Porous matrix materials in optical sensing of gaseous oxygen

The review provides comparison of porous materials that act as a matrix for luminescent oxygen indicators. These include silica-gels, sol–gel materials based on silica and organically modified silica (Ormosils), aerogels, electrospun polymeric nanofibers, metal–organic frameworks, anodized alumina, and various other microstructured sensor matrices. The influence of material structure and composition on the efficiency of oxygen quenching and dynamic response times is compared and the advantages and disadvantages of the materials are summarized to give a guide for design and practical application of sensors with desired sensitivity and response time.

New GSH-responsive amphiphilic zinc(II) phthalocyanine micelles as efficient drug carriers for combinatorial cancer therapy

Combination therapies for the treatment of cancer have attracted wide attention. The poor selectivity and biocompatibility of photosensitizers (PS) limit the use of combination therapies in chemotherapy and photodynamic therapy (PDT) for cancer. In this work, the Gender PS (mPEG-[Formula: see text]-PLA-S-S-ZnPC), asymmetric zinc(II) phthalocyanine (ZnPC) and mono-methoxy oxygen-based polyethylene glycol-polylactic acid (mPEG-b-PLA) were designed and synthesized for PDT through disulfide bond (-S-S-). The amphipathic PS could be self-assembled into a micelle in aqueous solution, and paclitaxel (PTX) was encapsulated in the core of the micelle for chemotherapy (PTX/mPEG-[Formula: see text]-PLA-S-S-ZnPc). The PTX/mPEG-[Formula: see text]-PLA-S-S-ZnPc micelle was spherical with a uniform diameter of about 184 nm. At the first 48 h, the release behaviors of ZnPC and PTX at 10 mmol / L GSH were 30% and 75.2%, respectively. These results suggested that GSH-responsive PTX/mPEG-[Formula: see text]-PLA-S-S-ZnPc micelle was an active ingredient in combination therapies for cancer.

Polymer matrix: A good substrate material for oxygen probes used in pressure sensitive paints

Over the past few years, surface pressure measurement has fundamental importance in many areas, particularly, aerodynamic research. Conventional methods involve pressure taps, but due to the nature of these pressure taps, only pressure information of isolated points on model surface is available, which limit their applications in aerodynamics studies. Recently the newly developed approach, pressure sensitive paint (PSP) has revolutionized such pressure measurements and various PSP materials have been developed for aerodynamics research. Hence, the main focus of this review is to study the interactions of polymers with different oxygen probes and polymeric role as supporting material in the maturation of PSP. In this review, the selected PSP materials are categorically elucidated in terms of their advantages and limitations to give a fair insight about their applicability. Further, we have summarized and articulated such particular optical oxygen sensing materials either that have been used as PSP or have potential to be used as PSP materials.

Novel Platinum-Porphyrin as Sensing Compound for Efficient Fluorescent and Electrochemical Detection of H2O2

Metalloporphyrins are highly recognized for their capacity to act as sensitive substances used in formulation of optical, fluorescent, and electrochemical sensors. A novel compound, namely Pt(II)-5,10,15,20-tetra-(4-allyloxy-phenyl) porphyrin, was synthesized by metalation with PtCl2(PhCN)2 of the corresponding porphyrin base and was fully characterized by UV-vis, fluorimetry, FT-IR, 1H-NMR, and 13C-NMR methods. The fluorescence response of this Pt-porphyrin in the presence of different concentrations of hydrogen peroxide was investigated. Besides, modified glassy carbon electrodes with this Pt-porphyrin (Pt-Porf-GCE) were realized and several electrochemical characterizations were comparatively performed with bare glassy carbon electrodes (GCE), in the absence or presence of hydrogen peroxide. The Pt-porphyrin demonstrated to be a successful sensitive material for the detection of hydrogen peroxide both by fluorimetric method in a concentration range relevant for biological samples (1.05–3.9 × 10−7 M) and by electrochemical method, in a larger concentration range from 1 × 10−6 M to 5 × 10−5 M. Based on different methods, this Pt-porphyrin can cover detection in diverse fields, from medical tests to food and agricultural monitoring, proving high accuracy (correlation coefficients over 99%) in both fluorimetric and electrochemical measurements.

Quinoline-annulated porphyrin platinum complexes as NIR emitters

The platinum(II) complexes of known quinoline-annulated porphyrins were prepared and spectroscopically characterized. Their optical properties (UV-vis absorption and phosphorescence spectra and phosphorescence lifetimes) were recorded and contrasted against their 2,3-dioxoporphyrin precursor platinum(II) complex. The absorbance and emission spectra (in EtOH glass at 77 K) of the quinoline-annulated porphyrins fall within the NIR optical window of tissue, ranging, depending on the derivative, between [Formula: see text]950 and 1200 nm. The much red-shifted optical spectra, when compared to their non-quinoline-annulated precursors, are attributed to the [Formula: see text]-extension and conformational non-planarity that the annulation causes. The emission yields of the mono-quinoline-annulated derivatives are too low and their lifetimes too short to be practical emitters, but the bis-annulated derivative possesses a practical lifetime and emission yield, suggesting its further exploration, particularly since the methodology toward the solubilization of the quinoline-annulated porphyrins in biological media through derivatization is known.

Facile Preparation of Hybrid Structure Based on Mesodome and Micropillar Arrays as Flexible Electronic Skin with Tunable Sensitivity and Detection Range

The development of flexible pressure sensors has attracted increasing research interest for potential applications such as wearable electronic skins and human healthcare monitoring. Herein, we demonstrated a piezoresistive pressure sensor based on AgNWs-coated hybrid architecture consisting of mesoscaled dome and microscaled pillar arrays. We experimentally showed that the key three-dimensional component for a pressure sensor can be conveniently acquired using a vacuum application during the spin-coating process instead of a sophisticated and expensive approach. The demonstrated hybrid structure exhibits dramatically improved sensing capability when compared with the conventional one-fold dome-based counterpart in terms of the sensitivity and detectable pressure range. The optimized sensing performance, by integrating D1000 dome and D50P100 MPA, reaches a superior sensitivity of 128.29 kPa^-1 (0-200 Pa), 1.28 kPa^-1 (0.2-10 kPa), and 0.26 kPa^-1 (10-80 kPa) and a detection limit of 2.5 Pa with excellent durability. As a proof-of-concept, the pressure sensor based on the hybrid configuration was demonstrated as a versatile platform to accurately monitor different kinds of physical signals or pressure sources, e.g., wrist pulse, voice vibration, finger bending/touching, gas flow, as well as address spatial loading. We believe that the proposed architecture and developed methodology can be promising for future applications including flexible electronic devices, artificial skins, and interactive robotics.

Photo-patterned oxygen sensing films based on Pt porphyrin for controlling cell growth and studying metabolism

A new type of biocompatible and photo-polymerizable hydrogel with oxygen sensors for microengineering was developed. Herein, a red emitter as an oxygen probe which was chemically immobilized in a poly(2-hydroxyethyl methacrylate)-co-polyacrylamide-based matrix was expected to monitor cell metabolism. A few micropatterned films with gratings (5, 7, 10, 20, and 50 μm in width, respectively and with 1.2 μm in height) were designed and fabricated by photo-lithography using these hydrogels. SEM and AFM were used to validate these films to attain their lateral width and vertical depth. The oxygen responses of these films were characterized. Results showed that patterned films exhibited higher sensitivity than the non-patterned films. The films' construction can also have some influence on cell alignment and elongation. This phenomenon was evaluated by culturing human cervical cancer cells (HeLa cells) and mouse embryo fibroblasts (3T3-L1), on the film surfaces with different construction. Linear correlation between cell elongation and the logarithm of grating width was observed. Real-time monitoring of oxygen consumption of HeLa cells in cell culture medium was achieved. This study is expected to have potential to be applied in micro-structured design and to help understanding metabolism.

Potentiometric Sensors for Iodide and Bromide Based on Pt(II)-Porphyrin

Pt(II) 5,10,15,20-tetra(4-methoxy-phenyl)-porphyrin (PtTMeOPP) was used in the construction of new ion-selective sensors. The potentiometric response characteristics (slope and selectivity) of iodide and bromide-selective electrodes based on (PtTMeOPP) metalloporphyrin in o-nitrophenyloctylether (NPOE), dioctylphtalate (DOP) and dioctylsebacate (DOS) plasticized poly(vinyl chloride) membranes are compared. The best results were obtained for the membranes plasticized with DOP and NPOE. The sensors have linear responses with near-Nernstian slopes toward bromide and iodide ions and good selectivity. The membrane plasticized with NPOE was electrochemically characterized using the EIS method to determine its water absorption and the diffusion coefficient into the membrane.

Silver Nanowire-Induced Sensitivity Enhancement of Optical Oxygen Sensors Based on AgNWs-Palladium Octaethylporphine-Poly(methyl methacrylate) Microfiber Mats Prepared by Electrospinning

Sensitivity enhancement of optical oxygen sensors is crucial for the characterization of nearly anoxic systems and oxygen quantification in trace amounts. In this work, for the first time we presented the introduction of silver nanowires (AgNWs) as a sensitivity booster for optical oxygen sensors based on AgNWs-palladium octaethylporphine-poly(methyl methacrylate) (AgNWs@PdOEP-PMMA) microfiber mats prepared by electrospinning. Herein, a series of sensing microfiber mats with different loading ratios of high aspect ratio AgNWs were fabricated, and the corresponding sensitivity enhancement was systematically investigated. With increasing incorporated ratios, the AgNWs@PdOEP-PMMA-sensing microfiber mats exhibited a swift response (approx. 1.8 s) and a dramatic sensitivity enhancement (by 243% for the range of oxygen concentration 0-10% and 235% for the range of oxygen concentration 0-100%) when compared to the pure PdOEP-PMMA microfiber mat. Additionally, the as-prepared sensing films were experimentally confirmed to be highly photostable and reproducible. The advantages of AgNW-induced sensitivity enhancement could be useful for the rational design and realization of revolutionary highly sensitive sensors and expected to be readily applicable to many other high-performance gas sensor devices.

Electrospun nanofibers and spin coated films prepared from side-chain copolymers with chemically bounded platinum (II) porphyrin moieties for oxygen sensing and pressure sensitive paints

Pressure sensitive paints (PSP) containing oxygen probes were primarily used to measure air pressure. In this perspective, a polymerizable methacrylate-derived tetraphenylporphinato platinum(II) (PtTPP-MA) monomer was copolymerized with acrylic/vinyl monomers to produce four different copolymers. Octafluoropentyl methacrylate (OCFPM) and pentafluorophenyl acrylate (PFPA) were used as fluorinated monomers. Methyl methacrylate (MMA) and styrene (S) were used as non-fluorinated monomers. The structures and physical properties of the polymers were confirmed by ¹H NMR, ¹⁹F NMR, GPC, and DSC. Experimental conditions were optimized to get fine nanofibers. Pressure sensing electrospun membranes and spin coated films were fabricated. Nanofibers showed fast response and good sensitivity towards gaseous oxygen. The influence of types of substrate and polymer natures on response time, oxygen sensitivity, and pressure responses were deliberated. Among our synthesized copolymers, poly(PS-co-PFPA-co-OCFPM-co-PtTPPMA) (Polymer P3) showed fast response time and good pressure sensitivity both as spin coated films and nanofibers.

Oxygen Sensing, Hypoxia Tracing and in Vivo Imaging with Functional Metalloprobes for the Early Detection of Non-communicable Diseases

Hypoxia has been identified as one of the hallmarks of tumor environments and a prognosis factor in many cancers. The development of ideal chemical probes for imaging and sensing of hypoxia remains elusive. Crucial characteristics would include a measurable response to subtle variations of pO2 in living systems and an ability to accumulate only in the areas of interest (e.g., targeting hypoxia tissues) whilst exhibiting kinetic stabilities in vitro and in vivo. A sensitive probe would comprise platforms for applications in imaging and therapy for non-communicable diseases (NCDs) relying on sensitive detection of pO2. Just a handful of probes for the in vivo imaging of hypoxia [mainly using positron emission tomography (PET)] have reached the clinical research stage. Many chemical compounds, whilst presenting promising in vitro results as oxygen-sensing probes, are facing considerable disadvantages regarding their general application in vivo. The mechanisms of action of many hypoxia tracers have not been entirely rationalized, especially in the case of metallo-probes. An insight into the hypoxia selectivity mechanisms can allow an optimization of current imaging probes candidates and this will be explored hereby. The mechanistic understanding of the modes of action of coordination compounds under oxygen concentration gradients in living cells allows an expansion of the scope of compounds toward in vivo applications which, in turn, would help translate these into clinical applications. We summarize hereby some of the recent research efforts made toward the discovery of new oxygen sensing molecules having a metal-ligand core. We discuss their applications in vitro and/or in vivo, with an appreciation of a plethora of molecular imaging techniques (mainly reliant on nuclear medicine techniques) currently applied in the detection and tracing of hypoxia in the preclinical and clinical setups. The design of imaging/sensing probe for early-stage diagnosis would longer term avoid invasive procedures providing platforms for therapy monitoring in a variety of NCDs and, particularly, in cancers.