction sites to gas molecular diffusion and improve the response of the gas sensor. Results revealed that the In₂O₃/1%Co nanorods exhibited a higher response of 23.2 for 10 ppm of HCHO than that of the pure In₂O₃ nanorods by 4.5 times at 130 °C. More importantly, the In₂O₃/1%Co nanorods also presented outstanding selectivity and long-term stability. The superior gas sensing properties were mainly attributed to the incorporation of Co, which suggested the important role of the amount of oxygen vacancies and adsorbed oxygen in enhancing HCHO sensing performance of In₂O₃ sensors.