Wetting against the nap - how asperity inclination determines unidirectional spreading

Compositional-Asymmetry-Induced Transition of Directional Liquid Transport on Tilted and Janusian Nanohair Arrays

Anisotropic wetting on certain surfaces endowed with structural asymmetry or compositional gradients commonly impedes the directional adjustment of liquid transport. We report here that directional liquid transport (DLT) against the tilt direction of nanohair and in the reverse direction was achieved on tilted-nanohair arrays (TNAs) and tilted-Janusian-nanohair arrays (TJNAs), respectively. Janusian compositional asymmetry on the surface of TJNAs was created by plasma polymer deposition on structurally asymmetric TNAs previously fabricated by Faraday-cage-assisted plasma nanotexturing. The structurally asymmetric TNAs led to DLT against the tilting direction due to the asymmetric wetting under the capillary imbibition between tilted nanohairs and the preferential coalescence of liquid against the tilt direction. The Janusian compositional asymmetry of TJNAs changing the capillarity imbibition condition between tilted nanohairs resulted in the transition of the liquid spreading direction along the tilt direction. The spreading direction along and against the tilt direction is predicted through a comprehensive analysis of the structural and compositional asymmetries of the TNAs and TJNAs.

Mechanically Switchable Wetting Petal Effect in Self-Patterned Nanocolumnar Films on Poly(dimethylsiloxane)

Switchable mechanically induced changes in the wetting behavior of surfaces are of paramount importance for advanced microfluidic, self-cleaning and biomedical applications. In this work we show that the well-known polydimethylsiloxane (PDMS) elastomer develops self-patterning when it is coated with nanostructured TiO₂ films prepared by physical vapor deposition at glancing angles and subsequently subjected to a mechanical deformation. Thus, unlike the disordered wrinkled surfaces typically created by deformation of the bare elastomer, well-ordered and aligned micro-scaled grooves form on TiO₂/PDMS after the first post-deposition bending or stretching event. These regularly patterned surfaces can be reversibly modified by mechanical deformation, thereby inducing a switchable and reversible wetting petal effect and the sliding of liquid droplets. When performed in a dynamic way, this mechanical actuation produces a unique capacity of liquid droplets (water and diiodomethane) transport and tweezing, this latter through their selective capture and release depending on their volume and chemical characteristics. Scanning electron and atomic force microscopy studies of the strained samples showed that a dual-scale roughness, a parallel alignment of patterned grooves and their reversible widening upon deformation, are critical factors controlling this singular sliding behavior and the possibility to tailor their response by the appropriate manufacturing of surface structures.

The effects of bio-inspired micro/nano scale structures on anti-icing properties

Ice formation and accumulation have detrimental effects on commercial surfaces and people's lives. The ice adhesion strength decreases with increasing surface hydrophobicity, and the superhydrophobicity of a surface can be constructed by a combination of low surface free energy and high surface roughness. Conversely, the characteristics of biological surfaces have aroused wide attention as a result of the superhydrophobicity of plants and animals, deriving from the synergistic effects of chemical compositions and multi-scale hierarchical structures. Therefore, inspired by bio-mimetic studies on biological surfaces, a lot of artificial bio-inspired superhydrophobic surfaces have been broadly designed and constructed. Herein, we aim to summarize the fundamental theories of surface wettability and recent progress in the fabrication of bio-inspired surfaces. The bio-inspired surfaces prepared by different facile methods not only have superhydrophobicity, but also have anti-icing/icephobic properties. In the end, some challenges and problems in the future study and advancement of bio-inspired superhydrophobic surfaces are proposed.

The effect of the orientation and the height of periodic sub-micrometric texturing on dropwise condensation

Controlling condensation conditions by surface topography is of prime interest. The aim of this work is to investigate the behavior of water droplets condensing on oriented sub-micrometric structures representing ripples with wavelengths around 800 nm. Droplet behavior was studied on different ripples heights and on untextured surfaces. It was specifically looked at how the presence of ripples creates geometrical confinement, and how that influences the deformation and the orientation of single droplets. Results show that the condensed droplets follow the orientation of textured features, especially with high structures height (150 nm). This is shown by the decreasing of droplet roundness with ripples height. The relative number of circular droplets (roundness near to 1) is around 0.6 for 70 nm high ripples and decrease to around 0.2 for 150 nm high ripples. The corresponding relative number on untextured surface is around 0.5. A mechanism, based on droplets pinning and hysteresis, is proposed to explain the influence of the ripples orientation in a vertical plane, onto the droplet deformation during coalescence step. Finally, the presence of ripples is shown to barely impact breath figure dynamics. Number of droplets and mean droplet radius for the textured and untextured surfaces present a comparable evolution.

Unidirectional Wetting Properties on Multi-Bioinspired Magnetocontrollable Slippery Microcilia

Here, a smart fluid-controlled surface is designed, via the rational integration of the unique properties of three natural examples, i.e., the unidirectional wetting behaviors of butterfly's wing, liquid-infused "slippery" surface of the pitcher plant, and the motile microcilia of micro-organisms. Anisotropic wettability, lubricated surfaces, and magnetoresponsive microstructures are assembled into one unified system. The as-prepared surface covered by tilted microcilia achieves significant unidirectional droplet adhesion and sliding. Regulating by external magnet field, the directionality of ferromagnetic microcilia can be synergistically switched, which facilitates a continuous and omnidirectional-controllable water delivery. This work opens an avenue for applications of anisotropic wetting surfaces, such as complex-flow distribution and liquid delivery, and extend the design approach of multi-bioinspiration integration.

Smart design of wettability-patterned gradients on substrate-independent coated surfaces to control unidirectional spreading of droplets

Highly adherent wettability patterns on the substrate-independent superhydrophobic surfaces of trimethoxyoctadecylsilane modified titanium dioxide (TiO₂)-based coatings were prepared by using commercial photolithography. Three custom unidirectional channels with gradient wettability patterns were obtained by spatially selective wettability conversion from superhydrophobic to superhydrophilic when the coatings were exposed to ultraviolet light (∼365 nm). The movement behavior of droplets on these unidirectional channels was studied and the displacement of droplet movement was effectively controlled. Integrating the idea of gradient wettability patterns into planar microfluidic devices (microreactors), a self-driven fluid transport was achieved to realize droplet metering, merging or reaction, and rapid transport. This self-driven fluid transport with gradient wettability patterns has great potential in fabricating a new category of pump-free microfluidic systems that can be used in various conditions.