Enhanced photocatalytic reduction of Cr(VI) from aqueous solution using Fe0/TiO2-based polymeric nanocomposites

The combination of zerovalent iron (Fe0) and titanium dioxide (TiO2) has been investigated as a promising method for environmental remediation. However, it is a challenge to prepare conveniently desirable Fe0/TiO2 nanocomposites with excellent efficiency and reusability. Here, a novel nanocomposite material, Fe0/TiO2@D201, was synthesized to enhance the removal of Cr(VI) from an aqueous system by impregnating Fe0 and TiO2 inside a commercial anion exchanger (D201). The proposed structure and Cr(VI) removal mechanism of Fe0/TiO2@D201 were confirmed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analysis. Compared to the monometallic samples (Fe0-D201 and TiO2-D201), Fe0/TiO2@D201 showed outstanding Cr(VI) removal and the removal ratio reached up to 97.30% after 120 min of UV light irradiation. The removal of Cr(VI) by Fe0/TiO2@D201 remained high (91.70%) even after four cycles, indicating the stability of the nanocomposites toward Cr(VI) removal and their strong potential for practical applications. The addition of ethylenediaminetetraacetic acid (EDTA) positively affected the Cr(VI) reduction process, whereas the addition of Na2S2O8 negatively affected the Cr(VI) process. The XPS results revealed that the photocatalytic reduction of Cr(VI) by Fe0/TiO2@D201 involved the capture of photoexcited electrons and Fe0 reduction. A path for the photogenerated electrons engaging in the reduction reaction to improve the utilization of Fe0 was proposed. These results demonstrate that Fe0/TiO2@D201 is a promising alternative composite catalyst for the efficient Cr(VI) removal from contaminated water.

Advances in metal(loid) oxyanion removal by zerovalent iron: Kinetics, pathways, and mechanisms

Metal(loid) oxyanions in groundwater, surface water, and wastewater can have harmful effects on human or ecological health due to their high toxicity, mobility, and lack of degradation. In recent years, the removal of metal(loid) oxyanions using zerovalent iron (ZVI) has been the subject of many studies, but the full scope of this literature has not been systematically reviewed. The main elements that form metal(loid) oxyanions under environmental conditions are Cr(VI), As(V and III), Sb(V and III), Tc(VII), Re(VII), Mo(VI), V(V), etc. The removal mechanisms of metal(loid) oxyanions by ZVI may involve redox reactions, adsorption, precipitation, and coprecipitation, usually with one of these mechanisms being the main reaction pathway and the other playing auxiliary roles. However, the removal mechanisms are coupled to the reactions involved in corrosion of Fe(0) and reaction conditions. The layer of iron oxyhydroxides that forms on ZVI during corrosion mediates the sequestration of metal(loid) oxyanions. This review summarizes most of the currently available data on mechanisms and performance (e.g., kinetics) of removal of the most widely studies metal(loid) oxyanion contaminants (Cr, As, Sb) by different types of ZVI typically used in wastewater treatment, as well as ZVI that has been sulfidated or combination with catalytic bimetals.

Synthesis of Oxygen Deficient TiO2 for Improved Photocatalytic Efficiency in Solar Radiation

The photocatalytic activities of TiO2 have been limited mainly to absorbing in the ultraviolet spectrum which accounts for only 5% of solar radiation. High energy band gap and electron recombination in TiO2 nanoparticles are responsible for its limitations as a photocatalyst. An oxygen deficient surface can be artificially created on the titanium oxide by zero valent nano iron through the donation of its excess electrons. A visible light active TiO2 nanoparticle was synthesized in the current investigation through simple chemical reduction using sodium boro-hydride. The physical and textural properties of the synthesized oxygen deficient TiO2 photocatalyst was measured using scanning/ transmission electron microscopy while FTIR, XRD and nitrogen sorption methods (BET) were employed for its further characterizations. Photochemical decoloration of orange II sodium dye solution in the presence of the synthesized TiO2 was measured using an UV spectrophotometer. The resulting oxygen deficient TiO2 has a lower energy band-gap, smaller pore sizes, and enhanced photo-catalytic properties. The decoloration (88%) of orange (II) sodium salt solution (pH 2) under simulated solar light was possible at 20 min. This study highlights the effect of surface oxygen defects, crystal size and energy band-gap on the photo-catalytical property of TiO2 nanoparticles as impacted by nano zero valent iron. It opens a new window in the exploitation of instability in the dopant ions for creation of a visible light active TiO2 photocatalyst.

Smectite-supported chain of iron nanoparticle beads for efficient clean-up of arsenate contaminated water

Prolonged exposure to inorganic arsenic (As) via drinking water is a major concern as it poses significant human health risks. Removal of As is crucial but requires effective and environment-friendly clean-up technology to avoid any additional risk to the environment. In this study, we developed Australian smectite (smec)-supported nano zero-valent iron (nZVI) composite for arsenate i.e., As(V) sorption. We used a range of tools, including X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) and energy dispersion X-ray (EDS) spectroscopy to characterise the material. SEM and TEM images and elemental mapping of the composite reflect that the smectite layer was surrounded by a chain of iron nanobeads evenly distributed on clay particles, which is quite exceptional among currently available nZVIs. The maximum As(V) sorption capacity of this composite was 23.12 mg/g in the ambient conditions. Using X-ray photoelectron spectroscopy we unveiled chemical states of As and Fe before and after the sorption process. Additionally, the release of iron nanoparticles from the composite at various pHs (3-10) were found negligible, which demonstrates the effectiveness of smec-nZVI to remove As(V) from contaminated water without posing any secondary pollutant.

Nano-remediation of toxic heavy metal contamination: Hexavalent chromium [Cr(VI)]

The inexorable industrialization and modern agricultural practices to meet the needs of the increasing population have polluted the environment with toxic heavy metals such as Cr(VI), Cu²⁺, Cd²⁺, Pb^2+, and Zn²⁺. Among the hazardous heavy metal(loid)s contamination in agricultural soil, water, and air, hexavalent chromium [Cr(VI)] is the most virulent carcinogen. The metallurgic industries, tanneries, paint manufacturing, petroleum refineries are among various such human activities that discharge Cr(VI) into the environment. Various methods have been employed to reduce the concentration of Cr(VI) contamination with nano and bioremediation being the recent advancement to achieve recovery at low cost and higher efficiency. Bioremediation is the process of using biological sources such as plant extracts, microorganisms, and algae to reduce the heavy metals while the nano-remediation uses nanoparticles to adsorb heavy metals. In this review, we discuss the various activities that liberate Cr(VI). We then discuss the various conventional, nano-remediation, and bioremediation methods to keep Cr(VI) concentration in check and further discuss their efficiencies. We also discuss the mechanism of nano-remediation techniques for better insight into the process.

Highly efficient visible-driven reduction of Cr(VI) by a novel black TiO2 photocatalyst

Finding a facile and practical method to produce black TiO₂ remains a challenge. Bismuth-vanadium co-doped black TiO₂ (BVBT) was synthesized as a visible light driven photocatalyst by a simple one-pot hydrothermal method. The synthesized BVBT was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), UV-vis diffuse reflectance spectroscopy (UV-Vis DRS). The light absorption of the synthesized Bi-V co-coped black TiO₂ nanoparticles was significantly improved in the visible and infrared regions. The XRD patterns indicated that the black TiO₂ contained mixed phases of brookite, anatase, and rutile of TiO₂. This was further confirmed by Raman spectroscopy. The photocatalytic activity of the sample was evaluated by reduction of hexavalent chromium (Cr(VI)) under visible light irradiation. Among investigated hole (h⁺) scavengers, ethylenediaminetetraacetic acid (EDTA) led to the highest reduction of Cr(VI) with a molar ratio of 1:5 (EDTA:Cr(VI)). The results indicated that the Bi-V co-coped black TiO₂ nanocomposite can reduce 94% of 1 mg/L of Cr(VI) within 20 min irradiation time (pH 3 and catalyst dose of 1 g/L). Introducing a simple method to synthesize black TiO₂ which has absorption in the visible and infrared region can open up new applications.

Enhancement of LED based photocatalytic degradation of sulfolane by integration with oxidants and nanomaterials

In this study, oxidants and nanomaterials were used to improve titanium dioxide based photocatalytic degradation of sulfolane. Hydrogen peroxide (H₂O₂), sodium persulfate (SPS) and ozone (O₃) were the oxidants studied and carbon nanotubes (CNT) and nanosized zero valent iron (nZVI) were used as the nanomaterials. The impact of these oxidants and nanomaterials was evaluated at various dosages in both Milli-Q water and groundwater. The results indicate that with a suitable dose of oxidants or nanomaterials, photocatalytic degradation of sulfolane in Milli-Q water can be enhanced. The addition of ozone contributed to a significant increase in sulfolane degradation rate in Milli-Q water. The experiments conducted in groundwater showed that oxidants (H₂O₂, SPS and O₃) increased the degradation of sulfolane while the nanomaterials (CNT and nZVI) impeded sulfolane degradation in groundwater.

Immobilization of Cr(VI) in Soil Using a Montmorillonite-Supported Carboxymethyl Cellulose-Stabilized Iron Sulfide Composite: Effectiveness and Biotoxicity Assessment

A novel composite of montmorillonite-supported carboxymethyl cellulose-stabilized nanoscale iron sulfide (CMC@MMT-FeS), prepared using the co-precipitation method, was applied to remediate hexavalent chromium (Cr(VI))-contaminated soil. Cr(VI)-removal capacity increased with increasing FeS-particle loading. We tested the efficacy of CMC@MMT-FeS at three concentrations of FeS: 0.2, 0.5, and 1 mmol/g, hereafter referred to as 0.2 CMC@MMT-FeS, 0.5 CMC@MMT-FeS, and 1.0 CMC@MMT-FeS, respectively. The soil Cr(VI) concentration decreased by 90.7% (from an initial concentration of 424.6 mg/kg to 39.4 mg/kg) after 30 days, following addition of 5% (composite-soil mass proportion) 1.0 CMC@MMT-FeS. When 2% 0.5 CMC@MMT-FeS was added to Cr(VI)-contaminated soil, the Cr(VI) removal efficiency, as measured in the leaching solution using the toxicity characteristic leaching procedure, was 90.3%, meeting the environmental protection standard for hazardous waste (5 mg/kg). The European Community Bureau of Reference (BCR) test confirmed that the main Cr fractions in the soil samples changed from acid-exchangeable fractions to oxidable fractions and residual fractions after 30 days of soil remediation by the composite. Moreover, the main complex formed during remediation was Fe(III)-Cr(III), based on BCR and X-ray photoelectron spectroscopy analyses. Biotoxicity of the remediated soils, using Vicia faba and Eisenia foetida, was analyzed and evaluated. Our results indicate that CMC@MMT-FeS effectively immobilizes Cr(VI), with widespread potential application in Cr(VI)-contaminated soil remediation.

Chitosan-sodium alginate multilayer membrane developed by Fe0@WO3 nanoparticles: Photocatalytic removal of hexavalent chromium

The WO₃ nanostructures were modified by doping with iron and then the polyethersulfone (PES) ultrafiltration (UF) membrane was developed using prepared Fe⁰-doped WO₃ photocatalytic nanoparticles via layer by layer technology. According to UV-vis diffuse reflectance spectroscopy (UV-vis/DRS) characterization, the photocatalytic activity of WO₃ nanoparticles could be improved by doping with Fe impurity. The prepared membranes were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX) and contact angle analyzer. The novel photocatalytic membranes were used in removal of hexavalent chromium (Cr(VI)) ions in batch mode as well as filtration system. The novel photocatalytic membranes have shown significant Cr(VI) ions removal under visible-light illumination. By depositing the (CHI-ALG)_3.5 bilayers on the PES/UF membrane surface, the Cr(VI) rejection for 5, 25 and 50 mg/l feed concentration were enhanced from 21%, 17% and 9% for neat PES to 56.3%, 41.6% and 30.1% for PES/ (CHI-ALG)_3.5 membrane and 99.2%, 92.1% and 78.1% for PES/ (CHI-ALG)_3.5/ Fe⁰@WO₃ membrane, respectively.

Chitosan-titanium oxide fibers supported zero-valent nanoparticles: Highly efficient and easily retrievable catalyst for the removal of organic pollutants

Different chitosan-titanium oxide (CS-TiO₂-x, with x = TiO₂ loadings of 1, 5, 10,15 and 20 wt%) nanocomposite fibers were prepared and kept separately in each salt solution of CuSO₄, CoNO₃, AgNO₃ and NiSO₄ to adsorb Cu²⁺, Co²⁺, Ag⁺, and Ni⁺ ions, respectively. The metal ions loaded onto CS-TiO₂ fibers were reduced to their respective zero-valent metal nanoparticles (ZV-MNPs) like Cu⁰, Co⁰, Ag⁰ and Ni⁰ by treating with NaBH₄. The CS-TiO₂ fibers templated with various ZV-MNPs were characterized and investigated for their catalytic efficiency. Among all prepared ZV-MNPs, Cu⁰ nanoparticles templated on CS-TiO₂-15 fibers exhibited high catalytic efficiency for the reduction of dyes (methyl orange (MO), congo red (CR), methylene blue (MB) and acridine orange (AO)) and nitrophenols (4-nitrohphenol (4-NP), 2-nitrophenol (2-NP), 3-nitrophenol (3-NP) and 2,6-dinitrophenol (2,6-DNP)). Besides the good catalytic activities of Cu/CS-TiO₂-15 fibers, it could be easily recovered by simply pulling the fiber from the reaction medium.

From nZVI to SNCs: development of a better material for pollutant removal in water

Nanoscale zero-valent iron (nZVI), with its reductive potentials and wide availability, offers degradative remediation for environmental pollutants. However, weaknesses such as easy aggregation, easy oxidation, and nanoscale size have hindered its further applications in the environment to some extent. Therefore, various supported nZVI composites (SNCs) with higher dispersibility, enhanced water stability, and tunable size have been developed to overcome the weaknesses. SNCs family is a great alternative for water purification applications that require high removal efficiency and rapid kinetics, as a result of their multifunctional properties and magnetic separation capacity. In this review, we compare the advantages of SNCs to nZVI for pollutant removal in water, discuss for the first time the synthetic techniques of obtaining SNCs, and analyze the influencing factors and mechanisms associated with the removal of some typical hazardous pollutants (e.g., dyes, heavy metals, nitrogen, and phosphorus) using SNCs. Moreover, limitations and future research needs of such material are discussed. More attention should be paid to the evaluation of toxicity, development of green synthetic routes, and potential application areas of such materials in future research.

Hexavalent chromium removal by multilayer membrane assisted by photocatalytic couple nanoparticle from both permeate and retentate

In this study, a novel photocatalytic thin film nanocomposite (TFC) membrane was prepared for removal of hexavalent chromium (Cr(VI)) from aqueous solution. In this regards, a TFC membrane was modified by a layer of chitosan as an adsorbent and then was coated with a layer of synthesized photocatalytic nanoscale zerovalent iron@titanium dioxide (nZVI@TiO₂) nanoparticles via layer-by-layer (LBL) technology. Prepared membranes were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and contact angle analysis. The Cr(VI) removal efficiency of the membranes was evaluated by batch removal and dynamic filtration tests. The water flux was increased from 26.2 to 39.7l/m²h as a consequence of improved hydrophilicity which was approved by contact angle analysis. The modified TFC membrane has shown the significant removal of Cr(VI) in retentate as well as the permeate stream. Further, the Cr(VI) removal of retentate flow decreased with increasing pH and feed concentration whereas the Cr(VI) removal of permeate was enhanced with increasing initial feed concentration. Increasing the flux recovery from 62% (for neat TFC) to 87% (for modified TFC membrane) demonstrated that the modification of membrane improved the anti-fouling property of the modified membrane.

N-Doped graphene-supported PdCu nanoalloy as efficient catalyst for reducing Cr(vi) by formic acid

Reducing Cr(vi) to Cr(iii) with formic acid is desirable for environmental protection, but the sluggish kinetics limits its practical application, which currently motivates the intensive study of efficient catalysts for this redox reaction. Here bimetallic PdCu nanoalloy (∼5 nm in size) supported by N-doped graphene was synthesized through a one-pot hydrothermal process. The catalytic activity of PdCu nanoalloy highly depends on the Pd/Cu atomic ratio and N-doped graphene support. The obtained Pd₆Cu₄/NG shows superior catalysis towards the Cr(vi) reduction by formic acid with a high kinetic constant (k_n = 23.2 min^-1 mg^-1) and a low activation energy (E_a = 34.9 kJ mol^-1). Active H atoms were found to be the exact reductant for the Cr(vi) reduction, quite different from the reported H₂-reduction route. The enhanced catalysis originates from the electronic and geometric modification of active Pd after formation of PdCu alloy. Electron transfer from Cu to Pd enhances the electron density of Pd atoms, which favors the adsorption of the bridging formate intermediate and subsequent generation of active H atoms over PdCu/NG. The catalyst can be recycled five times without obvious loss of activity. Our work provides an example to explore the alloying effect on the catalytic behavior of PdCu alloy, which may shed light on developing other advanced nanoalloys for Cr(vi) reduction.

Antimicrobial effects of zero-valent iron nanoparticles on gram-positive Bacillus strains and gram-negative Escherichia coli strains

Background

Zero-valent iron nanoparticles (ZVI NPs) have been used extensively for the remediation of contaminated soil and groundwater. Owing to their large active surface area, they serve as strong and effective reductants. However, the ecotoxicity and bioavailability of ZVI NPs in diverse ecological media have not been evaluated in detail and most studies have focused on non-nano ZVI or Fe⁰. In addition, the antimicrobial properties of ZVI NPs have rarely been investigated, and the underlying mechanism of their toxicity remains unknown.

Results

In the present study, we demonstrate that ZVI NPs exhibited significant toxicity at 1000 ppm against two distinct gram-positive bacterial strains (Bacillus subtilis 3610 and Bacillus thuringiensis 407) but not against two gram-negative strains (Escherichia coli K12 and ATCC11634). Specifically, ZVI NPs caused at least a 4-log and 1-log reductions in cell numbers, respectively, in the two Bacillus strains, whereas no change was detected in the two E. coli strains. X-ray photoelectron spectroscopy, X-ray absorption near-edge, and extended X-ray absorption fine structure spectra confirmed that Bacillus cells exposed to ZVI NPs contained mostly Fe₂O₃ with some detectable FeS. This finding indicated that Fe⁰ nanoparticles penetrated the bacterial cells, where they were subsequently oxidized to Fe₂O₃ and FeS. RedoxSensor analysis and propidium iodide (PI) staining showed decreased reductase activity and increased PI in both Bacillus strains treated with a high (1000 ppm) concentration of ZVI NPs.

Conclusion

Taken together, these data show that the toxicity of ZVI NPs was derived from their oxidative properties, which may increase the levels of reactive oxygen species and lead to cell death.

Anion selective pTSA doped polyaniline@graphene oxide-multiwalled carbon nanotube composite for Cr(VI) and Congo red adsorption

Multiwalled carbon nanotube (CNT)-graphene oxide (GO) composite was combined with polyaniline (Pani) using an oxidative polymerisation technique. The resulting Pani@GO-CNT was later doped with para toluene sulphonic acid (pTSA) to generate additional functionality. The functional groups exposed on the GO, Pani and pTSA were expected to impart a high degree of functionality to the pTSA-Pani@GO-CNT composite system. The composite was characterised by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The characterisation results revealed the characteristics of Pani, GO, CNT, and pTSA, and suggested the successful formation of the pTSA-Pani@GO-CNT composite system. The composite was utilised successfully for the adsorptive removal of Cr(IV) and Congo red (CR) dye and the adsorption of both pollutants was found to be strongly dependent on the solution pH, adsorbate concentration, contact time, and reaction temperature. The maximum adsorption of Cr(IV) and CR was observed in an acidic medium at 30°C. The kinetics for Cr(IV) and CR adsorption was studied using pseudo-first order, pseudo-second order, and intraparticle diffusion models. The adsorption equilibrium data were also fitted to the Langmuir and Freundlich isotherm models. The thermodynamic results showed that the adsorption process was exothermic in nature. The present study provides a new methodology for the preparation of a highly functionalised Pani-based nanocomposite system and its potential applications to the adsorptive removal of a multicomponent pollutant system from an aqueous solution.