Per-Arylation of Pillar[n]arenes: An Effective Tool to Modify the Properties of Macrocycles

Installation of various substituents is a reliable and versatile way to alter the properties of macrocyclic molecules, but high-yield and controlled methods are not always available especially for multifold reactions. Herein, we report 10- and 12-fold introduction of aryl substituents onto both rims of cylinder-shaped pillar[n]arenes, which usually have alkoxy substituents slanting to the cylinder axes. Although alkoxy pillar[5]arenes exist as D₅-symmetric enantiomeric pairs, arylated pillar[5]arenes provide crushed single-crystal structures and stereoisomerism including C₂-symmetric conformations depending on the aryl groups. Pillar[n]arenes with 2-benzofuranyl groups display bright fluorescence with quantum yields of 88-90% and no host-guest complexation with electron-deficient molecules in solution due to large deviation from alkoxy compounds. A benzofuran-appended pillar[6]arene instead captures small gaseous molecules in the solid state, probably owing to outside spaces surrounded by aromatic rings.

Copillar[5]arene Chemistry: Synthesis and Applications

Research on pillar[n]arenes has witnessed a very quick expansion. This emerging class of functionalized macrocyclic oligoarenes not only offers host–guest properties due to the presence of the central cavity, but also presents a wide variety of covalent functionalization possibilities. This short review focuses on copillararenes, a subfamily of pillar[n]arenes. In copillararenes, at least one of the hydroquinone units bears different functional groups compared to the others. After having defined the particular features of copillararenes, this short review compares the different synthetic strategies allowing their construction. Some key applications and future perspectives are also described.

1 Introduction

2 General Features of Pillar[5]arenes

3 Synthesis of Functionalized Copillar[4+1]arenes

4 Concluding Remarks

On the Stability and Formation of Pillar[n]arenes: a DFT Study

The increased use of both pillar[5]arenes and pillar[6]arenes, stimulated by increasingly efficient syntheses of both, has brought forward the question as to what drives the intermediates in this Friedel-Crafts ring formation to form a pillar[5]arene, a pillar[6]arene, or any other sized macrocycle. This study sets out to answer this question by studying both the thermodynamics and kinetics involved in the absence and presence of templating solvents using high-end wB97XD/6-311G(2p,2d) DFT calculations.

Concentration-dependent supramolecular self-assembly of A1/A2-asymmetric-difunctionalized pillar[5]arene

A series of A1/A2-bromoalkoxy-and-hydroxy-difunctionalized pillar[5]arenes were synthesized by the removal of the pillar[5]arene-bearing benzyl group using catalytic hydrogenation. The difunctionalized pillar[5]arene bearing 8-bromooctoxy and benzyloxy substituents at the A1/A2 positions formed pseudo[1]rotaxane at low concentration and double-threaded supramolecular dimer at high concentration. The supramolecular self-assembly behavior has been probed with multiple methods including varying (variable) concentration 1H NMR spectroscopy, diffusion-ordered spectroscopy (DOSY), dynamic light scattering (DLS) measurements, isothermal titration calorimetry (ITC), and single-crystal X-ray analysis.

Tiara[5]arenes: Synthesis, Solid-State Conformational Studies, Host-Guest Properties, and Application as Nonporous Adaptive Crystals

Tiara[5]arenes (T[5]s), a new class of five‐fold symmetric oligophenolic macrocycles that are not accessible from the addition of formaldehyde to phenol, were synthesized for the first time. These pillar[5]arene‐derived structures display both unique conformational freedom, differing from that of pillararenes, with a rich blend of solid‐state conformations and excellent host–guest interactions in solution. Finally we show how this novel macrocyclic scaffold can be functionalized in a variety of ways and used as functional crystalline materials to distinguish uniquely between benzene and cyclohexane.

Pillar[5]arene-based self-assembled linear supramolecular polymer driven by guest halogen–halogen interactions in solid and solution states

A pillar[5]arene-based linear supramolecular polymer mediated by guest halogen–halogen interactions (C–Br⋯Br–C) was studied in both the solution and solid states.

Stimuli-responsive supramolecular polymer network based on bi-pillar[5]arene for efficient adsorption of multiple organic dye contaminants

A novel supramolecular polymer network gel has been successfully prepared via bi-pillar[5]arene and a tripodal guest, exhibiting multi-stimuli-responsiveness and efficient adsorption of organic dyes.

An azine-containing bispillar[5]arene-based multi-stimuli responsive supramolecular pseudopolyrotaxane gel for effective adsorption of rhodamine B

An azine-containing bispillar[5]arene was designed and synthesized by the reaction of aldehyde functionalized-pillar[5]arene and hydrazine. Then, a novel bispillar[5]arene-based supramolecular pseudopolyrotaxane has been successfully prepared via host-guest interaction. Interestingly, by taking advantage of the host-guest interactions, π-π stacking interactions and hydrogen bonding interactions, the multi-stimuli-responsive gel-sol phase transitions of such a supramolecular pseudopolyrotaxane gel were successfully realized under different stimuli, such as acid, temperature, concentration, and competitive guests. Moreover, this supramolecular system could effectively adsorb dye molecule rhodamine B. It is worth noting that this supramolecular pseudopolyrotaxane gel prepared in cyclohexanol solution (BP5·G·C) could be used as an adsorbent material for adsorbing rhodamine B with adsorption efficiency of 98.4%. Meanwhile, the adsorption efficiency was 97.6% for supramolecular pseudopolyrotaxane gel prepared in DMSO-H2O (v : v, 8 : 2) binary solution (BP5·G·D), also indicating the superior adsorption effect of BP5·G·D toward the dye molecule rhodamine B.

Discovery of non-classical complex models between a cationic water-soluble pillar[6]arene and naphthalenesulfonate derivatives and their self-assembling behaviors

Molecular recognition based on cationic water-soluble pillar[n]arenes shows considerable advantages in their application in biological and environmental systems, such as excellent anion-binding ability and antimicrobial properties. Unique complex models are discovered in this work where a cationic water-soluble pillar[6]arene binds with disodium 1,5-naphthalenedisulfonate and disodium 2,6-naphthalenedisulfonate at the ratio of 1 : 2, which is proven by results from nuclear magnetic resonance spectroscopy, isothermal titration calorimetry, fluorescence spectroscopy experiments and transmission electron microscopy.

Constitutional isomers of brominated-functionalized copillar[5]arenes: synthesis, characterization, and crystal structures

We herein report the preparation of constitutional isomers of brominated-functionalized pillar[5]arenes via co-condensation of 1,4-bis(2-bromoethoxy)benzene and 1,4-dimethoxybenzene. The structures of the obtained isomers were then established using single crystal X-ray diffraction. We also found that the isomeric yield distribution of the different constitutional isomers was independent of the monomer's mole feed ratio, as revealed by HPLC analysis of the crude mixture. Finally, further characterization of the separated constitutional isomers indicated that they possess different melting points, NMR spectra, crystal structures, binding constants and stacking patterns in the solid state.

Constitutional isomers of brominated-functionalized pillar[5]arenes were synthesized using a co-cyclization strategy.

Functionalization at Will of Rim-Differentiated Pillar[5]arenes

The development of an efficient synthetic route toward rim-differentiated C₅-symmetric pillar[5]arenes (P[5]s), whose two rims are decorated with different chemical functionalities, opens up successive transformations of this macrocyclic scaffold. This paper describes a gram-scale synthesis of a C₅-symmetric penta-hydroxy P[5] precursor, and a range of highly efficient reactions that allow functionalizing either rim at will via, e.g., sulfur(VI) fluoride exchange (SuFEx) reactions, esterifications, or Suzuki–Miyaura coupling. Afterward, BBr₃ demethylation activates another rim for similar functionalizations.

Synthesis, functionalization, and isolation of planar-chiral pillar[5]arenes with bulky substituents using a chiral derivatization agent

Bulky perneopentyloxy-pillar[5]arene (Pillar-1) was synthesized and its conformational mobility was investigated using variable-temperature ¹H NMR spectroscopy. The host–guest interactions between Pillar-1 and n-octyltrimethylammonium hexafluorophosphate (OMA) were investigated, and the formation of a 1 : 1 complex was revealed via¹H NMR. Planar-chiral isomers were synthesized via the reaction of a hydroxy-functionalized pillar[5]arene with chiral derivatization agent (S)-(+)-MTPA-Cl. The (Sp, R)-and (Rp, R)-forms of the pillar[5]arene diastereomers were isolated by HPLC, and their structures were analyzed by ¹⁹F NMR. HPLC measurements indicated that racemization did not take place at 40 °C for 72 h.

Bulky perneopentyloxy-pillar[5]arene was synthesized. Complexation behavior and conformational mobility were investigated using ¹H NMR spectroscopy. Isolation of planar-chiral pillar[5]arenes using a chiral derivatization agent were carried out.

Unidirectional complexation of pillar[4]arene[1]benzoquinoneoxime with alkyl alcohols

Unidirectional binding between a pillar[4]arene[1]benzoquinoneoxime host and n-alkyl alcoholic guests was realized with the hydroxy heads of the guests in direct contact with the oxime group of the macrocyclic host.

Chiral discrimination of 2-heptlyaminium salt by planar-chiral monohydroxy-functionalized pillar[5]arenes

A chiral receptor was synthesized based on monohydroxy-functionalized pillar[5]arenes and its ability to discriminate alkyl aminium salts is demonstrated.

An alternative route for the synthesis of hydroxylated pillar[5]arene-based amphiphiles

Conformational mobilities of the units and host-guest complexation with n-octyltrimethylammonium hexafluorophosphate of the synthesized perbenzylated pillar[5]arenes were studied. The formed complex was confirmed by proton nuclear magnetic resonance spectroscopy and mass spectral analysis. Hydroxylated pillar[5]arene-based amphiphiles were synthesized by a co-cyclization strategy followed by catalytic hydrogenation. This approach unlocks the synthesis and the design of a wide range of structural manipulations to these amphiphilic pillararenes.

Encapsulated di-chloro-ethane-mediated inter-locked supra-molecular polymeric assembly of A1/A2-dihydroxy-oct-yloxy pillar[5]arene 1,2-di-chloro-ethane monosolvate

Crystals of 1-(1,4-dihy-droxy)-2,3,4,5-(1,4-dioct-yloxy)-pillar[5]arene, C99H158O10·C2H4Cl2, were grown from a 1,2-dicholoro-ethane/n-hexane solvent system. In the crystal, the encapsulated 1,2-di-chloro-ethane solvent is stabilized by C-H⋯π inter-actions and mediates the formation of an inter-locked supra-molecular polymer via C-H⋯Cl inter-actions.

Single-crystal X-ray diffraction study of a host-guest system comprising monofunctionalized-hydroxy pillar[5]arene and 1-octa-namine

Co-crystallization of a monofunctionalized hy-droxy pillar[5]arene with 1-octa-namine resulted in the formation of an inclusion complex where the alkyl chain is threaded in the macrocycle cavity, namely 1,2,3,4-(1,4-dimeth-oxy)-5-(1-hy-droxy-4-meth-oxy)-pillar[5]arene-1-octa-namine-water (1/1/1), C44H48O10·C8H19N·H2O. The guest compound is stabilized inside the cavity by hydrogen-bonding and C-H⋯π inter-actions. The water mol-ecule in the asymmetric unit mediates the formation of a supra-molecular dimer by hydrogen-bonding inter-actions. These functionalized-pillararene hosts expand the possibility of exploring more supra-molecular inter-actions with various guest species.