Nickel substituted polyoxometalates in layered double hydroxides as metal-based nanomaterial of POM-LDH for green catalysis effects

Three nickel substituted Keggin-type polyoxometalates, α-[SiW₉O₃₇{Ni(H₂O)}₃]^-10 (denoted as SiW₉Ni₃), was intercalated into Zn₃Al based Layered Double Hydroxide (Zn₃Al-LDH) by the selective ion-exchange technique. The as-synthesized nanocomposite, SiW₉Ni₃@Zn₃Al, was used as heterogeneous nanoreactor to promote the synthesis of drug-like aminoimidazopyridine small molecule skeletons via the well-known Ugi-type Groebke-Blackburn-Bienaymé reaction (GBB 3-CRs) in the absence of any acid/additive and under mild and solvent-free conditions. A synergistic catalytic effect between SiW₉Ni₃ polyoxometalate and Zn₃Al-LDH precursors is evidenced by a higher catalytic property of the SiW₉Ni₃@Zn₃Al composite compared to the individual constituents separately. Lewis/Bronsted acidity of the SiW₉Ni₃ polyoxometalate and Zn₃Al-LDH precursors appear to be essential for the catalytic performance of the composite. Furthermore, the catalytic performance of SiW₉Ni₃@Zn₃Al was also tested in GBB 3-CRs synthesis of amino imidazothiazole under mild and solvent-free conditions.

Recovery of Palladium and Gold from PGM Ore and Concentrates Using ZnAl-Layered Double Hydroxide@zeolitic Imidazolate Framework-8 Nanocomposite

Gold (Au) and palladium (Pd) are platinum group metals (PGMs) that are considered critical in society because they are required in several industrial applications. Their shortage has caused the urgent need for their recovery from secondary resources. Therefore, there is a need to develop functional materials with high adsorption capacity and selectivity for recovery of PGMs from various secondary sources. In this study, a Zn-Al-layered double hydroxide@zeolitic imidazolate framework-8 (Zn–Al–LDH@ZIF–8) nanocomposite was used as an adsorbent for the recovery of Au and Pd from ore concentrates. The Zn–Al–LDH@ZIF–8 nanocomposite was characterised using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, zeta potential, and X-ray diffraction (XRD) spectroscopy. The recovery of Au(III) and Pd(II) was achieved using ultrasound-assisted dispersive µ-solid-phase extraction (UA-D-µ-SPE) and their quantification was attained using an inductively coupled plasma mass spectrometer (ICP-MS). The results showed that the surface of the adsorbent remained positively charged in a wide pH range, which endowed the nanocomposite with high adsorption affinity towards Au(III) and Pd(II). Under optimised conditions, the equilibrium studies revealed that the adsorption of Au(III) and Pd(II) ions followed the Langmuir isotherm model with maximum sorption capacities of 163 mg g−1 and 177 mg g−1 for Au(III) and Pd(II), respectively. The nanocomposite possessed relatively good regeneration, reusability, and stability characteristics, with its performance decreasing by only 10% after five adsorption–desorption cycles.

Layered Double Hydroxide Catalysts Preparation, Characterization and Applications for Process Development: An Environmentally Green Approach

The adage of new generation of fine chemicals process is the best process applied in the absence of conventional methods. However, many methods use different reaction parameters, such as basic and acidic catalysts, for example oxidation, reduction, bromination, water splitting, cyanohydrin, ethoxylation, syngas, aldol condensation, Michael addition, asymmetric ring opening of epoxides, epoxidation, Wittig and Heck reaction, asymmetric ester epoxidation of fatty acids, combustion of methane, NOx reduction, biodiesel synthesis, propylene oxide polymerization. Layered Double Hydroxides (LDHs) have received considerable attention due their potential applications in flame retardant and has excellent medicinal property for reducing acidity. These catalysts are characterized using analytical techniques, such as: X-ray diffraction (XRD), Fourier-transform infrared (FT-IR), Raman spectroscopy, Thermogravimetric-Differential Thermal Analyzer (TG-DTA), Scanning electron microscope (SEM), Transmission electron microscopes (TEM), Brunauer-Emmett-Teller (BET) surface area, N2 Adsorption-desorption, Temperature programmed reduction (TPR), X-ray photoelectrons spectroscopy (XPS), which gives its overall picture of its structure, porosity, morphology, thermal stability, reusability, and activity of catalysts. LDHs catalysts have proven to be economic and environmentally friendly. The above discussed applications make these catalysts unique from Green Chemistry point of view since they are reusable, and eco-friendly catalysts. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Multifunctional magnetic MgMn-oxide composite for efficient purification of Cd2+ and paracetamol pollution: Synergetic effect and stability

A multifunctional magnetic composite (0.3Ma-MgMnLDO-a) with the function of Cd²⁺ adsorption and paracetamol (PAM) degradation was successfully fabricated. Surface morphology showed that Fe₃O₄ agglomeration was overcome on composite. The composite had high specific surface area of 105.32 m² g^-1 and saturation magnetization of 40 emu∙g^-1. 0.3Ma-MgMnLDO-a could reach Cd²⁺ adsorption equilibrium within 5 min with 99 % removal rate. The maximum adsorption capacity was 3.76 mmol·g^-1 (422.62 mg g^-1), which apparently higher than that of Fe₃O₄-a and MgMnLDO-a, indicating that the Fe/Mn synergism results in excellent ability for Cd²⁺ adsorption. Moreover, the composite could efficiently activate peroxymonosulfate (PMS) to rapid degrade PAM with the highest first-order rate constants (k_obs = 0.116 min^-1) and total organic carbon (TOC) removal rate (67.7 %), which also due to the contribution of Fe/Mn synergism in PMS activation. The cycling of Mn^III/Mn^IV and Fe^II/Fe^III played an important role in activating PMS to generateO₂^-•, ¹O₂ and OH for degradation. The composite exhibited both stable adsorption and catalytic performance on wide pH (3-9) and five reuse cycles. Notably, there was mutual promotion between Cd²⁺ and PAM adsorption, while the coexistence of Cd²⁺ had slight inhibition on PAM degradation. Overall, the magnetic composite had promising application for purifying heavy metals and pharmaceuticals.

Engineering polyoxometalate-intercalated layered double hydroxides for catalytic applications

Polyoxometalate-intercalated layered double hydroxide (POM-LDH) nanocomposites have received considerable attention in recent years because such nanocomposites not only inherit the intrinsic properties of POMs and LDHs but also exert significant synergistic effects during the catalytic process. In this frontier article, we present the latest advances on the POM-LDH nanocomposites ranging from new synthetic methods to catalytic applications. By making use of the host layer modification method and exfoliation assembly method, the as-prepared POM-LDH nanocomposites show a wide range of catalytic applications. The challenges and future opportunities are also discussed by highlighting some creative work on related POM- or LDH-based materials.

Sandwich type polyoxometalates encapsulated into the mesoporous material: synthesis, characterization and catalytic application in the selective oxidation of sulfides

The A-type sandwich polyoxometalates of [(HOSn^IVOH)₃(PW₉O₃₄)₂]¹²⁻ (P₂W₁₈Sn₃) and [(OCe^IVO)₃(PW₉O₃₄)₂]¹²⁻ (P₂W₁₈Ce₃) were immobilized for the first time into the porous metal–organic framework MIL-101(Cr). FT-IR, powder X-ray diffraction, SEM-EDX, ICP analysis, N₂ adsorption and thermogravimetric analysis collectively confirmed immobilization and good distribution of polyoxometalates into cages of MIL-101(Cr). The catalytic activities of the homogeneous P₂W₁₈Sn₃ and P₂W₁₈Ce₃ and the corresponding heterogeneous catalysts were examined in the oxidation of sulfides to sulfones with H₂O₂ as the oxidant at room temperature. The effects of different dosages of polyoxometalates, type of solvent, reaction time, amount of catalyst and oxidant in this catalytic system were investigated. The new P₂W₁₈Sn₃@MIL-101 and P₂W₁₈Ce₃@MIL-101 nanocomposites exhibited good recyclability and reusability in at least five consecutive reaction cycles without significant loss of activity or selectivity.

The A-type sandwich POMs of [(HOSn^IVOH)₃(PW₉O₃₄)₂]^12– (P₂W₁₈Sn₃) and [(OCe^IVO)₃(PW₉O₃₄)₂]^12– (P₂W₁₈Ce₃) were immobilized for the first time into the porous MIL-101 MOF. Their catalytic activities were examined in the oxidation of sulfides to sulfones at room temperature.