1
|
Gulati K, Adachi T. Profiling to Probing: Atomic force microscopy to characterize nano-engineered implants. Acta Biomater 2023; 170:15-38. [PMID: 37562516 DOI: 10.1016/j.actbio.2023.08.006] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/22/2023] [Revised: 07/26/2023] [Accepted: 08/03/2023] [Indexed: 08/12/2023]
Abstract
Surface modification of implants in the nanoscale or implant nano-engineering has been recognized as a strategy for augmenting implant bioactivity and achieving long-term implant success. Characterizing and optimizing implant characteristics is crucial to achieving desirable effects post-implantation. Modified implant enables tailored, guided and accelerated tissue integration; however, our understanding is limited to multicellular (bulk) interactions. Finding the nanoscale forces experienced by a single cell on nano-engineered implants will aid in predicting implants' bioactivity and engineering the next generation of bioactive implants. Atomic force microscope (AFM) is a unique tool that enables surface characterization and understanding of the interactions between implant surface and biological tissues. The characterization of surface topography using AFM to gauge nano-engineered implants' characteristics (topographical, mechanical, chemical, electrical and magnetic) and bioactivity (adhesion of cells) is presented. A special focus of the review is to discuss the use of single-cell force spectroscopy (SCFS) employing AFM to investigate the minute forces involved with the adhesion of a single cell (resident tissue cell or bacterium) to the surface of nano-engineered implants. Finally, the research gaps and future perspectives relating to AFM-characterized current and emerging nano-engineered implants are discussed towards achieving desirable bioactivity performances. This review highlights the use of advanced AFM-based characterization of nano-engineered implant surfaces via profiling (investigating implant topography) or probing (using a single cell as a probe to study precise adhesive forces with the implant surface). STATEMENT OF SIGNIFICANCE: Nano-engineering is emerging as a surface modification platform for implants to augment their bioactivity and achieve favourable treatment outcomes. In this extensive review, we closely examine the use of Atomic Force Microscopy (AFM) to characterize the properties of nano-engineered implant surfaces (topography, mechanical, chemical, electrical and magnetic). Next, we discuss Single-Cell Force Spectroscopy (SCFS) via AFM towards precise force quantification encompassing a single cell's interaction with the implant surface. This interdisciplinary review will appeal to researchers from the broader scientific community interested in implants and cell adhesion to implants and provide an improved understanding of the surface characterization of nano-engineered implants.
Collapse
Affiliation(s)
- Karan Gulati
- Institute for Life and Medical Sciences, Kyoto University, Sakyo, Kyoto 606-8507, Japan; The University of Queensland, School of Dentistry, Herston QLD 4006, Australia.
| | - Taiji Adachi
- Institute for Life and Medical Sciences, Kyoto University, Sakyo, Kyoto 606-8507, Japan
| |
Collapse
|
2
|
Handrea-Dragan IM, Botiz I, Tatar AS, Boca S. Patterning at the micro/nano-scale: Polymeric scaffolds for medical diagnostic and cell-surface interaction applications. Colloids Surf B Biointerfaces 2022; 218:112730. [DOI: 10.1016/j.colsurfb.2022.112730] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/23/2022] [Revised: 07/15/2022] [Accepted: 07/25/2022] [Indexed: 11/27/2022]
|
3
|
Pattem J, Davrandi M, Aguayo S, Slak B, Maev R, Allan E, Spratt D, Bozec L. Dependency of hydration and growth conditions on the mechanical properties of oral biofilms. Sci Rep 2021; 11:16234. [PMID: 34376751 PMCID: PMC8355335 DOI: 10.1038/s41598-021-95701-4] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/24/2021] [Accepted: 07/21/2021] [Indexed: 11/21/2022] Open
Abstract
Within the oral cavity, dental biofilms experience dynamic environments, in part due to changes in dietary content, frequency of intake and health conditions. This can impact bacterial diversity and morpho-mechanical properties. While phenotypic properties of oral biofilms are closely related to their composition, these can readily change according to dynamic variations in the growth environment and nutrient availability. Understanding the interlink between phenotypic properties, variable growth conditions, and community characterization is an essential requirement to develop structure–property relationships in oral-biofilms. In this study, the impact of two distinct growth media types with increasing richness on the properties of oral biofilms was assessed through a new combination of in-vitro time-lapse biophysical methods with microbiological assays. Oral biofilms grown in the enriched media composition presented a decrease in their pH, an increase in soluble EPS production, and a severe reduction in bacterial diversity. Additionally, enriched media conditions presented an increase in biofilm volumetric changes (upon hydration) as well as a reduction in elastic modulus upon indentation. With hydration time considered a major factor contributing to changes in biofilm mechanical properties, we have shown that it is less associated than media richness. Future investigations can now use this time-lapse approach, with a clearer focus on the extracellular matrix of oral biofilms dictating their morpho-mechanical properties.
Collapse
Affiliation(s)
- J Pattem
- Division of Biomaterials and Tissue Engineering, UCL Eastman Dental Institute, University College London, London, UK. .,National Centre for Molecular Hydrodynamics, and Soft Matter Biomaterials and Bio-Interfaces, University of Nottingham, The Limes Building, Sutton Bonington Campus, Sutton Bonington, Leicestershire, LE12 5RD, UK.
| | - M Davrandi
- Division of Microbial Diseases, UCL Eastman Dental Institute, University College London, London, UK
| | - S Aguayo
- School of Dentistry, Faculty of Medicine, Pontificia Universidad Catolica de Chile, Santiago, Chile
| | - B Slak
- Department of Electrical and Computer Engineering, University of Windsor, Windsor, Canada
| | - R Maev
- Department of Electrical and Computer Engineering, University of Windsor, Windsor, Canada
| | - E Allan
- Division of Microbial Diseases, UCL Eastman Dental Institute, University College London, London, UK
| | - D Spratt
- Division of Microbial Diseases, UCL Eastman Dental Institute, University College London, London, UK
| | - L Bozec
- Division of Biomaterials and Tissue Engineering, UCL Eastman Dental Institute, University College London, London, UK.,Faculty of Dentistry, University of Toronto, Toronto, Canada
| |
Collapse
|
4
|
Ramírez OJ, Alvarez S, Contreras-Kallens P, Barrera NP, Aguayo S, Schuh CMAP. Type I collagen hydrogels as a delivery matrix for royal jelly derived extracellular vesicles. Drug Deliv 2021; 27:1308-1318. [PMID: 32924637 PMCID: PMC7534280 DOI: 10.1080/10717544.2020.1818880] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022] Open
Abstract
Throughout the last decade, extracellular vesicles (EVs) have become increasingly popular
in several areas of regenerative medicine. Recently, Apis
mellifera royal jelly EVs (RJ EVs) were shown to display favorable wound
healing properties such as stimulation of mesenchymal stem cell migration and inhibition
of staphylococcal biofilms. However, the sustained and effective local delivery of EVs in
non-systemic approaches – such as patches for chronic cutaneous wounds – remains an
important challenge for the development of novel EV-based wound healing therapies.
Therefore, the present study aimed to assess the suitability of type I collagen -a
well-established biomaterial for wound healing – as a continuous delivery matrix. RJ EVs
were integrated into collagen gels at different concentrations, where gels containing
2 mg/ml collagen were found to display the most stable release kinetics. Functionality of
released RJ EVs was confirmed by assessing fibroblast EV uptake and migration in a wound
healing assay. We could demonstrate reliable EV uptake into fibroblasts with a sustained
pro-migratory effect for up to 7 d. Integrating fibroblasts into the RJ EV-containing
collagen gel increased the contractile capacity of these cells, confirming availability of
RJ EVs to fibroblasts within the collagen gel. Furthermore, EVs released from collagen
gels were found to inhibit Staphylococcus aureus ATCC 29213
biofilm formation. Overall, our results suggest that type I collagen could be utilized as
a reliable, reproducible release system to deliver functional RJ EVs for wound healing
therapies.
Collapse
Affiliation(s)
- Orlando J Ramírez
- Facultad de Medicina, Centro de Medicina Regenerativa, Clínica Alemana Universidad del Desarrollo, Santiago, Chile
| | - Simón Alvarez
- Facultad de Medicina, Centro de Medicina Regenerativa, Clínica Alemana Universidad del Desarrollo, Santiago, Chile
| | - Pamina Contreras-Kallens
- Facultad de Medicina, Centro de Medicina Regenerativa, Clínica Alemana Universidad del Desarrollo, Santiago, Chile
| | - Nelson P Barrera
- Faculty of Biological Sciences, Department of Physiology, Pontificia Universidad Católica de Chile, Santiago, Chile
| | - Sebastian Aguayo
- Faculty of Medicine, Dentistry School, Pontificia Universidad Católica de Chile, Santiago, Chile.,Institute for Biological and Medical Engineering, Schools of Engineering, Medicine and Biological Sciences, Pontificia Universidad Católica de Chile, Santiago, Chile
| | - Christina M A P Schuh
- Facultad de Medicina, Centro de Medicina Regenerativa, Clínica Alemana Universidad del Desarrollo, Santiago, Chile
| |
Collapse
|
5
|
Ganjian M, Modaresifar K, Zhang H, Hagedoorn PL, Fratila-Apachitei LE, Zadpoor AA. Reactive ion etching for fabrication of biofunctional titanium nanostructures. Sci Rep 2019; 9:18815. [PMID: 31827149 PMCID: PMC6906493 DOI: 10.1038/s41598-019-55093-y] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/21/2019] [Accepted: 11/20/2019] [Indexed: 02/06/2023] Open
Abstract
One of the major problems with the bone implant surfaces after surgery is the competition of host and bacterial cells to adhere to the implant surfaces. To keep the implants safe against implant-associated infections, the implant surface may be decorated with bactericidal nanostructures. Therefore, fabrication of nanostructures on biomaterials is of growing interest. Here, we systematically studied the effects of different processing parameters of inductively coupled plasma reactive ion etching (ICP RIE) on the Ti nanostructures. The resultant Ti surfaces were characterized by using scanning electron microscopy and contact angle measurements. The specimens etched using different chamber pressures were chosen for measurement of the mechanical properties using nanoindentation. The etched surfaces revealed various morphologies, from flat porous structures to relatively rough surfaces consisting of nanopillars with diameters between 26.4 ± 7.0 nm and 76.0 ± 24.4 nm and lengths between 0.5 ± 0.1 μm and 5.2 ± 0.3 μm. The wettability of the surfaces widely varied in the entire range of hydrophilicity. The structures obtained at higher chamber pressure showed enhanced mechanical properties. The bactericidal behavior of selected surfaces was assessed against Staphylococcus aureus and Escherichia coli bacteria while their cytocompatibility was evaluated with murine preosteoblasts. The findings indicated the potential of such ICP RIE Ti structures to incorporate both bactericidal and osteogenic activity, and pointed out that optimization of the process conditions is essential to maximize these biofunctionalities.
Collapse
Affiliation(s)
- Mahya Ganjian
- Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology, Mekelweg 2, 2628 CD, Delft, The Netherlands.
| | - Khashayar Modaresifar
- Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology, Mekelweg 2, 2628 CD, Delft, The Netherlands
| | - Hongzhi Zhang
- Department of Materials, Mechanics, Management & Design, Faculty of Civil Engineering and Geosciences, Delft University of Technology, Stevinweg 1, 2628 CN, Delft, The Netherlands
| | - Peter-Leon Hagedoorn
- Department of Biotechnology, Faculty of Applied Sciences, Delft University of Technology, Van der Maasweg 9, 2629 HZ, Delft, The Netherlands
| | - Lidy E Fratila-Apachitei
- Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology, Mekelweg 2, 2628 CD, Delft, The Netherlands
| | - Amir A Zadpoor
- Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology, Mekelweg 2, 2628 CD, Delft, The Netherlands
| |
Collapse
|
6
|
Aguayo S, Schuh CMAP, Vicente B, Aguayo LG. Association between Alzheimer's Disease and Oral and Gut Microbiota: Are Pore Forming Proteins the Missing Link? J Alzheimers Dis 2019; 65:29-46. [PMID: 30040725 DOI: 10.3233/jad-180319] [Citation(s) in RCA: 33] [Impact Index Per Article: 6.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
Abstract
Alzheimer's disease (AD) is a neurodegenerative condition affecting millions of people worldwide. It is associated with cerebral amyloid-β (Aβ) plaque deposition in the brain, synaptic disconnection, and subsequent progressive neuronal death. Although considerable progress has been made to elucidate the pathogenesis of AD, the specific causes of the disease remain highly unknown. Recent research has suggested a potential association between certain infectious diseases and dementia, either directly due to bacterial brain invasion and toxin production, or indirectly by modulating the immune response. Therefore, in the present review we focus on the emerging issues of bacterial infection and AD, including the existence of antimicrobial peptides having pore-forming properties that act in a similar way to pores formed by Aβ in a variety of cell membranes. Special focus is placed on oral bacteria and biofilms, and on the potential mechanisms associating bacterial infection and toxin production in AD. The role of bacterial outer membrane vesicles on the transport and delivery of toxins as well as porins to the brain is also discussed. Aβ has shown to possess antimicrobial activity against several bacteria, and therefore could be upregulated as a response to bacteria and bacterial toxins in the brain. Although further research is needed, we believe that the control of biofilm-mediated diseases could be an important potential prevention mechanism for AD development.
Collapse
|
7
|
|
8
|
Bactericidal effects of nanopatterns: A systematic review. Acta Biomater 2019; 83:29-36. [PMID: 30273746 DOI: 10.1016/j.actbio.2018.09.059] [Citation(s) in RCA: 108] [Impact Index Per Article: 21.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/22/2018] [Revised: 09/01/2018] [Accepted: 09/27/2018] [Indexed: 12/27/2022]
Abstract
We systematically reviewed the currently available evidence on how the design parameters of surface nanopatterns (e.g. height, diameter, and interspacing) relate to their bactericidal behavior. The systematic search of the literature resulted in 46 studies that satisfied the inclusion criteria of examining the bactericidal behavior of nanopatterns with known design parameters in absence of antibacterial agents. Twelve of the included studies also assessed the cytocompatibility of the nanopatterns. Natural and synthetic nanopatterns with a wide range of design parameters were reported in the included studies to exhibit bactericidal behavior. However, most design parameters were in the following ranges: heights of 100-1000 nm, diameters of 10-300 nm, and interspacings of <500 nm. The most commonly used type of nanopatterns were nanopillars, which could kill bacteria in the following range of design parameters: heights of 100-900 nm, diameters of 20-207 nm, and interspacings of 9-380 nm. The vast majority of the cytocompatibility studies (11 out of 12) showed no adverse effects of bactericidal nanopatterns with the only exception being nanopatterns with extremely high aspect ratios. The paper concludes with a discussion on the evidence available in the literature regarding the killing mechanisms of nanopatterns and the effects of other parameters including surface affinity of bacteria, cell size, and extracellular polymeric substance (EPS) on the killing efficiency. STATEMENT OF SIGNIFICANCE: The use of nanopatterns to kill bacteria without the need for antibiotics represents a rapidly growing area of research. However, the optimum design parameters to maximize the bactericidal behavior of such physical features need to be fully identified. The present manuscript provides a systematic review of the bactericidal nanopatterned surfaces. Identifying the effective range of dimensions in terms of height, diameter, and interspacings, as well as covering their impact on mammalian cells, has enabled a comprehensive discussion including the bactericidal mechanisms and the factors controlling the bactericidal efficiency. Overall, this review helps the readers have a better understanding of the state-of-the-art in the design of bactericidal nanopatterns, serving as a design guideline and contributing to the design of future experimental studies.
Collapse
|
9
|
Viela F, Navarro-Baena I, Hernández JJ, Osorio MR, Rodríguez I. Moth-eye mimetic cytocompatible bactericidal nanotopography: a convergent design. BIOINSPIRATION & BIOMIMETICS 2018; 13:026011. [PMID: 29350201 DOI: 10.1088/1748-3190/aaa903] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/10/2023]
Abstract
The rapid emergence of antibiotic resistant bacteria has prompted the need for radically different approaches to combat bacterial infections. Among these, bioinspired surface topographies have emerged as an effective sustainable strategy to deter bacterial infection. This study demonstrates the bactericidal activity and cytocompatibility of the moth-eye mimetic topography produced by thermal polymer nanoimprinting. The moth-eye topography was found to have bactericidal capabilities against Gram negative and Gram positive bacteria. Electron microscopy imaging revealed the bactericidal effect caused by mechanical rupture of the bacteria wall inflicted by the topography on the adhered cells. The cytocompatibility of the surfaces was evidenced by assessing the proliferation and morphology of keratinocytes cultured on the nanotopography. The technology meets important needs in medical implant technology for materials that not only have good biocompatibility but also antibacterial properties for reducing the risk of infections and related health complications.
Collapse
Affiliation(s)
- Felipe Viela
- Madrid Institute for Advanced Studies in Nanoscience (IMDEA Nanoscience), C/Faraday 9, Ciudad Universitaria de Cantoblanco, Madrid 28049, Spain
| | | | | | | | | |
Collapse
|
10
|
Even C, Marlière C, Ghigo JM, Allain JM, Marcellan A, Raspaud E. Recent advances in studying single bacteria and biofilm mechanics. Adv Colloid Interface Sci 2017; 247:573-588. [PMID: 28754382 DOI: 10.1016/j.cis.2017.07.026] [Citation(s) in RCA: 29] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/07/2017] [Revised: 07/18/2017] [Accepted: 07/18/2017] [Indexed: 12/15/2022]
Abstract
Bacterial biofilms correspond to surface-associated bacterial communities embedded in hydrogel-like matrix, in which high cell density, reduced diffusion and physico-chemical heterogeneity play a protective role and induce novel behaviors. In this review, we present recent advances on the understanding of how bacterial mechanical properties, from single cell to high-cell density community, determine biofilm tri-dimensional growth and eventual dispersion and we attempt to draw a parallel between these properties and the mechanical properties of other well-studied hydrogels and living systems.
Collapse
|
11
|
James SA, Hilal N, Wright CJ. Atomic force microscopy studies of bioprocess engineering surfaces - imaging, interactions and mechanical properties mediating bacterial adhesion. Biotechnol J 2017; 12. [PMID: 28488793 DOI: 10.1002/biot.201600698] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2016] [Revised: 03/24/2017] [Accepted: 04/10/2017] [Indexed: 12/19/2022]
Abstract
The detrimental effect of bacterial biofilms on process engineering surfaces is well documented. Thus, interest in the early stages of bacterial biofilm formation; in particular bacterial adhesion and the production of anti-fouling coatings has grown exponentially as a field. During this time, Atomic force microscopy (AFM) has emerged as a critical tool for the evaluation of bacterial adhesion. Due to its versatility AFM offers not only insight into the topographical landscape and mechanical properties of the engineering surfaces, but elucidates, through direct quantification the topographical and biomechnical properties of the foulants The aim of this review is to collate the current research on bacterial adhesion, both theoretical and practical, and outline how AFM as a technique is uniquely equipped to provide further insight into the nanoscale world at the bioprocess engineering surface.
Collapse
Affiliation(s)
- Sean A James
- Biomaterials, Biofouling and Biofilms Engineering Laboratory (B3EL, System and Process Engineering Center, College of Engineering, Swansea University, Fabian Way, Swansea, SA1 8EN, UK
| | - Nidal Hilal
- Centre for Water Advanced Technologies and Environmental Research (CWATER), College of Engineering, Swansea University, Fabian Way, Swansea, SA1 8EN, UK
| | - Chris J Wright
- Biomaterials, Biofouling and Biofilms Engineering Laboratory (B3EL, System and Process Engineering Center, College of Engineering, Swansea University, Fabian Way, Swansea, SA1 8EN, UK
| |
Collapse
|