Reactive membranes for groundwater remediation of chlorinated aliphatic hydrocarbons: competitive dechlorination and cost aspects

A nanocomposite membrane incorporating reactive Pd-Fe nanoparticles (NPs) was developed to remediate chlorinated aliphatic hydrocarbons (CAHs) from groundwater. Other than recapturing the produced Fen+ for in-situ regeneration, the functionalized polyanions prevented NPs agglomeration and resulting in a spherical Fe0 core (55 nm, O/Fe = 0.05) and an oxidized shell (4 nm, O/Fe = 1.38). The reactive membranes degraded 92% of target CAHs with a residence time of 1.7 seconds. After long-term treatment and regeneration, reusability was confirmed through recovered reactivity, recurrence of Fe0 in X-ray photoelectron spectroscopy, and >96% remaining of Fe and Pd. The total cost (adjusted present value for 20 years) was estimated to be 13.9% lower than the granular activated carbon system, following an EPA work breakdown structure-based cost model. However, non-target CAHs from groundwater can compete for active sites, leading to decreased surface-area normalized dechlorination rate ( k sa ) by 28.2-79.9%. A hybrid nanofiltration (NF)/reactive membrane was proposed to selectively intercept larger competitors, leading to 54% increased dechlorination efficiency and 1.3 to 1.9-fold enlarged k sa . Overall, the practical viability of the developed reactive membranes was demonstrated by the stability, reusability, and cost advantages, while the optional NF strategy could alleviate competitive degradation towards complex water chemistry.

Advances in metal(loid) oxyanion removal by zerovalent iron: Kinetics, pathways, and mechanisms

Metal(loid) oxyanions in groundwater, surface water, and wastewater can have harmful effects on human or ecological health due to their high toxicity, mobility, and lack of degradation. In recent years, the removal of metal(loid) oxyanions using zerovalent iron (ZVI) has been the subject of many studies, but the full scope of this literature has not been systematically reviewed. The main elements that form metal(loid) oxyanions under environmental conditions are Cr(VI), As(V and III), Sb(V and III), Tc(VII), Re(VII), Mo(VI), V(V), etc. The removal mechanisms of metal(loid) oxyanions by ZVI may involve redox reactions, adsorption, precipitation, and coprecipitation, usually with one of these mechanisms being the main reaction pathway and the other playing auxiliary roles. However, the removal mechanisms are coupled to the reactions involved in corrosion of Fe(0) and reaction conditions. The layer of iron oxyhydroxides that forms on ZVI during corrosion mediates the sequestration of metal(loid) oxyanions. This review summarizes most of the currently available data on mechanisms and performance (e.g., kinetics) of removal of the most widely studies metal(loid) oxyanion contaminants (Cr, As, Sb) by different types of ZVI typically used in wastewater treatment, as well as ZVI that has been sulfidated or combination with catalytic bimetals.

A Polymeric Composite Material (rGO/PANI) for Acid Blue 129 Adsorption

Over the years, polyaniline (PANI) has received enormous attention due to its unique properties. Herein, it was chosen to develop a new polymeric composite material: reduced graphene oxide/polyaniline (rGO/PANI). The composite was prepared by a simple and cost-effective fabrication method of formation by mixing and sonication in various conditions. The obtained materials were characterized and identified using various techniques such as scanning electron microscopy (SEM), Raman and ATR–FTIR spectroscopy, and X-ray diffraction (XRD). The objective of the paper was to confirm its applicability for the removal of contaminants from water. Water could be contaminated by various types of pollutants, e.g., inorganics, heavy metals, and many other industrial compounds, including dyes. We confirmed that the Acid Blue 129 dyes can be substantially removed through adsorption on prepared rGO/PANI. The adsorption kinetic data were modeled using the pseudo-first-order and pseudo-second-order models and the adsorption isotherm model was identified.

Zero-valent iron-manganese bimetallic nanocomposites catalyze hypochlorite for enhanced thallium(I) oxidation and removal from wastewater: Materials characterization, process optimization and removal mechanisms

Nano zero-valent metals adsorption coupled with advanced oxidation for environmental pollutants removal has been gaining attention recently. In this study, zero-valent iron-manganese (nZVIM) bimetallic nanocomposites were prepared via one-pot borohydride reduction and coupled with hypochlorite (ClO^-) oxidation for enhanced thallium (Tl) removal from wastewater. Amorphous nZVIM nanoparticles were successfully synthesized, with a specific surface area of 106.89 m²/g, and a saturation magnetization of 65.16 emu/g. In comparison with the nZVIM adsorption or ClO^- oxidation alone, the hybrid nZVIM/ClO^- process achieved much faster Tl(I) removal rate over a wide pH range from 6 to 10. Maximum Tl(I) removal capacity was as high as 990.0 mg/g. The oxidation-induced adsorption for Tl(I) removal well followed the pseudo-first kinetic order model. Stable and effective adsorbent regeneration was achieved during the cyclic adsorption-desorption tests. This process also had high resistance to the interference of external cations, can act as an effective pretreatment for Tl(I) removal from the actual saline industrial wastewater. The main mechanisms for Tl(I) removal were found to be oxidation, surface precipitation, pore retention, and surface complexation. The nZVIM coupled with ClO^- approach has great potential for Tl(I) removal from wastewater, and its application in other fields is highly anticipated.

Production of electrospun nanofibers based on graphene oxide/gum Arabic

Over the last few years, the electrospinning technique has attracted significant attention for the production of novel nanofibrous materials. At the same time, the use of graphene oxide and the natural products extracted from plants and/or trees have become very popular in various fields of science. In this work, a new method for the production of nanofibers based on a combination of Gum Arabic (GA), as a natural tree gum exudate, PVA, as an environmentally-friendly stabilizer, and graphene oxide (GO) has been developed and characterized. SEM analysis showed fundamental differences on the surface of bare nanofibers with and without GO, and also significantly smaller fiber diameters in the case of the presence of GO (fibers <100 nm present). Raman spectroscopy confirmed and TGA analysis approximated the content of GO in the nanofibers. Adsorption of methylene blue on the produced nanofibrous membrane was about 50% higher in the presence of GO, which opens the possibility to use GO/GA/PVA fibers in several applications, for example for the removal of dyes.

Highly selective determination of ultratrace inorganic arsenic species using novel functionalized miniaturized membranes

A simple method for highly selective determination of trace and ultratrace arsenic ions, i.e. arsenite and arsenate, was developed. The method is based on new miniaturized membranes, 5 mm diameter and 4.4 mg weight, which are prepared by synthesis of amorphous silica coating on cellulose fibers followed by the modification with (3-mercaptopropyl)-trimethoxysilane. The batch adsorption experiments show that membranes have high selectivity toward arsenite in the presence of heavy metals and anions that usually exist in natural water. Arsenite can be quantitatively adsorbed at pH 1 from 50 mL sample within 60 min using the miniaturized membrane with maximum adsorption capacity of 60 mg g^-1. The excellent adsorptive properties of membranes open the path to simple and selective determination of trace and ultratrace arsenite in water. Moreover, the membranes can be applied in the arsenic speciation due to their selectivity toward arsenite in the presence of arsenate. After adsorption, the arsenite retained onto the membrane is directly measured by energy-dispersive X-ray fluorescence spectrometry, avoiding elution step usually required in other spectroscopy techniques. The method is characterized by excellent enrichment factor of 972, detection limit of 0.045 ng mL^-1 and can be successfully applied in analysis of high salinity water, which is difficult to analyze by other spectroscopy techniques. The proposed method is a solvent-free approach based on the use of miniaturized membranes as sorbent followed by the direct measurement using a low-power X-ray spectrometer without either elution step or gas consumption during measurement. It can be considered as environmentally friendly and meets the standards of green analytical chemistry principles.