MOF-derived CuxS double-faced-decorated carbon nanosheets as high-performance and stable counter electrodes for quantum dots solar cells

The development of highly-catalytic counter electrode (CE) materials is vital to the construction of quantum dot-sensitized solar cells (QDSCs) but is still challenging. Here, a novel self-assembly double-faced decorated carbon nanosheets with MOF-derived Cu_xS nanospheres (DF-Cu_xS/C NSs) were prepared as high-performance hybrid CEs for improving the catalytic activity towards polysulfide electrolytes and enhancing the performance of QDSCs. It is shown that the MOF-derived Cu_xS nanospheres disperse well on the surface of the carbon NSs in the obtained DF-Cu_xS/C NSs hybrids. Electrochemical characterization demonstrated that the DF-Cu_xS/C NSs with moderate mass ratio exhibited enhanced electrocatalytic activity towards the reduction of the polysulfide redox couple (S_n^2-/S^2-) and decreased charge transfer resistance at the interface of the CE/electrolyte. Benefitting from the merits of this novel hybrid CE, the power conversion efficiency (PCE) of the CdSeTe QDs-based QDSCs is increased to 9.39%, which is higher than the pristine carrageenan (CA)-derived CEs (5.84%) and Cu-BTC-derived CEs (7.74%). With the further optimization of the substrate, the highest PCE of 11.36% was achieved based on the Ti mesh substrate supported hybrid CE.

Surface modification of CuS counter electrodes by hydrohalic acid treatment for improving interfacial charge transfer in quantum-dot-sensitized solar cells

High charge transfer resistance and low electrocatalytic activity of counter electrodes (CEs) are mainly responsible for the poor photovoltaic performance of quantum-dot-sensitized solar cells (QDSSCs). Herein, a novel strategy has been successfully introduced for the first time to improve the electrocatalytic activity and charge transfer properties of a copper sulfide (CuS) CE by modifying it with the addition of hydrohalic acids (HHA). Through the suitable surface modification of HHA-incorporated CuS CE, the charge transfer from the external circuit to the CE surface was effectively facilitated. The electrochemical analyses suggest that charge transfer resistance is sufficiently reduced at the CE/electrolyte interface by using the HHA-treated CuS CEs. This improvement is mainly attributed to the high electrocatalytic activity of the modified CEs for the reduction of the polysulfide redox couple electrolyte in QDSSCs. The device constructed with TiO₂/CdS/CdSe/ZnS photoanodes and the hydrogen-fluoride-treated CuS (HFCuS) CE exhibits a power conversion efficiency of 4.25%, which is considerably higher than that of the device with the bare CuS CE (3.11%). These findings can facilitate the fabrication of highly efficient CEs for next-generation solar cells.

Enhanced Supercapacitor Performance and Electromagnetic Interference Shielding Effectiveness of CuS Quantum Dots Grown on Reduced Graphene Oxide Sheets

This study is focused on the preparation of the CuS/RGO nanocomposite via the hydrothermal method using GO and Cu-DTO complex as precursors. X-ray diffraction, Fourier-transform infrared spectroscopy, and Raman and X-ray photoelectron spectroscopy study revealed the formation of the CuS/RGO nanocomposite with improved crystallinity, defective nanostructure, and the presence of the residual functional group in the RGO sheet. The morphological study displayed the transformation of CuS from nanowire to quantum dots with the incorporation of RGO. The galvanostatic charge/discharge curve showed that the CuS/RGO nanocomposite (12 wt % Cu-DTO complex) has tremendous and outperforming specific capacitance of 3058 F g-1 at 1 A g-1 current density with moderate cycling stability (∼60.3% after 1000 cycles at 10 A g-1). The as-prepared nanocomposite revealed excellent improvement in specific capacitance, cycling stability, Warburg impedance, and interfacial charge transfer resistance compared to neat CuS. The fabricated nanocomposites were also investigated for their bulk DC electrical conductivity and EMI shielding ability. It was observed that the CuS/RGO nanocomposite (9 wt % Cu-DTO) exhibited a total electromagnetic shielding efficiency of 64 dB at 2.3 GHz following absorption as a dominant shielding mechanism. Such a performance is ascribed to the presence of interconnected networks and synergistic effects.

Electrochemical Fingerprint of CuS-Hexagonal Chemistry from (Bis(N-1,4-Phenyl-N-(4-Morpholinedithiocarbamato) Copper(II) Complexes) as Photon Absorber in Quantum-Dot/Dye-Sensitised Solar Cells

The main deficit of quantum dot/dye-sensitised solar cells (QDSSCs) remains the absence of a photosensitiser that can absorb the entire visible spectrum and increase electrocatalytic activity by enhancing the conversion efficiency of QDSSCs. This placed great emphasis on the synthesis route adopted for the preparation of the sensitiser. Herein, we report the fabrication of hexagonal copper monosulfide (CuS) nanocrystals, both hexadecylamine (HDA) capped and uncapped, through thermal decomposition by thermogravimetric analysis (TGA) and a single-source precursor route. Morphological, structural, and electrochemical instruments were used to assert the properties of both materials. The CuS/HDA photosensitiser demonstrated an appropriate lifetime and electron transfer, while the electron back reaction of CuS lowered the electron lifetime in the QDSSCs. The higher electrocatalytic activity and interfacial resistance observed from current density-voltage (I–V) results agreed with electrochemical impedance spectroscopy (EIS) results for CuS/HDA. The successful fabrication of hexagonal CuS nanostructures of interesting conversion output suggested that both HDA capped and uncapped nanocrystals could be adopted in photovoltaic cells.

An innovative catalyst design as an efficient electro catalyst and its applications in quantum-dot sensitized solar cells and the oxygen reduction reaction for fuel cells

Highly-efficient Co_90%Ni_10% catalytic nanostructures on FTO and Ni-foam show high performance in QDSSCs and fuel cells.

A hydrothermal reaction combined with a post anion-exchange reaction of hierarchically nanostructured NiCo2S4 for high-performance QDSSCs and supercapacitors

This paper proposes a strategy to synthesize NiCo₂S₄via a hydrothermal reaction combined with a post anion-exchange reaction that was used directly as an electrode in supercapacitor and quantum-dot sensitized solar cells.

Reduced recombination with an optimized barrier layer on TiO2 in PbS/CdS core shell quantum dot sensitized solar cells

A solar cell based on a double coating electrode (MgO/Al₂O₃) on TiO₂ yielded excellent performance with an efficiency (η) of 3.25%.