Dual-emission ciprofloxacin-gold nanoclusters enable ratiometric sensing of Cu2+, Al3+, and Hg2

An innovative triple optical sensor is presented that utilizes gold nanoclusters (GNCs) stabilized with ciprofloxacin (CIP) and bovine serum albumin (BSA). The sensor is designed to identify three critical metal ions, namely Cu2+, Al3+, and Hg2+. Under 360 nm excitation, the synthesized CIP-BSA-GNCs demonstrate dual fluorescence emission with peaks at 448 nm (blue) and 612 nm (red). The red emission is associated with the interior of the CIP-BSA-GNCs, whereas the blue emission results from the surface-bound CIP molecules. The sensitive and selective fluorescent nanosensor CIP-BSA-GNCs were employed to detect Cu2+, Al3+, and Hg2+ ions. Cu2+ effectively quenched the fluorescence intensity of the CIP-BSA-GNCs at both peaks via the internal charge transfer mechanism (ICT). Cu2+ could be detected within the concentration range 1.13 × 10-3 to 0.05 µM, with a detection limit of 0.34 nM. Al3+ increased the intensity of CIP fluorescence at 448 nm via the chelation-induced fluorescence enhancement mechanism. The fluorescence intensity of the core CIP-BSA-GNCs at 612 nm was utilized as a reference signal. Thus, the ratiometric detection of Al3+ succeeded with a limit of detection of 0.21 nM within the dynamic range 0.69 × 10-3 to 0.07 µM. Hg2+ effectively quenched the fluorescence intensity of the CIP-BSA-GNCs at 612 nm via the metallophilic interaction mechanism. The fluorescence intensity of CIP molecules at 448 nm was utilized as a reference signal. This allowed for the ratiometric detection of Hg2+ with a detection limit of 0.7 nM within the concentration range 2.3 × 10-3 to 0.1 µM.

Combining nitric oxide and calcium sensing for the detection of endothelial dysfunction

Cardiovascular diseases are the leading cause of death worldwide and are not typically diagnosed until the disease has manifested. Endothelial dysfunction is an early, reversible precursor in the irreversible development of cardiovascular diseases and is characterized by a decrease in nitric oxide production. We believe that more reliable and reproducible methods are necessary for the detection of endothelial dysfunction. Both nitric oxide and calcium play important roles in the endothelial function. Here we review different types of molecular sensors used in biological settings. Next, we review the current nitric oxide and calcium sensors available. Finally, we review methods for using both sensors for the detection of endothelial dysfunction.

A Reversible Optical Sensor Film for Mercury Ions Discrimination Based on Isoxazolidine Derivative and Exhibiting pH Sensing

We developed a new optical sensor for tracing Hg(II) ions. The detection affinity examines within a concentration range of 0-4.0 µM Hg(II). The sensor film is based on Methyl 2-hydroxy-3-(((2S,2'R,3a'S,5R)-2-isopropyl-5,5'-dimethyl-4'-oxotetrahydro-2'H-spiro[cy-clohexane-1,6'-im-idazo[1,5-b]isoxazol]-2'-yl)methyl)-5-methylbenzoate (IXZD). The novel synthesized compound could be utilized as an optical turn-on chemosensor for pH. The emission intensity is highly enhanced for the deprotonated form concerning the protonated form. IXZD probe has a characteristic fluorescence peak at 481 nm under excitation of 351 nm with large Stocks shift of approximately 130 nm. In addition, the binding process of IXZD:Hg(II) presents a 1:1 molar ratio which is proved by the large quench of the 481 nm emission peak of IXZD and the growth of a new emission peak at 399 nm (blue shift). The binding configurations with one Hg(II) cation and its electronic characteristics were investigated by applying the Density Functional Theory (DFT) and the time-dependent DFT (TDDFT) calculations. Density functional theory (DFT) and the time-dependent DFT (TDDFT) theoretical results were provided to examine Hg(II)-IXZD structures and their electronic properties in solution. The developed chemical sensor was offered based on the intramolecular charge transfer (ICT) mechanism. The sensor film has a significantly low limit of detection (LOD) for Hg(II) of 0.025 μM in pH 7.4, with a relative standard deviation RSD_r (1%, n = 3). Lastly, the IXZD shows effective binding affinity to mercury ions, and the binding constant K_b was estimated to be 5.80 × 10⁵ M^-1. Hence, this developed optical sensor film has a significant efficiency for tracing mercury ions based on IXZD molecule-doped sensor film.

Fine-tuning of the pharmacological potential of novel thiazolium ionic liquids by anion alteration

A novel series of thiazolium ionic liquids (TILs) bound to chloride (2a–c), tetrafluoroborate (BF₄) (3a–c), and bis-(trifluoromethanesulfonimide) (Tf₂N) anions (4a–c) was synthesized and their physicochemical characteristics were investigated using various microanalytical techniques. The pharmacological potential of the new TILs was assessed as chemotherapeutic agents for bacterial infections and ovarian cancer (SKOV-3). Notably, ILs with the same cations become more bactericidal upon their binding with the strongest chaotropic anion (TN₂f). The in vitro toxicity of the TILs toward ovarian carcinoma cell lines (SKOV-3) and normal human skin fibroblast cells (HSF) revealed that all tested TILs have the capacity to induce a dose- and time-dependent decline in SKOV-3 cell viability, with Tf₂N-linked TILs (4a–c) having a preferable efficacy. In addition, the new compounds showed excellent selectivity for cancer cells (SKOV-3) over healthy cells (HSF). [ⁱPBzTh][Tf₂N] (4b) is the most cytotoxic and specific one and may act as a promising anti-ovarian cancer agent.

A novel series of thiazolium ionic liquids (TILs) bound to chloride (2a–c), tetrafluoroborate (BF₄) (3a–c), and bis-(trifluoromethanesulfonimide) (Tf₂N) anions (4a–c) was synthesized and their physicochemical characteristics were investigated.

Ionic chitosan Schiff bases supported Pd(II) and Ru(II) complexes; production, characterization, and catalytic performance in Suzuki cross-coupling reactions

Taking the advantage of multifunctional characteristics of chitosan (CS), we have developed new scaffolds (imidazolium-vanillyl-chitosan Schiff bases (IVCSSBs)) for supporting Pd(II) and Ru(II) ions in catalyzing Suzuki coupling reactions. The structures of new materials were described based on their elemental, spectral, thermal, and microscopic analysis. The strong interactions between the binding sites of IVCSSB ligand (OH, H-C=N, and OCH₃ groups) and Pd(II) ions resulted in the formation of an excellent heterogeneous catalyst (Pd(II)IVCSSB1) with amazing catalytic activity (up to 99%) and highly stable in the reaction medium. The reusability experiments for Pd(II)IVCSSB₁ revealed that there is no appreciable decrease in its catalytic activity even after five consecutive operation runs. Furthermore, this heterogeneous catalyst showed an excellent selectivity toward the cross-coupling reaction where no homo-coupling byproducts were observed in the ¹H NMR spectra of the obtained products. Consequently, the present ionic catalytic system may open a new window for a novel generation of ionic bio-based catalysts for organic transformations.

A Highly Selective Turn-on Fluorescent and Naked-eye Colourimetric Dual-channel Probe for Cyanide Anions Detection in Water Samples

A highly selective turn-on fluorescent and naked-eye colourimetric dual-channel probe for cyanide anions (CN-) has been designed and characterized. In the mixed solution (DMSO / H₂O, 9:1, v / v), only CN- could cause an increase in the UV absorption intensity and the corresponding fluorescence intensity increased, and other anions had no significant effect on the probe. After treatment with cyanide in the probe solution, the solution showed a noticeable colour change, from light yellow to purple. Moreover, a fluorescence spectrophotometer can be used to observe that the fluorescence intensity of the solution is significantly enhanced. The response of the colourimetric and fluorescent dual-channel probe to CN- was attributed to nucleophilic addition, and the mechanism was determined by ¹H NMR spectroscopy. In addition, this probe was used to detect CN- in actual water samples, including river water, drinking water, and tap water. The spiked CN- recovery rate is very high (97.2%-100.06%), and analytical precision is also very high (RSD < 2%), which shows its feasibility and reliability for detecting cyanide ions in actual water samples.

Ratiometric ultrasensitive optical chemisensor film based antibiotic drug for Al(III) and Cu(II) detection

Herein, we developed and designed a novel ratiometric optical chemisensor film for determining Al(III) and Cu(II) in low concentration ranges. The chemisensor film consists of (a) antibacterial drug Ciprofloxacin (CPFX) [1-cyclopropyl-6-fluoro1,4-dihydro-4-oxo-7-(piperaziny-l-yl) quinolone-3carboxylic acid] and (b) a reference dye 5,10,15,20- tetrakis (pentafluorophenyl) porphyrin (TFPP) in a polyvinyl chloride (PVC) matrix. PVC was applied as a homogeneous system for mixing CPFX and TFPP. The emission intensity of the CPFX in the PVC matrix varies depending on the concentrations of the Al(III) and Cu(II) ions. When the sensor film is immersed in different Al(III) concentrations, a significant fluorescence enhancement of the CPFX at (427 nm) is observed. Furthermore, the fluorescence intensity of the red emission of the TFPP dye at (644 nm) does not alter. However, in the presence of Cu(II) ions, a considerable emission quenching of the CPFX peak at (427 nm) is observed. PVC provides a great permeability and penetration facilities of dissolved ions that make the sensor film sensitive to Al(III) or Cu(II) changes outside the matrix. The film displays immense sensitivity depending on their distinctive optical characteristics of CPFX and detection capabilities within a low detection limit LOD for Al(III) and Cu(II). The LOD values were estimated to be 2.05 x 10^-7 M and 1.04 x 10^-7 M respectively with a relative standard deviation RSD_r (1%, n=3). Density functional theory (DFT) and the time-dependent DFT (TDDFT) theoretical calculations were performed to study Cu(II) and Al(III) complexation structures and their electronic properties in solution and in the sensor film. The interference of the chemisensor film was examined using different cations and the chemisensor provides significant selectivity. We develop a new ratiometric chemisensor based on PVC polymer film for Al(III) and Cu(II) detection.

A Heparin based dual ratiometric sensor for Thrombin

Thrombin is an important enzyme that plays a pivotal role in the blood clotting pathways. An imbalance in the activity of this enzyme is clinically known to be associated with various diseases, such as thrombosis, inflammation, atherosclerosis, and haemophilia, suggesting the need to devise sensors for Thrombin detection. However, the majority of the fluorescence-based Thrombin assays rely on fluorescence labelling assays or Thrombin specific recognition biomolecules, such as, aptamers or antibody which requires sophisticated techniques and makes it very expensive. Herein, we report a simple, selective, sensitive and label-free fluorescence detection scheme for Thrombin which is based on the interaction between Thrombin and a fluorescent complex of Heparin with a molecular rotor dye, Thioflavin-T. The detection scheme exploits selective interaction between cationic Thrombin and anionic Heparin to modulate the monomer-aggregate equilibrium of the Thioflavin-T-Heparin system. Importantly, the present system offers a ratiometric response that has the ability for robust quantification of Thrombin concentration even in complex medium. The involvement of all commercially available components is a crucial advantage of this detection scheme. Further, the detection scheme also shows reasonable response in diluted serum matrix.

Exploration of fluorescence behavior of an imidazolium-based chemosensor in solution and in the solid state and its turn-on response to Al3+ in pure aqueous medium

An imidazolium-based quinoline framework is constructed, and its fluorescence behaviour studies with fluorescence turn-on chemosensory response to the selective detection of Al³⁺ in aqueous medium are discussed in detail.

Design and Applications of Small Molecular Probes for Calcium Detection

The physiological significance of calcium ions such as the role in cellular signalling, cell growth, etc. have driven the development of methods to detect and monitor the level of Ca²⁺ ions, both in vivo and in vitro. Although various approaches for the detection of calcium ions have been reported, methods based on small molecular fluorescent probes have unique advantages including small probe size, easy monitoring of detection processes and applicability in biological systems. In this review article, we will discuss the progress in the development of Ca²⁺ -binding fluorescent probes by taking into account the types of chelating groups that have been employed for Ca²⁺ binding.

Ultrasensitive Optical Chemosensor for Cu(II) Detection

Herein, the main objective of this research is to design and synthesize a novel optical chemosensor, 2,6-Bis(4-dimethylaminophenyl)-4-(dicyanomethylene)-cyclohexane-1,1-dicarbo-nitrile (BDC), for detection of one of the most significant metal ions Cu(II). This novel fluorescent chemosensor exhibits unique optical properties with large Stokes shift (about 170 nm) approximately. The fluorescence and UV–vis absorption performance among the BDC probe and Cu(II) ions were examined in 1:9 (v/v) methanol–HEPES buffer (pH = 7.2) solution. Also, BDC displays high selectivity for Cu(II) concerning other cations. Moreover, this probe provides high selectivity and sensitivity based on their fluorescence properties and recognition abilities within a detection limit of the Cu(II) contents (LOD 2.3 x 10⁻⁷ M). The suggested mechanism of BDC sensor is attributed to the chelation process with Cu(II), to establish a 1:1 metal-ligand ratio complex with a binding constant (K_bind = 7.16 x 10⁴ M⁻¹). The detection process is accompanied by quenching the main emission peak of the BDC at 571 nm. All the experimental data were collected to investigate the effects of several important parameters such as reversibility and the concentration limits. Besides, we study the interference of various metal ions on selectivity and detection capacity of this significant Cu (II) ion. This novel chemosensor shows ultrasensitive, fast tracing of Cu(II) in the physiological pH range (pH 7.2) and therefore may propose a novel promising method for the investigation of the biological functions of Cu(II) in living cells.

Novel chemical sensor for detection Ca(II) ions based on ferutinin

A new optical chemical sensor based on medicinal compound, jaeschkeanadiol p-hydroxyben-zoate (Ferutinin), has been designed and utilized for Ca(II) ions detections. This natural optical sensor exhibits immense selectivity including fluorescence and absorption ratiometric for Ca(II) ions within precious physiological pH range. Further, the chelation process of the Ca(II) ions with the medicinal optical sensor ferutinin yields a 1:1 (metal: ligand) complex which is accompanied by fluorescence enhancement of the main emission band centered at 355 nm of the medicinal probe. The fluorescence "turn-on" effect is a clear evidence for the chelation process between ferutinin medicinal probe and Ca(II) ions and this could be simply detected. The new sensor was proposed depending on significant fluorescence mechanism, (MLCT, metal-ligand charge transfer). However, the interaction of the medicinal optical sensor with Ca(II) in presence of other cations was examined without any significant interference. Also, the new developed optical sensor consecutively exhibits low limit of detection (LOD) 1.5 nM for Ca(II) which is detected in very significant physiological pH range (pH = 7.4). Also, the probe provides high binding affinity towards Ca(II) with large binding constant K_b 5.97 × 10⁴ M^-1. As a result, this optical sensor may apply for detection Ca(II) in cell or biological samples.

Turn-on pH nano-fluorosensor based on imidazolium salicylaldehyde ionic liquid-labeled silica nanoparticles

A turn-on pH nano-fluorosensor based on a new probe labeled SiNPs was designed. The new probe is based on ESIPT process for Sal bearing 2-MeIm ionic liquid terminal. The pH sensing performance of the nanosensor has been investigated.