A Turn-On Fluorescent Chemosensor for Cyanide Ion Detection in Real Water Samples

We have designed and synthesized a novel simple colorimetric fluorescent probe with aggregation-induced emission (AIE) properties. Probe 5-(4-(diphenylamine)phenyl) thiophen-2-formaldehyde W exhibited a turn-on fluorescent response to cyanide ion (CN−), which induces distinct visual color changes. Probe W exhibited a highly selective and sensitive ratiometric fluorescence response for the detection of CN− over a wide pH range (4–11) and in the presence of common interferents. The linear detection of CN− over the concentration range of 4.00–38.00 µM (R2 = 0.9916, RSD = 0.02) was monitored by UV-Vis absorption spectrometry (UV-Vis) with the limit of detection determined to be 0.48 µM. The linear detection of CN− over the concentration range of 8.00–38.00 µM was examined by fluorescence spectrophotometry (R2 = 0.99086, RSD = 0.031), and the detection limit was found to be 68.00 nM. The sensing mechanisms were confirmed by 1H NMR spectroscopic titrations, X-ray crystallographic analysis, and HRMS. Importantly, probe W was found to show rapid response, high selectivity, and sensitivity for cyanide anions in real water samples, over the range of 100.17∼100.86% in artificial lake water and 100.54∼101.64% in running water by UV-Vis absorption spectrometry, and over the range of 99.42∼100.71% in artificial lake water and 100.59∼101.17% in running water by fluorescence spectrophotometry. Importantly, this work provides a simple and effective approach which uses an economically cheap and uncomplicated synthetic route for the selective, sensitive, and quantitative detection of CN− ions in systems relevant to the environment and health.

Adsorption and photocatalytic activity of biosynthesised ZnO nanoparticles using Aloe Vera leaf extract

In this article, we demonstrates the growth of phase pure ZnO nanostructures from Aloe-Vera leaf extract and degradation of an organic dye-Malachite Green (MG)- from aqueous medium using the same as catalyst. Adsorption mechanisms were evaluated using Lagergren’s pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models. X-Ray diffraction data showed that the synthesised ZnO is crystalline with hexagonal wurtzite phase. Average crystallite size and lattice strain was estimated from Scherrer equation and Williamson-Hall analysis with the help of Rietveld refinement data. Crystallite size obtained from Scherrer method is 12.62 nm while that from Williamson-Hall analysis is 19.27 nm. Uniform growth of ZnO nano-sheets were confirmed by FE-SEM analysis. Optical characterisation was carried by UV-Visible spectroscopy and the band gap ZnO nanoparticles was found to be 3.19 eV. Zn-O stretching vibrations were recorded at 550 cm−1 using FTIR spectrophotometer. Results showed that biosynthesised ZnO nanosheets are particularly effective for the degradation of MG dye.

A fluorescent supramolecular gel and its application in the ultrasensitive detection of CN- by anion-π interactions

Supramolecular gels have been widely reported on account of their unique superiority and application prospects. In this work, we constructed a novel supramolecular gel (HD-G) by using hydroxy-naphthaldehyde decorated with naphthalimide in DMSO solution, which exhibited excellent selectivity and ultrasensitive sensing properties toward CN^- (the lowest detection limit is 1.82 × 10^-10 M). The sensing mechanism of this supramolecular gel takes advantage of π-π stacking interactions and anion-π interactions, which is different from the other familiar methods.

A new phenothiazine-based selective visual and fluorescent sensor for cyanide

A new donor-π-acceptor derived from phenothiazine, namely 2-(2-((10-hexyl-10H-phenothiazin-3-yl)methylene)-3-oxo-2,3-dihydroinden-1-ylidene) malononitrile (PTZON) was synthesized and fully characterized, and its potential as a fluorescent sensor for cyanide anion was investigated. The PTZON showed a visible absorption band at 564 nm corresponds to an intramolecular charge transfer (ICT) and an emission band at 589 nm in CH₃CN/H₂O. The results of cyanide anion titration revealed ratiometric changes in both absorption and fluorescence spectra as a result of the nucleophilic addition of cyanide anion via Michael addition. The optical studies, FT-IR spectra, NMR, high-resolution mass, and DFT calculations confirmed the sensing mechanism. The selectivity of PTZON as a cyanide anion fluorescent sensor was proved in mixed solvent solutions, and the sensitivity was as low as 0.011 µM, which is far lower than the value allowed by the United States Environmental Protection Agency for drinking water (1.9 µM). Also, the detection limit of PTZON was assessed to be 3.39 μM by the spectrophotometric method. The binding stoichiometry between PTZON and cyanide anion was found to be 1:1 as evidenced by mass spectra. TLC silica-coated plates test strips demonstrated the fluorescent detection of cyanide anion.

Sensitive colorimetric detection of CN− and AcO− anions in a semi-aqueous environment through a coumarin–naphthalene conjugate azo dye

An efficient colorimetric chemosensor to detect anions in an aqueous medium.

A water-soluble fluorescent chemosensor based on Asp functionalized naphthalimide for successive detection Fe3+ and H2PO4−

The selective recognition of target ions in water is very important and the development of novel water-soluble chemosensor is still an intriguing challenge. Herein, a novel water-soluble fluorescent sensor based on aspartic acid (Asp) functionalized 1,8-naphthalimide derivative (Asp-NI) has been designed and synthesized. The sensor Asp-NI could dissolve in water and successively detect Fe3+ and H2PO4− in water solution with high selectivity and sensitivity. The detection limits are 4.97 × 10−7 mol/L for Fe3+ and 5.27 × 10−6 mol/L for H2PO4−. Other coexistent competitive metal ions (Hg2+, Ag+, Ca2+, Cu2+, Co2+, Ni2+, Cd2+, Pb2+, Zn2+, Cr3+, and Mg2+) showed no interference in the Fe3+ detection process. The sensor Asp-NI could act as a Fe3+ and H2PO4− controlled “On–Off–On” fluorescent switch. More interestingly, the Fe3+ induced fluorescence quenching process could be totally reversed by the addition of H2PO4−, this “On–Off–On” switching process could be repeated several times with little fluorescence loss. Notably, the actual usage of sensor Asp-NI was further demonstrated by test kits.

A one-step synthesized acridine-based fluorescent chemosensor for selective detection of copper(ii) ions and living cell imaging

A highly selective and sensitive fluorescence quenching chemosensor (ACC) for Cu²⁺ detection in HEPES buffer and living cell imaging was developed.

Two benzoyl coumarin amide fluorescence chemosensors for cyanide anions

Two new benzoyl coumarin amide derivatives with ortho hydroxyl benzoyl as terminal group have been synthesized. Their photophysical properties and recognition properties for cyanide anions in acetonitrile have also been examined. The influence of electron donating diethylamino group in coumarin ring and hydroxyl in benzoyl group on recognition properties was explored. The results indicate that the compounds can recognize cyanide anions with obvious absorption and fluorescence spectral change and high sensitivity. The import of diethylamine group increases smartly the absorption ability and fluorescence intensity of the compound, which allows the recognition for cyanide anions can be observed by naked eyes. The in situ hydrogen nuclear magnetic resonance spectra combining photophysical properties change and job's plot data confirm that Michael addition between the chemosensors and cyanide anions occurs. Molecular conjugation is interrupted, which leads to fluorescence quenching. At the same time, there is a certain extent hydrogen bond reaction between cyanide and hydroxyl group in the compounds, which is beneficial to the recognition.

Spectral studies on anthracene based dual sensor for Hg2+ and Al3+ ions with two distinct output modes of detection

A simple and easily synthesized colorimetric and fluorescent chemosensor 1, based on aromatic OH and imine moieties as a binding and anthracene as signaling unit, has been synthesized in a one-step procedure. The chemosensor 1 is developed as a dual chemosensor for detection of Hg²⁺ and Al³⁺ ions in CH₃OH, which exhibited a color change from light yellow to dark yellow with Hg²⁺ ions, enabling 1 a suitable "bare eye" indicator for Hg²⁺ ions. On the other hand, fluorescent enhancement with blue shift along with brilliant cyan fluorescence was observed upon binding with Al³⁺ ions. A possible sensing mechanism has been proposed by means of Job's plot and ¹H NMR titration.

3-Hydroxyflavone derivatives synthesized by a new simple method as chemosensors for cyanide anions

Two 3-hydroxyflavone derivatives as chemosensors for cyanide were synthesized by one step simple condensation, cyclization and subsequent oxidation reaction catalyzed by pyrrolidine, which shows great convenience compared with traditional method.

Promising ESIPT-based fluorescence sensor for Cu2+ and CN− ions: investigation towards logic gate behaviour, anticancer activities and bioimaging application

An excited state intramolecular proton transfer (ESIPT) process-based novel chromogenic and fluorogenic probe (2) was synthesized with the aim of sequential in situ detection of Cu²⁺ and CN⁻ ions under aqueous and biological conditions.

Off–on fluorometric detection of cyanide anions in an aqueous mixture by an indane-based receptor

An indanedione–coumarin conjugate behaves as an off–on type fluorescent receptor for rapid, selective, and sensitive detection of cyanide anions in an aqueous mixture via a nucleophilic interaction with the electrophilic β-carbon of the receptor.

Curcumin based chemosensor for selective detection of fluoride and cyanide anions in aqueous media

The conjugate N,N-dimethyl curcumin analogue fluorophore dye 1 has been synthesized and its performance as a sensor was demonstrated.

Novel functionalized pillar[5]arene: synthesis, assembly and application in sequential fluorescent sensing for Fe3+ and F− in aqueous media

The synthesis, assembly and applications of novel functionalized pillar[5]arene in the sequential fluorescent sensing of Fe³⁺ and F⁻ in aqueous media is reported.

A simple chemosensor for the dual-channel detection of cyanide in water with high selectivity and sensitivity

By a deprotonated mechanism, the simple chemosensorHYshowed high sensitivity and selectivity for cyanide in aqueous media.