Structure-property relationships in protic ionic liquids: a study of solvent-solvent and solvent-solute interactions

Characterization and drug solubilization of arginine-based ionic liquids - Impact of counterions and stoichiometry

Ionic liquids (ILs) exhibit very diverse physicochemical properties, such as non-volatility, stability, and miscibility, which render them excellent candidate excipients for multi-purpose use. Six novel arginine (Arg)-based ILs were obtained using a one-step ultrasound method. Salt formation was confirmed by Fourier-transform infrared (FTIR), Raman, and nuclear magnetic resonance (NMR) spectroscopies. Moreover, the effects of anions and molar ratio on the molecular states and thermal properties of Arg-ILs were investigated. In addition, the solubilization of drugs with different pKa and LogP values was attempted using Arg-ILs consisting of asparagine, proline, octanoic acid, and malic acid, respectively, and a comparative study was performed. Furthermore, the interaction mode between the drugs and ILs was determined by FTIR and Raman spectroscopy. Presumably, partial interaction between the component of ILs and drugs such as ofloxacin and valsartan occurred, whereas flurbiprofen and isosorbide mononitrate were dispersed in the viscous IL. The development of strategies for the application of ILs as solubilizers or carriers of active pharmaceutical ingredients is an extremely promising and wide avenue of research.

Proton transfer between sulfonic acids and various propylamines by density functional theory calculations

CONTEXT

Proton transfer in acid-base systems is not well understood. Some acid-base reactions do not proceed to the extent that is expected from the difference in the pK_a values between the base and acid in aqueous solutions, yet some do. In that regard, we have computationally studied the process of proton transfer from the acids of varying strength (benzenesulfonic acid (BSu), methansulfonic acid (MsO), and sulfuric acid (SA)) to the amines with different numbers of propyl substituents on the nitrogen atom (propylamine (PrA), dipropylamine (DPrA), and tripropylamine (TPrA)) upon complexation. Density functional theory calculations were used to thoroughly examine the energetic and structural aspects of the molecular complexes and/or ionic pairs resulting from the acid-base interaction. The potential energy curves along the proton transfer coordinate in these acid-amine systems were analyzed. The change in free energies accompanying the molecular complexes and ionic pair formations was calculated, and the relationship between the energy values and the ΔРА parameter (difference in proton affinity of the acid anion and amine) was established. The larger ΔРА values were found to be unfavorable for the formation of ionic pairs. Using structural, energy, QTAIM, and NBO analyses, we determined that the hydrogen bonds in the molecular complexes PrA-MsO and PrA-BSu are stronger than those in their corresponding ionic pairs. The ionic pairs with the TPrA cation possess the strongest hydrogen bonds of all the ionic pairs being studied, regardless of the anion. The results showed that hydrogen bonding interactions in the molecular complexes contribute significantly to the energies of the acid-base interaction, while in the ionic pairs, the most important energy contribution comes from Coulomb interactions, followed by hydrogen bonding and dispersion forces. The ionic pairs with propylammonium, dipropylammonium, and tripropylammonium cations have stronger ion-ion interactions than tetrapropylammonium (TetPrA)-containing ionic pairs with the same anions. This effect rises with the order of the cation: TetPrA → TPrA → DPrA → PrA, and the sequence of anions is SA → BSu → MsO. The results obtained here expand the concept of acid-base interaction and provide an alternative to experimental searches for suitable acids and bases to obtain new types of protic ionic liquids.

METHODS

All quantum-chemical calculations were carried out by using the DFT/B3LYP-GD3/6-31++G(d,p) level as implemented in the Gaussian 09 software package. For the resulting structures, the electron density distribution was analyzed by the "atoms in molecules" (QTAIM) and the natural bond orbital (NBO) methods on the wave functions obtained at the same level of theory by AIMAll Version 10.05.04 and Gaussian NBO Version 3.1 programs, respectively.

Effect of isopropyl side chain branching and different anions on electronic structure, vibrational spectra, and hydrogen bonding of isopropyl-imidazolium-based ionic liquids: Experimental and theoretical investigations

In the present work, four branched methylated, 1,2-dimethyl-3-isopropyl-imidazolium (i-[C₃Dmim⁺]) and protonated,1-methyl-3-isopropyl-imidazolium (i-[C₃mim⁺])-based ionic liquids (ILs) with varying anion (Br^-, BF₄^-, PF₆^-, and NTf₂^-) were synthesized and investigated by NMR, infrared (IR) and Raman spectroscopy. Based on infrared and Raman spectroscopy, complete vibrational assignments have been performed. The IR and Raman analysis revealed that the vibrational spectra are virtually unaffected upon methylation, while significant frequency changes were observed by changing anion. Furthermore, to determine the electronic structure, energetic stability, and vibrational properties of these i-[C₃Dmim]Y, i-[C₃mim]Y (Y = Br, BF₄, PF₆, and NTf₂) ion pairs, quantum chemical calculations including the dispersion correction method are performed both on single ions and on ionic couples. The calculated electron density was analyzed to expose non-covalent intra- and interionic interactions by the quantum theory of atoms in molecules (AIM) and interpreted in terms of both anion dependence and type of interaction. Computational results suggest that for all ionic couples the most energetically stable configuration is obtained with the anions located close to the C2 position of the imidazolium cation. However, in the case of i-[C₃mim]NTf₂ and i-[C₃Dmim]BF₄, similar energies were obtained in configurations 2 and 3 where the anion is located above the imidazolium ring. For i-[C₃mim]Br a stronger hydrogen bond is predicted than for other studied ILs. Calculations indicate that a red shift of the CH stretching bands should occur due to hydrogen bonding; indeed, such displacement of bands is experimentally observed.

Protein aggregation and crystallization with ionic liquids: Insights into the influence of solvent properties

Ionic liquids (ILs) have been used in solvents for proteins in many applications, including biotechnology, pharmaceutics, and medicine due to their tunable physicochemical and biological properties. Protein aggregation is often undesirable, and predominantly occurs during bioprocesses, while the aggregation process can be reversible or irreversible and the aggregates formed can be native/non-native and soluble/insoluble. Recent studies have clearly identified key properties of ILs and IL-water mixtures related to protein performance, suggesting the use of the tailorable properties of ILs to inhibit protein aggregation, to promote protein crystallization, and to control protein aggregation pathways. This review discusses the critical properties of IL and IL-water mixtures and presents the latest understanding of the protein aggregation pathways and the development of IL systems that affect or control the protein aggregation process. Through this feature article, we hope to inspire further advances in understanding and new approaches to controlling protein behavior to optimize bioprocesses.

Modelling biocompatible ionic liquids based on organic acids and amino acids: challenges for computational models and future perspectives

In this short review I shall highlight the basic principle and the difficulties that arise in attempting the computational modeling of seemingly simple systems which hide an unexpected complexity. Biocompatible ionic liquids which are based on the coupling of organic or amino acid anions with metabolic cations such as cholinium are the target of this review. These substances have been the subject of intense research activities in the last few years and have attracted the attention of computational chemists. I shall show that the computational description of these substances is far from trivial and requires the use of sophisticated techniques in order to account for a surprisingly rich chemistry that is due to several phenomena such as polarization, charge transfer, proton transfer equilibria and tautomerization reactions.

Assessing the Structure of Protic Ionic Liquids Based on Triethylammonium and Organic Acid Anions

We present a computational analysis of the short-range structure of three protic ionic liquids based on strong organic acids: trifluoracetate, methanesulfonate, and triflate of triethylammonium. Accurate ab initio computations carried out on the gas-phase dimers show that the protonation of triethylamine is spontaneous. We have identified the anion-cation binding motif that is due to the presence of a strong hydrogen bond and to electrostatic interactions. The strength of the hydrogen bond and the magnitude of the binding energy decrease in the order trifluoroacetate ≳ methanesulfonate > triflate. The corresponding simulations of the bulk phases, obtained using a semiempirical evaluation of the interatomic forces, reveal that on short timescales, the state of the three liquids remains highly ionized and that the gas-phase cation-/anion-binding motif is preserved while no other peculiar structural features seem to emerge.

DFT Study on the Chemical Absorption Mechanism of CO2 in Diamino Protic Ionic Liquids

Diamino protic ionic liquids (DPILs) possess a wide application prospect in the field of acid gas absorption. In this work, two representative DPILs, that is, dimethylethylenediamine 4-fluorophenolate ([DMEDAH][4-F-PhO]) and dimethylethylenediamine acetate ([DMEDAH][OAc]), which had been proved to display favorable CO₂ absorption performance in experiments, were selected. Based on the solvation model, the different mechanisms of CO₂ absorption by [DMEDAH]⁺ cations combined with different anions were investigated using the dispersion-corrected density functional theory method. Above all, the possible active sites of the reaction between DPILs and CO₂ were analyzed by electrostatic potential (ESP) and electronegativity, and the transition states in each path were searched and verified by frequency calculation and intrinsic reaction coordinate calculation. Furthermore, the Gibbs free energy and reaction heat of each path were calculated, and the free energy barrier and enthalpy barrier diagrams were shown. It was found that the absorption path by the anion of [DMEDAH][4-F-PhO] was favorable in kinetics, while the absorption path by the cation was thermodynamically beneficial. In addition, [DMEDAH][OAc] only showed the possibility of cation absorption, and the mechanism of the transfer of active protons to weak acid anions and the formation of acetic acid molecules was more favorable. Moreover, through the structural analysis, bond order and bond energy calculation, ESP analysis of the ion pair absorption configuration, and comparison with the products of CO₂ absorbed by isolated ions, it was found that the interaction between anions/cations and CO₂ could weaken or enhance the interaction between anions and cations in different reaction steps. Hopefully, this study is helpful to understand the absorption mechanism of CO₂ by DPILs and provides a theoretical basis for the R&D of multi-active site functionalized ILs.

Synthesis, crystal structures and electrochemical properties of ferrocenyl imidazole derivatives

Six ferrocenyl imidazole derivatives substituted with -Cl, -NO₂ and -CH₃ on the 2-position of the 1H-imidazole ring have been synthesized. Of the six compounds, the di-substituted ferrocenes, i.e. compounds 4 (1,1′-ferrocenylmethyl(2-chloroimidazole)), 5 (1,1′-ferrocenyl(2-nitroimidazole)), and 6 (1,1′-ferrocenylmethyl(2-methylimidazole)) are reported for the first time. The structure-property relationships of compounds 4, 5 and 6 were investigated by means of UV-visible, FTIR, ¹H-NMR, ¹³C-NMR spectroscopy and electrochemical studies. UV-visible analysis in acetonitrile showed that the π -π* band of compounds 2 (1-ferrocenylmethyl(2-nitroimidazole)) and 5 appeared at longer wavelength compared to 1 (1-ferrocenylmethyl(2-chloroimidazole)), 3 (1-ferrocenylmethyl(2-methylimidazole)), 4 and 6. This phenomenon is due to the different electronics around the imidazole moieties. In cyclic voltammetry analysis, all compounds exhibited a quasi-reversible redox wave for the ferrocenyl and imidazole moieties. Density functional theoretical (DFT) calculations with the B3LYP/6-311+G(d) basis set were performed on compounds 1–6, and the calculated HUMO-LUMO band gap energies correlated with those obtained from electrochemical and spectroscopic data. The X-ray crystallographic analysis highlighted the effect of electron-withdrawing and electron-donating substituents on the conformation of the cyclopentadienyl rings attached to the ferrocenyl moiety.

Enhanced CO2 capture by reducing cation-anion interactions in hydroxyl-pyridine anion-based ionic liquids

In this work, an efficient strategy for improving CO2 capture based on anion-functionalized ionic liquids (ILs) by reducing cation-anion interactions in ILs was reported. The influence of the cationic species on CO2 absorption was investigated using 2-hydroxyl pyridium anions ([2-Op]) as a probe. CO2 capture experiments indicated that the CO2 absorption capacity in [2-Op] anion-based ILs varied from 0.94 to 1.69 mol CO2 per mol IL at 30 °C and 1 atm. Spectroscopic analysis and quantum chemical calculations suggested that the increase of the CO2 absorption capacity may be ascribed to the reduction of the strength of cation-anion interactions in ILs, and stronger cation-anion interactions would make one CO2 site in the [2-Op] anion inactive. Furthermore, the effect of the cation unit on the anion was evidenced by FT-IR spectra, implying that strong interactions between ions may lead to the decrease of the IR absorption wavenumber of hydroxy pyridium and work against CO2 capture. Following this strategy, it was finally found that [Ph-C8eim][2-Op] (Ph-C8eim = 1-N-ethyl-3-N-octyl-2-phenylimidazolium) with weaker cation-anion interactions exhibited a significant increase in the CO2 uptake capacity, and extremely high capacities of 1.69 and 1.83 mol CO2 per mol IL could be achieved at 30 and 20 °C, respectively. The study presented here would be helpful for further designing novel and effective ILs for advancing CO2 capturing performance.

Key factor governing the physicochemical properties and extent of proton transfer in protic ionic liquids: ΔpKa or chemical structure?

A series of protic ionic liquids (PILs) are prepared by neutralisation of bis(trifluoromethanesulfonyl)amide acid (H[NTf₂]) with various amines, and the properties (especially thermal stability and ionicity) are compared with those of PILs from 1,8-diazabicyclo[5.4.0]-7-undecene (DBU) and various acids.

Validation of pH Standards and Estimation of the Activity Coefficients of Hydrogen and Chloride Ions in an Ionic Liquid, Ethylammonium Nitrate

We selected and validated the pH values of three standard materials that function in the protic ionic liquid, ethylammonium nitrate (EAN). The pH values of 0.05 mol kg^-1 phthalate, oxalate, and phosphate buffers were 4.93 (0.04), 2.12 (0.04), and 7.13 (0.06), respectively (the values in the parentheses denote the standard deviation). Because the pH of EAN ranges from 0 to 10, with a neutral pH of 5, these materials are usable as acidic, basic, or neutral standards. The standard electrode potential of silver-silver chloride in EAN was 127.2 (1.7) mV. The activity coefficients of hydrogen and chloride ions remain equal to unity in EAN of a wide concentration range, which indicates that the effective ionic strength is independent of the solute ion concentration. In addition, the estimated value of the transfer activity coefficient of chloride ion suggests a weaker solvation in EAN compared with water in spite of a ubiquitous cation (C₂H₅NH₃⁺). These behaviors of ions in EAN can be explained by the unique solvation in the ionic liquid through direct ion-ion electrostatic interactions.

Thermodynamic properties of selenoether-functionalized ionic liquids and their use for the synthesis of zinc selenide nanoparticles

Three selenoether-functionalized ionic liquids (ILs) of N-[(phenylseleno)methylene]pyridinium (1), N-(methyl)- (2) and N-(butyl)-N'-[(phenylseleno)methylene]imidazolium (3) with bis(trifluoromethanesulfonyl)imide anions ([NTf2]) were prepared from pyridine, N-methylimidazole and N-butylimidazole with in situ obtained phenylselenomethyl chloride, followed by ion exchange to give the desired compounds. The crystal structures of the bromide and tetraphenylborate salts of the above cations (1-Br, 2-BPh4 and 3-BPh4) confirm the formation of the desired cations and indicate a multitude of different supramolecular interactions besides the dominating Coulomb interactions between the cations and anions. The vaporization enthalpies of the synthesized [NTf2]-containing ILs were determined by means of a quartz-crystal microbalance method (QCM) and their densities were measured with an oscillating U-tube. These thermodynamic data have been used to develop a method for assessment of miscibility of conventional solvents in the selenium-containing ILs by using Hildebrandt solubility parameters, as well as for modeling with the electrolyte perturbed-chain statistical associating fluid theory (ePC-SAFT) method. Furthermore, structure-property relations between selenoether-functionalized and similarly shaped corresponding aryl-substituted imidazolium- and pyridinium-based ILs were analyzed and showed that the contribution of the selenium moiety to the enthalpy of vaporization of an IL is equal to the contribution of a methylene (CH2) group. An incremental approach to predict vaporization enthalpies of ILs by a group contribution method has been developed. The reaction of these ILs with zinc acetate dihydrate under microwave irradiation led to ZnSe nanoparticles of an average diameter between 4 and 10 nm, depending on the reaction conditions.

High CO2 absorption by diamino protic ionic liquids using azolide anions

Highly efficient low-viscosity protic ionic liquids with enhanced CO₂ absorption capacities exhibiting more than 20% w/w uptake.