Two-shell structured PMAA@CeO2 nanocontainers loaded with 2-mercaptobenzothiazole for corrosion protection of damaged epoxy coated AA 2024-T3

Fabrication of dual anti-corrosive polyaniline microcapsules via Pickering emulsion for active corrosion protection of steel

A novel kind of inhibitor-loaded polyaniline (PANI) microcapsule was prepared by Pickering emulsion photopolymerization using polyaniline particles as the Pickering emulsifier. In our strategy, water-dispersible polyaniline nanoparticles were firstly synthesized using a micelle template method and used to stabilize oil-in-water emulsions, in which the oil phase contained photo-crosslinkable and pH sensitive monomers and a photo-initiator. Under UV light, the pH-responsive monomers underwent photo-polymerization and crosslinking and converted to microcapsule shells. During this process, polyaniline nanoparticles were trapped in the microcapsule shells, leading to the formation of PANI microcapsules. The structure and morphology of the synthesized PANI microcapsules were analyzed using FTIR spectroscopy, SEM, and EDX mapping. The inhibitor (mercaptobenzothiazole, MBT) was subsequently incorporated into the PANI microcapsule as a functional core and demonstrated pH-sensitive releasing behavior. With the anti-corrosive PANI as the microcapsule wall and the inhibitor MBT as the core, the as-prepared MBT loaded PANI (MBT@PANI) microcapsule could afford dual corrosion protection, allowing smart protection of metals when exposed to corrosive conditions. The MBT@PANI microcapsules were embedded in UV-cured coating for protecting steel. The corrosion protection performance of the coating with MBT@PANI microcapsules was evaluated using the electrochemical impedance spectroscopy technique and salt spray test, which demonstrated the synergistic inhibition effect of the PANI wall and the loaded MBT in improving anti-corrosion performance of the coating.

Nanocontainers Against Biofouling and Corrosion Degradation of Materials: A Short Review With Prospects

The current state of the art in active corrosion prevention is based on the use of macromolecular containers that can store and release corrosion inhibitors particularly to the surface when corrosion develops. These corrosion inhibitor-containing nano- or microcontainers are subsequently infused into coatings, allowing them to self-heal. Especially, nanocontainers for self-healing coatings with controlled corrosion inhibitors, energy storage, cement fracture repair, and antifouling metal protection have recently been developed. Incorporating these nanocontainers into materials in small amounts (e.g., 5–10 wt% in paints) provided anticorrosion protection that was incomparably better than the current approaches. Furthermore, the materials developed had multifunctional properties, including self-healing, antibacterial, and antimicrobial properties. The primary goal of this review was to compile the different research studies that have been published in a variety of publications so that the reader may better understand the potential of these new types of nanotechnology and the prospects for nanocontainers.

Evaluation of Tannins as Potential Green Corrosion Inhibitors of Aluminium Alloy Used in Aeronautical Industry

In this work some organic natural products were studied, namely tannic acid, gallic acid, mimosa tannin and chestnut tannin, as potential green corrosion inhibitors of the aluminium alloy AA2024-T3. The anodizing treatment was performed in a solution of the referred organic compounds in diluted sulfuric acid. The electrochemical impedance spectroscopy and the potentiodynamic polarization were performed to assess sealing quality and corrosion protection granted by the anodic films. To understand the green inhibitors; interaction with the metal surface, FTIR spectra of anodizing and anodizing and sealed samples of AA2023-T3 were recorded, and the shifts in the position of the major bands confirmed that the green inhibitor interacts with the metal surface. Images of the morphology of the coatings were provided by Scanning Electron Microscopy. From the results obtained through the various techniques that were used to carry out this study it is possible to conclude that the formed anodic films can be a good contribution for the prevention of corrosion in the aluminium alloy AA2024-T3.