Heterostructured Ag@MOF-801/MIL-88A(Fe) Nanocomposite as a Biocompatible Photocatalyst for Degradation of Reactive Black 5 under Visible Light

Heterostructured Ag@MOF-801/MIL-88A(Fe) nanocomposite was synthesized through template effects in metal-organic frameworks (MOFs). MIL-88A(Fe) was fabricated on a MOF-801 template using the internal extended growth method (IEGM) via polyvinylpyrrolidone (PVP) as the structure-director agent to create the MIL-88A(Fe)-on-MOF-801 heterostructure. The MOF-801/MIL-88A(Fe) heterostructure was used as a template for the formation of Ag nanoparticles (NPs) inside it via a double solvents method (DSM) combined with a photoreduction route (PR). To characterize synthesized samples to a high level of detail, PXRD, FT-IR, EDX, N2 adsorption-desorption isotherms, TEM, DRS, PL, EIS, and Mott-Sckottky measurements were used. The resulting Ag@MOF-801/MIL-88A(Fe) nanocomposite demonstrated the highest photocatalytic activity of 91.72% for the degradation of Reactive Black 5, after 30 min under visible light irradiation.

A Keggin-type polyoxometalate-based metal-organic complex as a highly efficient heterogeneous catalyst for the selective oxidation of alkylbenzenes

The direct oxidation of C-H bonds in organic materials into necessary oxygen-containing compounds under mild conditions has attracted increasing attention. A Keggin-type polyoxometalate-based metal-organic complex (MOC), [CuII4Cu^I(H₂trz)₄(C₂O₄)(H₂O)₄(H₃PW_11.18CuII0.82O₄₀)]·8H₂O (1) (H₃trz = 1,2,4-triazole), was designed and synthesized under hydrothermal conditions, and was structurally characterized by single crystal X-ray diffraction, PXRD, IR spectroscopy, TGA, and XPS. Complex 1 is a 3D 4,6,8-connected architecture derived from [Cu₅(H₂trz)₄(C₂O₄)₂(H₂O)₂]_n units and [PW_11.18Cu_0.82O₄₀]^6- anions, which can catalytically oxidize various types of alkylbenzenes. Gas chromatographic analysis showed that complex 1 as a heterogeneous catalyst could effectively catalyze the oxidation of diphenylmethane with 93% conversion and 99% selectivity within 6 h. In addition, the conversion for the catalytic oxidation of ethylbenzene was 96% with 99% selectivity. Compared with some reported catalysts, complex 1 exhibited a better catalytic effect and lower reaction time. Meanwhile, the catalytic oxidation of other benzyl derivatives with complex 1 was also investigated, which indicated that complex 1 possessed excellent catalytic performance.

Ag/AgCl@MIL-88A(Fe) heterojunction ternary composites: towards the photocatalytic degradation of organic pollutants

The efficient utilization of solar energy has received tremendous interest due to the increasing environmental and energy concerns. The present paper discusses the efficient integration of a plasmonic photocatalyst (Ag/AgCl) with an iron-based metal-organic framework (MIL-88A(Fe)) for boosting the visible light photoreactivity of MIL-88A(Fe). Two composites of Ag/AgCl@MIL-88A(Fe), namely MAG-1 and MAG-2 (stoichiometric ratio of Fe to Ag is 5 : 1 and 2 : 1), were successfully synthesized via facile in situ hydrothermal methods followed by UV reduction. The synthesized composite materials are characterized by FTIR, PXRD, UVDRS, PL, FESEM/EDX, TEM and BET analyses. The Ag/AgCl@MIL-88A(Fe) (MAG-2) hybrid system shows excellent photocatalytic activity for the degradation of p-nitrophenol (PNP), rhodamine B (RhB), and methylene blue (MB) under sunlight. We found that 91% degradation of PNP in 80 min, 99% degradation of RhB in 70 min and 94% degradation of MB in 70 min have taken place by using MAG-2 as a catalyst under sunlight. The superior activity of Ag/AgCl@MIL-88A(Fe) (MAG-2) is attributed to the synergistic effects from the surface plasmon resonance (SPR) of Ag NPs and the electron transfer from MIL-88A(Fe) to Ag nanoparticles for effective separation of electron-hole pairs. Furthermore, the mechanism of degradation of PNP, RhB and MB is proposed by analyzing the electron transfer pathway in Ag/AgCl@MIL-88A(Fe).

Heterogenisation of polyoxometalates and other metal-based complexes in metal–organic frameworks: from synthesis to characterisation and applications in catalysis

This review provides a thorough overview of composites with molecular catalysts (polyoxometalates, or organometallic or coordination complexes) immobilised into MOFs via non-covalent interactions.

Ion-Exchange Fabrication of Hierarchical Al-MOF-Based Resin Catalysts for the Tandem Reaction

Metal-organic framework (MOF)-supported macroscale resin catalysts, IRA900(xOH)-MIL-101(Al)-NH₂ (x means the concentration of NaOH), with spatially isolated antagonistic acid-base active sites were successfully synthesized through a novel strategy by ion exchange and in situ solvothermal methods. The hierarchical pore system of the as-prepared catalysts effectively promotes the mass transfer and contacts with catalytic active centers during the organic reactions. Therefore, the environmentally friendly catalysts exhibit excellent superior activity and stability in one-pot deacetalization-Knoevenagel condensation reaction, and the yield by optimal IRA900(0.2OH)-MIL-101(Al)-NH₂ reaches close to 99% after 5 h at 110 °C. Thanks to the millimeter-sized resin carrier and robust sphere morphology, the recycling of the as-prepared catalysts only requires natural sedimentation. This work presents an effective strategy to build low-toxic acid-base catalysts by combining the advantages of ion-exchange resins and functionalized MOF materials.

POM@MOF Hybrids: Synthesis and Applications

The hybrid materials that are created by supporting or incorporating polyoxometalates (POMs) into/onto metal–organic frameworks (MOFs) have a unique set of properties. They combine the strong acidity, oxygen-rich surface, and redox capability of POMs, while overcoming their drawbacks, such as difficult handling, a low surface area, and a high solubility. MOFs are ideal hosts because of their high surface area, long-range ordered structure, and high tunability in terms of the pore size and channels. In some cases, MOFs add an extra dimension to the functionality of hybrids. This review summarizes the recent developments in the field of POM@MOF hybrids. The most common applied synthesis strategies are discussed, together with major applications, such as their use in catalysis (organocatalysis, electrocatalysis, and photocatalysis). The more than 100 papers on this topic have been systematically summarized in a handy table, which covers almost all of the work conducted in this field up to now.

Strategies for Incorporating Catalytically Active Polyoxometalates in Metal-Organic Frameworks for Organic Transformations

Polyoxometalates (POMs) can benefit from immobilization on solid supports to overcome their difficulty in processability and stability. Among the reported solid supports, metal-organic frameworks (MOFs) offer a crystalline, versatile platform for depositing highly active POMs. The combination of these structures can at times benefit from the combined reactivity of both the POM and MOF, sometimes synergistically, to improve catalysis while balancing desirable properties like porosity, substrate diffusion, or stability. In this Review, we survey the strategies for immobilizing POMs within MOF structures, with an emphasis on how physical and catalytic properties of the parent materials are affected in the composite when employed in organic transformations.

Isopolymolybdate-based inorganic–organic hybrid compounds constructed by multidentate N-donor ligands: syntheses, structures and properties

Five isopolymolybdate-based hybrid compounds were achieved and their photocatalytic activities for dye degradation were explored.

Polyoxometalate-Based Metal-Organic Frameworks for Selective Oxidation of Aryl Alkenes to Aldehydes

Polyoxometalates (POMs) show considerable catalytic performance toward the selective oxidation of alkenes to aldehydes, which is commercially valuable for the production of pharmaceuticals, dyes, perfumes, and fine chemicals. However, the low specific surface area of POMs as heterogeneous catalysts and poor recyclability as homogeneous catalysts have hindered their wide application. Dispersing POMs into metal-organic frameworks (MOFs) for the construction of POM-based MOFs (POMOFs) suggests a promising strategy to realize the homogeneity of heterogeneous catalysis. Herein, we report two new POMOFs with chemical formulas of [Co(BBTZ)₂][H₃BW₁₂O₄₀]·10H₂O (1) and [Co₃(H₂O)₆(BBTZ)₄][BW₁₂O₄₀]·NO₃·4H₂O (2) (BBTZ = 1,4-bis(1,2,4-triazol-1-ylmethyl)benzene) for the selective oxidation of alkenes to aldehydes. Compound 1 possesses a non-interpenetrated three-dimensional (3D) cds-type open framework with a 3D channel system. Compound 2 displays a 3D polyrotaxane framework with one-dimensional channels along the [100] direction. In the selective oxidation of styrene into benzaldehyde, compound 1 can achieve a 100% conversion in 4 h with 96% selectivity toward benzaldehyde, which is superior to that of compound 2. A series of control experiments reveal that the co-role of [BW₁₂O₄₀]^5- and Co²⁺ active center as well as a more open framework feature co-promote the catalytic property of the POMOFs in this case. This work may suggest a new option for the development of POMOF catalysts in the selective oxidation of alkenes.