A study on a broadband photodetector based on hybrid 2D copper oxide/reduced graphene oxide

These days, photodetectors are a crucial part of optoelectronic devices, ranging from environmental monitoring to international communication systems. Therefore, fabricating these devices at a low cost but obtaining high sensitivity in a wide range of wavelengths is of great interest. This report introduces a simple solution-processed hybrid 2D structure of CuO and rGO for broadband photodetector applications. Particularly, 2D CuO acts as the active material, absorbing light to generate electron-hole pairs, while 2D rGO plays the role of a transport layer, driving charge carriers between two electrodes. Our device exhibits remarkable sensitivity to a wide wavelength range from 395 nm to 945 nm (vis-NIR region). Interestingly, our devices' responsivity and photoconductive gain were calculated (under 395 nm wavelength excitation) to be up to 8 mA W-1 and 28 fold, respectively, which are comparable values with previous publications. Our hybrid 2D structure between rGO and CuO enables a potential approach for developing low-cost but high-performance optoelectronic devices, especially photodetectors, in the future.

Electrocatalytic Platform Based on Silver-Doped Sugar Apple-like Cupric Oxide Embedded Functionalized Carbon Nanotubes for Nanomolar Detection of Acetaminophen (APAP)

Economical and nanomolar-level determination of the analgesic drug, acetaminophen (APAP), is reported in this work. A novel ternary nanocomposite based on silver-doped sugar apple-like cupric oxide (CuO)-decorated amine-functionalized multi-walled carbon nanotubes (fCNTs) was sonochemically prepared. CuO nanoparticles were synthesized based on the ascorbic acid-mediated low-temperature method, and sidewall functionalization of CNTs was carried out. Important characterizations of the synthesized materials were analyzed using SEM, TEM, HAADF-STEM, elemental mapping, EDX, lattice fringes, SAED pattern, XRD, EIS, UV-Vis, micro-Raman spectroscopy, and FTIR. It was noted the sonochemically prepared nanocomposite diligently fabricated on screen-printed carbon electrode showcased outstanding electrocatalytic performance towards APAP determination. The APAP sensor exhibited ultra-low limit of detection of 4 nM, wide linear concentration ranges of 0.02-3.77 and 3.77-90.02 μM, and high sensitivity of 30.45 μA μM^-1 cm^-2. Moreover, further evaluation of the sensor's performance based on electrochemical experiments showcased outstanding selectivity, stability, reproducibility, and repeatability. Further, excellent practical feasibility of the proposed APAP sensor was affirmed with excellent recovery larger than 96.86% and a maximum RSD of 3.67%.

High efficiency solar desalination and dye retention of plasmonic/reduced graphene oxide based copper oxide nanocomposites

Water desalination via solar-driven interfacial evaporation is one of the most essential technologies to limit the problem of global freshwater scarcity. Searching for a highly efficient, stable, eco-friendly, and cost-effective solar-absorber material that can collect the full solar spectrum is critically important for solar steam generation. This study reports the development of a new solar thermal evaporation system based on plasmonic copper oxide/reduced graphene oxide (rGO). The silver nanoparticles in the composite exhibit a very strong solar absorption. Also, rGO and CuO nanoparticles offer excellent thermal absorptivity. Polyurethane was used as the support and as a thermal insulator. Moreover, filter paper was used for fast water delivery to the surface of the solar absorber. Ag/CuO-rGO nanocomposite is manifested to be one of the most efficient solar-absorbers reported to date for solar desalination which exhibits an average 2.6 kg m-2 h-1 evaporation rate with solar thermal efficiency up to 92.5% under 1 sun irradiation. Furthermore, the composite has excellent stability and durability as it displays stable evaporation rates for more than 10 repeated cycles in use, with no significant decrease in the activity. Besides, the successful removal of various organic dyes from contaminated water is also revealed, resulting in the production of clean condensed freshwater. Finally, this work commences a new avenue of synthesizing cost-effective thermal absorbers based on metal oxides.

Core-Double-Shell Fe2O3@SiO2@Jarosite Hybrid Nanoparticles Synthesized by Laser Ablation of Turquoise in Ethanol

This work highlights a facile green route for the one-step synthesis of iron oxide core-double-shell nanoparticles (NPs) and aluminum phosphide (AlP) nanosheets by pulsed laser ablation of the mineral turquoise target from Nishapur in the presence of an ethanol solvent. High-resolution transmission electron microscopy, selected-area electron diffraction pattern, and field emission scanning electron microscopy (FESEM) in combination with energy-dispersive X-ray mapping revealed the formation of NPs with a typical core@double-shell structure in which crystalline α-Fe₂O₃ (iron oxide) formed the core, while SiO₂ (quartz) and (K, H₃O)Fe₃(SO₄)₂(OH₆) (jarosite) participated as the inner and outer shell, respectively. However, the application of laser ablation on the turquoise phase of the target led to the formation of AlP nanosheets which was confirmed by the X-ray diffraction patterns and FESEM images. Strong absorption of the vein-ablated species in the UV region (250-360 nm) was the characteristic feature of α-Fe₂O₃ and jarosite phases, while the absorption band at 250-300 nm for the turquoise-ablated species was related to the presence of Cu compound species and also the α-Fe₂O₃ phase in the sample. Photoluminescence emission spectra for the vein-ablated species depicted a peak centered at 370 nm, while a peak located at 364 nm was ascribed to the turquoise-ablated species. In particular, these hybrid NPs with high purity and stability may offer new opportunities for bio-applications such as anticancer agents and water/wastewater applications.

Copper fluorapatite assisted synthesis of new 1,2,3-triazoles bearing a benzothiazolyl moiety and their antibacterial and anticancer activities

New 1,2,3-triazoles with a benzothiazolyl scaffold have been synthesized for the first time using copper fluorapatite as a catalyst and their antibacterial and anticancer activities are reported.

pH-Responsive Hybrid Hydrogels as Antibacterial and Drug Delivery Systems

This study describes the design and synthesis of organic⁻inorganic hybrid hydrogels based on an interpenetrating polymer network (IPN) composed of polyaspartic acid crosslinked by graphene nanosheets as the primary network and poly(acrylamide-co-acrylic acid) as the secondary network. Silver, copper oxide, and zinc oxide nanoparticles were formed within the gel matrix, and the obtained hydrogel was applied to a load and controlled release of curcumin. The loading of curcumin and the release of this drug from the gels depended on the nanoparticle's (NP's) content of hydrogels as well as the pH of the medium. The synthesized hydrogels showed antibacterial activity against E. coli and S. aureus bacteria. The ability of the synthesized hydrogels to incapacitate bacteria and their loading capacity and controlled release of curcumin qualify them for future therapies such as wound-dressing applications.