Carboxymethylcellulose/Agar-Based Multifunctional Films Incorporated with Zn-Doped SnO2 Nanoparticles for Active Food Packaging Application

SnO2 and Zn-SnO2 nanoparticles were prepared by chemical precipitation, and the rutile phase of SnO2 was confirmed through X-ray diffraction studies. X-ray photoelectron spectroscopy (XPS) confirmed the doping of SnO2 with Zn and elucidated the surface chemistry before and after doping. The average sizes of SnO2 and Zn-SnO2 nanoparticles determined using TEM were 3.96 ± 0.85 and 3.72 ± 0.9 nm, respectively. UV-visible and photoluminescence spectrophotometry were used to evaluate the optical properties of SnO2 and Zn-SnO2 nanoparticles, and their energy gaps (Eg) were 3.8 and 3.9 eV, respectively. The antibacterial activity of these nanoparticles against Salmonella enterica and Staphylococcus aureus was evaluated under dark and light conditions. Antibacterial activity was higher in light, showing the highest activity (99.5%) against S. enterica. Carboxymethylcellulose (CMC)/agar-based functional composite films were prepared by adding different amounts of SnO2 and Zn-SnO2 nanoparticles (1 and 3 wt % of polymers). The composite film showed significantly increased UV barrier properties while maintaining the mechanical properties, water vapor barrier, and transparency compared to the neat CMC/agar film. These composite films showed significant antibacterial activity; however, the Zn-SnO2-added film showed stronger antibacterial activity (99.2%) than the SnO2-added film (15%).

Improved performance of Zn-doped SnO2 modified g-C3N4 for visible light-driven photocatalysis

The low-cost composite of g-C₃N₄ modified by Zn-doped SnO₂ nanoparticles was prepared for the first time in this work. The characterization results of XRD and SEM demonstrated that Zn was successfully doped into SnO₂. The formed Sn-O-Zn bonds and interaction between the Zn-doped SnO₂ sample and g-C₃N₄ in the composite were explored by FT-IR and XPS technologies. Photocatalytic degradation experiments showed that the as-prepared optimal composite photocatalyst displayed enhanced photocatalytic reactivity towards both dyes and antibiotics, which could degrade 85.6% of RhB and 86.8% of tetracycline within 30 and 90 min, respectively. The oxygen vacancies formed in SnO₂ after Zn doping could capture the photogenerated electrons of g-C₃N₄, thereby promoting the separation of photogenerated electron-hole pairs, then more ·O₂^- and holes can be generated during the visible light-driven photocatalytic reaction, so that the composite of Zn-doped SnO₂/g-C₃N₄ acquired higher photocatalytic activity and accelerated the degradation of target organics. Active species capturing experiments and ESR detection results also confirmed that ·O₂^- and holes were the main active species in the reaction process. This work developed a novel g-C₃N₄-based photocatalyst with no noble metal, low price, and high photocatalytic activity, which could provide a cost-effective and high-efficiency strategy for wastewater treatment.

Effect of annealing environment on the photoelectrochemical water oxidation and electrochemical supercapacitor performance of SnO2 quantum dots

SnO₂ quantum dots (SQD) were prepared by utilizing the soft-chemical approach. The formed SQD's were annealed in two kinds of environments: air and nitrogen (N₂). Each annealing environment resulted in significant improvement in the performance of water oxidation and electrochemical supercapacitor performance. The specific capacitance of the SQD's under the N₂ annealing process (SQD-N₂) shows significantly better electrochemical performance. A specific capacitance of 79.13 F/g was achieved for SQD-N₂ sample by applying a current of 1 mA, which was approximately 1.5 times greater than that of the pristine SQD's. A cycle stability of 99.4% over 5000 cycles was achieved by SQD-N₂. The process of nitrogen annealing environment brings down the bandgap from 3.37 to 1.9 eV. The SQD-N₂ sample shows the highest photocurrent over SQD and SQD-Air samples. From the LSV study, SQD-N₂ shows the photocurrent density of 4.82 mA/cm², which is 1.43 times greater than pristine SQD sample. The nitrogen-annealing environment provides the optimal environment to tune the average crystallite size and crystallinity nature of SQD's to improve the optical properties like bandgap to enhance the water oxidation and also electrochemical performance.

One-step preparation and characterization of a nanostructured hybrid electrode material via a microwave energy-based approach

Nanostructured hybrid electrode materials are prepared in one-step via a MW energy-based approach with promising electrochemical energy storage application performance.