Facet-dependent haloperoxidase-like activities of CeO2 nanoparticles contribute to their excellent biofilm formation suppression abilities

Biofilms adhering to different surfaces have significant negative impacts in various fields. Cerium oxide nanoparticles can serve as mimics of haloperoxidase for biological biofilm inhibition applications. The regulation of the exposed facet of CeO2 nanoparticles influences their efficiency in various catalytic processes. However, there is still a lack of systematic studies on the facet-dependent haloperoxidase-like activity of CeO2. In the present study, the facet-dependent haloperoxidase activities and antibiofilm performance of CeO2 nanoparticles were elucidated through experiment analysis and density function theory calculation. The as-prepared CeO2 nanoparticles inhibited bacterial survival and catalyzed the oxidative bromination of quorum sensing signaling molecules, achieving biofilm inhibition performance. The antibacterial and biofilm formation suppression abilities were consistent with their haloperoxidase activities. The {111}- and {110}-facet CeO2 nanopolyhedra, as well as the {110}- and {100}-facet CeO2 nanorods, which had higher haloperoxidase activity showed better antibiofilm performance than the {100}-facet CeO2 cubes. The present findings provide a comprehensive understanding of the facet-dependent haloperoxidase-like activity of CeO2. Furthermore, engineering CeO2 morphologies with different crystal facets may represent a novel method for significantly adjusting their haloperoxidase-like activity.

A Path towards Timely VAP Diagnosis: Proof-of-Concept Study on Pyocyanin Sensing with Cu-Mg Doped Graphene Oxide

In response to the urgent requirement for rapid, precise, and cost-effective detection in intensive care units (ICUs) for ventilated patients, as well as the need to overcome the limitations of traditional detection methods, researchers have turned their attention towards advancing novel technologies. Among these, biosensors have emerged as a reliable platform for achieving accurate and early diagnoses. In this study, we explore the possibility of using Pyocyanin analysis for early detection of pathogens in ventilator-associated pneumonia (VAP) and lower respiratory tract infections in ventilated patients. To achieve this, we developed an electrochemical sensor utilizing a graphene oxide-copper oxide-doped MgO (GO - Cu - Mgo) (GCM) catalyst for Pyocyanin detection. Pyocyanin is a virulence factor in the phenazine group that is produced by Pseudomonas aeruginosa strains, leading to infections such as pneumonia, urinary tract infections, and cystic fibrosis. We additionally investigated the use of DNA aptamers for detecting Pyocyanin as a biomarker of Pseudomonas aeruginosa, a common causative agent of VAP. The results of this study indicated that electrochemical detection of Pyocyanin using a GCM catalyst shows promising potential for various applications, including clinical diagnostics and drug discovery.

Bioinspired Graphene Oxide-Magnetite Nanocomposite Coatings as Protective Superhydrophobic Antifouling Surfaces

Antifouling (AF) nanocoatings made of polydimethylsiloxane (PDMS) are more cost-efficient and eco-friendly substitutes for the already outlawed tributyltin-based coatings. Here, a catalytic hydrosilation approach was used to construct a design inspired by composite mosquito eyes from non-toxic PDMS nanocomposites filled with graphene oxide (GO) nanosheets decorated with magnetite nanospheres (GO-Fe₃O₄ nanospheres). Various GO-Fe₃O₄ hybrid nanofillers were dispersed into the PDMS resin through a solution casting method to evaluate the structure-property relationship. A simple coprecipitation procedure was used to fabricate magnetite nanospheres with an average diameter of 30-50 nm, a single crystal structure, and a predominant (311) lattice plane. The uniform bioinspired superhydrophobic PDMS/GO-Fe₃O₄ nanocomposite surface produced had a micro-/nano-roughness, low surface-free energy (SFE), and high fouling release (FR) efficiency. It exhibited several advantages including simplicity, ease of large-area fabrication, and a simultaneous offering of dual micro-/nano-scale structures simply via a one-step solution casting process for a wide variety of materials. The superhydrophobicity, SFE, and rough topology have been studied as surface properties of the unfilled silicone and the bioinspired PDMS/GO-Fe₃O₄ nanocomposites. The coatings' physical, mechanical, and anticorrosive features were also taken into account. Several microorganisms were employed to examine the fouling resistance of the coated specimens for 1 month. Good dispersion of GO-Fe₃O₄ hybrid fillers in the PDMS coating until 1 wt % achieved the highest water contact angle (158° ± 2°), the lowest SFE (12.06 mN/m), micro-/nano-roughness, and improved bulk mechanical and anticorrosion properties. The well-distributed PDMS/GO-Fe₃O₄ (1 wt % nanofillers) bioinspired nanocoating showed the least biodegradability against all the tested microorganisms [Kocuria rhizophila (2.047%), Pseudomonas aeruginosa (1.961%), and Candida albicans (1.924%)]. We successfully developed non-toxic, low-cost, and economical nanostructured superhydrophobic FR composite coatings for long-term ship hull coatings. This study may expand the applications of bio-inspired functional materials because for multiple AF, durability and hydrophobicity are both important features in several industrial applications.

A comparative study between two novel silicone/graphene-based nanostructured surfaces for maritime antifouling

Two novel superhydrophobic nanocomposite series of polydimethylsiloxane (PDMS) enriched with reduced graphene oxide (RGO) and graphene oxide/boehmite nanorods (GO-γ-AlOOH) nanofillers were synthesized as maritime fouling-release (FR) surfaces. Controlling the nanofillers' structures and distribution in the silicone matrix influenced the self-cleaning and antifouling properties. γ-AlOOH nanorods had a single crystallinity with an average diameter of 10-20 nm and < 200 nm length. A hydrothermal method was used to prepare RGO, while the chemical deposition method was used to synthesis GO-γ-AlOOH nanocomposites for use as fouling-release coating materials. For studying the synergetic effects of graphene-based materials on the surface, mechanical, and FR features, these nanofillers were dispersed in the silicone matrix using the solution casting method. The hydrophobicity and antifouling properties of the surface were studied using water contact angle (WCA), scanning electron, and atomic force microscopes (SEM and AFM). Coatings' roughness, superhydrophobicity, and surface mechanical properties all improved for the homogeneity of the dispersion of the nanocomposite. Laboratory assessments were carried out for 30 days using selected microorganisms to determine the antifouling effects of the coating systems. PDMS/GO-γ-AlOOH nanorod composite had better antibacterial activity than PDMS/RGO nanocomposite against different bacterial strains. This is caused by the high surface area and stabilizing effects of the GO-γ-AlOOH hybrid nanofillers. The PDMS/GO-γ-AlOOH nanorod composite (3 wt%) had the lowest biodegradability percentage (1.6%) and the microbial endurability percentages for gram-positive, gram-negative, and fungi were 86.42%, 97.94%, and 85.97%, respectively. A field trial in natural seawater was conducted to confirm the coatings' FR performance based on the screening process and image analysis for 45 days in a tropical area. The most profound superhydrophobic antifouling nanostructured coating was the homogeneity of the GO-γ-AlOOH (3 wt%) dispersion, which had a WCA of 151° and a rough surface.

Engineering nanoscale hierarchical morphologies and geometrical shapes for microbial inactivation in aqueous solution

Here, we study the effect of hierarchical and one-dimensional (1D) metal oxide nanorods (H-NRs) such as γ-Al₂O₃, β-MnO₂, and ZnO as microbial inhibitors on the antimicrobial efficiency in aqueous solution. These microbial inhibitors are fabricated in a diverse range of nanoscale hierarchical morphologies and geometrical shapes that have effective surface exposure, and well-defined 1D orientation. For instance, γ-Al₂O₃ H-NRs with 20 nm width and ˂0.5 μm length are grown dominantly in the [400] direction. The wurtzite structures of β-MnO₂ H-NRs with 30 nm width and 0.5-1 μm length are preferentially oriented in the [100] direction. Longitudinal H-NRs with a width of 40 nm and length of 1 μm are controlled with ZnO wurtzite structure and grown in [0001] direction. The antimicrobial efficiency of H-NRs was evaluated through experimental assays using a set of microorganisms (Gram-positive Staphylococcus aureus, Bacillus thuriginesis, and Bacillus subtilis) and Gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacteria. Minimal inhibitory and minimum bactericidal concentrations (MIC and MBC) were determined. These 1D H-NRs exhibited antibacterial activity against all the used strains. The active surface exposure sites of H-NRs play a key role in the strong interaction with the thiol units of vital bacterial enzymes, leading to microbial inactivation. Our finding indicates that the biological effect of the H-NR surface planes on microbial inhibition is decreased in the order of [400]-γ-Al₂O₃ > [100]-β-MnO₂ > [0001]-ZnO geometrics. The lowest key values including MIC (1.146 and 0.250 μg/mL), MBC (1.146, 0.313 μg/mL), and MIC/MFC (0.375 and 0.375 μg/mL) are achieved for [400]-plane γ-Al₂O₃ surfaces when tested against Gram-positive and -negative bacteria, respectively. Among the three H-NRs, the smallest diameter size and length, the largest surface area, and the active exposure [400] direction of γ-Al₂O₃ H-NRs could provide the highest microbial inactivation.

Progress in biomimetic leverages for marine antifouling using nanocomposite coatings

Because of the environmental and economic casualties of biofouling on maritime navigation, modern studies have been devoted toward formulating advanced nanoscale composites in the controlled development of effective marine antifouling self-cleaning surfaces.

Silicone/Ag@SiO2 core-shell nanocomposite as a self-cleaning antifouling coating material

The effects of Ag@SiO2 core-shell nanofiller dispersion and micro-nano binary structure on the self-cleaning and fouling release (FR) in the modelled silicone nano-paints were studied. An ultrahydrophobic polydimethylsiloxane/Ag@SiO2 core-shell nanocomposite was prepared as an antifouling coating material. Ag@SiO2 core-shell nanospheres with 60 nm average size and a preferential {111} growth direction were prepared via a facile solvothermal and a modified Stöber methods with a controlled shell thickness. Ag@SiO2 core-shell nanofillers were inserted in the silicone composite surface via solution casting technique. A simple hydrosilation curing mechanism was used to cure the surface coating. Different concentrations of nanofillers were incorporated in the PDMS matrix for studying the structure-property relationship. Water contact angle (WCA) and surface free energy determinations as well as atomic force microscopy and scanning electron microscope were used to investigate the surface self-cleaning properties of the nanocomposites. Mechanical and physical properties were assessed as durability parameters. A comparable study was carried out between silicone/spherical Ag@SiO2 core-shell nanocomposites and other commercial FR coatings. Selected micro-foulants were used for biological and antifouling assessments up to 28 days. Well-distributed Ag@SiO2 core-shell (0.5 wt%) exhibited the preferable self-cleaning with WCA of 156° and surface free energy of 11.15 mN m-1.

Linseed oil-based alkyd/Cu2O nanocomposite coatings for surface applications

An ecofriendly series of linseed oil based hyperbranched alkyd/Cu₂O-nanocube composites was developed as a modern stream for surface coating applications.

Sunflower oil-based hyperbranched alkyd/spherical ZnO nanocomposite modeling for mechanical and anticorrosive applications

Approaches for designing advanced nanomaterials with hyperbranched architectures and lack of volatile organic content (VOC) have attracted considerable attention.

Data on photo-nanofiller models for self-cleaning foul release coating of ship hulls

The data presented in this article are related to the research article entitled “Smart photo-induced silicone/TiO₂ nanocomposites with dominant [110] exposed surfaces for self-cleaning foul-release coatings of ship hulls” (Selimet al., 2016) [1]. This article reports on successfully designing and controlling TiO₂ spherical single crystal photo-nanofillers and indicating evidence of fouling resistance after stimulation through UV radiation exposure. These data also reveal that the influence of well-dispersed spherical TiO₂ nanoparticles (NPs) into the polymer matrix surface features on the prepared fouling release (FR) coating. Single crystal TiO₂ nanospheres have played a large role in the scenario of photocatalysis due to its cost effectiveness, inert nature and photo stability. The model output and the surface and mechanical behavior data of the fabricated UV-irradiated silicone-based FR nanocoatings are made publicly available through analyzing nanocomposite topology, superhydrophilicity and self-cleaning efficiency in order to enable critical analysis of the tailored model. It also investigates the photo-bactericidal effect confirmed through biofilm coverage data disability. The modeled nanocomposites were subjected to comparable studies with other published models so as to understand how different UV-irradiated nano-scale parameters propagate and affect bulk film response.

Modeling of spherical silver nanoparticles in silicone-based nanocomposites for marine antifouling

A non-toxic foul-release model of silicone/spherical AgNP hybrid nanocomposites with enhanced hydrophobicity, self-cleaning, and marine fouling release performance.