Development of Response Surface Approach for Determination of Paracetamol, Chlorpheniramine Maleate, Caffeine and Ascorbic Acid by Green HPLC Method: A Desirability-Based Optimization

Design of experiment is an efficient and cost-effective tool to optimize the chromatographic separation of a multicomponent mixture. The central composite design was conducted to develop and optimize a green high performance liquid chromatography (HPLC) method for simultaneous quantitation of a quaternary mixture of paracetamol, chlorpheniramine maleate, caffeine and ascorbic acid in their pharmaceutical dosage form as well as the determination of their dissolution profile. A five-level three-factor model was performed to investigate the effect of mobile phase composition, pH and flow rate on enhanced resolution and short run time. Analysis was performed using a Kinitex EVO C18 column and a mobile phase composed of methanol: 0.02 M phosphate buffer pH 3.3 (34:66, v/v) at 1.0 mL/min using photodiode array detection. Optimum chromatographic separation was achieved in <6 min with a desirability of 0.999. Linearity was achieved over a range of 1.00-300.00, 1.00-50.00, 2.00-50.00 and 2.00-100.00 μg/mL for paracetamol, chlorpheniramine maleate, caffeine and ascorbic acid, respectively, with a limit of detection (<0.1 μg/mL). The greenness profile was evaluated using the analytical eco-scale and Analytical GREEnness Metric Approach with values of 81 and 0.77, respectively.

Univariate versus multivariate spectrophotometric data analysis of triamterene and xipamide; a quantitative and qualitative greenly profiled comparative study

Triamterene (TRI) and xipamide (XIP) mixture is used as a binary medication of antihypertension which is considered as a major cause of premature death worldwide. The purpose of this research is the quantitative and qualitative analysis of this binary mixture by green univariate and multivariate spectrophotometric methods. Univariate methods were zero order absorption spectra method (D⁰) and Fourier self-deconvolution (FSD), as TRI was directly determined by D⁰ at 367.0 nm in the range (2.00-10.00 µg/mL), where XIP show no interference. While XIP was determined by FSD at 261.0 nm in the range (2.00-8.00 µg/mL), where TRI show zero crossing. Multivariate methods were Partial Least Squares, Principal Component Regression, Artificial Neural Networks, and Multivariate Curve Resolution-Alternating Least Squares. A training set of 25 mixtures with different quantities of the tested components was used to construct and evaluate them, 3 latent variables were displayed using an experimental design. A set of 18 synthetic mixtures with concentrations ranging from (3.00-7.00 µg/mL) for TRI and (2.00-6.00 µg/mL) for XIP, were used to construct the calibration models. A collection of seven synthetic mixtures with various quantities was applied to build the validation models. All the proposed approaches quantitative analyses were evaluated using recoveries as a percentage, root mean square error of prediction, and standard error of prediction. Strong multivariate statistical tools were presented by these models, and they were used to analyze the combined dosage form available on the Egyptian market. The proposed techniques were evaluated in accordance with ICH recommendations, where they are capable of overcoming challenges including spectral overlaps and collinearity. When the suggested approaches and the published one were statistically compared, there was no discernible difference between them. The green analytical method index and eco-scale tools were applied for assessment of the established models greenness. The suggested techniques can be used in product testing laboratories for standard pharmaceutical analysis of the substances being studied.

Simultaneous determination of hydrochlorothiazide, amlodipine, and telmisartan with spectrophotometric and HPLC green chemistry applications

For the quantifiable amounts of Telmisartan (TLM) and Hydrochlorothiazide (HYD) in the presence of Amlodipine (AML) in a ternary mixture of synthetic laboratory mixture, a novel, sensitive, quick, and practical reversed-phase high-performance liquid chromatography (RP-HPLC) method was given. In order to separate, a Waters Spherisorb ODS-2 C18 column was used. For HYD, TLM, and AML, these techniques were viable over linearity ranges of 4-12 μg/mL, 4-25 μg/mL, and 5-40 μg/mL, respectively. The mobile phase system was acetonitrile:methanol: phosphate buffer at pH 2.5 (65:5:30 v/v/v), and the flow rate was 1.5 mL/min. Novel spectrophotometric methods were applied for active substances to determine simultaneously. The first method is absorptivity centering using factorized spectrum, and the second method is dual amplitude difference coupled with absorbance subtraction. These approaches have been effectively applied to bulk, laboratory synthetic mixtures to employ active components quantitatively. Correlation coefficients were found to be higher than 0.99 and the limit of detection values lower than 0.49 μg/mL in both spectrophotometric methods. The methodologies were validated following ICH recommendations. In the developed HPLC method, the limit of detection values was found to be 0.01 μg/mL for HYD and 0.02 μg/mL for AML and TLM. The correlation coefficients for the HPLC method were found to be 0.9971 for HYD, 0.9990 for AML, and 0.9983 for TLM. The suggested HPLC technique is a simple, effective, sensitive, environmentally friendly, and time-saving approach for determining TLM and HYD in the presence of AML.

Analytical Eco-Scale for Evaluating the Uniqueness of Voltammetric Method used for Determination of Antiemetic Binary Mixture Containing Doxylamine Succinate in Presence of its Toxic Metabolite

Green analytical procedures are gaining popularity in the pharmaceutical research area as a way to reduce environmental impact and improve analyst health safety. The current work presents a green and sensitive electrochemical carbon paste electrode that has been chemically modified with zirconium dioxide and multi-walled carbon nanotubes for estimation of pyridoxine HCl (PYR) and doxylamine succinate (DOX) using the square wave voltammetric technique. Under optimum conditions, the linearity ranges were 20.00–2000.00 ng mL−1 and 2.00–20.00 µg mL−1 for both drugs in the 1st linear segment and 2nd linear segment, respectively. Stability testing assesses how the quality of a drug substance changes over time, depending on environmental and laboratory factors. DOX was found to undergo oxidative degradation when refluxed for 7 h using 30% H2O2 and the degraded product (DOX DEG) (toxic metabolite) was successfully characterized utilizing LC–MS. The developed electrode showed selectivity for the determination of binary mixture in pure form, pharmaceutical form, and in the presence of DOX DEG and common interfering molecules with good recovery. The proposed method was found to be eco-friendlier than the reported method in terms of the use of hazardous chemicals and solvents, energy consumption, and waste generation.

Graphical Abstract

Greenness Assessment of Two Validated Stability Indicating Chromatographic Methods for Estimating Modafinil Using Analytical Eco-Scale

BACKGROUND

Modafinil (MDF) is one of the drugs that used for the treatment of narcolepsy.

OBJECTIVE

This manuscript involves the development and validation of two chromatographic stability indicating methods for MDF in the presence of its acid induced degradation.

METHODS

Modafinil was degraded under different stress conditions and identification of the degradation product was performed using infrared and mass spectroscopy. The first method was thin layer chromatography where aluminum backed silica gel 60F254 plates were used and the developing system was dichloromethane- methanol (9:1, v/v). While the second method was an eco- friendly (HPLC) that utilized C-18 column and ethanol- H2O (30:70, v/v) as a mobile phase at flow rate 1 mL/min and UV detection at 220 nm.

RESULTS

Good linear relationships were obtained within ranges of (1-10 µg/band) and (2-10 µg/mL) for TLC-densitometry and HPLC, respectively. The obtained results were statistically compared with those of the official HPLC method and showed no significant difference with respect to their accuracy and precision at p = 0.05. Greenness scores represent excellent green analysis in comparison with the reported studies.

CONCLUSIONS

The proposed methods were validated according to ICH guidelines and were applied on bulk powder and pharmaceutical dosage form using eco-friendly mobile phases as the worldwide trend.

HIGHLIGHTS

Chromatographic methods have been validated for estimation of MDF in the presence of its degradation product. Clarification of degradation pathway and the elucidation of the structure were stated for the first time. It's the first published method using greenness assessment metrics for the analysis of MDF.

Application and validation of superior spectrophotometric methods for simultaneous determination of ternary mixture used for hypertension management

Telmisartan (TL), Hydrochlorothiazide (HZ) and Amlodipine besylate (AM) are co-formulated together for hypertension management. Three smart, specific and precise spectrophotometric methods were applied and validated for simultaneous determination of the three cited drugs. Method A is the ratio isoabsorptive point and ratio difference in subtracted spectra (RIDSS) which is based on dividing the ternary mixture of the studied drugs by the spectrum of AM to get the division spectrum, from which concentration of AM can be obtained by measuring the amplitude values in the plateau region at 360nm. Then the amplitude value of the plateau region was subtracted from the division spectrum and HZ concentration was obtained by measuring the difference in amplitude values at 278.5 and 306nm (corresponding to zero difference of TL) while the total concentration of HZ and TL in the mixture was measured at their isoabsorptive point in the division spectrum at 278.5nm (Aiso). TL concentration is then obtained by subtraction. Method B; double divisor ratio spectra derivative spectrophotometry (RS-DS) and method C; mean centering of ratio spectra (MCR) spectrophotometric methods. The proposed methods did not require any initial separation steps prior the analysis of the three drugs. A comparative study was done between the three methods regarding their; simplicity, sensitivity and limitations. Specificity was investigated by analyzing the synthetic mixtures containing different ratios of the three studied drugs and their tablets dosage form. Statistical comparison of the obtained results with those found by the official methods was done, differences were non-significant in regard to accuracy and precision. The three methods were validated in accordance with ICH guidelines and can be used for quality control laboratories for TL, HZ and AM.