N-Doped graphene frameworks with superhigh surface area: excellent electrocatalytic performance for oxygen reduction

Graphene frameworks-confined synthesis of 2D-layered NiCoP for the electrochemical sensing of H2O2 at lower overpotential

A new 2D-layered nickel cobalt phosphide nanosheet confined by 3D graphene frameworks (denoted as NiCoP/GFs) is in situ controllably synthesized as a highly efficient and durable electrocatalyst, which is obtained from the transformation of corresponding NiCo layer double hydroxides and GFs. Hydrogen peroxide (H₂O₂) is selected as a demonstration to study the electrochemical sensing performance of the NiCoP/GFs. Benefiting from 2D morphology of NiCoP and network structure of GFs, NiCoP/GFs exhibits remarkable electroactivity toward H₂O₂ at a relatively low overpotential of approximately - 0.3 V (vs sat. Ag/AgCl) in 0.01 M phosphate-buffered saline solution (PBS, pH = 7.4). The NiCoP/GFs-based H₂O₂ electrochemical sensor achieves a high sensitivity of ∼4398 μA mM^-1 cm^-2, a low detection limit of 0.028 ± 0.006 μM, and desirable selectivity. In addition, the sensor can sensitively detect H₂O₂ from living cancer cells. This study not merely broadens the synthesis methods of transition metal phosphide-based nanocrystals but the NiCoP/GFs also has broad prospects in diverse electrochemistry fields. We have reported a controllable synthesis of 2D nickel cobalt phosphide nanosheet confined by graphene frameworks (denoted as NiCoP/GFs) as a greatly efficient and durable electrocatalyst. The NiCoP/GFs exhibits remarkable electroactivity toward detection of H₂O₂ at a relatively low overpotential of approximately -0.3 V. Density functional theory (DFT) calculations further prove that regulation of the electronic structure of NiCoP by GFs lowers the adsorption free energy of *OOH intermediates, and thus contributes to the greatly improved the electrocatalytic performance of NiCoP/GFs toward H₂O₂ reduction. The developed NiCoP/GFs can be applied as excellent electrode materials for efficient electrochemical sensing of H₂O₂.

Eco-Friendly Nitrogen-Doped Graphene Preparation and Design for the Oxygen Reduction Reaction

Four N-doped graphene materials with a nitrogen content ranging from 8.34 to 13.1 wt.% are prepared by the ball milling method. This method represents an eco-friendly mechanochemical process that can be easily adapted for industrial-scale productivity and allows both the exfoliation of graphite and the synthesis of large quantities of functionalized graphene. These materials are characterized by transmission and scanning electron microscopy, thermogravimetry measurements, X-ray powder diffraction, X-ray photoelectron and Raman spectroscopy, and then, are tested towards the oxygen reduction reaction by cyclic voltammetry and rotating disk electrode methods. Their responses towards ORR are analysed in correlation with their properties and use for the best ORR catalyst identification. However, even though the mechanochemical procedure and the characterization techniques are clean and green methods (i.e., water is the only solvent used for these syntheses and investigations), they are time consuming and, generally, a low number of materials can be prepared, characterized and tested. In order to eliminate some of these limitations, the use of regression learner and reverse engineering methods are proposed for facilitating the optimization of the synthesis conditions and the materials’ design. Thus, the machine learning algorithms are applied to data containing the synthesis parameters, the results obtained from different characterization techniques and the materials response towards ORR to quickly provide predictions that allow the best synthesis conditions or the best electrocatalysts’ identification.

Three-Dimensional Graphene-Based Macrostructures for Electrocatalysis

Electrochemical energy storage and conversion is an effective strategy to relieve the increasing energy and environment crisis. The sluggish reaction kinetics in the related devices is one of the major obstacles for them to realize practical applications. More efforts should be devoted to searching for high-efficiency electrocatalysts and enhancing the electrocatalytic performance. 3D graphene macrostructures (3D GMs) are one kind of porous crystalline materials with 3D structures at both micro- and macro-scale. The unique structure can achieve large accessible surface area, expose many active sites, promote fast mass/electron transport, and provide wide room for further functional modification. All these features make them promising candidates for electrocatalysis. In this review, the authors focus on the latest progress of 3D GMs for electrocatalysis. First, the preparation methods of 3D GMs are introduced followed by the strategies for functional modifications. Then, their electrocatalytic performances are discussed in detail including monofunctional and bifunctional electrocatalysis. The electrocatalytic processes involve oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, and carbon dioxide reduction reaction. Finally, the challenges and perspectives are presented to offer a guideline for the exploration of excellent 3D GM-based electrocatalysts.

General and fast synthesis of graphene frameworks using sugars for high-performance hydrogen peroxide nonenzymatic electrochemical sensor

3D graphene frameworks (GFs) are fast and scalably synthesized via a general and facile method from the rich biomass of sugars with the aid of molten salts, using glucose as the prototype, to obtain an effective sensing platform for sensitive nonenzymatic hydrogen peroxide (H₂O₂) detection. The electroactive area of the GFs/GCE (0.1437 cm²) is obviously higher than that of bare GCE (0.0653 cm²). The GFs are found to exhibit remarkable electrocatalytic activity toward H₂O₂ reduction while avoiding enzyme loading. The electrochemical sensor for H₂O₂ based on GFs displays a low detection limit of 0.032 ± 0.005 μM (S/N = 3) at a working potential of - 0.55 V in 0.01 M N₂-saturated phosphate-buffered saline (PBS, pH = 7.4) by an amperometric method. The sensor has good selectivity over other compounds such as ascorbic acid, dopamine, uric acid, NaCl, citric acid, and glucose. Moreover, the sensor shows excellent reproducibility with a relative standard deviation of 3.7% and acceptable stability after 30 days of usage. Furthermore, it can detect H₂O₂ released from living tumorigenic cells in real time. Most importantly, it is demonstrated that such GFs can be obtained from a variety of sugars (sucrose, fructose, lactose, and maltose). This work may offer a new general avenue for the synthesis of 3D GFs and promote the development of electrochemical sensors. Graphical abstract We have reported a general and fast method to synthesize GFs from sugars (glucose, sucrose, fructose, lactose, and maltose) with the addition of molten Na₂CO₃ salt as a template. The developed GFs can be applied as excellent electrode materials for efficient electrochemical sensing of H₂O₂.

Nanomaterial Patterning in 3D Printing

The synergistic integration of nanomaterials with 3D printing technologies can enable the creation of architecture and devices with an unprecedented level of functional integration. In particular, a multiscale 3D printing approach can seamlessly interweave nanomaterials with diverse classes of materials to impart, program, or modulate a wide range of functional properties in an otherwise passive 3D printed object. However, achieving such multiscale integration is challenging as it requires the ability to pattern, organize, or assemble nanomaterials in a 3D printing process. This review highlights the latest advances in the integration of nanomaterials with 3D printing, achieved by leveraging mechanical, electrical, magnetic, optical, or thermal phenomena. Ultimately, it is envisioned that such approaches can enable the creation of multifunctional constructs and devices that cannot be fabricated with conventional manufacturing approaches.

Electrochemical Reduction of CO2 to CO by N,S Dual-Doped Carbon Nanoweb Catalysts

Converting CO₂ into useful chemicals through an electrocatalytic process is an attractive solution to reduce CO₂ in the atmosphere. However, the process suffers from high overpotential, low activity, or poor product selectivity. In this study, N,S dual-doped carbon nanoweb (NSCNW) materials were proposed as an efficient nonmetallic electrocatalyst for CO₂ reduction. The NSCNW catalysts preferentially and rapidly converted CO₂ into CO with a high Faradaic efficiency of 93.4 % and a partial current density of -5.93 mA cm^-2 at a low overpotential of 490 mV. A small Tafel slope value (93 mV dec^-1 ) was obtained, demonstrating a high rate for CO₂ reduction. Moreover, the catalysts also exhibited a quite stable current-density profile during 20 h with a high CO Faradaic efficiency above 90 % throughout the electrolysis reaction. The high catalytic performance of the catalysts for CO₂ reduction could be attributed to synergistic effects associated with the structural advantages of 3 D carbon nanoweb structures and effective S doping of the carbon materials with the highest ratio of thiophene-like S to oxidized S species.

Facile charge transfer in fibrous PdPt bimetallic nanocube counter electrodes

Enhanced charge transfer is realized in DSSCs that utilize poriferous PdPt bimetallic nanocubes as the counter electrode.

Creation of Triple Hierarchical Micro-Meso-Macroporous N-doped Carbon Shells with Hollow Cores Toward the Electrocatalytic Oxygen Reduction Reaction

A series of triple hierarchical micro-meso-macroporous N-doped carbon shells with hollow cores have been successfully prepared via etching N-doped hollow carbon spheres with CO₂ at high temperatures. The surface areas, total pore volumes and micropore percentages of the CO₂-activated samples evidently increase with increasing activation temperature from 800 to 950 °C, while the N contents show a contrary trend from 7.6 to 3.8 at%. The pyridinic and graphitic nitrogen groups are dominant among various N-containing groups in the samples. The 950 °C-activated sample (CANHCS-950) has the largest surface area (2072 m² g^-1), pore volume (1.96 cm³ g^-1), hierarchical micro-mesopore distributions (1.2, 2.6 and 6.2 nm), hollow macropore cores (~91 nm) and highest relative content of pyridinic and graphitic N groups. This triple micro-meso-macropore system could synergistically enhance the activity because macropores could store up the reactant, mesopores could reduce the transport resistance of the reactants to the active sites, and micropores could be in favor of the accumulation of ions. Therefore, the CANHCS-950 with optimized structure shows the optimal and comparable oxygen reduction reaction (ORR) activity but superior methanol tolerance and long-term durability to commercial Pt/C with a 4e^--dominant transfer pathway in alkaline media. These excellent properties in combination with good stability and recyclability make CANHCSs among the most promising metal-free ORR electrocatalysts reported so far in practical applications.

Facile Synthesis of N-Doped Graphene-Like Carbon Nanoflakes as Efficient and Stable Electrocatalysts for the Oxygen Reduction Reaction

A series of N-doped carbon materials (NCs) were synthesized by using biomass citric acid and dicyandiamide as renewable raw materials via a facile one-step pyrolysis method. The characterization of microstructural features shows that the NCs samples are composed of few-layered graphene-like nanoflakes with controlled in situ N doping, which is attributed to the confined pyrolysis of citric acid within the interlayers of the dicyandiamide-derived g-C₃N₄ with high nitrogen contents. Evidently, the pore volumes of the NCs increased with the increasing content of dicyandiamide in the precursor. Among these samples, the NCs nanoflakes prepared with the citric acid/dicyandiamide mass ratio of 1:6, NC-6, show the highest N content of ~6.2 at%, in which pyridinic and graphitic N groups are predominant. Compared to the commercial Pt/C catalyst, the as-prepared NC-6 exhibits a small negative shift of ~66 mV at the half-wave potential, demonstrating excellent electrocatalytic activity in the oxygen reduction reaction. Moreover, NC-6 also shows better long-term stability and resistance to methanol crossover compared to Pt/C. The efficient and stable performance are attributed to the graphene-like microstructure and high content of pyridinic and graphitic doped nitrogen in the sample, which creates more active sites as well as facilitating charge transfer due to the close four-electron reaction pathway. The superior electrocatalytic activity coupled with the facile synthetic method presents a new pathway to cost-effective electrocatalysts for practical fuel cells or metal-air batteries.

Facile Synthesis of Defect-Rich and S/N Co-Doped Graphene-Like Carbon Nanosheets as an Efficient Electrocatalyst for Primary and All-Solid-State Zn-Air Batteries

Developing facile and low-cost porous graphene-based catalysts for highly efficient oxygen reduction reaction (ORR) remains an important matter for fuel cells. Here, a defect-enriched and dual heteroatom (S and N) doped hierarchically porous graphene-like carbon nanomaterial (D-S/N-GLC) was prepared by a simple and scalable strategy, and exhibits an outperformed ORR activity and stability as compared to commercial Pt/C catalyst in an alkaline condition (its half-wave potential is nearly 24 mV more positive than Pt/C). The excellent ORR performance of the catalyst can be attributed to the synergistic effect, which integrates the novel graphene-like architectures, 3D hierarchically porous structure, superhigh surface area, high content of active dopants, and abundant defective sites in D-S/N-GLC. As a result, the developed catalysts are used as the air electrode for primary and all-solid-state Zn-air batteries. The primary batteries demonstrate a higher peak power density of 252 mW cm^-2 and high voltage of 1.32 and 1.24 V at discharge current densities of 5 and 20 mA cm^-2, respectively. Remarkably, the all-solid-state battery also exhibits a high peak power density of 81 mW cm^-2 with good discharge performance. Moreover, such catalyst possesses a comparable ORR activity and higher stability than Pt/C in acidic condition. The present work not only provides a facile but cost-efficient strategy toward preparation of graphene-based materials, but also inspires an idea for promoting the electrocatalytic activity of carbon-based materials.

A Facile Synthesis of Nitrogen-Doped Highly Porous Carbon Nanoplatelets: Efficient Catalysts for Oxygen Electroreduction

The oxygen reduction reaction (ORR) is of great importance for various renewable energy conversion technologies such as fuel cells and metal-air batteries. Heteroatom-doped carbon nanomaterials have proven to be robust metal-free electrocatalysts for ORR in the above-mentioned energy devices. Herein, we demonstrate the synthesis of novel highly porous N-doped carbon nanoplatelets (N-HPCNPs) derived from oatmeal (or a biological material) and we show the materials’ high-efficiency as electrocatalyst for ORR. The obtained N-HPCNPs hybrid materials exhibit superior electrocatalytic activities towards ORR, besides excellent stability and good methanol tolerance in both basic and acidic electrolytes. The unique nanoarchitectures with rich micropores and mesopores, as well as the high surface area-to-volume ratios, present in the materials significantly increase the density of accessible catalytically active sites in them and facilitate the transport of electrons and electrolyte within the materials. Consequently, the N-HPCNPs catalysts hold a great potential to serve as low-cost and highly efficient cathode materials in direct methanol fuel cells (DMFCs).

Doping carbon nanotubes with N, S, and B for electrocatalytic oxygen reduction: a systematic investigation on single, double, and triple doped modes

Polydopamine-coated MWCNTs have been employed as reactive platforms for the anchoring of multiple heteroatom dopants.

Multiple active components, synergistically driven cobalt and nitrogen Co-doped porous carbon as high-performance oxygen reduction electrocatalyst

Economical g-C₃N₄derived Co,N dual-doped porous carbon with multiple active components shows high-performance oxygen reduction electrocatalytic activity.

Uniform and perfectly linear current–voltage characteristics of nitrogen-doped armchair graphene nanoribbons for nanowires

Edge nitrogen-doping induces uniform and perfectly linearI–Vcharacteristics in AGNRs for nanowire applications in molectronics.

Fe–N-doped carbon-based composite as an efficient and durable electrocatalyst for the oxygen reduction reaction

An Fe–N-doped carbon nanoparticle–carbon nanofiber (Fe–N-CNP–CNF) composite was prepared by a solution plasma process followed by heat treatment. The Fe–N-CNP–CNF exhibits excellent catalytic activity, durability and methanol tolerance for the ORR.