Protein-Aided Synthesis of Copper-Integrated Polyaniline Nanocomposite Encapsulated with Reduced Graphene Oxide for Highly Sensitive Electrochemical Detection of Dimetridazole in Real Samples

Dimetridazole (DMZ) is a derivative of nitroimidazole and is a veterinary drug used as an antibiotic to treat bacterial or protozoal infections in poultry. The residues of DMZ cause harmful side effects in human beings. Thus, we have constructed a superior electrocatalyst for DMZ detection. A copper (Cu)-integrated poly(aniline) (PANI) electrocatalyst (PANI-Cu@BSA) was prepared by using a one-step method of biomimetic mineralization and polymerization using bovine serum albumin (BSA) as a stabilizer. Then, the synthesized PANI-Cu@BSA was encapsulated with reduced graphene oxide (rGO) using an ultrasonication method. The PANI-Cu@BSA/rGO nanocomposite had superior water dispersibility, high electrical conductivity, and nanoscale particles. Moreover, a PANI-Cu@BSA/rGO nanocomposite-modified, screen-printed carbon electrode was used for the sensitive electrochemical detection of DMZ. In phosphate buffer solution, the PANI-Cu@BSA/rGO/SPCE displayed a current intensity greater than PANI-Cu@BSA/SPCE, rGO/SPCE, and bare SPCE. This is because PANI-Cu@BSA combined with rGO increases fast electron transfer between the electrode and analyte, and this synergy results in analyte-electrode junctions with extraordinary conductivity and active surface areas. PANI-Cu@BSA/rGO/SPCE had a low detection limit, a high sensitivity, and a linear range of 1.78 nM, 5.96 μA μM-1 cm-2, and 0.79 to 2057 μM, respectively. The selective examination of DMZ was achieved with interfering molecules, and the PANI-Cu@BSA/rGO/SPCE showed excellent selectivity, stability, repeatability, and practicability.

Development of fluorophoric [2]pseudorotaxanes and [2]rotaxane: selective sensing of Zn(II)

Fluorophoric [2]pseudorotaxanes {NiPR1(ClO4)2-NiPR3(ClO4)2} are synthesized by utilizing newly designed fluorophoric bidentate ligands (L1-L3) and a heteroditopic naphthalene containing macrocycle (NaphMC) with high yields via Ni(II) templation and π-π stacking interactions. Subsequently, a fluorophoric [2]rotaxane (NAPRTX) is established through a Cu(I) catalysed click reaction between an azide terminated pseudorotaxane, {NiPR4(ClO4)2}, which contains the newly designed fluorophoric ligand L4, and alkyne terminated bulky stopper units. All these fluorophoric [2]pseudorotaxanes and the [2]rotaxane were characterized using numerous techniques such as mass spectrometry, NMR, UV/Vis, PL, and elemental analysis, wherever applicable. Furthermore, to investigate the effect of the fluorophoric moieties, the coordinating ability of chelating units, and size and shape of the three dimensional cavity generated by the mechanical bond in the interlocked [2]rotaxane (NAPRTX), we have performed a sensing study of various metal ions. Thus, the interlocked [2]rotaxane is found to have potential as a selective fluorescent sensor for Zn(II) metal ions over other transition, alkali and alkaline earth metal ions, where the 2,2'-bipyridyl arylvinylene moiety of the axle acts as a fluorescence signalling unit.

New Concept for the Study of the Fluid Dynamics of Lithium Extraction Using Calix[4]arene Derivatives in T-Type Microreactor Systems

Lithium extraction remains a challenge in the hydrometallurgy process due to its economic value and maldistribution sources. Employing calix[4]arene derivatives in solvent extraction techniques results in high selectivity and extraction capability, but a slow extraction rate. The slow kinetics of batch-wise extraction can be drastically accelerated by using a T-type microreactor system. Therefore, a combination of calix[4]arene and a microreactor system serves as an ideal platform for efficient lithium extraction. In this work, the fluid dynamics of lithium extraction using a monoacetic acid calix[4]arene derivative in a T-type microreactor system were studied. Increasing the O/A ratio increases the average length, surface area, and volume of the organic droplets, but decreases the specific surface area. In contrast, increasing the Reynolds number decreases the average length, surface area, and volume of the organic droplets, but increases the specific surface area. It was found that shorter diffusion distance, larger specific surface area, and faster vortex velocity were the factors that play the most pivotal roles in achieving great extraction rate enhancement in T-type microreactor systems compared to batch-wise systems. These findings represent an important new concept in the study of the fluid dynamics of lithium extraction using monoacetic acid calix[4]arene derivatives in T-type microreactor systems.

A Cd(ii) and Zn(ii) selective naphthyl based [2]rotaxane acts as an exclusive Zn(ii) sensor upon further functionalization with pyrene

A new multi-functional [2]rotaxane, ROTX, has been synthesized via a Cu(i) catalysed azide-alkyne cycloaddition reaction between Ni(ii) templated azide terminated pseudorotaxane composed of a naphthalene based heteroditopic wheel, NaphMC, and an alkyne terminated stopper. Subsequently, ROTX has been functionalized with pyrene moieties to develop a bifluorophoric [2]rotaxane, PYROTX, having naphthalene and pyrene moieties. Detailed characterization of these two rotaxanes is performed by utilizing several techniques such as ESI-MS, (1D and 2D) NMR, UV/Vis and PL studies. Comparative metal ion sensing studies of NaphMC (a fluorophoric cyclic receptor), ROTX ([2]rotaxane with a naphthyl fluorophore) and PYROTX ([2]rotaxane having naphthyl and pyrene fluorophores) have been performed to determine the effect of dimensionality/functionalization on the metal ion selectivity. Although NaphMC fails to discriminate between metal ions, ROTX serves as a selective sensor for Zn(ii) and Cd(ii). Importantly, PYROTX shows exclusive selectivity towards Zn(ii) over various transition, alkali and alkaline earth metal ions including Cd(ii).

Host-guest complexation studies of NO3, NO2, CO2, and N2 gas with the calix[4]arene molecule

Calix[n]arenes (abbreviated as CX[n]) are the macro-molecules based on phenol groups with a hydrophobic cavity to encapsulate a gas or small molecules. They are used as molecular vehicles. For instance, these molecules are used in the activation of the solubility of monomers in the specific media and in pharmaceutical drug delivery. The limit of the development of gaseous pollutants will be a vital subject in the future. The polluting gases NO₃, NO₂, CO₂, N₂, etc., need cage molecules, such as CX[4], to be encapsulated. In this report, the red shift of the H-bonding interactions of the CX[4]-gas (by adding the gas inside or outside the cavity) is clearly explained by the vibrational analysis. The electronic spectra of the complexes of CX[4] with NO₃, NO₂, CO₂, and N₂) exhibit a blue-shift pick in comparison with the ones observed for the CX[4] molecule. The electrophilic and nucleophilic sites of the stable host-guest have been investigated. Additionally, the non-covalent interactions have been calculated based on the reduced density gradient RDG and QTAIM theory.

Colorimetric dual sensor for Cu(II) and tyrosine and its application as paper strips for detection in water and human saliva as real samples

A calix[4]arene based compound incorporating amide and morpholine moieties has been synthesized and its ion recognition property towards metal ions and application of its metal complex towards sensing of amino acids has been investigated. The synthesized compound interacts with Cu²⁺ with high selectivity and sensitivity (LOD, 0.1 ppb) in aqueous media with instant color change from colorless to yellow without interference from any other metal ions used in this study. The molecular structure of the calix compound (1) has been determined by single crystal X-ray study and the structure of its Cu²⁺ complex has been established by DFT calculation. The Cu²⁺ complex of 1 selectively detects tyrosine (LOD, 1.2 ppm) in water with distinct color change and without any interference from other 22 amino acids used in this study. The mechanism for detection of tyrosine with color change is also presented. For easy field application, paper based sensor strips have been prepared by coating compound 1 and its Cu²⁺ complex on filter paper, which have been used for semi-quantitative measurement of Cu²⁺ and tyrosine. Compound 1 and its Cu²⁺ complex have also been used for detection of Cu²⁺ and tyrosine, respectively in water and human saliva as real samples and satisfactory results are obtained.

A luminescent on–off probe based calix[4]arene linked through triazole with ruthenium(ii) polypyridine complexes to sense copper(ii) and sulfide ions

The supramolecular sensor Ru2L was designed by joining a bis-ruthenium(ii) polypyridyl complex with a p-tert-butyl calix[4]arene platform through a 1,2,3-triazole linker and used for sensing of copper(ii) and sulfide ions by fluorescence.

Sensitivity limits of biosensors used for the detection of metals in drinking water

Even when present in very low concentrations, certain metal ions can have significant health impacts depending on their concentration when present in drinking water. In an effort to detect and identify trace amounts of such metals, environmental monitoring has created a demand for new and improved methods that have ever-increasing sensitivities and selectivity. This paper reviews the sensitivities of over 100 recently published biosensors using various analytical techniques such as fluorescence, voltammetry, inductively coupled plasma techniques, spectrophotometry and visual colorimetric detection that display selectivity for copper, cadmium, lead, mercury and/or aluminium in aqueous solutions.

Preparation of Macrometallocycle and Selective Sensor for Copper Ion

Two bis-imidazolium salts 1,8-bis[2'-(N-R-imidazoliumyl)acetylamino]naphthalene chloride (L1H4·Cl2: R = Et; L2H4·Cl2: R = nBu), as well as their four NHC metal complexes [L1H2Ag]Cl (1), [L1Ni] (2), [L2Ni] (3) and [L1H2Hg(HgCl4)] (4) have been synthesized. In each of the cationic moieties of complexes 1 or 4, there is a groove-like 14-membered macrometallocycle, and each macrometallocycle is consisted of one biscarbene ligand L1H2 and one metal ion (silver(I) ion for 1 and mercury(II) ion for 4). Three 6-membered cycles are contained in each molecule of complexes 2 or 3. Additionally, the selective recognition of macrometallocycle 1 for Cu2+ was studied with the methods of fluorescence and ultraviolet spectroscopy, 1H NMR titrations, MS and IR spectra. The experimental results display macrometallocycle 1 can discriminate Cu2+ from other cations effectively.