3D net-like Co3O4@NiO nanostructures for high performance supercapacitors

Co3O4@NiO composite electrode materials were successfully synthesized by a two-step hydrothermal method followed by annealing treatment. Due to their three-dimensional network structure, these composite materials exhibited a large specific surface area, enhancing their electrochemical performance. Consequently, the Co3O4@NiO electrode demonstrated a specific capacitance of 1306 F g-1 at a current density of 1 A g-1, an excellent specific capacitance retention rate of 95.5% after 3000 cycles even at 8 A g-1 and a coulombic efficiency approaching 100%. These outstanding properties make the Co3O4@NiO composite materials promising electrode materials for high performance supercapacitors.

Trimetallic Oxides/GO Composites Optimized with Carbon Ions Radiations for Supercapacitive Electrodes

Hydrothermally synthesized electrodes of Co3O4@MnO2@NiO/GO were produced for use in supercapacitors. Graphene oxide (GO) was incorporated into the nanocomposites used for electrode synthesis due to its great surface area and electrical conductivity. The synergistic alliance among these composites and GO enhances electrode performance, life span, and stability. The structural properties obtained from the X-ray diffraction (XRD) results suggest that nanocomposites are crystalline in nature. The synergistic alliance among these composites and GO enhances electrode performance, life span, and stability. Performance assessment of these electrodes indicates that their characteristic performance was enhanced by C2+ radiation, with the uttermost performance witnessed for electrodes radiated with 5.0 × 1015 ions/cm2.

Design and synthesis of a 3D graphene-enhanced electrode for fast charge/ion transport for lithium storage

Design and fabrication of an N-graphene-enhanced anode with a hierarchical morphology and a unique electronic structure that exhibits superior electrochemical performances in LIBs.

Ultrasonication-mediated nitrogen-doped multiwalled carbon nanotubes involving carboxy methylcellulose composite for solid-state supercapacitor applications

In this study, a novel nanohybrid composite containing nitrogen-doped multiwalled carbon nanotubes/carboxymethylcellulose (N-MWCNT/CMC) was synthesized for supercapacitor applications. The synthesized composite materials were subjected to an ultrasonication-mediated solvothermal hydrothermal reaction. The synthesized nanohybrid composite electrode material was characterized using analytical methods to confirm its structure and morphology. The electrochemical properties of the composite electrode were investigated using cyclic voltammetry (CV), galvanic charge-discharge, and electrochemical impedance spectroscopy (EIS) using a 3 M KOH electrolyte. The fabricated composite material exhibited unique electrochemical properties by delivering a maximum specific capacitance of approximately 274 F g^-1 at a current density of 2 A g^-1. The composite electrode displayed high cycling stability of 96% after 4000 cycles at 2 A g^-1, indicating that it is favorable for supercapacitor applications.

Supercapacitive Performance of N-Doped Graphene/Mn3O4/Fe3O4 as an Electrode Material

Nitrogen-doped graphene (NDG) and mixed metal oxides have been attracting much attention as the combination of these materials resulted in enhanced electrochemical properties. In this study, a composite of nitrogen-doped graphene/manganese oxide/iron oxide (NDG/Mn3O4/Fe3O4) for a supercapacitor was prepared through the hydrothermal method, followed by freeze-drying. Field emission scanning electron microscopy (FESEM) images revealed that the NDG/Mn3O4/Fe3O4 composite displayed wrinkled-like sheets morphology with Mn3O4 and Fe3O4 particles attached on the surface of NDG. The presence of NDG, Mn3O4, and Fe3O4 was characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The electrochemical studies revealed that the NDG/Mn3O4/Fe3O4 composite exhibited the highest specific capacitance (158.46 F/g) compared to NDG/Fe3O4 (130.41 F/g), NDG/Mn3O4 (147.55 F/g), and NDG (74.35 F/g) in 1 M Na2SO4 at a scan rate of 50 mV/s due to the synergistic effect between bimetallic oxides, which provide richer redox reaction and high conductivity. The galvanostatic charge discharge (GCD) result demonstrated that, at a current density of 0.5 A/g, the discharging time of NDG/Mn3O4/Fe3O4 is the longest compared to NDG/Mn3O4 and NDG/Fe3O4, indicating that it had the largest charge storage capacity. NDG/Mn3O4/Fe3O4 also exhibited the smallest resistance of charge transfer (Rct) value (1.35 Ω), showing its excellent charge transfer behavior at the interface region and good cyclic stability by manifesting a capacity retention of 100.4%, even after 5000 cycles.

Recent Advances in Metal Chalcogenides (MX; X = S, Se) Nanostructures for Electrochemical Supercapacitor Applications: A Brief Review

Supercapacitors (SCs) have received a great deal of attention and play an important role for future self-powered devices, mainly owing to their higher power density. Among all types of electrical energy storage devices, electrochemical supercapacitors are considered to be the most promising because of their superior performance characteristics, including short charging time, high power density, safety, easy fabrication procedures, and long operational life. An SC consists of two foremost components, namely electrode materials, and electrolyte. The selection of appropriate electrode materials with rational nanostructured designs has resulted in improved electrochemical properties for high performance and has reduced the cost of SCs. In this review, we mainly spotlight the non-metallic oxide, especially metal chalcogenides (MX; X = S, Se) based nanostructured electrode materials for electrochemical SCs. Different non-metallic oxide materials are highlighted in various categories, such as transition metal sulfides and selenides materials. Finally, the designing strategy and future improvements on metal chalcogenide materials for the application of electrochemical SCs are also discussed.

Flower-like Ni–Co hydroxides on Ni foam for high-performance supercapacitor applications

Self-supporting Ni–Co hydroxides were synthesized, which exhibit a high areal capacity.