Study on the catalytic performance of laccase in the hydrophobic ionic liquid-based bicontinuous microemulsion stabilized by polyoxyethylene-type nonionic surfactants

Water-pluronic-ionic liquid based microemulsions: Preparation, characterization and application as micro-reactor for enhanced catalytic activity of Cytochrome-c

Microemulsions (µEs), comprising water as polar component, pluronic (normal, L35 and reverse, 10R5) as surfactant and a hydrophobic ionic liquid (HIL) as non-polar component have been prepared and characterized. Owing to higher surface activity, pluronics have promoted the formation of µEs without the use of co-surfactant. Thus prepared µEs have been utilized as nano-reactors for the oxidation of guaiacol in the presence of Cytochrome-c (Cyt-c) at 15, 20, and 25 °C. A 3.2- and 1.3-fold increase in the rate of formation of product of enzymatic catalysis in direct µE (HIL-in-water) with reverse pluronic (10R5) is observed at 15 and 20 °C as compared to that in buffer. However, negligible enzymatic activity is observed in the direct µE formed by normal pluronic (L35). The catalytic activity of Cyt-c decreases in reverse µEs (water-in-HIL) as compared to direct µEs irrespective of the nature of pluronic used. The contrasting nature of nano-interfaces formed by pluronics in µEs and the extent of hydration of these nano-interfaces controlled by temperature exerts varying influence on the catalytic activity of Cyt-c. It is expected that the present work would result in providing a versatile platform for the creation of new IL and pluronic-based µEs for bio-catalytic applications, which have never been reported.

Electropolymerization of EDOT in an anionic surfactant-stabilized hydrophobic ionic liquid-based microemulsion

Here, an anionic surfactant [AOT]^- (bis-(2-ethylhexyl) sulfosuccinate)-stabilized H₂O/[Omim][PF₆] (1-octyl-3-methylimidazolium hexafluorophosphate) microemulsion has been tested for the first time as a medium for the electropolymerization of 3,4-ethylenedioxythiophene (EDOT). To formulate AOT-stabilized [Omim][PF₆]-based microemulsions of different water contents, the phase triangle was determined at 35 °C. Measurements of the conductivities of the microemulsions, their solubilization capacities toward EDOT and their catalytic effects on EDOT electrooxidation show that the present [AOT]^--stabilized ionic liquid microemulsion is a good medium for EDOT electropolymerization. Studies on the process of the electropolymerization of EDOT in this [Omim][PF₆]-based microemulsion indicate that the water content (i.e., microstructure) of the microemulsion medium is an important factor affecting the onset potential and the deposition rate of the PEDOT. The morphology and the doping level of the as-prepared PEDOT are also found to be correlated with the water content of the ionic liquid microemulsion. The microemulsion with higher water content results in a PEDOT with better electroactivity and higher doping levels. FTIR spectra and XPS analysis show that the PEDOT electrosynthesized in the microemulsion is co-doped by both [AOT]^- and [PF₆]^-. Compared with the neat [Omim][PF₆], the use of the ionic liquid microemulsions can reduce not only the consumption of the expensive ionic liquid, but also the onset potential for the electrooxidation of EDOT. Moreover, by tuning the water content of the medium, the electropolymerization of PEDOT and its electrochemical properties could be regulated accordingly. Under the identical deposited charge, the PEDOT originated from the high water content microemulsion (50% H₂O μE) has a higher specific capacitance (124 F g^-1) than that from neat [Omim][PF₆] (117 F g^-1). It follows that the present ionic liquid microemulsion is a good medium for EDOT electropolymerization. The present study opens up a new route for the green and low-cost electrochemical preparation of high-performance PEDOT.

Mixed micelles and bicontinuous microemulsions: Promising media for enzymatic reactions

Enzymes, the natural catalysts, replace catalysts of chemical origin in a wide spectrum of reactions and generally work under environment friendly conditions. Various strategies are adopted to modify catalytic activities of enzymes further, of which one is application of novel reaction medium. This work reviews applicability of novel media like mixed micelles and bicontinuous microemulsions in enzymatic reactions and points out their capability to play bigger roles in enzyme catalysis. Ionic reverse micelles reduced catalytic activities of enzymes through denaturation. Addition of nonionic surfactant to these reverse micelles led to corresponding mixed micelles and thus restored or sometimes enhanced catalytic abilities of enzymes. Mixed micelles comprising of two nonionic surfactants, bicontinuous microemulsion containing two anionic surfactants also acted as efficient reaction media for enzymes. Even a cationic/anionic/nonionic mixed micelle was found to increase activity of enzyme. Mixed micelles and bicontinuous microemulsions comprising of anionic and zwitterionic surfactants augmented enzyme catalysis. Mixed micelles and bicontinuous microemulsions containing ionic liquid and surfactant also had critical impact on enzyme catalysis. Catalytic abilities of enzymes altered significantly in substrate/surfactant and bile salt/surfactant mixed micelles. Concentrations of individual surfactant, molar ratio of surfactants, and molar ratio of water to total surfactants had notable impacts on enzyme catalysis in those media.

Good's buffer ionic liquid tunes the phase behavior of an anionic surfactant SDBS-stabilized n-octane-water microemulsion and the stability of the solubilized horseradish peroxidase

A Good's buffer ionic liquid (GB-IL) composed of quaternary ammonium cations and Good's buffer anions is first introduced into a microemulsion system as a self-buffering and biocompatible electrolyte. The effects of the constituting ions of a GB-IL and their concentrations on the phase behavior of the anionic surfactant SDBS stabilized n-octane-H₂O microemulsion system were studied for the first time using the ε-β fish-like phase diagram method. The result indicates that the phase behavior of the above microemulsion system is greatly affected by GB-IL cations with a longer alkyl chain on the cation being more favorable for phase inversion. Compared with NaCl, a GB-IL of the same concentration is more efficient for achieving phase inversion, due to the dual role of an electrolyte and a co-alcohol. In addition to the phase behavior, the stability of horseradish peroxidase (HRP) solubilized in an SDBS stabilized bicontinuous microemulsion is also affected by a GB-IL. It is found that the variation of the cationic alkyl chain has a negligible effect on the microemulsion microstructure, but has a significant influence on the stability of the solubilized HRP. At a fixed concentration of the GB-IL, the quaternary ammonium cation with a longer alkyl chain is better for the stabilization of the HRP activity. For a given GB-IL, a higher level of the GB-IL results in a better HRP stability. More importantly, the GB-IL-buffered microemulsion, at the same level of the buffering salt, is more advantageous than the phosphate-buffered one for the stabilization of the HRP activity. This advantage is more pronounced for higher concentrations of the GB-IL. This difference in the HRP stability, caused by the buffering salts, should be ascribed to the microemulsion microstructure effect as well as the Hofmeister effect. The present study provides a guideline for the construction of a bicontinuous microemulsion with a simplified composition and stabilizing effect on the solubilized enzyme.

Anionic-Surfactant-Stabilized Hydrophobic Ionic-Liquid-Based Bicontinuous Microemulsion as a Medium for Enzymatic Oxidative Polymerization of Aniline

The hydrophobic ionic liquid [C8mim][PF6] (1-octyl-3-methylimidazolium hexafluorophosphate)-based bicontinuous microemulsion stabilized by the anionic surfactant [C4mim][AOT] (1-butyl-3-methylimidazolium bis(2-ethylhexyl) sulfosuccinate) was first tried as a medium for horseradish peroxidase (HRP)-triggered oxidative polymerization of aniline. The effects of the mass ratio of [C8mim][PF6]-to-water (α), the mass fraction of [C4mim][AOT] in the total mixture (γ), and temperature (T) on the enzymatic polymerization were investigated using UV-vis-NIR absorption, electron spin resonance, and small-angle X-ray scattering spectroscopy techniques. The bicontinuous microemulsion is demonstrated to play a template role in the biosynthesis of polyaniline (PANI). The conductivity of the resulting PANI depends on the microemulsion microstructure and the microstructure- and T-dependent catalytic properties of the solubilized HRP. With the increase in α, the conductivity of the synthesized PANI decreases due to the increase in the template curvature (decrease of the microdomain size) and the decrease in the activity and stability of HRP. Compared with α, γ has little effect on the microdomain size of the template; so, the γ-dependent change in the conductivity of PANI is mainly caused by the changes of the microstructure-dependent activity and stability of HRP. Over the range of 20-35 °C, T has little effect on the microdomain size, but it greatly changes the activity and stability of HRP. With the increase in T, the activity of HRP increases steadily, but its stability decreases significantly, which should be one of the reasons why the conductivity of PANI decreases with increasing T. In conclusion, lower values of α, γ, and T are favorable for the biosynthesis of conductive PANI. The present study not only deepens the insight into the role of the template in the process of PANI synthesis, but also opens up a green new way for the biosynthesis of the conducting polymer.

Biamphiphilic ionic liquid based aqueous microemulsions as an efficient catalytic medium for cytochrome c

Considering the remarkable applicability of ionic liquids (ILs) in bio-catalysis involving enzymes, herein, we report new IL based aqueous microemulsions as a catalytic reactor for cytochrome c (Cyt-c). Microemulsions (μEs), comprising water as the polar component, imidazolium (cation) and dioctylsulfosuccinate (AOT) (anion) based biamphiphilic ionic liquid (BAIL) as the surfactant and a hydrophobic ionic liquid (HIL) as the non-polar component have been prepared and characterized. The use of BAIL has promoted the formation of μEs without any co-surfactant, owing to its higher surface activity. The effect of ester- or amide-functionalization of the alkyl chain of the imidazolium cation of BAILs on the phase behavior of μEs has been investigated. The prepared μEs have been characterized via conductivity, dynamic light scattering (DLS), UV-vis absorption and steady-state fluorescence (using external polarity probes) techniques. The prepared μEs have been employed as nano-reactors for exploring the catalytic activity of Cyt-c. The formed BAIL-water nano-interfaces in reverse μEs have exerted a positive effect on the catalytic activity of Cyt-c stored in a water pool of reverse μEs. A five-fold higher rate constant in μEs as compared to buffer establishes μEs as a better catalytic medium. Furthermore, the differing nature of nano-interfaces created by BAILs and water in reverse μEs, depending on the functionalization of the alkyl chain of the cationic part of BAIL, has exerted varying influence on the catalytic activity of Cyt-c. It is expected that the present work will result in providing a versatile platform for the creation of new IL and water based μEs for bio-catalytic applications.

Dielectric analysis of the percolation, interface polarization, and phase behavior of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/triethylamine microemulsions

Structure transitions, interface distinction and electrical parameters of a nonaqueous ionic liquid microemulsion reflected by concentration-dependent frequency domain dielectric spectroscopy.

Microemulsion Microstructure(s): A Tutorial Review

Microemulsions are thermodynamically stable, transparent, isotropic single-phase mixtures of two immiscible liquids stabilized by surfactants (and possibly other compounds). The assortment of very different microstructures behind such a univocal macroscopic definition is presented together with the experimental approaches to their determination. This tutorial review includes a necessary overview of the microemulsion phase behavior including the effect of temperature and salinity and of the features of living polymerlike micelles and living networks. Once these key learning points have been acquired, the different theoretical models proposed to rationalize the microemulsion microstructures are reviewed. The focus is on the use of these models as a rationale for the formulation of microemulsions with suitable features. Finally, current achievements and challenges of the use of microemulsions are reviewed.

Small-angle X-ray scattering study on nano-scale structures controlled by water content in a binary water/ionic liquid system

We report the water-in-ionic-liquid microemulsions (ME) formed in a binary water/ionic liquid system, without organic solvents, using a surfactant ionic liquid (SAIL) based on 1-butyl-3-methylimidazolium (C4mIm+) as the cation and dioctyl sulfosuccinate (AOT-) as the anion. Small-angle X-ray scattering (SAXS) revealed that MEs were stably formed in the binary water/SAIL solutions in the low water content region (water volume fraction, φw < 0.1), and the ME size systematically increased with increasing φw. We further investigated the nanostructures of the high φw region using a combination of SAXS and rheological measurements and found that the MEs changed to a stacked lamellar structure comprising SAIL bilayers and water phases at φw > 0.12. At the largest water content, φw = 0.99, vesicle structures were obtained.

Broadband dielectric spectroscopy of micelles and microemulsions formed in a hydrophilic ionic liquid: the relaxation mechanism and interior parameters

Permittivity, conductivity and volume fraction of continuous and dispersed phases of micelles and non-aqueous microemulsions formed in ionic liquid.

Dielectric relaxation of nonaqueous ionic liquid microemulsions: polarization, microstructure, and phase transition

Two nonaqueous ionic liquid (IL) microemulsions (toluene/TX-100/[bmim][PF₆] and [bmim][BF₄]/TX-100/benzene) were studied by dielectric spectroscopy covering a wide frequency range (40 Hz to 110 MHz).