Chiroptical Strain Sensors from Electrospun Cadmium Sulfide Quantum-Dot Fibers

Controllable synthesis of homochiral nano/micromaterials has been a constant challenge for fabricating various stimuli-responsive chiral sensors. To provide an avenue to this goal, we report electrospinning as a simple and economical strategy to form continuous homochiral microfibers with strain-sensitive chiroptical properties. First, electrospun homochiral microfibers from self-assembled cadmium sulfide (CdS) quantum dot magic-sized clusters (MSCs) are produced. Highly sensitive and reversible strain sensors are then fabricated by embedding these chiroptically active fibers into elastomeric films. The chiroptical response on stretching is indicated quantitatively as reversible changes in magnitude, spectral position (wavelength), and sign in circular dichroism (CD) and linear dichroism (LD) signals and qualitatively as a prominent change in the birefringence features under cross-polarizers. The observed periodic twisted helical fibrils at the surface of fibers provide insights into the origin of the fibers' chirality. The measurable shifts in CD and LD are caused by elastic deformations of these helical fibrillar structures of the fiber. To elucidate the origin of these chiroptical properties, we used field emission-electron microscopy (FE-SEM), atomic force microscopy (AFM), synchrotron X-ray analysis, polarized optical microscopy, as well as measurements to isolate the true CD, and contributions from photoelastic modulators (PEM) and LD. Our findings thus offer a promising strategy to fabricate chiroptical strain-sensing devices with multiple measurables/observables using electric-field-assisted spinning of homochiral nano/microfibers.

Chiral H-aggregation-induced large stokes shift with CPL generation assisted by α-helical poly(L-lysine) substructure

Fluorescent materials with large Stokes shifts have significant potential for use in optical applications. Typically, a synthetic design strategy is utilized for this purpose. In this study, we demonstrated a novel method by binding a chiral template to a nonchiral fluorescent agent without chemical modification. Specifically, α-helical poly(L-lysine) was employed as the chiral template, which interacted with a disulfonic fluorescent dye, such as NK2751. The dye caused excimer luminescence by inducing the formation of a chirally H-aggregated dimer only when poly(L-lysine) was in an α-helical shape. The result was a Stokes shift of 230 nm. Similar effects were not observed when the chiral template was in a random coil condition and the Stokes shift was less than 40 nm. These findings imply that H-aggregated dimerization, which often results in quenching, permits the electronic transitions necessary for fluorescence events by the formation of the chirally twisted state. In addition, we introduce for the first time the generation of circularly polarized luminescence using the chirality induction phenomena in a dye supported by poly(L-lysine).

Self-Assembly of Chiro-Optical Materials from Nonchiral Oligothiophene-Porphyrin Derivatives and Random Coil Synthetic Peptides

Biomimetic chiral optoelectronic materials can be utilized in electronic devices, biosensors and artificial enzymes. Herein, this work reports the chiro-optical properties and architectural arrangement of optoelectronic materials generated from self-assembly of initially nonchiral oligothiophene-porphyrin derivatives and random coil synthetic peptides. The photo-physical- and structural properties of the materials were assessed by absorption-, fluorescence- and circular dichroism spectroscopy, as well as dynamic light scattering, scanning electron microscopy and theoretical calculations. The materials display a three-dimensional ordered helical structure and optical activity that are observed due to an induced chirality of the optoelectronic element upon interaction with the peptide. Both these properties are influenced by the chemical composition of the oligothiophene-porphyrin derivative, as well as the peptide sequence. We foresee that our findings will aid in developing self-assembled optoelectronic materials with dynamic architectonical accuracies, as well as offer the possibility to generate the next generation of materials for a variety of bioelectronic applications.

Effect of the Hemin Molecular Complexes on the Structure and Properties of the Composite Electrospun Materials Based on Poly(3-hydroxybutyrate)

The creation of innovative fibrous materials based on biodegradable semicrystalline polymers and modifying additives is an urgent scientific problem. In particular, the development of biomedical materials based on molecular complexes and biopolymers with controlled properties is of great interest. The paper suggests an approach to modifying the structure and properties of the composite materials based on poly(3-hydroxybutyrate) (PHB) obtained by the electrospinning method using molecular complexes of hemin. The introduction of 1-5 wt. % of hemin has a significant effect on the supramolecular structure, morphology and properties of PHB-based fibers. Changes in the supramolecular structure intensified with the increasing hemin concentration. On the one hand, a decrease in the fraction of the crystalline phase by 8-10% was observed. At the same time, there is a decrease in the density of the amorphous phase by 15-70%. Moreover, the addition of hemin leads to an improvement in the strength characteristics of the material: the elongation at break increased by 1.5 times, and in the tensile strength, it increased by 3 times. The antimicrobial activity of the hemin-containing composite materials against Escherichia coli and Staphylococcus aureus was confirmed. The obtained materials are proposed to be used in the creation of composite systems for regenerative medicine.

White-light-emitting triphasic fibers as a phosphor for light-emitting diodes

White-light-emitting materials have received significant attention because of their potential application in lighting, displays, and sensors. However, it is a challenge to obtain white light from one phosphor, because the basic requirement of the white light emission spectrum is that it should be wide enough to cover the entire visible light region. In this study, we have designed and demonstrated a white-light-emitting PMMA-CBS-127/PVP-coumarin 6/PAN-rhodamine B (PSCR) fibrous membrane, which was prepared through a triphasic electrospinning method. Three luminescent organic dyes, CBS-127 (4.77 wt%, blue), coumarin 6 (0.1 wt%, green), and rhodamine B (0.42 wt%, red), were elaborately selected and doped into PMMA, PVP, and PAN, respectively. The resulting flexible PSCR membranes show white light emission (cover the entire visible-light region from 382 to 700 nm) with Commission Internationale de L'Eclairage (CIE) coordinates of (0.31, 0.32), which is very close to ideal white light with CIE coordinates (0.33, 0.33). In addition, the PSCR membranes maintained high-quality white light emission after about 10 weeks of storage. The PSCR membranes can be used as the phosphor converting layer in white light-emitting diodes (WLEDs) through a remote membrane packaging method. A bright white emission is achieved at an applied voltage of 9 V. Therefore, the results indicate that PSCR membranes are potentially attractive candidates for application in WLEDs and displays.

Chiroptical Properties in Thin Films of π-Conjugated Systems

Chiral π-conjugated molecules provide new materials with outstanding features for current and perspective applications, especially in the field of optoelectronic devices. In thin films, processes such as charge conduction, light absorption, and emission are governed not only by the structure of the individual molecules but also by their supramolecular structures and intermolecular interactions to a large extent. Electronic circular dichroism, ECD, and its emission counterpart, circularly polarized luminescence, CPL, provide tools for studying aggregated states and the key properties to be sought for designing innovative devices. In this review, we shall present a comprehensive coverage of chiroptical properties measured on thin films of organic π-conjugated molecules. In the first part, we shall discuss some general concepts of ECD, CPL, and other chiroptical spectroscopies, with a focus on their applications to thin film samples. In the following, we will overview the existing literature on chiral π-conjugated systems whose thin films have been characterized by ECD and/or CPL, as well other chiroptical spectroscopies. Special emphasis will be put on systems with large dissymmetry factors (g_abs and g_lum) and on the application of ECD and CPL to derive structural information on aggregated states.