Synthetic and analytical considerations for the preparation of amorphous metal-organic frameworks

Metal-organic frameworks (MOFs) are hybrid porous materials presenting several tuneable properties, allowing them to be utilised for a wide range of applications. To date, focus has been on the preparation of novel crystalline MOFs for specific applications. Recently, interest in amorphous MOFs (aMOFs), defined by their lack of correlated long-range order, is growing. This is due to their potential favourable properties compared to their crystalline equivalents, including increased defect concentration, improved processability and gas separation ability. Direct synthesis of these disordered materials presents an alternative method of preparation to post-synthetic amorphisation of a crystalline framework, potentially allowing for the preparation of aMOFs with varying compositions and structures, and very different properties to crystalline MOFs. This perspective summarises current literature on directly synthesised aMOFs, and proposes methods that could be utilised to modify existing syntheses for crystalline MOFs to form their amorphous counterparts. It outlines parameters that could discourage the ordering of crystalline MOFs, before examining the potential properties that could emerge. Methodologies of structural characterisation are discussed, in addition to the necessary analyses required to define a topologically amorphous structure.

Evaluating the Role of Functional Groups in the Selective Capture of Ag(I) onto UiO-66-Type Metal-Organic Frameworks

UiO-66-type metal-organic frameworks have been considered as promising adsorbents for capturing Ag(I) from wastewater. However, uncertainties persist regarding the specific absorptivity of individual functional groups to the UiO-66 framework structure. In this study, UiO-66-type metal-organic frameworks (UiO-66-X), featuring diverse functional groups (X = -(OH)2, -(COOH)2, -NO2, -NH2, -SO3H, -(SH)2), were synthesized in situ for Ag(I) capture. The findings revealed that functionalization significantly enhanced the adsorption capacity of Ag(I). Notably, quantitative analysis showed that 1 mol of -SH functional group onto the UiO-66 framework structure can adsorb 0.73 mol of Ag(I) ions, surpassing those of -COOH, -OH, -NH2, -SO3H, and -NO2 by 2.4-, 3.5-, 3.8-, 9.1-, and 24.3-fold, respectively. This represents the first assessment of the adsorption capacity of functionalized UiO-66 for Ag(I) based on each effective functional group, addressing limitations in traditional unit mass calculations. Further, the adsorption mechanism of UiO-66-X for selectively capturing Ag(I) was elucidated through experimental and theoretical analyses. Additionally, selectivity and practical applications confirm that UiO-66-(SH)2 exhibits strong anti-interference ability, whether in natural water bodies with complex compositions or in industrial wastewater under harsh conditions. We anticipate that this study will enhance our understanding of structure-performance dependencies of multivariate MOFs for designing novel adsorbents for Ag(I) capture.

Flattening of a Bent Sulfonated MOF Linker: Impact on Structures, Flexibility, Gas Adsorption, CO2/N2 Selectivity, and Proton Conduction

Rational design of organic building blocks provides opportunities to control and tune various physicochemical properties of metal-organic frameworks (MOFs), including gas handling, proton conduction, and structural flexibility, the latter of which is responsible for new adsorption phenomena and often superior properties compared to rigid porous materials. In this work, we report synthesis, crystal structures, gas adsorption, and proton conduction for a flexible two-dimensional cadmium-based MOF (JUK-13-SO3H-SO2) containing a new sulfonated 4,4'-oxybis(benzoate) linker with a blocking SO2 bridge. This two-dimensional (2D) MOF is compared in detail with a previously reported three-dimensional Cd-MOF (JUK-13-SO3H), based on analogous, but nonflat, SO2-free sulfonated dicarboxylate. The comprehensive structure-property relationships and the detailed comparisons with insights into the networks flexibility are supported by five guest-dependent structures determined by single-crystal X-ray diffraction (XRD), and corroborated by spectroscopy (IR, 1H NMR), powder XRD, and elemental/thermogravimetric analyses, as well as by volumetric adsorption measurements (for N2, CO2, H2O), ideal adsorbed solution theory (IAST), density-functional theory (DFT+D) quantum chemical and grand-canonical Monte Carlo (GCMC) calculations, and electrochemical impedance spectroscopy (EIS) studies. Whereas both dynamic MOFs show moderate proton conductivity values, they exhibit excellent CO2/N2 selectivity related to the capture of CO2 from flue gases (IAST coefficients for 15:85 mixtures are equal to ca. 250 at 1 bar and 298 K). The presence of terminal sulfonate groups in both MOFs, introduced using a unique prechlorosulfonation strategy, is responsible for their hydrophilicity and water-assisted proton transport ability. The dynamic nature of the MOFs results in the appearance of breathing-type adsorption isotherms that exhibit large hysteresis loops (for CO2 and H2O) attributed to strong host-guest interactions. Theoretical modeling provides information about the adsorption mechanism and supports interpretation of experimental CO2 adsorption isotherms.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Systematic Thiol Decoration in a Redox-Active UiO-66-(SH)2 Metal-Organic Framework: A Case Study under Oxidative and Reductive Conditions

The practical applicability of thiolated metal-organic frameworks (MOFs) remains challenging due to their low crystallinity and transient stability. Herein, we present a one-pot solvothermal synthesis process using varying ratios of 2,5-dimercaptoterephthalic acid (DMBD) and 1,4-benzene dicarboxylic acid (100/0, 75/25, 50/50, 25/75, and 0/100) to prepare stable mixed-linker UiO-66-(SH)₂ MOFs (ML-U66SX). For each variant, the effects of different linker ratios on the crystallinity, defectiveness, porosity, and particle size have been discussed in detail. In addition, the impact of modulator concentration on these features has also been described. The stability of ML-U66SX MOFs was investigated under reductive and oxidative chemical conditions. The mixed-linker MOFs were used as sacrificial catalyst supports to highlight the interplay of template stability on the rate of the gold-catalyzed 4-nitrophenol hydrogenation reaction. The release of catalytically active gold nanoclusters originating from the framework collapse decreased with the controlled DMBD proportion, resulting in a 59% drop in the normalized rate constants (9.11-3.73 s^-1 mg^-1). In addition, post-synthetic oxidation (PSO) was used to further probe the stability of the mixed-linker thiol MOFs under harsh oxidative conditions. Following oxidation, the UiO-66-(SH)₂ MOF underwent immediate structural breakdown, unlike other mixed-linker variants. Along with crystallinity, the microporous surface area of the post-synthetically oxidized UiO-66-(SH)₂ MOF could be increased from 0 to 739 m² g^-1. Thus, the present study delineates a mixed-linker strategy to stabilize the UiO-66-(SH)₂ MOF under harsh chemical conditions through meticulous thiol decoration.

Highly Efficient One-Step Conversion of Fructose to Biofuel 5-Ethoxymethylfurfural Using a UIO-66-SO3H Catalyst

In this study, a novel sulfonic acid-modified catalyst for MOFs (UIO-66-SO3H) was synthesized using chlorosulfonic acid as a sulfonating reagent and first used as efficient heterogeneous catalysts for the one-pot conversion of fructose into biofuel 5-ethoxymethylfurfural (EMF) in a cosolvent free system. The physicochemical properties of this catalyst were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), and powder X-ray diffraction (XRD). The characterization demonstrated that the sulfonic acid group was successfully grafted onto the MOF material and did not cause significant changes to its morphology and structure. Furthermore, the effects of catalyst acid amount, reaction temperature, reaction time, and catalyst dosage on reaction results were investigated. The results showed that the conversion of fructose was 99.7% within 1 h at 140°C, while the EMF yield reached 80.4%. This work provides a viable strategy by application of sulfonic acid-based MOFs for the efficient synthesis of potential liquid fuel EMF from renewable biomass.

Coordination-driven self-assembly of a series of dinuclear M2L2 mesocates with a bis-bidentate pyridylimine ligand

Four isostructural dinuclear M2L2 mesocates of the general formula [M2(NCS)4(L)2]·4.5MeOH (1M; M = Mn, Fe, Co, Zn) were constructed by using the coordination-driven self-assembly of the [M(NCS)2] precursor and the flexible bis-bidentate pyridylimine Schiff base ligand L (L = 4,4'-(1,4-phenylenebis(oxy))bis(N-(pyridin-2-ylmethylene)aniline). The centrosymmetric M2L2 mesocate forms through the side-by-side coordination of two L ligands to a pair of M(ii) ions. The mesocates exhibit a reversible temperature induced desolvation-solvation behavior without losing their structural integrity. The activated 1Co, as the representative M2L2 mesocate, shows an exceptionally high MeOH vapour uptake capacity of 481.9 cm3 g-1 (68.8 wt%) at STP with good recyclability. Notably, it also exhibits CO2 adsorption with an uptake capacity of 20.2 cm3 g-1 (3.6 wt%) at room temperature and 1 bar.

Zinc(ii) and cadmium(ii) amorphous metal-organic frameworks (aMOFs): study of activation process and high-pressure adsorption of greenhouse gases

Two novel amorphous metal-organic frameworks (aMOFs) with chemical composition {[Zn2(MTA)]·4H2O·3DMF} n (UPJS-13) and {[Cd2(MTA)]·5H2O·4DMF} n (UPJS-14) built from Zn(ii) and Cd(ii) ions and extended tetrahedral tetraazo-tetracarboxylic acid (H4MTA) as a linker were prepared and characterised. Nitrogen adsorption measurements were performed on as-synthesized (AS), ethanol exchanged (EX) and freeze-dried (FD) materials at different activation temperatures of 60, 80, 100, 120, 150 and 200 °C to obtain the best textural properties. The largest surface areas of 830 m2 g-1 for UPJS-13 (FD) and 1057 m2 g-1 for UPJS-14 (FD) were calculated from the nitrogen adsorption isotherms for freeze-dried materials activated at mild activation temperature (80 °C). Subsequently, the prepared compounds were tested as adsorbents of greenhouse gases, carbon dioxide and methane, measured at high pressures. The maximal adsorption capacities were 30.01 wt% CO2 and 4.84 wt% CH4 for UPJS-13 (FD) and 24.56 wt% CO2 and 6.38 wt% CH4 for UPJS-14 (FD) at 20 bar and 30 °C.

Trends and Prospects in UiO-66 Metal-Organic Framework for CO2 Capture, Separation, and Conversion

Among thousands of known metal-organic frameworks (MOFs), the University of Oslo's MOF (UiO-66) exhibits unique structure topology, chemical and thermal stability, and intriguing tunable properties, that have gained incredible research interest. This paper summarizes the structural advancement of UiO-66 and its role in CO₂ capture, separation, and transformation into chemicals. The first part of the review summarizes the fast-growing literature related to the CO₂ capture reported by UiO-66 during the past ten years. The second part provides an overview of various advancements in UiO-66 membranes in CO₂ purification. The third part describes the role of UiO-66 and its composites as catalysts for CO₂ conversion into useful products. Despite many achievements, significant challenges associated with UiO-66 are addressed, and future perspectives are comprehensively presented to forecast how UiO-66 might be used further for CO₂ management.

Porous flexible frameworks: origins of flexibility and applications

Porous crystalline frameworks including zeolites, metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen-bonded organic frameworks (HOFs) have attracted great research interest in recent years. In addition to their assembly in the solid-state being fundamentally interesting and aesthetically pleasing, their potential applications have now pervaded in different areas of chemistry, biology and materials science. When framework materials are endowed with 'flexibility', they exhibit some properties (e.g., stimuli-induced pore breathing and reversible phase transformations) that are distinct from their rigid counterparts. Benefiting from flexibility and porosity, these framework materials have shown promise in applications that include separation of toxic chemicals, isotopes and hydrocarbons, sensing, and targeted delivery of chemicals. While flexibility in MOFs has been widely appreciated, recent developments of COFs and HOFs have established that flexibility is not just limited to MOFs. In fact, zeolites-that are considered rigid when compared with MOFs-are also known to exhibit dynamic modes. Despite flexibility may be conceived as being detrimental to the formation and stability of periodic structures, the landscape of flexible framework structures continues to expand with discovery of new materials with promising applications. In this review, we make an account of different flexible framework materials based on their framework types with a more focus on recent examples and delve into the origin of flexibility in each case. This systematic analysis of different flexibility types based on their origins enables understanding of structure-property relationships, which should help guide future development of flexible framework materials based on appropriate monomer design and tailoring their properties by bottom-up approach. In essence, this review provides a summary of different flexibility types extant to framework materials and critical analysis of importance of flexibility in emerging applications.

The chemistry and applications of hafnium and cerium(iv) metal-organic frameworks

The coordination connection of organic linkers to the metal clusters leads to the formation of metal-organic frameworks (MOFs), where the metal clusters and ligands are spatially entangled in a periodic manner. The immense availability of tuneable ligands of different length and functionalities gives rise to robust molecular porosity ranging from several angstroms to nanometres. Among the large family of MOFs, hafnium (Hf) based MOFs have been demonstrated to be highly promising for practical applications due to their unique and outstanding characteristics such as chemical, thermal, and mechanical stability, and acidic nature. Since the report of UiO-66(Hf) and DUT-51(Hf) in 2012, less than 200 Hf-MOFs (ca. 50 types of structures) have been reported. Besides, tetravalent cerium [Ce(iv)] has been proven to be capable of forming similar topological MOF structures to Zr and Hf since its first discovery in 2015. So far, ca. 40 Ce(iv) MOFs with 60% having UiO-66-type structure have been reported. This review will offer a holistic summary of the chemistry, uniqueness, synthesis, and applications of Hf/Ce(iv)-MOFs with a focus on presenting the development in the Hf/Ce(iv)-clusters, topologies, ligand structures, synthetic strategies, and practical applications of Hf/Ce(iv)-MOFs. In the end, we will present the research outlook for the development of Hf/Ce(iv)-MOFs in the future, including fundamental design of Hf/Ce(iv)-clusters, defect engineering, and various applications including membrane development, diversified types of catalytic reactions, irradiation absorption in nuclear waste treatment, water production and wastewater treatment, etc. We will also present the emerging computational approaches coupled with machine-learning algorithms that can be applied in screening Hf and Ce(iv) based MOF structures and identifying the best-performing MOFs for tailor-made applications in future practice.

Metal-Organic Frameworks: Synthetic Methods and Potential Applications

Metal-organic frameworks represent a porous class of materials that are build up from metal ions or oligonuclear metallic complexes and organic ligands. They can be considered as sub-class of coordination polymers and can be extended into one-dimension, two-dimensions, and three-dimensions. Depending on the size of the pores, MOFs are divided into nanoporous, mesoporous, and macroporous items. The latter two are usually amorphous. MOFs display high porosity, a large specific surface area, and high thermal stability due to the presence of coordination bonds. The pores can incorporate neutral molecules, such as solvent molecules, anions, and cations, depending on the overall charge of the MOF, gas molecules, and biomolecules. The structural diversity of the framework and the multifunctionality of the pores render this class of materials as candidates for a plethora of environmental and biomedical applications and also as catalysts, sensors, piezo/ferroelectric, thermoelectric, and magnetic materials. In the present review, the synthetic methods reported in the literature for preparing MOFs and their derived materials, and their potential applications in environment, energy, and biomedicine are discussed.

Hard-and-Soft Integration Strategy for Preparation of Exceptionally Stable Zr(Hf)-UiO-66 via Thiol-Ene Click Chemistry

UiO-66 metal-organic frameworks (MOFs) are unstable in some harsh aqueous environments, which limit their practical applications. We demonstrate a postsynthetic modification methodology to transform hydrophilic Zr(Hf)-UiO-66 into superhydrophobic Zr(Hf)-UiO-66-SH-y (SH = thiol, y = fluoroalkyl) by introducing long fluoroalkyl chains into organic linkers through a thiol-ene click reaction. Water contact angles of the four modified UiO-66 MOFs are all larger than 150°. The grafted low-surface-energy fluorine-containing groups become an effective protective shield for the MOFs, making them exhibit remarkable stability in extreme conditions such as alkaline (pH = 12), saturated HCl, and high concentration of NaCl solution (20 wt %). The Zr-UiO-66 MOFs grafted with 1H,1H,2H-perfluoro-1-hexene have high CO₂ adsorption contents of 1.54 and 2.88 mmol·g^-1 at 298 and 273 K, respectively. Moreover, the superhydrophobic MOFs also showed potential application in oil/water separation.

Tuning Pt and Cu sites population inside functionalized UiO-67 MOF by controlling activation conditions

The exceptional thermal and chemical stability of the UiO-66, -67 and -68 classes of isostructural MOFs [J. Am. Chem. Soc., 2008, 130, 13850] makes them ideal materials for functionalization purposes aimed at introducing active centres for potential application in heterogeneous catalysis. We previously demonstrated that a small fraction (up to 10%) of the linkers in the UiO-67 MOF can be replaced by bipyridine-dicarboxylate (bpydc) moieties exhibiting metal-chelating ability and enabling the grafting of Pt(ii) and Pt(iv) ions in the MOF framework [Chem. Mater., 2015, 27, 1042] upon interaction with PtCl₂ or PtCl₄ precursors. Herein we extend this functionalization approach in two directions. First, we show that by controlling the activation of the UiO-67-Pt we can move from a material hosting isolated Pt(ii) sites anchored to the MOF framework with Pt(ii) exhibiting two coordination vacancies (potentially interesting for C-H bond activation) to the formation of very small Pt nanoparticles hosted inside the MOF cavities (potentially interesting for hydrogenation reactions). The second direction consists of the extension of the approach to the insertion of Cu(ii), obtained via interaction with CuCl₂, and exhibiting interesting redox properties. All materials have been characterized by in situ X-ray absorption spectroscopy at the Pt L₃- and Cu K-edges.

Chemically Cross-Linked MOF Membrane Generated from Imidazolium-Based Ionic Liquid-Decorated UiO-66 Type NMOF and Its Application toward CO2 Separation and Conversion

Carbon dioxide capture and transformation are of great importance to make cuts in greenhouse gas emissions. Nanometal-organic frameworks (NMOFs) could serve as ideal fillers for polymer membranes owing to their structural diversity and regulable microenvironment of the nanocage. Herein, a bifunctional, robust, and chemically cross-linked NMOF-based membrane was successfully constructed by the postsynthetic polymerization of imidazolium-based ionic liquid (IL)-decorated UiO-66 type nanoparticles (NPs) and the isocyanate-terminated polyurethane oligomer under mild conditions. The IL-modified MOF-polymer membranes exhibit a highly selective adsorption for CO₂ over N₂ and CH₄. In addition, the obtained membrane can also be a highly active heterogeneous catalyst for CO₂ transformation by cycloaddition with epoxide under an ambient pressure.

Pressure controlled drug release in a Zr-cluster-based MOF

A Zr-cluster-based MOF ZJU-800 was synthesized with high drug loading capacity for controllable drug delivery from 2 days to 8 days.