Preparation of Ti/SnO2-Sb2O4-La Electrode with TiO2 Nanotubes Intermediate Layer and the Electrochemical Oxidation Performance of Rhodamine B

A La-doped Ti/SnO2-Sb2O4 electrode with TiO2-NTs intermediate layer (Ti/TiO2-NTs/SnO2-Sb2O4-La) was created via the electrodeposition technique. The physicochemical and electrochemical properties of the electrode were analyzed through FESEM, XRD, XPS, CV, and LSV electrochemical tests. The results showed that TiO2-NTs were tightly packed on the surface of Ti substrate, thus improving the binding force of the SnO2-Sb2O4-La coating, offering greater specific surface area, more active spots, higher current response, and longer lifespan for the degradation of rhodamine B. The lifespan of the Ti/TiO2-NTs/SnO2-Sb2O4-La electrode reached 200 min (1000 mA cm-2, 1 M H2SO4), while the actual service life was up to 3699 h. Under the conditions of initial pH 3.0, Na2SO4 concentration of 0.1 M, current density of 30 mA cm-2, and initial rhodamine B concentration of 20 mg L-1, the color and TOC removal rate of rhodamine B reached 100% and 86.13% within 15 and 30 min, respectively. Rhodamine B was decomposed into acids, esters, and other molecular compounds under the action of •OH and SO4•- free radicals and electrocatalysis, and finally completely mineralized into CO2 and H2O. It is anticipated that this work will yield a novel research concept for producing DSA electrodes with superior catalytic efficacy and elevated stability.

Superior photo-Fenton degradation of acetamiprid by α- Fe2O3-pillared bentonite/L-cysteine complex: Synergy of L-cysteine and visible light

Acetamiprid is a potential threat to human health, aquatic life, soil microorganisms and beneficial insects as a recalcitrant pollutant in wastewater treatment plant effluents. In this work, the synthesized α-Fe2O3-pillared bentonite (FPB) was used to degrade acetamiprid in the photo-Fenton process with the assistance of L-cysteine (L-cys) existing in natural aquatic environment. The kinetic constant k of acetamiprid degradation by FPB/L-cys in the photo-Fenton process was far more than that in the Fenton process of FPB/L-cys lacking light and the photo-Fenton process of FPB without L-cys. The positive linear correlation between k and ≡Fe(II) content indicated the synergy of L-cys and visible light accelerated the cycle of Fe(III) to Fe(II) in FPB/L-cys during the degradation of acetamiprid by elevating the visible light response of FPB, and promoting the interfacial electron transfer from the active sites of FPB to hydrogen peroxide and photo-generated electron transfer from conduction band of α-Fe2O3 to the active sites of FPB. The boosting •OH and 1O2 were predominantly responsible for acetamiprid degradation. Acetamiprid could be efficiently degraded into less toxic small molecules in the photo-Fenton process via C-N bond breaking, hydroxylation, demethylation, ketonization, dechlorination, and ring cleavage.

Atomically-thin Schottky-like photo-electrocatalytic cross-flow membrane reactors for ultrafast remediation of persistent organic pollutants

The remediation of persistent organic pollutants in surface and ground water represents a major environmental challenge worldwide. Conventional physico-chemical techniques do not efficiently remove such persistent organic pollutants and new remediation techniques are therefore required. Photo-electro catalytic membranes represent an emerging solution that can combine photocatalytic and electrocatalytic degradation of contaminants along with molecular sieving. Herein, macro-porous photo-electro catalytic membranes were prepared using conductive and porous stainless steel metal membranes decorated with nano coatings of semiconductor photocatalytic metal oxides (TiO₂ and ZnO) via atomic layer deposition, producing highly conformal and stable coatings. The metal - semiconductor junction between the stainless steel membranes and photocatalysts provides Schottky - like characteristics to the coated membranes. The PEC membranes showed induced hydrophilicity from the nano-coatings and enhanced electro-chemical properties due to the Schottky junction. A high electron transfer rate was also induced in the coated membranes as the photocurrent efficiency increased by 4 times. The photo-electrocatalytic efficiency of the TiO₂ and ZnO coated membranes were demonstrated in batch and cross flow filtration reactors for the degradation of persistent organic pollutant solution, offering increased degradation kinetic factors by 2.9 and 2.3 compared to photocatalysis and electrocatalysis, respectively. The recombination of photo-induced electron and hole pairs is mitigated during the photo-electrocatalytic process, resulting in an enhanced catalytic performance. The strategy offers outstanding perspectives to design stimuli-responsive membrane materials able to sieve and degrade simultaneously toxic contaminants towards greater process integration and self-cleaning operations.

Enhanced electrochemical oxidation of phenol by boron-doped diamond nanowire electrode

We fabricated a boron-doped diamond nanowire (BDDNW) electrode via metal-assisted chemical etching (MACE) of Si and electrostatic self-assembly of nanodiamond (ESAND) seeding to provide a large surface area during the phenol oxidation.

Fe3O4@PEG-SO3H rod-like morphology along with the spherical nanoparticles: novel green nanocomposite design, preparation, characterization and catalytic application

A new heterogeneous nanocatalyst was successfully synthesized, completely characterized and efficiently applied in the synthesis of dihydropyrimidines.