Development of a new phosphorescence sensor based on surface molecularly imprinted Mn-doped ZnS quantum dots for detection of melamine in milk products

This paper presents a novel room temperature phosphorescence sensor (IMIPs-ZnS QDs RTP sensor) based on inorganic surface molecularly imprinted polymers and Mn-doped ZnS quantum dots (QDs) for the rapid detection of trace melamine (MEL) in commercial milk products. The surface of Mn-ZnS QDs was modified with 3-(mercaptopropyl) trimethoxy silane (MPTS). Then, MEL, 3-aminopropyltriethoxysilane (APTES) and tetraethoxysilane (TEOS) were used as a template/target molecule, functional monomer, and cross-linker, respectively. IMIPs-ZnS QDs RTP sensor was characterized using spectrofluorimeter, UV-Vis spectrophotometer, FT-IR, transmission electron microscope (TEM), and X-ray photoelectron spectrometer (XPS). Detection time and linear range for IMIPs-ZnS QDs RTP sensor were 30 min and 4.0-79.2 µM with a correlation coefficient value of 0.9946, respectively. Furthermore, LOD and LOQ values were calculated using Stern-Volmer equation as 0.29 and 0.97 µM, respectively. Thus, IMIPs-ZnS QDs RTP sensor was successfully applied for the detection of MEL residue in milk samples. Recovery values were in the range of 88.62-90.22 % with relatively high precision values (0.57-0.92 % RSD). Our findings indicate that the developed IMIPs-ZnS QDs RTP sensor exhibits high sensitivity and selectivity towards the MEL in milk sample containing potentially relatively high number of interfering compounds.

Biomimetic recognition strategy for efficient capture and release of circulating tumor cells

Efficient capture and release of circulating tumor cells play an important role in cancer diagnosis, but the limited affinity of monovalent adhesion molecules in existing capture technologies leads to low capture efficiency, and the captured cells are difficult to be separated. Inspired by the phenomenon that the long tentacles of jellyfish contain multiple adhesion domains and can effectively capture moving food, we have constructed a biomimetic recognition strategy to capture and release tumor cells. In details, gold-coated magnetic nanomaterials (Au@Fe₃O₄ NPs) were first prepared and characterized by scanning electron microscopy, UV-vis absorption spectra, and Zeta potential. Then, the DNA primers modified on Au@Fe₃O₄ nanoparticles can be extended to form many radialized DNA products by rolling circle amplification. These long DNA products resemble jellyfish tentacles and contain multivalent aptamers that can be extended into three dimensions to increase the accessibility of target cells, resulting in efficient, simple, rapid, and specific cells capture. The capture efficiencies are no less than 92% in PBS buffer and 77% in blood. Subsequently, DNase I was selected to degrade biomimetic tentacles to release the captured tumor cells with high viability. This release strategy can not only improve cell viability, but also reduce a tedious release process and unnecessary costs. We believe that the proposed method can be expanded for the capture and release of various tumor cells and will inspire the development of circulating tumor cells analysis. A biomimetic recognition strategy for capture and release of circulating tumor cells has been developed. This method modified specific P1 DNA primers on Au@Fe₃O₄ NPs to form many radialized DNA products by rolling circle amplification. These products can efficiently capture CTCs since it contains multiple aptamers with a multivalent binding capacity. This make it a promising tool to capture and release of other tumor cells, and will inspire the development of CTC analysis.

Selective and sensitive determination of celastrol in traditional Chinese medicine based on molecularly imprinted polymers modified Mn-doped ZnS quantum dots optosensing materials

In this work, we proposed a facile strategy to prepare molecularly imprinted polymers (MIPs) modified Mn-doped ZnS quantum dots (QDs) as optosensing materials via sol-gel polymerization for specific recognition of celastrol (Cel) in traditional Chinese medicine (TCM). Firstly, L-Cysteine (L-Cys) modified Mn-doped ZnS QDs (L-Cys@Mn-ZnS) was used as imprinting substrate. The amino and carboxyl groups on the surface of Mn-ZnS QDs can provide more binding sites for imprinting polymerization. Then, the fluorescent MIPs was synthesized in the presence of L-Cys@Mn-ZnS QDs, template celastrol, 3-aminopropyl triethoxysilane (APTES) and ammonium hydroxide in the ethanol-water (9/1, v/v) solution. The morphology and structure of the products were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometer (XRD) and X-ray photoelectron spectroscopy (XPS). The resulting MIPs functionalized Mn-doped ZnS QDs (denoted as MIPs@L-Cys@Mn-ZnS QDs) had higher imprinting factor of 14.19 and significant selectivity. The MIPs@L-Cys@Mn-ZnS QDs as fluorescent probe exhibited sensitive response to Cel in the linear range from 0.1 μM to 3.5 μM and the limit of detection was estimated to be 35.2 nM. The probe was also applied for the detection of Cel in traditional Chinese medicine with recovery ranged from 88.0%-105.0%. The results confirmed that MIPs@L-Cys@Mn-ZnS QDs could efficiently and specifically capture Cel from actual complex traditional Chinese medicine samples.

Detection of resveratrol by phosphorescence quantum dots without conjunction and mutual impact exploration

In this study, a convenient and sensitive method for the detection of resveratrol was established based on phosphorescence quenching of resveratrol for MPA-capped Mn:ZnS QDs. The quenching intensity was in proportion to the concentration of resveratrol within a certain range. Under optimal conditions, the present assay was valid for detecting resveratrol in the range from 0.03 μM to 14 μM with a detection limit of 0.01 μM. The mechanism of action was also explored, and its application in actual samples was also demonstrated with satisfactory results. This study aims to provide a convenient method for the detection of resveratrol.

Synthesis and Characterization of Surface Modified, Fluorescent and Biocompatible ZnS Nanoparticles with a Hydrophobic Chitosan Derivative

The introduction of a hydrophobic moiety on chitosan enhances the self-assembling properties, mucoadhesion, the permeability of the macromolecule and aids in target specific delivery. Our group synthesized a hydrophobic trans N-(6,6-Dimethyl-2-hepten-4-ynyl)chitosan derivative (CSD) and studied the surface modification of ZnS nanoparticles in a single pot reaction. X-ray diffraction studies and FESEM imaging confirms the nano size and morphology of the surface modified Zinc sulfide nanoparticles (ZnS-CSD NPs). The proposed ZnS-CSD NPs showed excellent emission at 457 nm. Photostability studies indicate that the surface modified ZnS-CSD NPs possess better photostability than Rhodamine B and FITC. Cell viability tests confirmed the biocompatibility of the modified nanoparticles. All these features of ZnS- CSD NPs makes these candidates an excellent choice in a wide range of in vitro or in vivo studies as fluorescent biological labels.