Single-step fabrication of surface morphology tuned iron oxide anchored highly porous carbon nanotube hybrid foam for a highly stable supercapacitor electrode

The pseudocapacitive metal oxide anchored nanocarbon-based three-dimensional (3D) materials are considered attractive electrode materials for high-performance supercapacitor applications. However, the complex multistep synthesis approaches raise production costs and act as a major barrier to the practical real-world field. To overcome this limitation, in this study, an easily scalable and effective fabrication approach for the development of iron oxide (Fe₃O₄) anchored highly porous carbon nanotube hybrid foam (f-Fe₃O₄/O-CNTF) with micro/mesoporous structure was suggested to improve the durability and energy storage performance. The surface morphology-tuned f-Fe₃O₄/O-CNTF (f-Fe₃O₄/O-CNTF(M)) was fabricated through electromagnetic interaction between the anchored magnetic Fe₃O₄ on the CNT surface and the applied magnetic field. The obtained results clearly demonstrated that the changed surface morphology of the f-Fe₃O₄/O-CNTF(M) strongly affected the meso- and micropore structure, electrochemical performance, and durability. Consequently, the f-Fe₃O₄/O-CNTF(M) showed an almost 120% enhanced specific surface area and nearly 1.9 times increased specific capacitance compared to that of the f-Fe₃O₄/O-CNTF. Furthermore, the changed surface morphology successfully prevented the re-aggregation of the initial structure and significantly improved durability. As a result, f-Fe₃O₄/O-CNTF(M) showed outstanding cycling stability, maintaining almost 100% capacitance retention after 14,000 cycles. Consequently, the assembled symmetric supercapacitor device delivered an energy density of 20.1 Wh·kg^-1 at a power density of 0.37 kW·kg^-1 with good cycling stability. These results suggest that the f-Fe₃O₄/O-CNTF(M) can potentially be used as an electrode for supercapacitors with good durability.

Recent Trends in Carbon Nanotube Electrodes for Flexible Supercapacitors: A Review of Smart Energy Storage Device Assembly and Performance

In order to upgrade existing electronic technology, we need simultaneously to advance power supply devices to match emerging requirements. Owing to the rapidly growing wearable and portable electronics markets, the demand to develop flexible energy storage devices is among the top priorities for humankind. Flexible supercapacitors (FSCs) have attracted tremendous attention, owing to their unrivaled electrochemical performances, long cyclability and mechanical flexibility. Carbon nanotubes (CNTs), long recognized for their mechanical toughness, with an elastic strain limit of up to 20%, are regarded as potential candidates for FSC electrodes. Along with excellent mechanical properties, high electrical conductivity, and large surface area, their assemblage adaptability from one-dimensional fibers to two-dimensional films to three-dimensional sponges makes CNTs attractive. In this review, we have summarized various assemblies of CNT structures, and their involvement in various device configurations of FSCs. Furthermore, to present a clear scenario of recent developments, we discuss the electrochemical performance of fabricated flexible devices of different CNT structures and their composites, including additional properties such as compressibility and stretchability. Additionally, the drawbacks and benefits of the study and further potential scopes are distinctly emphasized for future researchers.

A Hierarchically Tailored Wrinkled Three-Dimensional Foam for Enhanced Elastic Supercapacitor Electrodes

Recently, three-dimensional (3D) porous foams have been studied, but further improvement in nanoscale surface area and stretchability is required for electronic and energy applications. Herein, a general strategy is reported to form a tailored wrinkling structure on strut surfaces inside a 3D polydimethylsiloxane (PDMS) polymeric foam. Controlled wrinkles are created on the struts of 3D foam through an oxygen plasma treatment to form a bilayer surface of PDMS on uniaxially prestretched 3D PDMS foam, followed by relaxation. After plasma treatment for 1 h and prestretching of 40%, the wrinkled 3D foam greatly improves specific surface area and stretchability by over 60% and 75%, respectively, compared with the pristine 3D PDMS foam. To prove its applicability with improved performances, supercapacitors are prepared by coating a conductive material on the wrinkled 3D foam. The resulting supercapacitors exhibit an increased storage capacity (8.3 times larger), maintaining storage capacity well under stretching up to 50%.

Recent Advances on Properties and Utility of Nanomaterials Generated from Industrial and Biological Activities

Today is the era of nanoscience and nanotechnology, which find applications in the field of medicine, electronics, and environmental remediation. Even though nanotechnology is in its emerging phase, it continues to provide solutions to numerous challenges. Nanotechnology and nanoparticles are found to be very effective because of their unique chemical and physical properties and high surface area, but their high cost is one of the major hurdles to its wider application. So, the synthesis of nanomaterials, especially 2D nanomaterials from industrial, agricultural, and other biological activities, could provide a cost-effective technique. The nanomaterials synthesized from such waste not only minimize pollution, but also provide an eco-friendly approach towards the utilization of the waste. In the present review work, emphasis has been given to the types of nanomaterials, different methods for the synthesis of 2D nanomaterials from the waste generated from industries, agriculture, and their application in electronics, medicine, and catalysis.

High Electrochemical Performance Silicon Thin-Film Free-Standing Electrodes Based on Buckypaper for Flexible Lithium-Ion Batteries

Recently, applications for lithium-ion batteries (LIBs) have expanded to include electric vehicles and electric energy storage systems, extending beyond power sources for portable electronic devices. The power sources of these flexible electronic devices require the creation of thin, light, and flexible power supply devices such as flexile electrolytes/insulators, electrode materials, current collectors, and batteries that play an important role in packaging. Demand will require the progress of modern electrode materials with high capacity, rate capability, cycle stability, electrical conductivity, and mechanical flexibility for the time to come. The integration of high electrical conductivity and flexible buckypaper (oxidized Multi-walled carbon nanotubes (MWCNTs) film) and high theoretical capacity silicon materials are effective for obtaining superior high-energy-density and flexible electrode materials. Therefore, this study focuses on improving the high-capacity, capability-cycling stability of the thin-film Si buckypaper free-standing electrodes for lightweight and flexible energy-supply devices. First, buckypaper (oxidized MWCNTs) was prepared by assembling a free stand-alone electrode, and electrical conductivity tests confirmed that the buckypaper has sufficient electrical conductivity (10-4(S m-1) in LIBs) to operate simultaneously with a current collector. Subsequently, silicon was deposited on the buckypaper via magnetron sputtering. Next, the thin-film Si buckypaper freestanding electrodes were heat-treated at 600 °C in a vacuum, which improved their electrochemical performance significantly. Electrochemical results demonstrated that the electrode capacity can be increased by 27/26 and 95/93 μAh in unheated and heated buckypaper current collectors, respectively. The measured discharge/charge capacities of the USi_HBP electrode were 108/106 μAh after 100 cycles, corresponding to a Coulombic efficiency of 98.1%, whereas the HSi_HBP electrode indicated a discharge/charge capacity of 193/192 μAh at the 100th cycle, corresponding to a capacity retention of 99.5%. In particular, the HSi_HBP electrode can decrease the capacity by less than 1.5% compared with the value of the first cycle after 100 cycles, demonstrating excellent electrochemical stability.

Advanced biomedical applications of carbon nanotube

With advances in nanotechnology, the applications of nanomaterial are developing widely and greatly. The characteristic properties of carbon nanotubes (CNTs) make them the most selective candidate for various multi-functional applications. The greater surface area of the CNTs in addition to the capability to manipulate the surfaces and dimensions has provided greater potential for this nanomaterial. The CNTs possess greater potential for applications in biomedicine due to their vital electrical, chemical, thermal, and mechanical properties. The unique properties of CNT are exploited for numerous applications in the biomedical field. They are useful in both therapeutic and diagnostic applications. They form novel carrier systems which are also capable of site-specific delivery of therapeutic agents. In addition, CNTs are of potential application in biosensing. Many recently reported advanced systems of CNT could be exploited for their immense potential in biomedicine in the future.

3D Heteroatom-Doped Carbon Nanomaterials as Multifunctional Metal-Free Catalysts for Integrated Energy Devices

Sustainable and cost-effective energy generation has become crucial for fulfilling present energy requirements. For this purpose, the development of cheap, scalable, efficient, and reliable catalysts is essential. Carbon-based heteroatom-doped, 3D, and mesoporous electrodes are very promising as catalysts for electrochemical energy conversion and storage. Various carbon allotropes doped with a variety of heteroatoms can be utilized for cost-effective mass production of electrode materials. 3D porous carbon electrodes provide multiple advantages, such as large surface area, maximized exposure to active sites, 3D conductive pathways for efficient electron transport, and porous channels to facilitate electrolyte diffusion. However, it is challenging to synthesize and functionalize isotropic 3D carbon structures. Here, various synthesis processes of 3D porous carbon materials are summarized to understand how their physical and chemical properties together with heteroatom doping dictate the electrochemical catalytic performance. Prospects of attractive 3D carbon structural materials for energy conversion and efficient integrated energy systems are also discussed.

Computational Approach To Reveal the Structural Stability and Electronic Properties of Lithiated M/CNT (M = Si, Ge) Nanocomposites as Anodes for Lithium-Ion Batteries

This work is motivated to explore the structural stability and electronic and electrochemical properties of nanocomposites of M₄Li _n (M = Si and Ge)-carbon nanotube (CNT) by employing first-principles density functional theory calculations. By analyzing the structural stability of various M₄Li _n (n = 0-10) clusters, it is revealed that a tetrahedron-shaped M₄Li₄ Zintl cluster is found to be highly stable. Our study on the interaction between the lithiated clusters and CNT illustrates that the charge transfer from the former to latter plays a pivotal role in stabilizing these nanocomposites. The structural stability of those nanocomposites arises as a consequence of bonding between lithiated clusters and CNT, which is mediated through the cation-π interaction. The strength of the interaction between them is well reflected in electronic structure calculations by shifting the energy levels with respect to the Fermi energy. Further, the electrochemical properties of these nanocomposites are explored by forming an assembly of the cluster-inserted CNT. The calculated average intercalation voltage of the systems is found to be low (maximum ∼1.0 V for M = Si and 1.05 V for M = Ge), which demonstrates their anodic behavior.

Spray-Printed and Self-Assembled Honeycomb Electrodes of Silicon-Decorated Carbon Nanofibers for Li-Ion Batteries

Directional, micron-scale honeycomb pores in Li-ion battery electrodes were fabricated using a layer-by-layer, self-assembly approach based on spray-printing of carbon nanofibers. By controlling the drying behavior of each printed electrode layer through optimization of (i) the volume ratio of fugitive bisolvent carriers in the suspension and (ii) the substrate temperature during printing, self-assembled, honeycomb pore channels through the electrode were created spontaneously and reliably on current collector areas larger than 20 cm × 15 cm. The honeycomb pore structure promoted efficient Li-ion dynamics at high charge/discharge current densities. Incorporating an optimum fraction (2.5 wt %) of high-energy-density Si particulate into the honeycomb electrodes provided a 4-fold increase in deliverable discharge capacity at 8000 mA/g. The spray-printed, honeycomb pore electrodes were then investigated as negative electrodes coupled with similar spray-printed LiFePO₄ positive electrodes in a full Li-ion cell configuration, providing an approximately 50% improvement in rate capacity retention over half-cell configurations of identical electrodes at 4000 mA/g.

Electrochemical properties of a silicon nanoparticle/hollow graphite fiber/carbon coating composite as an anode for lithium-ion batteries

Hollow graphite fibers and carbon coating were applied to improve lithium storage and cycling performance of silicon nanoparticles.