Continuous-Flow Synthesis of Primary Vinylarenes via Inline Grignard Reagent Formation and Peterson Olefination

Primary vinylarenes are important monomers for the production of materials, which in our case are ion exchange membranes for electrolyzers. Given the high cost of certain vinylarenes but the relative affordability of their aldehyde precursors, we explored their synthesis using flow chemistry to enable facile and safe scale-up. While a soluble, methanolic Wittig reaction found limited success, an alternative approach involving Peterson olefination was high-yielding. This required (trimethylsilyl)methyl Grignard reagent, which was generated in flow using a magnesium-filled column. Thus, 2-vinylthiophene was obtained in 93% yield at 37 g scale, and the route was applicable to other nonpolar arenes. For polar arenes, precipitation at the oxymagnesium chloride stage and inefficient elimination were observed, but these challenges could be mitigated by employing (phenyldimethylsilyl)methyl Grignard reagent instead and stronger acid at a higher temperature for the elimination.

Imidazole-based artificial synapses for neuromorphic computing: a cluster-type conductive filament via controllable nanocluster nucleation

Memristive synapses based on conductive bridging RAMs (CBRAMs) utilize a switching layer having low binding energy with active metals for excellent analog conductance modulation, but the resulting unstable conductive filaments cause fluctuation and drift of the conductance. This tunability-stability dilemma makes it difficult to implement practical neuromorphic computing. A novel method is proposed to enhance the stability and controllability of conductive filaments by introducing imidazole groups that boost the nucleation of Cu nanoclusters in the ultrathin polymer switching layer through the initiated chemical vapor deposition (iCVD) process. It is confirmed that conductive filaments based on nanoclusters with specific gaps are generated in the copolymer medium using this method. Furthermore, by modulating the tunneling gaps, an ultra-wide conductance range of analog tunable conductive filaments is achieved from several hundreds of nS to a few mS with a sub-1 V driving voltage. Through this, both reliable and stable analog switching are achieved with low cycle-to-cycle and device-to-device weight update variations and separable state retention with 32 states. This approach paves the way for the extension of state availability in synaptic devices to overcome the tunability-stability dilemma, which is essential for the synaptic elements in neuromorphic systems.

Preventing Vanishing Gradient Problem of Hardware Neuromorphic System by Implementing Imidazole-Based Memristive ReLU Activation Neuron

With advances in artificial intelligent services, brain-inspired neuromorphic systems with synaptic devices are recently attracting significant interest to circumvent the von Neumann bottleneck. However, the increasing trend of deep neural network parameters causes huge power consumption and large area overhead of a nonlinear neuron electronic circuit, and it incurs a vanishing gradient problem. Here, a memristor-based compact and energy-efficient neuron device is presented to implement a rectifying linear unit (ReLU) activation function. To emulate the volatile and gradual switching of the ReLU function, a copolymer memristor with a hybrid structure is proposed using a copolymer/inorganic bilayer. The functional copolymer film developed by introducing imidazole functional groups enables the formation of nanocluster-type pseudo-conductive filaments by boosting the nucleation of Cu nanoclusters, causing gradual switching. The ReLU neuron device is successfully demonstrated by integrating the memristor with amorphous InGaZnO thin-film transistors, and achieves 0.5 pJ of energy consumption based on sub-10 µA operation current and high-speed switching of 650 ns. Furthermore, device-to-system-level simulation using neuron devices on the MNIST dataset demonstrates that the vanishing gradient problem is effectively resolved by five-layer deep neural networks. The proposed neuron device will enable the implementation of high-density and energy-efficient hardware neuromorphic systems.

Polypropylene Graft Poly(methyl methacrylate) Graft Poly(N-vinylimidazole) as a Smart Material for pH-Controlled Drug Delivery

Surface modification of polypropylene (PP) films was achieved using gamma-irradiation-induced grafting to provide an adequate surface capable of carrying glycopeptide antibiotics. The copolymer was obtained following a versatile two-step route; pristine PP was exposed to gamma rays and grafted with methyl methacrylate (MMA), and afterward, the film was grafted with N-vinylimidazole (NVI) by simultaneous irradiation. Characterization included Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and physicochemical analysis of swelling and contact angle. The new material (PP-g-MMA)-g-NVI was loaded with vancomycin to quantify the release by UV-vis spectrophotometry at different pH. The surface of (PP-g-MMA)-g-NVI exhibited pH-responsiveness and moderate hydrophilicity, which are suitable properties for controlled drug release.

Preparation of Quantum Dot-Embedded Photonic Crystal Hydrogel and Its Application as Fluorescence Sensor for the Detection of Nitrite

The development of fluorescence sensing platforms with excellent photoluminescence capabilities is of great importance for their further application. In this work, a photonic crystal structure was successfully applied to enhance the luminescence performance of fluorescent hydrogel, and the application of the obtained hydrogel as a fluorescence sensor was explored. A polystyrene photonic crystal template was constructed via vertical deposition self-assembly; then, the precursor solution containing polyethylenimine-capped CdS quantum dots (PEI-CdS QDs) and monomers filled in the gap of the template. After the polymerization process, the desired hydrogel was obtained. PEI-CdS QDs endowed the hydrogel with its fluorescence property, while interestingly, the photonic crystal structure showed a significant enhancement effect on the fluorescence-emission capability. The mechanism of this phenomenon was revealed. Moreover, this hydrogel could be used as a reusable fluorescence sensor for the detection of nitrite in water with good selectivity. The limit of detection was determined to be 0.25 μmol/L, which is much lower than the maximum limit for nitrite in drinking water.

Polyethylenimine-Capped CdS Quantum Dots for Sensitive and Selective Detection of Nitrite in Vegetables and Water

In the present work, polyethylenimine-capped CdS quantum dots (PEI-CdS QDs) with bright green fluorescence were synthesized and applied for sensitively and selectively detecting the nitrite in vegetable and water samples. Highly fluorescent and environment-friendly PEI-CdS QDs (quantum yield about 8%) with diameters of ca. 5 nm were easily synthesized by using hyperbranched PEI as functional polymer. Formation of the PEI-CdS QDs was verified by transmission electron microscopy and UV-vis spectroscopy. The fluorescence intensity of the as-synthesized PEI-CdS QDs was enhanced pronouncedly by the increasing amount of PEI and was stable when the pH ranged from 5.0 to 9.0. Our results demonstrated that the fluorescence of the PEI-CdS QDs was effectively quenched by the nitrite in a rather wide linear range of 1.0 × 10^-7-1.0 × 10^-4 M while efficiently avoiding the interferences from nitrate ions and other commonly coexisting anions of nitrite in the vegetable samples. The detection limit of the present method was lower than the maximum limit of nitrite in drinking water (6.5 × 10^-5 M) ruled by the World Health Organization, which is significant to the application of the method.

Enhanced catalysis of ultrasmall Au-MoS2 clusters against reactive oxygen species for radiation protection

Ionizing radiation produces excessive reactive oxygen species (ROS) which impose detrimental effects on biological systems. Thus, it is important to explore clinically safe and efficacious radioprotection agents to scavenge ROS and reduce the risks of radiotherapy. Recently, emerging catalytic nanomaterials such as sulfide nanomaterials have shown capability of clearing ROS in vivo by unique electron transfers between atoms, but their catalytic activities are yet suboptimal. As such, there is an unmet need to improve catalytic properties for stronger antioxidant activities and radiation protection. Herein, we prepared ultrasmall Au-MoS₂ clusters (∼2.5 nm) and they showed enhanced catalytic properties via gold intercalation facilitating increased active sites and synergistic effects. Electrocatalysis results revealed that the catalytic activity of Au-MoS₂ towards H₂O₂ was superior to ultrasmall MoS₂ without Au. As a result, we found that improving the electrocatalytic property of Au-MoS₂ can effectively enhance corresponding antioxidant activities and radioprotection effects in vivo. In addition, Au-MoS₂ also showed significant radioprotection in vitro and dramatically reduced the excess of radiation-induced adverse ROS. It also rescued radiation-induced DNA damages and protected the bone marrow hematopoietic system from ionizing radiation.

Nitrogen and sulfur Co-doped microporous activated carbon macro-spheres for CO2 capture

Millimeter-sized nitrogen and sulfur co-doped microporous activated carbon spheres (NSCSs) were first synthesized from poly(styrene-vinylimidazole-divinylbenzene) resin spheres through concentrated H₂SO₄ sulfonation, carbonization and KOH activation. Styrene (ST) and N-vinylimidazole (VIM) were carbon and nitrogen sources, while the sulfonic acid functional groups introduced by the simple concentrated sulfuric acid sulfonation worked simultaneously as cross-linking agent and sulfur source during the following thermal treatments. It was found that the surface chemistries, textural structures, and CO₂ adsorption performances of the NSCSs were significantly affected by the addition of VIM. The NSCS-4-700 sample with a molar ratio of ST: VIM = 1: 0.75 showed the best CO₂ uptake at different temperatures and pressures. An exhaustive adsorption evaluation indicated that CO₂ sorption at low pressures originated from the synergistic effect of surface chemistry and micropores below 8.04 Å, while at the moderate pressure of 8.0 bar, CO₂ uptake was dominated by the volume of micropores. The thermodynamics suggested the exothermic and orderly nature of the adsorption process, which was dominated by a physisorption mechanism. The high CO₂ adsorption capacity, fast kinetic adsorption rate, and great regeneration stability of the nitrogen and sulfur co-doped activated carbon spheres indicated that the as-prepared carbon adsorbents were good candidates for large-scale CO₂ capture.

One-step solvothermal synthesis of high-emissive amphiphilic carbon dots via rigidity derivation

In nanoscience, amphiphilic carbon dots (ACDs) are of great importance due to their excellent transferability for application in biological sensing, imaging and labelling. However, facile synthetic strategies are still limited, especially for obtaining high-emissive ACDs. Since the development of a high-emissive feature is strongly desired for improving the practical resolution in vivo, here we report a chemical strategy that uses rigid molecules to straightforwardly construct amphiphilic carbon dots (ACDs) with high luminescence quantum yields (QYs). By using 1-[bis(dimethylamino)methylene]-1H-1,2,3-triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate (HATU), a typical coplanar compound, as the only precursor, well-defined ACDs were prepared via a one-step solvothermal process which exhibited a superior QY of up to 29%, largely superior to those prepared from precursors with less rigid structures. The effect can be mainly attributed to a significant suppression of the competition of non-radiative decay through rigidity derivation. Metal ionic doping during the synthesis resulted in a further improvement of the crystallinity and monodispersity of the materials, with retention of the high-emissive ability. This high-emissive photoluminescence behavior of the ACDs is accompanied with an excitation-wavelength dependence, a high biocompatibility and a low toxicity, which together make the ACDs advantageous for application in multi-channel bioimaging.

Cu2+-Complex of hydrophilic nitrogen-rich polymer dots applied as a new MRI contrast agent

We report on a novel Cu²⁺-complex of nitrogen-rich polymer dots for magnetic resonance imaging (MRI). The N-rich polymer dots are prepared from N-vinyl imidazole (VIm) by a one-pot hydrothermal synthesis at 220 °C (24 h) and used later on to fabricate a Cu²⁺-PVIm dot complex via efficient incorporation of Cu²⁺ into aqueous medium. The obtained Cu²⁺-PVIm dot complexes display relaxivity (r₁ = 1.05 mM^-1 s^-1) two times higher than Cu²⁺ in aqueous solution (r₁ = 0.43 mM^-1 s^-1) and three times higher than Cu²⁺ in aqueous solution coordinated with VIm monomers (r₁ = 0.32 mM^-1 s^-1), which show a remarkable contrast enhancement for T₁-weighted MRI while efficiently labeling MCF-7 cells and other biomedical applications.

Characterization and adsorptive properties of cross-linked poly (1-vinylimidazole)-iron (III) complex synthesized in supercritical carbon dioxide

In this study, poly (1-vinylimidazole)-iron(III) [PVIm-Fe(III)] complex was investigated along with adsorption behavior of bovine serum albumin (BSA). The cross-linked PVIm-Fe(III) was synthesized in supercritical carbon dioxide by using N,N′-methylenebisacrylamide (BIS) as a cross-linker. The obtained products were analyzed using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and X-ray photoelectron spectra (XPS) analysis. The results reveal that iron ion is complexed by coordination with basic (-N) functional groups of 1-vinylimidazole successfully. The effects of the operating pressure, the ratio of iron and cross-linker concentration were investigated. A fine and yellow powder was obtained at high yield and crosslinking degrees at 20 MPa, 70°C. Additionally, the property of PVIm-Fe(III) complexes in terms of BSA adsorption has been studied, and the higher adsorption capacity was 660 mg/g.

Laccase-catalyzed controlled radical polymerization of N-vinylimidazole

Laccase from Trametes versicolor catalyzes the controlled radical polymerization of N-vinylimidazole, yielding narrowly dispersed, metal-free polymers.