One Reaction: Two Types of Mechanism-SARA-ATRP and SET-LRP-for MMA Polymerization in the Presence of PVC

This study presents for the first time the polymerization of methyl methacrylate (MMA) in the presence of poly(vinyl chloride) (PVC) that takes place by both SARA-ATRP and SET-LRP mechanisms. The two types of polymerizations that occur in the system are PMMA grafting to the PVC backbone and the formation of a new PMMA polymer, both occurring in the presence of a Cu0wire. The polymerizations were controlled as confirmed by the molecular weight evolution, polymerization kinetics, and variations in the dispersity value. The MMA polymerization in the presence of PVC at 60 and 70 °C leads to the formation of two polymer species characterized by an increase in the molecular weight with the conversion and a narrowing of the dispersity value with the reaction progress. To increase the degree of control over the polymerization, the same reaction was performed at room temperature, which allowed us to highlight the presence of the SARA-ATRP and SET-LRP mechanisms via subsequent polymer chain extensions. The results demonstrated that PMMA grafting on PVC polymers follows a SARA-ATRP mechanism, while the formation of a PMMA homopolymer entails a SET-LRP process. The influence of solvent nature on the polymerization reaction was studied by performing the grafting of N-isopropylacrylamide (NIPAM) onto the surface of PVC particles in aqueous media in the presence and in the absence of CuCl2. The polymerization reactions and the obtained materials were studied by gel permeation chromatography (GPC), 1H NMR, DMA, scanning electron microscopy (SEM), and atomic force microscopy (AFM).

Assembling Complex Macromolecules and Self-Organizations of Biological Relevance with Cu(I)-Catalyzed Azide-Alkyne, Thio-Bromo, and TERMINI Double "Click" Reactions

In 2022, the Nobel Prize in Chemistry was awarded to Bertozzi, Meldal, and Sharpless "for the development of click chemistry and biorthogonal chemistry". Since 2001, when the concept of click chemistry was advanced by Sharpless laboratory, synthetic chemists started to envision click reactions as the preferred choice of synthetic methodology employed to create new functions. This brief perspective will summarize research performed in our laboratories with the classic Cu(I)-catalyzed azide-alkyne click (CuAAC) reaction elaborated by Meldal and Sharpless, with the thio-bromo click (TBC) and with the less-used, irreversible TERminator Multifunctional INItiator (TERMINI) dual click (TBC) reactions, the last two elaborated in our laboratory. These click reactions will be used to assemble, by accelerated modular-orthogonal methodologies, complex macromolecules and self-organizations of biological relevance. Self-assembling amphiphilic Janus dendrimers and Janus glycodendrimers together with their biological membrane mimics known as dendrimersomes and glycodendrimersomes as well as simple methodologies to assemble macromolecules with perfect and complex architecture such as dendrimers from commercial monomers and building blocks will be discussed. This perspective is dedicated to the 75th anniversary of Professor Bogdan C. Simionescu, the son of my (VP) Ph.D. mentor, Professor Cristofor I. Simionescu, who as his father, took both science and science administration in his hands, and dedicated his life to handling them in a tandem way, to their best.

Polyacrylates Derived from Biobased Ethyl Lactate Solvent via SET-LRP

The precise synthesis of polymers derived from alkyl lactate ester acrylates is reported for the first time. Kinetic experiments were conducted to demonstrate that Cu(0) wire-catalyzed single electron transfer-living radical polymerization (SET-LRP) in alcohols at 25 °C provides a green methodology for the LRP of this forgotten class of biobased monomers. The acrylic derivative of ethyl lactate (EL) solvent and homologous structures with methyl and n-butyl ester were polymerized with excellent control over molecular weight, molecular weight distribution, and chain-end functionality. Kinetics plots in conventional alcohols such as ethanol and methanol were first order in the monomer, with molecular weight increasing linearly with conversion. However, aqueous EL mixtures were found to be more suitable than pure EL to mediate the SET-LRP process. The near-quantitative monomer conversion and high bromine chain-end functionality, demonstrated by matrix-assisted laser desorption ionization time-of-flight analysis, further allowed the preparation of innovative biobased block copolymers containing rubbery poly(ethyl lactate acrylate) poly(ELA) sequences. For instance, the poly(ELA)- b-poly(glycerol acrylate) block copolymer self-assembled in water to form stable micelles with chiral lactic acid-derived block-forming micellar core as confirmed by the pyrene-probe-based fluorescence technique. Dynamic light scattering and transmission electron microscopy measurements revealed the nanosize spherical morphology for these biobased aggregates.

SET-LRP of Bio- and Petroleum-Sourced Methacrylates in Aqueous Alcoholic Mixtures

Single-electron transfer-living radical polymerization (SET-LRP) in "programmed" aqueous organic biphasic systems eliminates the judicious choice of solvent and also provides accelerated reaction rates. Herein, we report efforts to expand the monomer scope for these systems by targeting methacrylic monomers and polymers. Various environmentally friendly aqueous alcoholic mixtures were used in combination with Cu(0) wire catalyst, tris(2-dimethylaminoethyl)amine (Me₆-TREN) ligand, and p-toluenesulfonyl chloride (Ts-Cl) initiator to deliver well-defined polymethacrylates from methyl methacrylate, butyl methacrylate, and other monomers derived from biomass feedstock (e.g., lactic acid, isosorbide, furfural, and lauric acid). The effect of water on the nature of the reaction mixture during the SET-LRP process, reaction rate, and control of the polymerization is discussed. The control retained under the reported conditions is demonstrated by synthesizing polymers of different targeted molar mass as well as quasi-block AB copolymers by "in situ" chain extension at high conversion. These results highlight the capabilities of SET-LRP to provide sustainable solutions based on renewable resources.

Ultra-low volume oxygen tolerant photoinduced Cu-RDRP

We introduce the first oxygen tolerant ultra-low volume (as low as 5 μL) photoinduced Cu-RDRP of a range of hydrophobic, hydrophilic and semi-fluorinated monomers.

Fast track access to multi-block copolymers via thiol-bromo click reaction of telechelic dibromo polymers

Multi-block copolymers offer a plethora of exciting properties, easily tuned by modulating parameters such as monomer composition, block length, block number and dispersity.

Highly reactive α-bromoacrylate monomers and Michael acceptors obtained by Cu(ii)Br2-dibromination of acrylates and instantaneous E2 by a ligand

The importance of the order of addition of reagents in SET-LRP.

Macromonomers, telechelics and more complex architectures of PMA by a combination of biphasic SET-LRP and biphasic esterification

Macromonomers and telechelics of PMA via biphasic SET-LRP and biphasic esterification with potassium acrylate.

Acetone: a solvent or a reagent depending on the addition order in SET-LRP

The importance of reagent order in biphasic SET-LRP in acetone/water mixtures is shown.

MALDI-LID-ToF/ToF analysis of statistical and diblock polyacrylate copolymers

We report the use of MALDI-LID-ToF/ToF utilising the laser induced dissociation (LID) fragmentation technique, which has been almost exclusively applied to protein/peptide analysis to date.

Acrylate-macromonomers and telechelics of PBA by merging biphasic SET-LRP of BA, chain extension with MA and biphasic esterification

Chain extension of PBA with MA allows the preparation of acrylate-functional PBA.

SET-LRP in biphasic mixtures of fluorinated alcohols with water

Efficient and inexpensive SET-LRP in biphasic-mixtures of fluorinated alcohols with water.

Supported Cu0 nanoparticles catalyst for controlled radical polymerization reaction and block-copolymer synthesis

The synthesis of Cu⁰ nanoparticles on different supports and their activity in controlled living radical polymerization processes is presented. The type of support influences the final size of the copper nanoparticles as well as their adhesion to the support. These aspects have a direct influence on the characteristics of the polymers obtained. The best results were obtained for SiO₂ particles, which afforded a good molecular weight distribution (Mw/Mn = 1.25). The activity, recovery and recycling of the catalyst was explored for ultrafast polymerization reaction of butyl acrylate. Further, the terminal bromine reactivity was used for the synthesis of a block poly(n butyl acrylate-block-styrene). The influence of ligand type on the control of the reaction was studied. Also, a straightforward polymerization procedure without any ligand afforded a polydispersity value of 1.38.

Recent Developments in the Synthesis of Biomacromolecules and their Conjugates by Single Electron Transfer-Living Radical Polymerization

Single electron transfer-living radical polymerization (SET-LRP) represents a robust and versatile tool for the synthesis of vinyl polymers with well-defined topology and chain end functionality. The crucial step in SET-LRP is the disproportionation of the Cu(I)X generated by activation with Cu(0) wire, powder, or nascent Cu(0) generated in situ into nascent, extremely reactive Cu(0) atoms and nanoparticles and Cu(II)X₂. Nascent Cu(0) activates the initiator and dormant chains via a homogeneous or heterogeneous outer-sphere single-electron transfer mechanism (SET-LRP). SET-LRP provides an ultrafast polymerization of a plethora of monomers (e.g., (meth)-acrylates, (meth)-acrylamides, styrene, and vinyl chloride) including hydrophobic and water insoluble to hydrophilic and water soluble. Some advantageous features of SET-LRP are (i) the use of Cu(0) wire or powder as readily available catalysts under mild reaction conditions, (ii) their excellent control over molecular weight evolution and distribution as well as polymer chain ends, (iii) their high functional group tolerance allowing the polymerization of commercial-grade monomers, and (iv) the limited purification required for the resulting polymers. In this Perspective, we highlight the recent advancements of SET-LRP in the synthesis of biomacromolecules and of their conjugates.

Acetone–water biphasic mixtures as solvents for ultrafast SET-LRP of hydrophobic acrylates

Transformation of SET-LRP catalyzed with Cu(0) wire from single phase (acetone/water = 9/1, v/v) into biphase (acetone/water = 8/2, v/v).

Searching for efficient SET-LRP systems via biphasic mixtures of water with carbonates, ethers and dipolar aprotic solvents

Screening biphasic mixtures of water with carbonates, ethers and dipolar aprotic solvents to discover new SET-LRP solvent systems.

Mussel-inspired thermoresponsive polymers with a tunable LCST by Cu(0)-LRP for the construction of smart TiO2 nanocomposites

Thermoresponsive polymers with different microstructures, a tunable LCST and terminal catechol anchors were synthesized by Cu(0)-LRP for the surface functionalization of TiO₂ nanoparticles.

SET-LRP mediated by TREN in biphasic water–organic solvent mixtures provides the most economical and efficient process

Screening ligands and solvents for economical and efficient biphasic SET-LRP.

Glass surface modification via Cu(0)-mediated living radical polymerization of fluorinated and non-fluorinated acrylates

The glass surface was modified via Cu(0)-mediated living radical polymerization of butyl acrylate and trifluoroethyl methacrylate by using the grafting from and grafting to methodologies.

The stirring rate provides a dramatic acceleration of the ultrafast interfacial SET-LRP in biphasic acetonitrile–water mixtures

The rate of interfacial SET-LRP in biphasic acetonitrile–water mixtures is stirring rate dependent.

Electrochemical Atom Transfer Radical Polymerization in Miniemulsion with a Dual Catalytic System

An electrochemical approach was used to control atom transfer radical polymerization (ATRP) of n-butyl acrylate (BA) in miniemulsion. Electropolymerization required a dual catalytic system, composed of an aqueous phase catalyst and an organic phase catalyst. This allowed shuttling the electrochemical stimulus from the working electrode (WE) to the continuous aqueous phase and to the dispersed monomer droplets. As aqueous phase catalysts, the hydrophilic Cu complexes with the ligands N,N-bis( 2-pyridylmethyl)-2-hydroxyethylamine (BPMEA), 2,2'-bipyridine (bpy), and tris(2-pyridylmethyl)amine (TPMA) were tested. As organic phase catalysts, the hydrophobic complexes with the ligands bis(2-pyridylmethyl)-octadecylamine (BPMODA) and bis[2-(4-methoxy-3,5-dimethyl)-pyridylmethyl]octadecylamine (BPMODA*) were evaluated. Highest rates and best control of BA electropolymerization were obtained with the water-soluble Cu/BPMEA used in combination with the oil-soluble Cu/BPMODA*. The polymerization rate could be further enhanced by changing the potential applied at the WE. Differently from traditional ATRP systems, reactivity of the dual catalytic system did not depend on the redox potential of the catalysts but instead depended on the hydrophobicity and partition coefficient of the aqueous phase catalyst.

End of Frustration: Catalytic Precision Polymerization with Highly Interacting Lewis Pairs

Herein we report on the catalytic polymerization of diverse Michael-type monomers with high precision by using simple but highly active combinations of phosphorus-containing Lewis bases and organoaluminum compounds. The interacting Lewis pair catalysts enable the control of molecular weight and microstructure of the produced polymers. The reactions show a linear Mn vs consumption plot thus proving a living type polymerization. The initiation has been investigated by end-group analysis with ESI mass spectrometric analysis. With these main-group element Lewis acid base pairs, it is not only possible to polymerize sterically demanding, functionalized as well as heteroatom containing monomers but also, for the first time, to catalytically polymerize extended Michael systems, like 4-vinylpyridine.

Grafting of functional methacrylate polymer brushes by photoinduced SET-LRP

The growth of polymer brushes from a variety of methacrylate monomers was accomplished using UV light as a polymerization trigger.

Quantitative end-group functionalization of PNIPAM from aqueous SET-LRP via in situ reduction of Cu(ii) with NaBH4

Rapid in situ azidation and CuAAC ‘click’ reaction demonstrating very high chain-end functionality.

Ultrafast SET-LRP in biphasic mixtures of the non-disproportionating solvent acetonitrile with water

The two kinetic regime, low conversion and low chain end functionality seen in copper catalyzed polymerization of acrylates in acetonitrile was transformed into a SET-LRP kinetic, to complete conversion and quantitative chain end functionality in a biphasic mixture containing 10% water.

A multiple-stage activation of the catalytically inhomogeneous Cu(0) wire used in SET-LRP

The surface of a Cu(0) wire used as a catalyst in SET-LRP is inhomogeneous since it contains a combination of Cu(111) and Cu(100) faces of the FCC unit cell whose ratio is dependent on the fabrication method. A method to activate this inhomogeneous Cu(0) wire for SET-LRP is reported.

The synergistic effect during biphasic SET-LRP in ethanol–nonpolar solvent–water mixtures

Adding a nonpolar solvent to ethanol–water reaction mixtures transforms SET-LRP of BA from triphasic to biphasic exhibiting a synergistic effect.