Mesoporous magnetic supported Cu complex for one-pot synthesis of 5-substituted 1H-tetrazoles in green media and the oxidation of sulfides

We used the copper Phthalocyanine (Pc) on magnetic mesoporous silica nanoparticles. Therefore, several coordination sites became available which enhance chelating potency to load appropriate amounts of Gadolinium (Gd). This improves the catalytic activity in converting nitrile to tetrazole and selective oxidation of sulfides. Gadolinium (Gd) with incompletely occupied 4f and empty 5d orbitals can be used as the active component or as the promoter of the catalyst. Here, we outline the synthesis, characterization, and catalytic activity of a novel Gd(III) copper Phthalocyanine (Pc) coordination on the CoFe2O4/SBA-15 (CoFe2O4/SBA-15/CuPc@Gd). The prepared material was characterized using powder X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, elemental mapping, vibrating-sample magnetometer (VSM), Inductively coupled plasma atomic emission spectroscopy (ICP-AES), Fourier transform infrared spectroscopy, and nitrogen adsorption-desorption isotherm. The CoFe2O4/SBA-15/CuPc@Gd composite consists of a mesoporous structure with a surface area by BET and t-plot of 122.2 m2/g and 86.28 m2/g respectively, with a mean pore size of 5.37 nm, and pore volume of 0.164 cm3/g. The CoFe2O4/SBA-15/CuPc@Gd was successfully applied as a powerful catalyst for green synthesis of 5-substituted 1H-tetrazoles in water and selective oxidation of sulfides at room temperature. This catalyst was recovered and reused several times without a significant decrease in efficiency and stability. The catalyst could be fully recovered by an external magnetic field and showed good reusability.

Chiral Porous Organic Polymers (CPOPs): Design, Synthesis, and Applications in Asymmetric Catalysis

Since the recognition of the area of asymmetric synthesis in 2000, there has been a tremendous focus on the development of heterogeneous catalysts for asymmetric synthesis. Porous organic polymers (POPs) have emerged in recent years as inextricable materials of high physicochemical and hydrolytic stabilities, permitting infinite possibilities to modulate and tune reactivity, engineer porosity, regulate spatial environments and pore attributes, and maneuver material transport. With a diligent design of building blocks and the exploitation of organic reactions judiciously, the synthesis of POPs with BET surface areas of the order of a few thousand cm3/g has been demonstrated. The incorporation of reactive functional groups and chiral centers into the porous matrices of polymers offers opportunities to conduct asymmetric synthesis. Very high enantioselectivities of the order of 99% ee have been exemplified in the reactions mediated by chiral POPs (CPOPs). The design-driven tunability of POPs allows the development of catalytic materials for targeted applications in a tailor-made fashion. This review, while placing the development of chiral materials for asymmetric synthesis in the right perspective, delves into different design principles to pave the way for continued research on futuristic CPOP materials by a creative design, limited by one's imagination, for heretofore unprecedented results.

Single-Crystal X-ray Structures of Homochiral Brønsted Acidic Covalent Organic Frameworks

Determining the crystal structures of covalent organic frameworks (COFs) with atomic precision is pivotal for uncovering their properties and optimizing functionalities. However, the synthesis of high-quality single crystals of COFs suitable for X-ray diffraction analysis, especially chiral COFs (CCOFs), remains a formidable challenge. In this work, we report two three-dimensional (3D) CCOFs synthesized via imine condensation of tetrahedral tetraamine and tetraaldehydes derived from optically active 1,1'-biphenol phosphoryl chloride or thiophosphoryl chloride. Single crystals of varying sizes are obtained through either a low-temperature modulation strategy, yielding large crystals up to 100 μm, or a solvothermal method. The large single crystals are structurally characterized by single-crystal X-ray diffraction, achieving a resolution of 0.90 Å. These two CCOFs are isostructural and each features a 4-fold interpenetrated diamondoid open framework with all phosphoric acid groups periodically aligned within tubular helical channels, displaying enhanced Brønsted acidity compared to non-immobilized acids. The frameworks exhibit permanent porosity, chemical resistance in boiling water, 14 M NaOH, and 0.1 M HCl, and thermal stability up to 400 °C. Notably, these CCOFs serve as efficient and recyclable heterogeneous Brønsted acid catalysts in the asymmetric addition to aromatic aldehydes, enantioselective transfer hydrogenation of ketimines, and three-component direct asymmetric Mannich reactions involving aldimines and cyclic ketones, achieving good to high enantioselectivities (up to 99.5% ee) that surpass those obtained in analogous systems with homogeneous catalysts. This work represents the first successful demonstration of single-crystal structures of homochiral COFs, paving the way for in-depth investigations into structure-property relationships in enantioselective processes and facilitating the design of novel functional chiral organic materials.

Exploring Supramolecular Frustrated Lewis Pairs

Frustrated Lewis pairs (FLPs) have rapidly become one of the key metal-free catalysts for a variety of chemical transformations. Embedding these catalysts within a supramolecular assembly can offer improvements to factors such as recyclability and selectivity. In this review we discuss advances in this area, covering key supramolecular assemblies such as metal organic frameworks (MOFs), covalent organic frameworks (COFs), polymers and macrocycles.

Catalytic applications of organic-inorganic hybrid porous materials

Organic-inorganic hybrid porous materials (OIHMs) inherit the unique properties from both organic and inorganic components, and the flexibility in the incorporation of functional groups renders the OIHMs an ideal platform for the construction of catalytic materials with multiple active sites. The preparation of OIHMs with precise locations of organic-inorganic components and tunable structures is one of the important topics for the catalytic application of OIHMs, but it is still very challenging. In this feature article, we describe our work related to the preparation of OIHMs via confining active sites in the nanostructure and a layer-by-layer assembly method and their applications in acid-base catalysis, catalytic hydrogenation and photocatalysis with a focus on the elucidation of the synergistic effects of different active sites and the unique properties of OIHMs in catalysis.

Metal-Organic Framework-Induced Rh Monocoodination on Diphosphine Ligand Enables Catalytic Hydroformylation of Aliphatic Olefins at Room Temperature and Pressure

Persistent challenges in hydroformylation of olefins include controlling regioselectivity, particularly for short aliphatic olefins and conducting reactions under ambient conditions. We report here the synthesis of monophosphine-Rh complexes on a typical chelated diphosphine ligand mediated by a Zr-MOF through isolating a pair of phosphorus atoms. We demonstrate that single-crystal X-ray diffraction can elucidate the structural transformation of the Rh catalyst during olefin hydroformylation, providing valuable information on active site reconstruction during catalysis. The Rh-MOF catalyst demonstrates excellent catalytic and recyclable performance in the hydroformylation of short aliphatic olefins with linear to branched ratios of up to 99 : 1. Due to the framework's capacity to adsorb and concentrate gases, the catalytic reactions occur under room temperature and pressure, eliminating the need for the high temperature and pressures typically required in homogeneous systems. This study show that Zr-MOF can be a unique platform for synthesizing unusual catalytic species that cannot exist in solutions for meaningful chemical transformations and elucidate valuable structural information pertaining to metal-based catalysis.

Factors influencing the performance of organocatalysts immobilised on solid supports: A review

Organocatalysis has become a powerful tool in synthetic chemistry, providing a cost-effective alternative to traditional catalytic methods. The immobilisation of organocatalysts offers the potential to increase catalyst reusability and efficiency in organic reactions. This article reviews the key parameters that influence the effectiveness of immobilised organocatalysts, including the type of support, immobilisation techniques and the resulting interactions. In addition, the influence of these factors on catalytic activity, selectivity and recyclability is discussed, providing an insight into optimising the performance of immobilised organocatalysts for practical applications in organic chemistry.

Biomimetic Chiral Nanomaterials with Selective Catalysis Activity

Chiral nanomaterials with unique chiral configurations and biocompatible ligands have been booming over the past decade for their interesting chiroptical effect, unique catalytical activity, and related bioapplications. The catalytic activity and selectivity of chiral nanomaterials have emerged as important topics, that can be potentially controlled and optimized by the rational biochemical design of nanomaterials. In this review, chiral nanomaterials synthesis, composition, and catalytic performances of different biohybrid chiral nanomaterials are discussed. The construction of chiral nanomaterials with multiscale chiral geometries along with the underlying principles for enhancing chiroptical responses are highlighted. Various biochemical approaches to regulate the selectivity and catalytic activity of chiral nanomaterials for biocatalysis are also summarized. Furthermore, attention is paid to specific chiral ligands, materials compositions, structure characteristics, and so on for introducing selective catalytic activities of representative chiral nanomaterials, with emphasis on substrates including small molecules, biological macromolecule, and in-site catalysis in living systems. Promising progress has also been emphasized in chiral nanomaterials featuring structural versatility and improved chiral responses that gave rise to unprecedented chances to utilize light for biocatalytic applications. In summary, the challenges, future trends, and prospects associated with chiral nanomaterials for catalysis are comprehensively proposed.

Application of chiral recyclable catalysts in asymmetric catalysis

Chiral drugs hold a significant position within the contemporary pharmaceutical market, and the chiral catalysts play a crucial role in their synthesis. However, current chiral catalysts encounter challenges pertaining to their separation from products and the recycling process. The utilization of chiral recyclable catalysts not only reduces production costs but also aligns with the growing emphasis on environmentally-friendly chiral synthetic chemistry. These recyclable catalysts exhibit diverse carriers and distinct characteristics. Chemists employ the distinctive attributes of individual carriers to render them recyclable, thereby yielding time and cost savings. This review examines the asymmetric recyclable catalytic reactions reported between January 2017 and October 2023, categorizing them based on carrier solubility, and elucidates the loading techniques, catalytic impacts, recovery approaches, and recycling processes associated with these carriers.

Bridging the incompatibility gap in dual asymmetric catalysis over a thermoresponsive hydrogel-supported catalyst

The integration of dual asymmetric catalysis is highly beneficial for the synthesis of organic molecules with multiple stereocenters. However, two major issues that need to be addressed are the intrinsic deactivation of dual-species and the extrinsic conflict of reaction conditions. To overcome these concerns, we have utilized the compartmental and thermoresponsive properties of poly(N-isopropylacrylamide) (PNIPAM) to develop a cross-linked PNIPAM-hydrogel-supported bifunctional catalyst. This catalyst is designed with Rh(diene) species situated on the outer surface and Ru(diamine) species positioned within the interior of the hydrogel. The compartmental function of PNIPAM in the middle overcomes intrinsic mutual deactivations between the dual-species. The thermoresponsive nature of PNIPAM allows for precise control of catalytic pathways in resolving external conflicts by controlling the reaction switching between an Rh-catalyzed enantioselective 1,4-addition at 50°C and a Ru-catalyzed asymmetric transfer hydrogenation (ATH) at 25°C. As we envisioned, this sequential 1,4-addition/reduction dual enantioselective cascade reaction achieves a transformation from incompatibility to compatibility, resulting in direct access to γ-substituted cyclic alcohols with dual stereocenters in high yields and enantio/diastereoselectivities. Mechanistic investigation reveals a reversible temperature transition between 50°C and 25°C, ensuring a cascade process comprising a 1,4-addition followed by the ATH process.

Thermo-responsive chiral micelles as recyclable organocatalyst for asymmetric Rauhut-Currier reaction in water

Developing eco-friendly chiral organocatalysts with the combined advantages of homogeneous catalysis and heterogeneous processes is greatly desired. In this work, a family of amphiphilic one-handed helical polyisocyanides bearing phosphine pendants is prepared, which self-assembles into well-defined chiral micelles in water and showed thermo-responsiveness with a cloud point of approximately 38.4 °C. The micelles with abundant phosphine moieties at the interior efficiently catalyze asymmetric cross Rauhut-Currier reaction in water. Various water-insoluble substrates are transferred to target products in high yield with excellent enantioselectivity. The yield and enantiomeric excess (ee) of the product generated in water are up to 90% and 96%, respectively. Meanwhile, the yields of the same R-C reaction catalyzed by the polymer itself in organic solvents is <16%, with an ee < 72%. The homogeneous reaction of the chiral micelles in water turns to heterogeneous at temperatures higher than the cloud point, and the catalyst precipitation facilitates product isolation and catalyst recovery. The polymer catalyst is recycled 10 times while maintaining activity and enantioselectivity.

Planar Chirality for Acid/Base Responsive Macrocyclic Pillararenes Induced by Amino Acid Derivatives: Molecular Dynamics Simulations and Machine Learning

Chirality is ubiquitous in nature, ranging from a DNA helix to a biological macromolecule, snail's shell, and even a galaxy. However, the precise control of chirality at the nanoscale is a challenge due to the structure complexity of supramolecular assemblies, the small energy differences between different enantiomers, and the difficulty in obtaining polymorphic crystals. The planar chirality of water-soluble pillar[5]arenes (called WP5-Na with Na ions in the side chain) host triggered by the addition of chiral L-amino acid hydrochloride (L-AA-OEt) guests and acid/base is rationalized by the relative stability of different chiral isomers, being estimated by molecular dynamics (MD) simulations and quantum chemical calculations. As an increase in the pH value, the change from a positive to a negative value of the free energy difference (ΔG) between two conformations, pR-WP5-Na⊃L-AA-OEt and pS-WP5-Na⊃L-AA-OEt, suggests an inversed preference of the pS-WP5-Na conformer induced by the deprotonated L-arginine ethyl ester (L-Arg-OEt) at pH = 14, which is supported by the circular dichroism (CD) experiments. On the basis of 2256 WP5-Na⊃L-Ala-OEt and 3299 WP5-Na⊃L-Arg-OEt conformers sampled from MD, the gradient boosting regression (GBR) model exhibits a satisfactory performance (R² = 0.91) in predicting the chirality of WP5-Na complexations using host-guest binding descriptors, including the geometry matching and binding sites and modes (electrostatics and hydrogen bonding). The machine learning model also performs well on external tests of different hosts (using different side chains and cavity sizes) with the addition of 22 other different guests, with the average chirality prediction accuracy of ML versus experimental CD determinations of 92.8%. The easily accessible host-guest features, binding position coordination and size matching between the cavity and guest, exhibit a close correlation to the chirality of different macrocyclic molecules, water-soluble pillar[6]arenes (WP6) versus WP5, in complexation with different amino acid guests. The exploration of efficient host-guest features in ML displays the great potential of building a large space of various assembled systems and accelerating the on-demand design of chiral supramolecular systems at the nanoscale.

Achiral organoiodine-functionalized helical polyisocyanides for multiple asymmetric dearomative oxidations

Immobilizing organocatalyst onto helical polymers not only facilitates the catalyst recycling from homogeneous reactions, but also boosts enantioselectivity. In this work, achiral organoiodine-functionalized single left- and right-handed helical polyisocyanides were prepared from the same monomers, which catalyzed three asymmetric oxidations gave the desired products in high yields and excellent enantioselectivity. The enantiomeric excess of the target products was up to 95%. Remarkably, the enantioselectivity can be switched by reversing the helicity of the polymer backbone. The polymer catalysts can be facilely recovered and recycled in different asymmetric oxidations with maintained excellent activity and enantioselectivity.

BINOL-Containing Chiral Porous Polymers as Platforms for Enantiorecognition

The enantioselective discrimination of racemic compounds can be achieved through the design and preparation of a new family of chiral conjugated BINOL-porous polymers (CBPPs) from enantiopure (R)- or (S)-BINOL derivatives and 1,3,5-tris(4-phenylboronic acid)benzene or 1,3,5-tris(4-ethynylphenyl)benzene, 1,3,5-triethynyl-2,4,6-trifluorobenzene, and tetra(4-ethynylphenyl)methane as comonomers following Suzuki-Miyaura and Sonogashira-Hagihara carbon-carbon coupling approaches. The obtained CBPPs show high thermal stability, a good specific surface area, and a robust framework and can be applied successfully in the fluorescence recognition of enantiomers of terpenes (limonene and α-pinene) and 1-phenylethylamine. Fluorescence titration of CBPPs-OH in acetonitrile shows that all Sonogashira hosts exhibit a preference for the (R)-enantiomer over the (S)-enantiomer of 1-phenylethylamine, the selectivity being much higher than that of the corresponding BINOL-based soluble system used as a reference. However, the Suzuki host reveals a preference toward (S)-phenylethylamine. Regarding the sensing of terpenes, only Sonogashira hosts show enantiodifferentiation with an almost total preference for the (S)-enantiomer of limonene and α-pinene. Based on the computational simulations and the experimental data, with 1-phenylethylamine as the analyte, chiral recognition is due to the distinctive binding affinities resulting from N···H-O hydrogen bonds and the π-π interaction between the host and the guest. However, for limonene, the geometry of the adsorption complex is mostly governed by the interaction between the hydroxyl group of the BINOL unit and the C═C bond of the iso-propenyl fragment. The synthetic strategy used to prepare CBPPs opens many possibilities to place chiral centers such as BINOL in porous polymers for different chiral applications such as enantiomer recognition.

Switchable aqueous catalytic systems for organic transformations

In living organisms, enzyme catalysis takes place in aqueous media with extraordinary spatiotemporal control and precision. The mechanistic knowledge of enzyme catalysis and related approaches of creating a suitable microenvironment for efficient chemical transformations have been an important source of inspiration for the design of biomimetic artificial catalysts. However, in "nature-like" environments, it has proven difficult for artificial catalysts to promote effective chemical transformations. Besides, control over reaction rate and selectivity are important for smart application purposes. These can be achieved via incorporation of stimuli-responsive features into the structure of smart catalytic systems. Here, we summarize such catalytic systems whose activity can be switched 'on' or 'off' by the application of stimuli in aqueous environments. We describe the switchable catalytic systems capable of performing organic transformations with classification in accordance to the stimulating agent. Switchable catalytic activity in aqueous environments provides new possibilities for the development of smart materials for biomedicine and chemical biology. Moreover, engineering of aqueous catalytic systems can be expected to grow in the coming years with a further broadening of its application to diverse fields.

Post-Modification of Copolymers Obtained by ATRP for an Application in Heterogeneous Asymmetric Salen Catalysis

Copolymers are valuable supports for obtaining heterogeneous catalysts that allow their recycling and therefore substantial savings, particularly in the field of asymmetric catalysis. This contribution reports the use of two comonomers: Azido-3-propylmethacrylate (AZMA) bearing a reactive azide function was associated with 2-methoxyethyl methacrylate (MEMA), used as a spacer, for the ATRP synthesis of copolymers, and then post-functionalized with a propargyl chromium salen complex. The controlled homopolymerization of MEMA by ATRP was firstly described and proved to be more controlled in molar mass than that of AZMA for conversions up to 63%. The ATRP copolymerization of both monomers made it possible to control the molar masses and the composition, with nevertheless a slight increase in the dispersity (from 1.05 to 1.3) when the incorporation ratio of AZMA increased from 10 to 50 mol%. These copolymers were post-functionalized with chromium salen units by click chemistry and their activity was evaluated in the asymmetric ring opening of cyclohexene oxide with trimethylsilyl azide. At an equal catalytic ratio, a significant increase in enantioselectivity was obtained by using the copolymer containing the largest part of salen units, probably allowing, in this case, the more favorable bimetallic activation of both the engaged nucleophile and electrophile. Moreover, the catalytic polymer was recovered by simple filtration and re-engaged in subsequent catalytic runs, up to seven times, without loss of activity or selectivity.

Endohedrally Functionalized Metal-Organic Cage-Cross-Linked Polymer Gels as Modular Heterogeneous Catalysts

The immobilization of homogeneous catalysts onto supports to improve recyclability while maintaining catalytic efficiency is often a trial-and-error process limited by poor control of the local catalyst environment and few strategies to append catalysts to support materials. Here, we introduce a modular heterogenous catalysis platform that addresses these challenges. Our approach leverages the well-defined interiors of self-assembled Pd₁₂L₂₄ metal-organic cages/polyhedra (MOCs): simple mixing of a catalyst-ligand of choice with a polymeric ligand, spacer ligands, and a Pd salt induces self-assembly of Pd₁₂L₂₄-cross-linked polymer gels featuring endohedrally catalyst-functionalized junctions. Semi-empirical calculations show that catalyst incorporation into the MOC junctions of these materials has minimal affect on the MOC geometry, giving rise to well-defined nanoconfined catalyst domains as confirmed experimentally using several techniques. Given the unique network topology of these freestanding gels, they are mechanically robust regardless of their endohedral catalyst composition, allowing them to be physically manipulated and transferred from one reaction to another to achieve multiple rounds of catalysis. Moreover, by decoupling the catalyst environment (interior of MOC junctions) from the physical properties of the support (the polymer matrix), this strategy enables catalysis in environments where homogeneous catalyst analogues are not viable, as demonstrated for the Au(I)-catalyzed cyclization of 4-pentynoic acid in aqueous media.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Recent advances in the asymmetric reduction of imines by recycled catalyst systems

Recent advances relating to the asymmetric reduction of imines to afford optically active amines via recyclable catalyst systems are reviewed.

DNP NMR Spectroscopy Enabled Direct Characterization of Polystyrene-supported Catalyst Species for Synthesis of Glycidyl Esters by Transesterification

Polymer-supported catalysts have been of great interest in organic syntheses, but have suffered from the difficulty in obtaining direct structural information regarding the catalyst species embedded in the polymer due to the limitations of most analytical methods. Here, we show that dynamic nuclear polarization (DNP)-enhanced solid-state NMR is ideally positioned to characterize the ubiquitous cross-linked polystyrene (PS)-supported catalysts, thus enabling molecular-level understanding and rational development. Ammonium-based catalysts, which show excellent catalytic activity and reusability for the transesterification of methyl esters with glycidol, giving glycidyl esters in high yields, were successfully characterized by DNP ¹⁵N NMR spectroscopy at ¹⁵N natural abundance. DNP ¹⁵N NMR shows in particular that the decomposition of quaternary alkylammonium moieties to tertiary amines was completely suppressed during the catalytic reaction. Furthermore, the dilute ring-opened product derived from glycidol and NO₃⁻ was directly characterized by DNP ¹⁵N CPMAS and ¹H–¹⁵N and ¹H–¹³C HETCOR NMR using a ¹⁵N enriched (NO₃) sample, supporting the view that the transesterification mechanism involves an alkoxide anion derived from an epoxide and NO₃⁻. In addition, the detailed analysis of a used catalyst indicated that the adsorption of products on the cationic center is the major deactivation step in this catalysis.

We demonstrated that DNP-enhanced NMR spectroscopy enables the direct and detailed characterization of polymer-supported alkylammonium catalysts.

Chitosan-based nanofibers for enzyme immobilization

The widespread application of soluble enzymes in industrial processes is considered restrict due to instability of enzymes outside optimum operating conditions. For instance, enzyme immobilization can overcome this issue. In fact, chitosan-based nanofibers have outstanding properties, which can improve the efficiency in enzyme immobilization and the stability of enzymes over a wide range of operating conditions. These properties include biodegradability, antimicrobial activity, non-toxicity, presence of functional groups (amino and hydroxyl), large surface area to volume ratio, enhanced porosity and mechanical properties, easy separations and reusability. Therefore, the present review explores the advantages and drawbacks concerning the different methods of enzyme immobilization, including adsorption, cross-linking and entrapment. All these strategies have questions that still need to be addressed, such as elucidation of adsorption mechanism (physisorption or chemisorption); effect of cross-linking reaction on intramolecular and intermolecular interactions and the effect of internal and external diffusional limitations on entrapment of enzymes. Moreover, the current review discusses the challenges and prospects regarding the application of chitosan-based nanofibers in enzyme immobilization, towards maximizing catalytic activity and lifetime.

Nitrogen-Doped Carbon Enables Heterogeneous Asymmetric Insertion of Carbenoids into Amines Catalyzed by Rhodium Nanoparticles

Development of stable heterogeneous catalyst systems is a crucial subject to achieve sustainable society. Though metal nanoparticles are robust species, the study of asymmetric catalysis by them has been restricted because methods to activate metal nanoparticles without causing metal leaching were limited. We developed Rh nanoparticle catalysts (NCI-Rh) supported on nitrogen-doped carbon as a solid ligand to interact with metals for asymmetric insertion of carbenoids into N-H bonds cocatalyzed by chiral phosphoric acid. Nitrogen dopants played a crucial role in both catalytic activity and enantioselectivity while almost no catalysis was observed with Rh nanoparticles immobilized on supports without nitrogen dopants. Various types of chiral α-amino acid derivatives were synthesized in high yields with high enantioselectivities and NCI-Rh could be reused in seven runs. Furthermore, we demonstrated the corresponding continuous-flow reaction using a column packed with NCI-Rh. The desired product was obtained efficiently for over 90 h through the reactivation of NCI-Rh and the chiral source could be recovered.

Horeau amplification in the sequential acylative kinetic resolution of (±)-1,2-diols and (±)-1,3-diols in flow

The sequential acylative kinetic resolution (KR) of C2-symmetric (±)-1,2-syn and (±)-1,3-anti-diols using a packed bed microreactor loaded with the polystyrene-supported isothiourea, HyperBTM, is demonstrated in flow. The sequential KRs of C2-symmetric (±)-1,2-syn and (±)-1,3-anti-diols exploits Horeau amplification, with each composed of two successive KR processes, with each substrate class significantly differing in the relative rate constants for each KR process. Optimisation of the continuous flow set-up for both C2-symmetric (±)-1,2-syn and (±)-1,3-anti-diol substrate classes allowed isolation of reaction products in both high enantiopurity and yield. In addition to the successful KR of C2-symmetric (±)-1,2-syn and (±)-1,3-anti-diols, the application of this process to the more conceptually-complex scenario involving the sequential KR of C1-symmetric (±)-1,3-anti-diols was demonstrated, which involves eight independent rate constants.

One-step hydrothermal synthesis of chiral carbon dots with high asymmetric catalytic activity for an enantioselective direct aldol reaction

Chiral carbon dots are prepared by a simple and one-step hydrothermal reaction at 180 °C for 2 h using citric acid and d-proline as precursors, which show high asymmetric catalytic activity for enantioselective direct aldol condensation. This work provides a hint for the simple preparation of heterogeneous chiral catalysts.

Chiral Graphene Hybrid Materials: Structures, Properties, and Chiral Applications

Chirality has become an important research subject. The research areas associated with chirality are under substantial development. Meanwhile, graphene is a rapidly growing star material and has hard-wired into diverse disciplines. Rational combination of graphene and chirality undoubtedly creates unprecedented functional materials and may also lead to great findings. This hypothesis has been clearly justified by the sizable number of studies. Unfortunately, there has not been any previous review paper summarizing the scattered studies and advancements on this topic so far. This overview paper attempts to review the progress made in chiral materials developed from graphene and their derivatives, with the hope of providing a systemic knowledge about the construction of chiral graphenes and chiral applications thereof. Recently emerging directions, existing challenges, and future perspectives are also presented. It is hoped this paper will arouse more interest and promote further faster progress in these significant research areas.

Enhancing stability by trapping palladium inside N-heterocyclic carbene-functionalized hypercrosslinked polymers for heterogeneous C-C bond formations

Catalyst deactivation caused by the aggregation of active metal species in the reaction process poses great challenges for practical applications of supported metal catalysts in solid-liquid catalysis. Herein, we develop a hypercrosslinked polymer integrated with N-heterocyclic carbene (NHC) as bifunctional support to stabilize palladium in heterogeneous C-C bond formations. This polymer supported palladium catalyst exhibits excellent stability in the one-pot fluorocarbonylation of indoles to four kinds of valuable indole-derived carbonyl compounds in cascade or sequential manner, as well as the representative Suzuki-Miyaura coupling reaction. Investigations on stabilizing effect disclose that this catalyst displays a molecular fence effect in which the coordination of NHC sites and confinement of polymer skeleton contribute together to stabilize the active palladium species in the reaction process. This work provides new insight into the development of supported metal catalysts with high stability and will also boost their efficient applications in advanced synthesis.

Catalyst deactivation caused by the aggregation of active metal species poses great challenges for supported metal catalyzed solid-liquid reactions. Here, the authors develop a hypercrosslinked polymer integrated with N-heterocyclic carbene (NHC) as bifunctional support to stabilize palladium in heterogeneous C-C bond formations.

An overview of recent progress in modern synthetic approach—combinatorial synthesis

Background

In recent times, a powerful tool of combinatorial synthesis has been used for the preparation of large chemical entities through a small set up of reactions between different building blocks using solid-phase and solution-phase techniques. This method reduced the time and cost of the drug discovery process substantially.

Main text

Thousands of compounds are synthesised in a few reactions through combinatorial synthesis instead of getting a few compounds in the traditional method. This method also helps to identify chemical lead of the compounds and optimise them through the biological screening using a high-throughput method. There is no review concerning the recent research finding of combinatorial synthesis. Hence, an attempt had been made on the latest research findings (2002–2020) of newly synthesised compounds using combinatorial synthesis and their biological activities.

Conclusion

To the best of our knowledge, the current review has completely analysed the importance of combinatorial synthesis and furnished an overview of solid-phase and solution-phase techniques as well as helped mankind by improving higher productivity at low cost, lead identification and optimization and preventing environmental pollution.

Graphical abstract