Paper-based optical sensors paired with smartphones for biomedical analysis

The traditional analytical methods used for biomedical analysis are expensive and not easy to handle and require sophisticated instruments, thus their application is limited in resource-limited settings. Due to their portability, low cost, and ability to be applied to different analytical techniques, paper-based analytical devices are becoming valuable tools for biomedical analysis. The integration of smartphones into analytical devices has provided the ability to build portable, cost-effective, straightforward analytical devices for biomedical analysis and mobile health. The key aim of this review is to emphasize the recent applications of PADs combined with a smartphone for the optical analysis of biomedical species. We started this review by highlighting the type of papers and their modifications with different materials to prepare the PADs. After that, this review presents various detection methods including colorimetry, fluorescence, and luminescence where the smartphone is used for read-out. In the end, we provided the recent applications of the analysis of different biomedical compounds such as cancer and cardiovascular biomarkers, metal ions, glucose, viruses, etc. We believe that the present review will attract a wide scientific community in the areas of analytical chemistry, sensors, and clinical testing.

High-Throughput Approach for Facile Access to Hetero-Dinuclear Synergistic Metal Complex for H2O2 Activation and Its Implications

Hetero-dinuclear synergic catalysis is a promising approach for improving catalytic performance. However, employing it is challenging because the design principles for the metal complex are still not well understood. Further, these complexes have a broader set of possibilities than mononuclear or homometallic systems, increasing the time and effort required to understand them. In this study, we explored a high-throughput approach to obtain a new hetero-dinuclear synergistic metal complex for H₂O₂ activation. From the 1152 combinations of metal complex candidates obtained by changing three variables (metal ions, unsymmetrical dinucleating ligands, and pH), the lead complex (L3-(Ni, Co)), which has the highest peroxidase activity, was derived using colorimetric parallel analysis. A series of control experiments revealed that L3 plays a crucial role in the formation of active L3-(Ni, Co) complexes, Co²⁺ acts as a catalytic center, and Ni²⁺ serves as an assistant catalytic site within L3-(Ni, Co). In addition, the catalytic efficiency of L3-(Ni, Co), which was 125 times that of the homo-bimetallic complex (L3-(Co, Co)), revealed clear hetero-bimetallic synergism in the buffer. The ultraviolet-visible study and electron paramagnetic resonance-based spin-trap experiment provided mechanistic insight into H₂O₂ activation by the intermediate, which was found to be induced by the reaction of L3-(Ni, Co) and H₂O₂. Moreover, the intermediate could act as a donor of the hydroperoxyl radical (^•OOH) in the buffer. Furthermore, L3-(Ni, Co) demonstrated potential for application as a signal transducer for H₂O₂ in an enzyme-coupled cascade assay that can be used for the colorimetric detection of glucose.

Application of Peroxidase-Mimic Mn2BPMP Boosted by ADP to Enzyme Cascade Assay for Glucose and Cholesterol

The Mn2BPMP complex has an intrinsic peroxidase-like activity in the pH range of 5 to 8, especially a maximum activity at pH 7, while most peroxidase mimics operate at an acidic pH (mainly pH 4). Its peroxidase-like activity is high among small-molecule-based peroxidase mimics with a high reproducibility. In addition, we recently revealed that adenosine mono/diphosphate (AMP and ADP) significantly boosted the peroxidase-like activity of Mn2BPMP. These advantages imply that Mn2BPMP is suitable for biosensing as a substitute for horseradish peroxidase (HRP). Herein, we established a colorimetric one-pot assay system using the enzyme cascade reaction between analyte oxidase and ADP-boosted Mn2BPMP. The simple addition of ADP to the Mn2BPMP-based assay system caused a greater increase in absorbance for the same concentration of H2O2, which resulted in a higher sensitivity. It was applied to one-pot detection of glucose and cholesterol at 25 °C and pH 7.0 for a few minutes.

Effective and prolonged targeting of a nanocarrier to the inflammation site by functionalization with ZnBPMP and chitosan

Efficient and selective targeting of inflamed tissues/organs is critical for diagnosis and therapy. Although nanomaterials themselves have an intrinsic advantage due to their size for targeting inflammation sites, additional functionalization of the nanomaterials with proper targeting moieties is desired to enhance the targeting efficiency. In this study, we aimed to improve the inflammation targeting characteristics of a pluronic-based nanocarrier, which has advantages as a nanosized delivery cargo for diverse molecules, by conjugating with chitosan and ZnBPMP (two Zn(II) ions chelated 2,6-bis[(bis(2-pyridylmethyl)amino)-methyl]-4-methylphenol) moiety. Specific and significant cellular uptake and interaction between the nanocarrier functionalized with ZnBPMP ligand and chitosan to an apoptosis-induced immune cell line were observed in vitro. An inflammation model in the mouse ear caused by skin hypersensitivity was used to evaluate the effect of functionalization with chitosan and ZnBPMP moiety by comparing with various control groups. Functionalization of the nanocarrier with chitosan greatly enhanced the in vivo circulation time of the nanocarrier, so prolonged targeting ability of the nanocarrier to the inflamed ear was achieved. Additional ZnBPMP functionalization to chitosan-functionalized nanocarrier also resulted in significantly improved initial targeting and further enhancement in the targeting until 5 days to the inflamed ear and the decreased non-specific accumulation of the nanocarrier to the remaining body. Thus, developed nanocarrier has a high potential as a drug delivery carrier as well as a diagnostic agent to the inflammation sites.

DNAzyme-Amplified Label-Free Biosensor for the Simple and Sensitive Detection of Pyrophosphatase

The level of pyrophosphatase (PPase) expression has been suggested as a potential biomarker of various cancers, and its prognostic value has been evaluated in patients suffering from lung cancer, colorectal cancer, and hyperthyroidism. However, the detection of PPase usually needs specific materials that require complicated, time-consuming reactions with restricted linear range and sensitivity, limiting their application in early clinical diagnosis. Herein, we developed a DNAzyme-based biosensor for the detection of PPase. In the presence of PPase, pyrophosphate (PPi) and Cu2+ ions released from the PPi-Cu2+-PPi complex induce the cleavage of the DNAzyme and the corresponding substrate. An apurinic/apyrimidinic (AP) site was elaborately designed within substrates that could encase the fluorophore 2-amino-5,6,7-trimethyl-1,8-naphthyridine (ATMND). The fluorescence of ATMND was initially quenched but restored when the DNAzyme/substrate complex was hydrolyzed with the release of ATMND. In this way, the PPase activity can be estimated by detecting the increased fluorescence of the released ATMND. Under optimized conditions, the activity of PPase could be analyzed at concentrations from 0.5 to 1000 mU, with the lowest detectable concentration being 0.5 mU. This work lays a foundation for developing a DNAzyme-amplified fluorescent biosensor with a high sensitivity, a wide linear range, and single-step operation for use as an easy diagnostic for PPase analysis.

An analyte-triggered artificial peroxidase system based on dimanganese complex for a versatile enzyme assay

We described an analyte-activatable artificial peroxidase system (caged Mn₂(bpmp)) by caging a dimanganese complex, exhibiting peroxidase-like activity, with an analyte-reactive trigger. It allowed adjustments of the detection target to be applied depending on the trigger as well as the detection modes, such as fluorescence and colorimetric, as required. This system was successfully applied to a versatile enzyme assay for leucine aminopeptidase and γ-glutamyl transpeptidase based on spectrophotometric change induced from the oxidation of the peroxidase substrate by analyte-triggered peroxidase-like activity.

A long-term stable paper-based glucose sensor using a glucose oxidase-loaded, Mn2BPMP-conjugated nanocarrier with a smartphone readout

A simple paper-based analytical device (PAD) for the one-pot detection of glucose was developed herein using an artificial peroxidase-functionalized and glucose oxidase (GOx)-loaded pluronic-based nanocarrier (PNC). Mn₂BPMP (BPMP; 2,6-bis[(bis(2-pyridylmethyl)amino)-methyl]-4-methylphenolate), an artificial peroxidase, was conjugated to PNC, allowing GOx to be loaded with a very high encapsulation efficiency. In solution, Mn₂BPMP-PNC showed higher peroxidase-like catalytic efficiency than did Mn₂BPMP at physiological pH. In addition, glucose detection via enzyme cascade reaction between GOx and Mn₂BPMP in the GOx loaded-Mn₂BPMP-PNC was more sensitive than the simple combination of Mn₂BPMP and GOx with excellent selectivity. Subsequently, a PAD was fabricated using a laser printer with an assay substance containing GOx loaded-Mn₂BPMP-PNC and peroxidase chromogenic substrate. The prepared Mn₂BPMP-PNC-based PAD quantitatively measured glucose in human serum ranging from normal levels to those typical for diabetics as well as in buffer by obtaining RGB (red, green, and blue) color values through smartphone readout or the naked eye. Importantly, the present PNC-based PAD maintained the detection efficiency during storage at room temperature for 6 weeks in contrast to the rapid decrease in detection efficiency obtained for PAD containing Mn₂BPMP and GOx without PNC.

Colorimetric discrimination of nucleoside phosphates based on catalytic signal amplification strategy and its application to related enzyme assays

Selective detection of adenosine monophosphate (AMP) and adenosine diphosphate (ADP) which are less charged molecules than adenosine triphosphate (ATP) or pyrophosphate (PPi) in aqueous solution has been considered challenging because AMP and ADP have relatively low binding affinity for phosphate receptors. In this study, colorimetric discrimination of nucleoside phosphates was achieved based on catalytic signal amplification through the activation of artificial peroxidase. This method showed high selectivity for AMP and ADP over ATP and PPi, unlike previous phosphate sensors that use Zn²⁺-dipicolylamine-based receptors. High selectivity of the suggested method allowed discrimination of AMP in aqueous solution by the naked eye, and the detection limit was estimated to be 0.5 μM. Mechanism analysis revealed AMP acted as activators in the peroxidation cycle of the Mn₂(bpmp)/ABTS/H₂O₂ system despite having relatively low binding affinity. Additionally, high selectivity and quantitative signal amplification allowed for the development of colorimetric phosphodiesterase and a small molecule kinase assay method. The newly proposed method offers direct, real-time, and quantitative analysis of enzyme activities and inhibition, and is expected to be further applied to high-throughput screening of inhibitors.

A dual-responsive luminescent metal–organic framework as a recyclable luminescent probe for the highly effective detection of pyrophosphate and nitrofurantoin

Luminescent ZTMOF-1 can discriminately detect PPi and NFT with high selectivity, sensitivity and stability.