Solvent Effect on Bond Heterolytic Energy of Nickel Phenolate Complexes in Acetonitrile and Dimethyl Sulfoxide

Solvents can profoundly influence reaction outcomes and mechanisms through the solvation of the reaction components. Here, we determined the Ni-O bond heterolytic energy [ΔGhet(Ni-O)] of nickel phenolates using dimethyl sulfoxide (DMSO) and acetonitrile (MeCN) as solvents. The results showed that ΔGhet(Ni-O) in DMSO is larger than that in MeCN. This counterintuitive thermodynamics suggests that low-polarity MeCN can stabilize ionic species, generated from Ni-O bond heterolysis, more effectively than high-polarity DMSO, challenging the conventional notion of solvent polarity effects. Further experimental and theoretical studies elucidated the origin of this unique solvent effect, which cannot be observed in Pd-O systems. This work underscores the crucial role of solvents in modulating the stability of transition metal species, which can even reverse reaction thermodynamics.

Oxygen Atom Transfer Reactions of Colloidal Metal Oxide Nanoparticles

Redox transformations at metal oxide (MOx)/solution interfaces are broadly important, and oxygen atom transfer (OAT) is one of the simplest and most fundamental examples of such reactivity. OAT is a two-electron transfer process, well-known in gas/solid reactions and catalysis. However, OAT is rarely directly observed at oxide/water interfaces, whose redox reactions are typically proposed to occur in one-electron steps. Reported here are stoichiometric OAT reactions of organic molecules with aqueous colloidal titanium dioxide and iridium oxide nanoparticles (TiO2 and IrOx NPs). Me2SO (DMSO) oxidizes reduced TiO2 NPs with the formation of Me2S, and IrOx NPs transfer O atoms to a water-soluble phosphine and a thioether. The reaction stoichiometries were established and the chemical mechanisms were probed using typical solution spectroscopic techniques, exploiting the high surface areas and transparency of the colloids. These OAT reactions, including a catalytic example, utilize the ability of the individual NPs to accumulate many electrons and/or holes. Observing OAT reactions of two different materials, in opposite directions, is a step toward harnessing oxide nanoparticles for valuable multi-electron and multi-hole transformations.

Thermodynamics-inspired identification of privileged organocatalysts for hydrogen evolution reactions

The 7π-aromaticity observed in N-heterocyclic phosphinyl radicals (NHP˙) can offset the energy penalty associated with the disruption of 6π-aromaticity in NHP cations. This property endows NHP hydrides with facile regeneration, rendering NHP privileged organocatalysts for electrochemical hydrogen evolution reactions.

CO2 Reduction at a Borane-Modified Iron Complex: A Secondary Coordination Sphere Strategy

This work addresses fundamental questions that deepen our understanding of secondary coordination sphere effects on carbon dioxide (CO2) reduction using derivatized hydride analogues of the type, [Cp*Fe(diphosphine)H] (Cp* = C5Me5 -) - a well-studied family of organometallic complex - as models. More precisely, we describe the general reactivity of [(Cp*-BR2)Fe(diphosphine)H], which contains an intramolecularly positioned Lewis acid, and its cooperative reactivity with CO2. Control experiments underscore the critical nature of borane incorporation for transforming CO2 to reduced products, a reaction that does not occur for unfunctionalized [Cp*Fe(diphosphine)H]. Additional experiments highlight relevance of borane hybridization and substituent effects. Mechanistic studies performed in the presence and absence of CO2 emphasize the significance of carbonyl substrate to catalyst longevity. Lessons from these reactions were also transferable - with such borane-containing complexes enabling the chemoselective reduction of aldehydes in the presence of alkenes. These findings provide valuable insights into metal-ligand cooperative design strategies for carbonyl reduction and illustrate the versatility of intramolecularly positioned Lewis acids for otherwise challenging chemical transformations.

NAD(P)H-Inspired CO2 Reduction Based on Organohydrides

The conversion of CO2 into value-added chemicals and fuels using stable, cost-effective, and eco-friendly metal-free catalysts is a promising technology to mitigate the global environmental crisis. In the Calvin cycle of natural photosynthesis, CO2 reduction (CO2R) is achieved using the cofactor NADPH as the reducing agent through 2e-/1H+ or H- transfer. Consequently, inspired by NAD(P)H, a series of organohydrides with adjustable reducibility show remarkable potential for efficient metal-free CO2R. In this review, we first summarize the photosensitizers for NAD(P)H regeneration and list the representative photoenzyme CO2R system. Then, we introduce the NAD(P)H-inspired organohydrides and their applications in redox reactions. Furthermore, we discuss recent progress and breakthroughs by utilizing organohydrides as metal-free CO2R catalysts. Moreover, we delve into the reaction mechanisms and applications of these organohydrides, shedding light on their potential as sustainable alternatives to metal-based CO2R catalysts. Finally, we offer insights into the prospects and potential directions for advancing this intriguing avenue of organohydride-based catalysts for CO2R.

Organocatalytic Hydrogen Evolution Reaction by Diazaphospholenes

The electrochemical hydrogen evolution reaction (HER) is currently recognized as a prospective way to obtain clean energy. The electrocatalysts used currently are dominantly based on transition metals. In this work, we have demonstrated a diazaphospholene (N-heterocyclic phosphine (NHP))-type small molecular organocatalyst that can catalyze the HER with a maximum current density of 130 mA·cm-2, an overpotential of 354 mV, and a faradaic efficiency of 90%. Mechanistic studies verify a Heyrovsky-type process with NHP, whereas its hydricity and aromaticity favor hydrogen release and catalyst regeneration.

Hydroborative Depolymerization of Polyesters and Polycarbonates to Diols Catalyzed by Heterogeneous Lanthanum Materials La(CH2C6H4NMe2-o)3@SBA-15

Chemical recycling is a promising strategy to establish a circular plastic economy, and it is still in an early stage of development. In this work, the reductive depolymerization of polyesters and polycarbonates into their corresponding borylated alcohols promoted by heterogeneous lanthanum materials was described. Grafting the easily accessible lanthanum tris(aminobenzyl) complex La(CH2C6H4NMe2-o)3 (1) onto the partially dehydroxylated silica support SBA-15 (SBA-15500 or SBA-15700) gave the inorganic-organic hybrid materials 1@SBA-15500 and 1@SBA-15700. These hybrid lanthanum materials, in combination with pinacolborane (HBpin), could serve as highly active heterogeneous catalysts for the selective depolymerization of aliphatic and aromatic polyesters, as well as polycarbonates into their corresponding borylated diols through a hydroboration reaction under mild conditions. The lanthanum materials exhibited a practical application in plastic waste recycling for their easy preparation, high catalytic efficiency, and recyclable property.

Site-selective α-C(sp3)-H arylation of dialkylamines via hydrogen atom transfer catalysis-enabled radical aryl migration

Site-selective C(sp3)-H arylation is an appealing strategy to synthesize complex arene structures but remains a challenge facing synthetic chemists. Here we report the use of photoredox-mediated hydrogen atom transfer (HAT) catalysis to accomplish the site-selective α-C(sp3)-H arylation of dialkylamine-derived ureas through 1,4-radical aryl migration, by which a wide array of benzylamine motifs can be incorporated to the medicinally relevant systems in the late-stage installation steps. In contrast to previous efforts, this C-H arylation protocol exhibits specific site-selectivity, proforming predominantly on sterically more-hindered secondary and tertiary α-amino carbon centers, while the C-H functionalization of sterically less-hindered N-methyl group can be effectively circumvented in most cases. Moreover, a diverse range of multi-substituted piperidine derivatives can be obtained with excellent diastereoselectivity. Mechanistic and computational studies demonstrate that the rate-determining step for methylene C-H arylation is the initial H atom abstraction, whereas the radical ipso cyclization step bears the highest energy barrier for N-methyl functionalization. The relatively lower activation free energies for secondary and tertiary α-amino C-H arylation compared with the functionalization of methylic C-H bond lead to the exceptional site-selectivity.

Establishing the Thermodynamic Cards of Dipine Models' Oxidative Metabolism on 21 Potential Elementary Steps

Dipines are a type of important antihypertensive drug as L-calcium channel blockers, whose core skeleton is the 1,4-dihydropyridine structure. Since the dihydropyridine ring is a key structural factor for biological activity, the thermodynamics of the aromatization dihydropyridine ring is a significant feature parameter for understanding the mechanism and pathways of dipine metabolism in vivo. Herein, 4-substituted-phenyl-2,6-dimethyl-3,5-diethyl-formate-1,4-dihydropyridines are refined as the structurally closest dipine models to investigate the thermodynamic potential of dipine oxidative metabolism. In this work, the thermodynamic cards of dipine models' aromatization on 21 potential elementary steps in acetonitrile have been established. Based on the thermodynamic cards, the thermodynamic properties of dipine models and related intermediates acting as electrons, hydrides, hydrogen atoms, protons, and two hydrogen ions (atoms) donors are discussed. Moreover, the thermodynamic cards are applied to evaluate the redox properties, and judge or reveal the possible oxidative mechanism of dipine models.

Electrocatalytic formate and alcohol oxidation by hydride transfer at first-row transition metal complexes

The electrocatalytic oxidation of carbon-based liquid fuels, such as formic acid and alcohols, has important applications for our renewable energy transition. Molecular electrocatalysts based on transition metal complexes provide the opportunity to explore the interplay between precise catalyst design and electrocatalytic activity. Recent advances have seen the development of first-row transition metal electrocatalysts for these transformations that operate via hydride transfer between the substrate and catalyst. In this Frontier article, we present the key contributions to this field and discuss the proposed mechanisms for each case. These studies also reveal the remaining challenges for formate and alcohol oxidation with first-row transition metal systems, for which we provide perspectives on future directions for next-generation electrocatalyst design.

Catalytic Olefin Transpositions Facilitated by Ruthenium N,N,N-Pincer Complexes

In this report, we demonstrate olefin transposition/isomerization reactions catalyzed by a series of N,N,N-pincer (1,3-bis(2-pyridylimino)isoindoline) Ru-hydride complexes. The protocol proceeds at room temperature for most substrates, achieving excellent yields, regioselectivity, and diastereoselectivity in short reaction times. The air-stable Ru-chloride derivatives of these complexes exhibit comparable reactivity enabling benchtop setup and synthetic versatility. Furthermore, we demonstrate the potential for one-pot cascade sequences of the products derived from the transposition reactions.

Cobaltocene-Mediated Catalytic Hydride Transfer: Strategies for Electrocatalytic Hydrogenation

The selective electrocatalytic hydrogenation of organics with transition metal hydrides is a promising strategy for electrosynthesis and energy storage. We report the electrocatalytic hydrogenation of acetone with a cyclopentadienone-iridium complex in a tandem electrocatalytic cycle with a cobaltocene mediator. The reductive protonation of cobaltocenium with mild acids generates (C5H5)CoI(C5H6) (CpCoI(CpH)), which functions as an electrocatalytic hydride mediator to deliver a hydride to cationic Ir(III) without generating hydrogen. Electrocatalytic hydride transfer by CpCoI(CpH) to a cationic Ir species leads to the efficient (Faradaic efficiency > 90%) electrohydrogenation of acetone, a valuable hydrogenation target as a liquid organic hydrogen carrier (LOHC). Hydride-transfer mediation presents a powerful strategy to generate metal hydrides that are inaccessible by stepwise electron/proton transfer.

Niobic acid as a support for microheterogeneous nanocatalysis of sodium borohydride hydrolysis under mild conditions

This study explores the stabilization by niobic acid, of Pt, Ni, Pd, and Au nanoparticles (NPs) for the efficient microheterogeneous catalysis of NaBH4 hydrolysis for hydrogen production. Niobic acid is the most widely studied Nb2O5 polymorph, and it is employed here for the first time for this key reaction relevant to green energy. Structural insights from XRD, Raman, and FTIR spectroscopies, combined with hydrogen production data, reveal the role of niobic acid's Brønsted acidity in its catalytic activity. The supported NPs showed significantly higher efficiency than the non-supported counterparts regarding turnover frequency, average hydrogen production rate, and cost. Among the tested NPs, PtNPs and NiNPs demonstrate the most favorable results. The data imply mechanism changes during the reaction, and the kinetic isotope assay indicates a primary isotope effect. Reusability assays demonstrate consistent yields over five cycles for PtNPs, although catalytic efficiency decreases, likely due to the formation of reaction byproducts.

Expanding the Scope of Aluminum Chemistry with Noninnocent Ligands

ConspectusAluminum is the most abundant metal in the earth's crust at 8%, and it is also widely available domestically in many countries worldwide, which ensures a stable supply chain. To further the applications of aluminum (Al), such as in catalysis and electronic and energy storage materials, there has been significant interest in the synthesis and characterization of new Al coordination compounds that can support electron transfer (ET) and proton transfer (PT) chemistry. This has been achieved using redox and chemically noninnocent ligands (NILs) combined with the highly stable M(III) oxidation state of Al and in some cases the heavier group 13 ions, Ga and In.When ligands participate in redox chemistry or facilitate the breaking or making of new bonds, they are often termed redox or chemically noninnocent, respectively. Al(III) in particular supports rich ligand-based redox chemistry because it is so redox inert and will support the ligand across many charge and protonation states without entering into the reaction chemistry. To a lesser extent, we have reported on the heavier group 13 elements Ga and In, and this chemistry will also be included in this Account, where available.This Account is arranged into two technical sections, which are (1) Structures of Al-NIL complexes and (2) Reactivity of Al-NIL complexes. Highlights of the research work include reversible redox chemistry that has been enabled by ligand design to shut down radical coupling pathways and to prevent loss of H2 from unsaturated ligand sites. These reversible redox properties have in turn enabled the characterization of Class III electron delocalization through Al when two NIL are bound to the Al(III) in different charge states. Characterization of the metalloaromatic character of square planar Al and Ga complexes has been achieved, and characterization of the delocalized electronic structures has provided a model within which to understand and predict the ET and PT chemistry of the NIL group 13 compounds. The capacity of Al-NIL complexes to perform ET and PT has been employed in reactions that use ET or PT reactivity only or in reactions where coupled ET/PT affords hydride transfer chemistry. As an example, ligand-based PT reactions initiate metal-ligand cooperative bond activation pathways for catalysis: this includes acceptorless dehydrogenation of formic acid and anilines and transfer hydrogenation chemistry. In a complementary approach, ligand based ET/PT chemistry has been used in the study of dihydropyridinate (DHP-) chemistry where it was shown that N-coordination of group 13 ions lowers kinetic barriers to DHP- formation. Taken together, the discussion presented herein illustrates that the NIL chemistry of Al(III), and also of Ga(III) and In(III) holds promise for further developments in catalysis and energy storage.

Thermodynamic and Kinetic Activity Descriptors for the Catalytic Hydrogenation of Ketones

Activity descriptors are a powerful tool for the design of catalysts that can efficiently utilize H2 with minimal energy losses. In this study, we develop the use of hydricity and H- self-exchange rates as thermodynamic and kinetic descriptors for the hydrogenation of ketones by molecular catalysts. Two complexes with known hydricity, HRh(dmpe)2 and HCo(dmpe)2, were investigated for the catalytic hydrogenation of ketones under mild conditions (1.5 atm and 25 °C). The rhodium catalyst proved to be an efficient catalyst for a wide range of ketones, whereas the cobalt catalyst could only hydrogenate electron-deficient ketones. Using a combination of experiment and electronic structure theory, thermodynamic hydricity values were established for 46 alkoxide/ketone pairs in both acetonitrile and tetrahydrofuran solvents. Through comparison of the hydricities of the catalysts and substrates, it was determined that catalysis was observed only for catalyst/ketone pairs with an exergonic H- transfer step. Mechanistic studies revealed that H- transfer was the rate-limiting step for catalysis, allowing for the experimental and computation construction of linear free-energy relationships (LFERs) for H- transfer. Further analysis revealed that the LFERs could be reproduced using Marcus theory, in which the H- self-exchange rates for the HRh/Rh+ and ketone/alkoxide pairs were used to predict the experimentally measured catalytic barriers within 2 kcal mol-1. These studies significantly expand the scope of catalytic reactions that can be analyzed with a thermodynamic hydricity descriptor and firmly establish Marcus theory as a valid approach to develop kinetic descriptors for designing catalysts for H- transfer reactions.

C-H Bond Activation by Iridium(III) and Iridium(IV) Oxo Complexes

Oxidation of an iridium(III) oxo precursor enabled the structural, spectroscopic, and quantum-chemical characterization of the first well-defined iridium(IV) oxo complex. Side-by-side examination of the proton-coupled electron transfer thermochemistry revealed similar driving forces for the isostructural oxo complexes in two redox states due to compensating contributions from H+ and e- transfer. However, C-H activation of dihydroanthracene revealed significant hydrogen tunneling for the distinctly more basic iridium(III) oxo complex. Our findings complement the growing body of data that relate tunneling to ground state properties as predictors for the selectivity of C-H bond activation.

Thermodynamic Evaluations of Amines as Hydrides or Two Hydrogen Ions Reductants and Imines as Protons or Two Hydrogen Ions Acceptors, as Well as Their Application in Hydrogenation Reactions

Since the hydrogenation of imines (X) and the dehydrogenation of amines (XH2) generally involve the two hydrogen ions (H- + H+) transfer, the thermodynamic abilities of various amines releasing hydrides or two hydrogen ions as well as various imines accepting protons or two hydrogen ions are important and characteristic physical parameters. In this work, the pKa values of 84 protonated imines (XH+) in acetonitrile were predicted. Combining Gibbs free energy changes of amines releasing hydrides in acetonitrile from our previous work with the pKa(XH+) values, the Gibbs free energy changes of amines releasing two hydrogen ions and imines accepting two hydrogen ions were derived using Hess's law by constructing thermochemical cycles, and the thermodynamic evaluations of amines as hydrides or two hydrogen ions reductants and imines as protons or two hydrogen ions acceptors are well compared and discussed. Eventually, the practical application of thermodynamic data for amines and imines on hydrogenation feasibility, mechanism, and possible elementary steps was shown and discussed in this paper from the point of thermodynamics.

Triarylmethyl cation redox mediators enhance Li-O2 battery discharge capacities

A major impediment to Li-O2 battery commercialization is the low discharge capacities resulting from electronically insulating Li2O2 film growth on carbon electrodes. Redox mediation offers an effective strategy to drive oxygen chemistry into solution, avoiding surface-mediated Li2O2 film growth and extending discharge lifetimes. As such, the exploration of diverse redox mediator classes can aid the development of molecular design criteria. Here we report a class of triarylmethyl cations that are effective at enhancing discharge capacities up to 35-fold. Surprisingly, we observe that redox mediators with more positive reduction potentials lead to larger discharge capacities because of their improved ability to suppress the surface-mediated reduction pathway. This result provides important structure-property relationships for future improvements in redox-mediated O2/Li2O2 discharge capacities. Furthermore, we applied a chronopotentiometry model to investigate the zones of redox mediator standard reduction potentials and the concentrations needed to achieve efficient redox mediation at a given current density. We expect this analysis to guide future redox mediator exploration.

Sensitizer-Free Photochemical Regeneration of Benzimidazoline Organohydride

Organohydrides are an important class of organic compounds that can provide hydride anions for chemical and biochemical reactions, as demonstrated by reduced nicotinamide adenine dinucleotides serving as important natural redox cofactors. The coupling of hydride transfer from the organohydride to the substrate and subsequent regeneration of the organohydride from its oxidized form can realize organohydride-catalyzed reduction reactions. Depending on the structure of the organohydride, its hydridicity and ease of regeneration vary. Benzimidazoline (BIH) is one of the strongest synthetic C-H hydride donors; however, its reductive regeneration requires highly reducing conditions. In this study, we synthesized various oxidized and reduced forms of BIH derivatives with aryl groups at the 2-position and investigated their photophysical and electrochemical properties. 4-(Dimethylamino)phenyl-substituted BIH exhibited salient red-shifted absorption compared with other synthesized BIH derivatives, and visible-light-driven regeneration without using an external photosensitizer was achieved. This knowledge has significant implications for the future development of solar-energy-based catalytic photoreduction technologies that utilize organohydride regeneration strategies.

Metallated dihydropyridinates: prospects in hydride transfer and (electro)catalysis

Hydride transfer (HT) is a fundamental step in a wide range of reaction pathways, including those mediated by dihydropyridinates (DHP-s). Coordination of ions directly to the pyridine ring or functional groups stemming therefrom, provides a powerful approach for influencing the electronic structure and in turn HT chemistry. Much of the work in this area is inspired by the chemistry of bioinorganic systems including NADH. Coordination of metal ions to pyridines lowers the electron density in the pyridine ring and lowers the reduction potential: lower-energy reactions and enhanced selectivity are two outcomes from these modifications. Herein, we discuss approaches for the preparation of DHP-metal complexes and selected examples of their reactivity. We suggest further areas in which these metallated DHP-s could be developed and applied in synthesis and catalysis.

Enhanced Excited-State Hydricity of Pd-H Allows for Unusual Head-to-Tail Hydroalkenylation of Alkenes

Photoinduced enhancement of hydricity of palladium hydride species enables unprecedented hydride addition-like ("hydridic") hydropalladation of electron-deficient alkenes, which allows for chemoselective head-to-tail cross-hydroalkenylation of electron-deficient and electron-rich alkenes. This mild and general protocol works with a wide range of densely functionalized and complex alkenes. Notably, this approach also allows for highly challenging cross-dimerization of electronically diverse vinyl arenes and heteroarenes.

Synthesis, Structural Characterization, and CO2 Reactivity of a Constitutionally Analogous Series of Tricopper Mono-, Di-, and Trihydrides

The formation of hydrides at heterogeneous copper surfaces results in dramatic structural and reactivity changes, yet the morphologies of these materials and their respective roles in catalysis are not well understood. Of particular interest is the reactivity of heterogeneous copper hydrides with carbon dioxide (CO₂), an early mechanistic branching point in the CO₂ reduction reaction. Herein, we report the synthesis, characterization, and reactivity of tricopper compounds supported by a facially biased, chelating tris(carbene) ligand scaffold. This sterically bulky environment affords access to an isolable series of tricopper hydrides: [LCu₃H]²⁺ (4), [LCu₃H₂]⁺ (3), and LCu₃H₃ (6). Single-crystal X-ray diffraction and solution NMR spectroscopy studies reveal both geometric flexibility within the Cu₃ core and fluxionality of hydride ligands across the Cu₃ cluster, providing both atomically precise experimental analogues of static surface species and emulating dynamic ligand behavior proposed for surfaces. Electronic structure calculations serve as a predictor of hydricity, which was likewise benchmarked experimentally via both protonolysis and hydride abstraction reactions. Increased hydride number (and commensurately lower cluster charge) results in more hydridic complexes, with a thermodynamic hydricity range spanning >30 kcal/mol. These thermochemical studies serve as an accurate predictor of CO₂ reactivity. Together, this Cu₃H_x series exhibits the structure/reactivity relationships proposed for catalytically active copper surfaces, validating the application of carefully designed molecular clusters toward elucidating mechanisms in surface science.

Bis-Imidazolium-Embedded Heterohelicene: A Regenerable NADP+ Cofactor Analogue for Electrocatalytic CO2 Reduction

Biomimetic NAD(P)H-type organic hydride donors have recently been advocated as potential candidates to act as metal-free catalysts for fuel-forming reactions such as the reduction of CO₂ to formic acid and methanol, similar to the natural photosynthesis process of fixing CO₂ into carbohydrates. Although these artificial synthetic organic hydrides are extensively used in organic reduction chemistry in a stoichiometric manner, translating them into catalysts has been challenging due to problems associated with the regeneration of these hydride species under applied reaction conditions. A recent discovery of the possibility of their regeneration under electrochemical conditions via a proton-coupled electron-transfer pathway triggered intense research to accomplish their catalytic use in electrochemical CO₂ reduction reactions (eCO₂RR). However, success is yet to be realized to term them as "true" catalysts, as the typical turnover numbers (TONs) of the eCO₂RR processes on inert electrodes for the production of formic acid and/or methanol reported so far are still in the order of 10^-3-10^-2; thus, sub-stoichiometric only! Herein, we report a novel class of structurally engineered heterohelicene-based organic hydride donor with a proof-of-principle demonstration of catalytic electrochemical CO₂ reduction reaction showing a significantly improved activity with more than stoichiometric turnover featuring a 100-1000-fold enhancement of the existing TON values. Mechanistic investigations suggested the critical role of the two cationic imidazolium motifs along with the extensive π-conjugation present in the backbone of the heterohelicene molecules in accessing and stabilizing various radical species involved in the generation and transfer of hydride, via multielectron-transfer steps in the electrochemical process.

Redox Mediators in Homogeneous Co-electrocatalysis

Homogeneous electrocatalysis has been well studied over the past several decades for the conversion of small molecules to useful products for green energy applications or as chemical feedstocks. However, in order for these catalyst systems to be used in industrial applications, their activity and stability must be improved. In naturally occurring enzymes, redox equivalents (electrons, often in a concerted manner with protons) are delivered to enzyme active sites by small molecules known as redox mediators (RMs). Inspired by this, co-electrocatalytic systems with homogeneous catalysts and RMs have been developed for the conversion of alcohols, nitrogen, unsaturated organic substrates, oxygen, and carbon dioxide. In these systems, the RMs have been shown to both increase the activity of the catalyst and shift selectivity to more desired products by altering catalytic cycles and/or avoiding high-energy intermediates. However, the area is currently underdeveloped and requires additional fundamental advancements in order to become a more general strategy. Here, we summarize the recent examples of homogeneous co-electrocatalysis and discuss possible future directions for the field.

Light-switched selective catalysis with NADH mimic functionalized metal-organic capsules

By incorporating an active site model of nicotinamide adenine dinucleotide (NADH) as an electron regulator, a redox-active metal-organic capsule as an efficient photocatalyst was obtained for the light switchable synthesis of a series of aromatic azoxy and amino compounds from their corresponding nitroaromatics under either purple (420 nm) or blue (455 nm) LED light irradiation.

Quantification of the hydride donor abilities of NADH, NADPH, and BH3CN- in water

The nucleophilic reactivities of the hydride donors NADH, NADPH, and BH₃CN^- in water were quantified using kinetic measurements with benzhydrylium ions as reference electrophiles. All three hydride donors were found to possess almost identical nucleophilic reactivities, providing a potential explanation for why they are involved in similar transformations in biochemistry and organic synthesis, respectively.

Metal-Ligand Role Reversal: Hydride-Transfer Catalysis by a Functional Phosphorus Ligand with a Spectator Metal

Hydride transfer catalysis is shown to be enabled by the nonspectator reactivity of a transition metal-bound low-symmetry tricoordinate phosphorus ligand. Complex 1·[Ru]+, comprising a nontrigonal phosphorus chelate (1, P(N(o-N(2-pyridyl)C6H4)2) and an inert metal fragment ([Ru] = (Me5C5)Ru), reacts with NaBH4 to give a metallohydridophosphorane (1H·[Ru]) by P-H bond formation. Complex 1H·[Ru] is revealed to be a potent hydride donor (ΔG°H-,exp < 41 kcal/mol, ΔG°H-,calc = 38 ± 2 kcal/mol in MeCN). Taken together, the reactivity of the 1·[Ru]+/1H·[Ru] pair comprises a catalytic couple, enabling catalytic hydrodechlorination in which phosphorus is the sole reactive site of hydride transfer.

Quantifying Reductive Amination in Nonenzymatic Amino Acid Synthesis

Amino acid biosynthesis initiates with the reductive amination of α-ketoglutarate with ammonia to produce glutamate. However, the other α-keto acids derived from the glyoxylate and Krebs cycles are converted into amino acids by transamination, rather than by reductive amination. Why is only one amino acid synthesized by reductive amination and not the others? To explore this question, we quantified the inherent reactivities of keto acids in nonenzymatic reduction and reductive amination by using BH3 CN- as a model nucleophile. Biological α-keto acids were found to show pronounced nonenzymatic reactivity differences for the formation of amino acids (α-ketoglutarate Collapse

Key Words

• Amino Acids
• Hydride Transfer
• Kinetics
• Metabolism
• Reductive Amination

Collapse

MESH Headings

• Amination
• Ammonia/chemistry
• Ketoglutaric Acids/metabolism
• Amino Acids/chemistry
• Keto Acids
• Glutamic Acid/metabolism
• Amines

Collapse

Grants

• HORIZON EUROPE European Research Council
• Volkswagen Foundation
• Deutsche Forschungsgemeinschaft

Collapse

Affiliation(s)

Robert J. Mayer Institut de Science et d'Ingénierie Supramoléculaires (ISIS)CNRS UMR 7006Université de Strasbourg8 Allée Gaspard Monge67000StrasbourgFrance
Joseph Moran Institut de Science et d'Ingénierie Supramoléculaires (ISIS)CNRS UMR 7006Université de Strasbourg8 Allée Gaspard Monge67000StrasbourgFrance Institut Universitaire de France (IUF)75005ParisFrance

Collapse

Benchmarking Density Functionals, Basis Sets, and Solvent Models in Predicting Thermodynamic Hydricities of Organic Hydrides

Many renewable energy technologies, such as hydrogen gas synthesis and carbon dioxide reduction, rely on chemical reactions involving hydride anions (H^-). When selecting molecules to be used in such applications, an important quantity to consider is the thermodynamic hydricity, which is the free energy required for a species to donate a hydride anion. Theoretical calculations of thermodynamic hydricity depend on several parameters, mainly the density functional, basis set, and solvent model. In order to assess the effects of the above three parameters, we carry out hydricity calculations with different combinations of density functionals, basis sets, and solvent models for a set of organic molecules with known experimental hydricity values. The data are analyzed by comparing the R² and root-mean-squared error (RMSE) of linear fits with a fixed slope of 1 and using the Akaike Information Criterion to determine statistical significance of the RMSE rank ordering. Based on these results, we quantified the accuracy of theoretical predictions of hydricity and found that the best compromise between accuracy and computational cost was obtained by using the B3LYP-D3 density functional for the geometry optimization and free-energy corrections, either ωB97X-D3 or M06-2X-D3 for single-point energy corrections, combined with a basis set no larger than def-TZVP and the C-PCM ISWIG solvation model. At this level of theory, the RMSEs of hydricity calculations for organic molecules in acetonitrile and dimethyl sulfoxide were found to be <4 and <10 kcal/mol, respectively, for an experimental data set with a dynamic range of 20-150 kcal/mol.

Correlating Thermodynamic and Kinetic Hydricities of Rhenium Hydrides

The kinetics of hydride transfer from Re(^Rbpy)(CO)₃H (bpy = 4,4'-R-2,2'-bipyridine; R = OMe, ^tBu, Me, H, Br, COOMe, CF₃) to CO₂ and seven different cationic N-heterocycles were determined. Additionally, the thermodynamic hydricities of complexes of the type Re(^Rbpy)(CO)₃H were established primarily using computational methods. Linear free-energy relationships (LFERs) derived by correlating thermodynamic and kinetic hydricities indicate that, in general, the rate of hydride transfer increases as the thermodynamic driving force for the reaction increases. Kinetic isotope effects range from inverse for hydride transfer reactions with a small driving force to normal for reactions with a large driving force. Hammett analysis indicates that hydride transfer reactions with greater thermodynamic driving force are less sensitive to changes in the electronic properties of the metal hydride, presumably because there is less buildup of charge in the increasingly early transition state. Bronsted α values were obtained for a range of hydride transfer reactions and along with DFT calculations suggest the reactions are concerted, which enables the use of Marcus theory to analyze hydride transfer reactions involving transition metal hydrides. It is notable, however, that even slight perturbations in the steric properties of the Re hydride or the hydride acceptor result in large deviations in the predicted rate of hydride transfer based on thermodynamic driving forces. This indicates that thermodynamic considerations alone cannot be used to predict the rate of hydride transfer, which has implications for catalyst design.

Luminescent Iridium Complexes with a Sulfurated Bipyridine Ligand: PCET Thermochemistry of the Disulfide Unit and Photophysical Properties

Molecular systems combining light harvesting and charge storage are receiving great attention in the context of, for example, artificial photosynthesis and solar fuel generation. As part of ongoing efforts to develop new concepts for photoinduced proton-coupled electron transfer (PCET) reactivities, we report a cyclometallated iridium(III) complex [Ir(ppy)₂(^S-Sbpy)](PF₆) ([1]PF₆) equipped with our previously developed sulfurated bipyridine ligand ^S-Sbpy. A new one-step synthetic protocol for ^S-Sbpy is developed, starting from commercially available 2,2'-bipyridine, which significantly facilitates the use of this ligand. [1]⁺ features a two-electron reduction with potential inversion (|E₁| > |E₂|) at moderate potentials (E₁ = -1.12, E₂ = -1.11 V versus. Fc^+/0 at 253 K), leading to a dithiolate species [1]^-. Protonation with weak acids allows for determination of pK_a = 23.5 in MeCN for the S-H···S^- unit of [1H]. The driving forces for both the H atom and the hydride transfer are calculated to be ∼60 kcal mol^-1 and verified experimentally by reaction with a suitable H atom and a hydride acceptor, demonstrating the ability of [1]⁺ to serve as a versatile PCET reagent, albeit with limited thermal stability. In MeCN solution, an orange emission for [1]PF₆ from a triplet-excited state was found. Density functional calculations and ultrafast absorption spectroscopy are used to give insight into the excited-state dynamics of the complex and suggest a significantly stretched S-S bond for the lowest triplet-state T₁. The structural responsiveness of the disulfide unit is proposed to open an effective relaxation channel toward the ground state, explaining the unexpectedly short lifetime of [1]⁺. These insights as well as the quantitative ground-state thermochemistry data provide valuable information for the use of ^S-Sbpy-functionalized complexes and their disulfide-/dithiol-directed PCET reactivity.

Insights into the Capture of CO2 by Nickel Hydride Complexes

As a desired feedstock for sustainable energy source and for chemical synthesis, the capture and utilization of CO2 have attracted chemists’ continuous efforts. The homogeneous CO2 insertion into a nickel hydride complex to generate formate provides insight into the role of hydrogen as an active hydride form in the hydrogenation of CO2, which serves as a practicable approach for CO2 utilization. To parameterize the activities and to model the structure–activity relationship in the CO2 insertion into nickel hydride, the comprehensive mechanism of CO2 insertion into a series of square planar transition metal hydride (TM–H, TM = Ni, Pd, and Co) complexes was investigated using density functional theory (DFT) computations. The stepwise pathway with the TM-(H)-formate intermediate for the CO2 insertion into all seven square planar transition metal hydride (TM–H) complexes was observed. The overall rate-determining step (RDS) was the nucleophilic attraction of the terminal O atom on the Ni center in Ni-(H)-formate to form Ni-(O)-(exo)formate. The charge of the Ni atom in the axially vacant [Ni]+ complex was demonstrated as the dominant factor in CO2 insertion, which had an excellent linear correction (R2 = 0.967) with the Gibbs barrier (ΔG‡) of the RDS. The parameterized activities and modeled structure–activity relationship provided here light the way to the design of a more efficient Ni–H complex in the capture and utilization of CO2.

Toggling the Z-type interaction off-on in nickel-boron dihydrogen and anionic hydride complexes

Completing a series of nickel-group 13 complexes, a coordinatively unsaturated nickel-boron complex and its derivatives with a H₂, N₂, or hydride ligand were synthesized and characterized. The toggling "on" of a Ni(0)-B(III) inverse-dative bond enabled the stabilization of a nickel-bound anionic hydride with a remarkably low thermodynamic hydricity of kcal mol^-1 in THF. The flexible topology of the boron metalloligand confers both favorable hydrogen binding affinity and strong hydride donicity, albeit at the cost of high H₂ basicity during deprotonation to form the hydride.

Mechanistic Studies of Oxygen-Atom Transfer (OAT) in the Homogeneous Conversion of N2O by Ru Pincer Complexes

As the overall turnover-limiting step (TOLS) in the homogeneous conversion of N2O, the oxygen-atom transfer (OAT) from an N2O to an Ru-H complex to generate an N2 and Ru-OH complex has been comprehensively investigated by density functional theory (DFT) computations. Theoretical results show that the proton transfer from Ru-H to the terminal N of endo N2O is most favorable pathway, and the generation of N2 via OAT is accomplished by a three-step mechanism [N2O-insertion into the Ru-H bond (TS-1-2, 24.1 kcal mol−1), change of geometry of the formed (Z)-O-bound oxyldiazene intermediate (TS-2-3, 5.5 kcal mol−1), and generation of N2 from the proton transfer (TS-3-4, 26.6 kcal mol−1)]. The Gibbs free energy of activation (ΔG‡) of 29.0 kcal mol−1 for the overall turnover-limiting step (TOLS) is determined. With the participation of potentially existing traces of water in the THF solvent serving as a proton shuttle, the Gibbs free energy of activation in the generation of N2 (TS-3-4-OH2) decreases to 15.1 kcal mol−1 from 26.6 kcal mol−1 (TS-3-4). To explore the structure–activity relationship in the conversion of N2O to N2, the catalytic activities of a series of Ru-H complexes (C1–C10) are investigated. The excellent linear relationships (R2 > 0.91) between the computed hydricities (ΔGH−) and ΔG‡ of TS-3-4, between the computed hydricities (ΔGH−) and the ΔG‡ of TOLS, were obtained. The utilization of hydricity as a potential parameter to predict the activity is consistent with other reports, and the current results suggest a more electron-donating ligand could lead to a more active Ru-H catalyst.

Using Light and Electrons to Bend Carbon Dioxide: Developing and Understanding Catalysts for CO2 Conversion to Fuels and Feedstocks

Our global society generates an unwieldy amount of CO₂ per unit time. Therefore, the capture of this greenhouse gas must involve a diverse set of strategies. One solution to this problem is the conversion of CO₂ into a more useful chemical species. Again, a multiplicity of syntheses and products will be necessary. No matter how elegant the chemistry is, commercial markets often have little use for a small set of compounds made in tremendous yield. Following this reasoning, the Bocarsly Research Group seeks to develop new electrochemical and photochemical processes that may be of utility in the conversion of CO₂ to organic compounds. We focus on investigating proton-coupled charge transfer mechanisms that produce both C1 and carbon-carbon bonded products (C2+).In early work, we considered the reduction of CO₂ to formate at electrocatalytic indium and tin electrodes. These studies demonstrated the key role of surface oxides in catalyzing the reduction of CO₂. This work generated efficient systems for the formation of formate and paved the way to studies using non-copper, intermetallic electrocatalysts for the generation of C2+ species. Most notable is the efficient formation of oxalate at an oxidized Cr₃Ga electrode. Oxalate has recently been suggested as a potential nonfossil, alternate organic feedstock.Separately, we have focused on the electrocatalytic effects of pyridine on the reduction of CO₂ in aqueous electrolyte. These studies demonstrated that electrodes that normally yield a low hydrogen overpotential (Pd and Pt) show suppressed H₂ evolution and strongly enhanced activity for CO₂ reduction in the presence of pyridinium. Methanol was observed to form in high Faradaic yield at low overpotential using this system. The 6-electron, 6-proton reduction of CO₂ in the presence of pyridinium was intriguing, and significant effort was placed on understanding the mechanism of this reaction both on metal electrodes and on semiconducting photocathodes. P-GaP electrodes were found to provide exceptional behavior for the formation of methanol using only light as the energy source.The pyridinium studies highlighted the role of protons in the overall reduction of CO₂, stimulating our interest in the chemistry of MnBr(bpy)(CO)₃ and related compounds. This complex was reported to electrochemically reduce CO₂ to CO. We saw these reports as an opportunity to study the detailed nature of the proton-coupled electron transfer (PCET) mechanism associated with CO₂ reduction. Our investigation of this system revealed the role of hydrogen-bonding in CO₂ reduction and pointed the way for the construction of a photochemical process for CO generation using a [(bpy)(CO)₃Mn(CN)Mn(bpy)(CO)₃]⁺ photocatalyst.Based on our studies to date, it appears likely that heterogeneous systems can be assembled to convert CO₂ into products that are "beyond C2 products." This may open up new practical chemistry in the area of fossil-based replacements for both synthesis and fuels. Systems with pragmatic efficiencies are close to reality. Electrochemical reactors using heterogeneous electrocatalysts show the stability and product selectivity needed to generate industrial opportunities. Continued growth of mechanistic understanding is expected to facilitate the chemical design of cogent systems for the taming of CO₂.

Biomimetic Metal-Free Hydride Donor Catalysts for CO2 Reduction

The catalytic reduction of carbon dioxide to fuels and value-added chemicals is of significance for the development of carbon recycling technologies. One of the main challenges associated with catalytic CO₂ reduction is product selectivity: the formation of carbon monoxide, molecular hydrogen, formate, methanol, and other products occurs with similar thermodynamic driving forces, making it difficult to selectively reduce CO₂ to the target product. Significant scientific effort has been aimed at the development of catalysts that can suppress the undesired hydrogen evolution reaction and direct the reaction toward the selective formation of the desired products, which are easy to handle and store. Inspired by natural photosynthesis, where the CO₂ reduction is achieved using NADPH cofactors in the Calvin cycle, we explore biomimetic metal-free hydride donors as catalysts for the selective reduction of CO₂ to formate. Here, we outline our recent findings on the thermodynamic and kinetic parameters that control the hydride transfer from metal-free hydrides to CO₂. By experimentally measuring and theoretically calculating the thermodynamic hydricities of a range of metal-free hydride donors, we derive structural and electronic factors that affect their hydride-donating abilities. Two dominant factors that contribute to the stronger hydride donors are identified to be (i) the stabilization of the positive charge formed upon HT via aromatization or by the presence of electron-donating groups and (ii) the destabilization of hydride donors through the anomeric effect or in the presence of significant structural constrains in the hydride molecule. Hydride donors with appropriate thermodynamic hydricities were reacted with CO₂, and the formation of the formate ion (the first reduction step in CO₂ reduction to methanol) was confirmed experimentally, providing an important proof of principle that organocatalytic CO₂ reduction is feasible. The kinetics of hydride transfer to CO₂ were found to be slow, and the sluggish kinetics were assigned in part to the large self-exchange reorganization energy associated with the organic hydrides in the DMSO solvent. Finally, we outline our approaches to the closure of the catalytic cycle via the electrochemical and photochemical regeneration of the hydride (R-H) from the conjugate hydride acceptors (R⁺). We illustrate how proton-coupled electron transfer can be efficiently utilized not only to lower the electrochemical potential at which the hydride regeneration takes place but also to suppress the unwanted dimerization that neutral radical intermediates tend to undergo. Overall, this account provides a summary of important milestones achieved in organocatalytic CO₂ reduction and provides insights into the future research directions needed for the discovery of inexpensive catalysts for carbon recycling.

Predictive Energetic Tuning of C-Nucleophiles for the Electrochemical Capture of Carbon Dioxide

This work maps the thermodynamics of electrochemically generated C-nucleophiles for reactive capture of CO₂. We identify a linear relationship between the pK_a, the reduction potential of a protonated nucleophile (E_red), and the nucleophile’s free energy of CO₂ binding (ΔGbind). Through synergistic experiments and computations, this study establishes a three-parameter correlation described by the equation ΔGbind=−0.78pKa+4.28Ered+20.95 for a series of twelve imidazol(in)ium/N-heterocyclic carbene pairs with an R² of 0.92. The correlation allows us to predict the ΔGbind of C-nucleophiles to CO₂ using reduction potentials or pK_as of imidazol(in)ium cations. The carbenes in this study were found to exhibit a wide range CO₂ binding strengths, from strongly CO₂ binding to nonspontaneous. This observation suggests that the ΔGbind of imidazol(in)ium-based carbenes is tunable to a desired strength by appropriate structural changes. This work sets the stage for systematic energetic tuning of electrochemically enabled reactive separations.

•

CO₂ binding energy was calculated for a set of N-heterocyclic carbenes (NHCs)

•

CO₂ binding energy of NHCs is widely synthetically tunable

•

pK_a, reduction potential, and CO₂ binding energy correlate linearly for NHCs

•

3D correlation enables easy prediction of CO₂ binding strength for novel NHCs

Reductive depolymerization of polyesters and polycarbonates with hydroboranes by using a lanthanum(III) tris(amide) catalyst

The homogeneous reductive depolymerization of polyesters and polycarbonates with hydroboranes is achieved with the use of an f-metal complex catalyst. These polymeric materials are transformed into their value-added alcohol equivalents. Catalysis proceeds readily, under mild conditions, with La[N(SiMe₃)₂]₃ (1 mol%) and pinacolborane (HBpin) and shows high selectivity towards alcohols and diols, after hydrolysis.

Density functional theory investigation of Ru(II) and Os(II) asymmetric transfer hydrogenation catalysts

Transition metal ions have a unique ability to organise and control the steric and electronic effects around a substrate in the active site of a catalyst. We consider half-sandwich Ru(II) (Noyori-type) and Os(II) sulfonyldiamine 16-electron active catalysts [Ru/Os(η⁶-p-cymene)(TsDPEN-H₂)], where TsDPEN is N-tosyl-1,2-diphenylethylenediamine containing S,S or R,R chiral centres, which catalyse the highly efficient asymmetric transfer hydrogenation of aromatic ketones to chiral alcohols using formic acid as a hydride source. We discuss the recognition of the prochiral ketone acetophenone by the catalyst, the protonation of a ligand NH and transfer of hydride from formate to the metal, subsequent transfer of hydride to one enantiotopic face of the ketone, followed by proton transfer from metal-bound NH₂, and regeneration of the catalyst. Our DFT calculations illustrate the role of the two chiral carbons on the N,N-chelated sulfonyldiamine ligand, the axial chirality of the π-bonded p-cymene arene, and the chirality of the metal centre. We discuss new features of the mechanism, including how a change in metal chirality of the hydride intermediate dramatically switches p-cymene coordination from η⁶ to η². Moreover, the calculations suggest a step-wise mechanism involving substrate docking to the bound amine NH₂ followed by hydride transfer prior to protonation of the O-atom of acetophenone and release of the enantio-pure alcohol. This implies that formation and stability of the M-H hydride intermediate is highly dependent on the presence of the protonated amine ligand. The Os(II) catalyst is more stable than the Ru(II) analogue, and these studies illustrate the subtle differences in mechanistic behaviour between these 4d⁶ and 5d⁶ second-row and third-row transition metal congeners in group 8 of the periodic table.

What Distinguishes the Strength and the Effect of a Lewis Acid: Analysis of the Gutmann-Beckett Method

IUPAC defines Lewis acidity as the thermodynamic tendency for Lewis pair formation. This strength property was recently specified as global Lewis acidity (gLA), and is gauged for example by the fluoride ion affinity. Experimentally, Lewis acidity is usually evaluated by the effect on a bound molecule, such as the induced 31 P NMR shift of triethylphosphine oxide in the Gutmann-Beckett (GB) method. This type of scaling was called effective Lewis acidity (eLA). Unfortunately, gLA and eLA often correlate poorly, but a reason for this is unknown. Hence, the strength and the effect of a Lewis acid are two distinct properties, but they are often granted interchangeably. The present work analyzes thermodynamic, NMR specific, and London dispersion effects on GB numbers for 130 Lewis acids by theory and experiment. The deformation energy of a Lewis acid is identified as the prime cause for the critical deviation between gLA and eLA but its correction allows a unification for the first time.

Nucleophilicity and Electrophilicity in the Gas Phase: Silane Hydricity

Hydricity is of great import as hydride transfer reactions are prominent in many processes, including organic synthesis, photoelectrocatalysis, and hydrogen activation. Herein, the kinetic hydricity of a series of silanes is examined in the gas phase. Most of these reactions have not heretofore been studied in vacuo and provide valuable data that can be compared to condensed-phase hydricity, to reveal the effects of solvent. Both experiments and computations are used to gain insight into mechanism and reactivity. In a broader sense, these studies also represent a first step toward systematically understanding nucleophilicity and electrophilicity in the absence of a solvent.

Thermodynamics regulated organic hydride/acid pairs as novel organic hydrogen reductants

Organic hydride/acid pairs could realize transformation of N-substituted organic hydrides from hydride reductants to thermodynamics regulated hydrogen reductants on conveniently choosing suitable organic hydrides and acids with various acidities.

A Strong Hydride Donating, Acid Stable and Reusable 1,4-Dihydropyridine for Selective Aldimine and Aldehyde Reductions

A 1,4-dihydropyridine derivative, lacking carbonyl groups and containing bulky aryl substituents, was synthesized and found to have a high hydride donating ability, acid resistance and reusability. Thermodynamic parameters for electron...

An NAD+-type earth-abundant metal complex enabling photo-driven alcohol oxidation

For the first time, an NAD⁺-type earth-abundant metal complex [Zn(pbn)₂(H₂O)](ClO₄)₂ (1) was found to exhibit photo-induced oxidizing ability to convert various primary and secondary alcohols to the corresponding aldehyde and ketone compounds. In addition, a two-electron-reduced Zn(II) complex [Zn(pbnH-pbnH)(ClO₄)₂] (1red) comprising the novel C-C coupling ligand, obtained by the photo-induced oxidation of alcohols by 1, was successfully isolated and completely characterized. We clarified that the photochemical oxidation of alcohols by 1 to produce 1red proceeds via an electron transfer followed by proton transfer mechanism as elucidated by kinetic analysis on the basis of absorption spectroscopic measurements.

Recent progress in reactivity study and synthetic application of N-heterocyclic phosphorus hydrides

N-heterocyclic phosphines (NHPs) have recently emerged as a new group of promising catalysts for metal-free reductions, owing to their unique hydridic reactivity. The excellent hydricity of NHPs, which rivals or even exceeds those of many metal-based hydrides, is the result of hyperconjugative interactions between the lone-pair electrons on N atoms and the adjacent σ^*(P–H) orbital. Compared with the conventional protic reactivity of phosphines, this umpolung P–H reactivity leads to hydridic selectivity in NHP-mediated reductions. This reactivity has therefore found many applications in the catalytic reduction of polar unsaturated bonds and in the hydroboration of pyridines. This review summarizes recent progress in studies of the reactivity and synthetic applications of these phosphorus-based hydrides, with the aim of providing practical information to enable exploitation of their synthetically useful chemistry.