Optical and Physical Properties of Silicone Oil Extracted from the Vitreous of Patients Who Underwent Vitrectomy for Retinal Detachment

Purpose: Silicone oil (SO) is a crucial tool in vitreoretinal surgery. SO has the tendency to emulsify depending on certain factors. In this work, detailed analyses have been conducted to understand changes that occurred to the physical, optical, and chemical characteristics of the oil after removal from the vitreous cavity. Methods: Five samples of SO were collected from patients who underwent vitrectomy for rhegmatogenous retinal detachment. The fourier-transform infrared (FTIR) spectroscopy, ultraviolet-visible spectrometer, and contact angle analysis were utilized to determine the changes in its chemical bondings, transmittance, absorbance, viscosity, buoyance, and specific gravity. Results: FTIR analysis showed significant changes in the chemical bonding that might be related to the age of the patient, lens status, the presence of retinal hemorrhages, and the exposure to laser after implantation of SO. In addition, contact angle analysis revealed that the viscosity might be affected by duration of implantation and the age of the patient. Moreover, transmittance and absorbance were largely affected by the exposure to laser retinopexy after implantation. Conclusion: This study showed that certain factors such as the age of the patient, the exposure to laser, lens status, and the presence of retinal hemorrhages may contribute to the emulsification process.

Progress in Studies of Surface Nanotextures and Coatings with Nanomaterials on Glass for Anti-Dust Functionality

Dust pollution presents a wide range of adverse effects to product functionalities and the quality of human life. For instance, when dust particles deposit on solar photovoltaic panels, sunlight absorption is significantly reduced, and solar-to-electrical energy conversion yield may be lowered by 51%- Conventional (manual) dust removal methods are costly, consume significant material resources, and cause irreparable damage to the solar glass surface. Therefore, it is critical to develop glass surfaces that can clean themselves or are easily cleaned by natural forces. Many approaches have been attempted to reduce dust deposition, such as developing superhydrophobic surfaces and preparing anti-static surfaces. This paper reviews the recent progress in studies of anti-dust and cleaning mechanisms or methodologies, which include investigation into micro- and nano-sized dust properties, dust deposition processes and adhesion mechanisms to surfaces, and the state-of-the-art approaches to anti-dust and easy-cleaning functions that tailor surface micro-/nanotextures, lowering surface energy via nanocoatings, and enhancing anti-static properties with nanomaterials. We compare the advantages and disadvantages of various approaches and discuss the research prospects. We envision that future research will be focused on developing transparent surfaces with multiple dust-proof functions to cope with dust-burdening operating environments.

Carbonated Water Droplet Can Ease Dust Mitigation from Hydrophobic Surfaces

Carbonated water droplets can ease the difficulties faced by distilled water droplets mitigating dust particles from hydrophobic surfaces. Rising of CO₂ bubbles in carbonated water droplets and their interaction with the flow structure, created by Marangoni and buoyancy possessions, in droplets are investigated. Spreading and infusion (cloaking) of carbonated water on dust surfaces are analyzed, and the rate at which bubbles formed inside the carbonated water droplet, as placed on a dusty hydrophobic surface, is examined. Flow structures formed inside the carbonated water droplet are simulated, and findings are compared to those corresponding to the distilled water droplet. Dust mitigation from the hydrophobic surface toward droplet liquid inside is evaluated using the high-speed recording system, and the results are compared with those of predictions. It is found that carbonated water spreads and infuses onto dust particles at a higher rate than that at which distilled water does. The rising bubble generates wake-like flow in the fluid while modifying the flow structure inside the droplet; hence, the number of circulating structures increases from two to four in droplet fluid. The dust particles picked up by flow currents are redistributed over the entire carbonated water droplet, while mitigated dust particles remain in the lower region of the distilled water droplet. Bubbles formed inside the carbonated water droplet improve dust lifting and rate of dust mitigation from the surface.

Bactericidal Lubricating Synthetic Materials for Three-Dimensional Additive Assembly with Controlled Mechanical Properties

3D printable synthetic materials have been developed to realize desired surface and mechanical properties. Lubricating synthetic surfaces have broad technological impacts on many applications including food packaging, microfluidic systems, and biomedical devices. However, combining soft materials with lubricants leads to significant phase separation and swelling phenomena, together with lowered mechanical strength, impeding full utilization of lubricating synthetic surfaces with desired shapes in a highly controllable manner. Here, we report a new platform to create a 3D printable lubricant-polymer composite (3D-LUBRIC) for the seamless fabrication of multidimensional structures with diverse functionalities. The rationally designed lubricant-polymer mixtures including silica aerogel particles not only exhibit suitable rheological properties for direct ink writing without phase separation but also enable the deterministic additive assembly of heterogeneous materials, which have large mismatches of oil permeability, with no distinct shape distortion. While exhibiting excellent lubricating properties for a variety of liquids, 3D-LUBRIC shows tunable mechanical properties with desired functionalities, such as optical transparency, flexibility and stretchability, and anti-icing and antibacterial/bactericidal properties. We employ the proposed platform to fabricate self-cleanable containers and antibacterial/bactericidal medical tubes. Our platform can offer new opportunities for building low-adhesive, multifunctional synthetic materials with customized shapes for diverse applications.

Environmental Dust Particles Repelling from A Hydrophobic Surface under Electrostatic Influence

Environmental dust particles repelling from a hydrophobic surface under the electrostatic influence are considered and the dynamics of the dust particles are analyzed incorporating the high speed camera. The velocity of the repelled dust particles are formulated using the force balance incorporating the forces associated with the electrostatic repulsion, particle adhesion, particle drag, and the inflight particles interaction under the charge influence. The functionalized silica particles are deposited on the glass surface towards achieving a hydrophobic wetting state on the surface. An electronic circuitry is designed and built while generating the electrostatic effect, in the pulse form, on the dust particles located on the surface of the hydrophobic plate. Findings revealed that functionalized silica particles deposited surface results in hydrophobic wetting state with contact angle in the order of 158° ± 2° and contact angle hysteresis of 2° ± 1°. The electrostatic impulsive force generated on the plate surface enables to repel most of the sizes of the dust particles; however, some of the small dust particles remain as the residues on the surface after the electrostatic influence. The dust particle velocity predicted from the analytical formulation agrees with that obtained from the high speed camera data. The pinning force of the small size particles (0.6 µm≤), due to adhesion on the surface, is found to be larger than the average size particles (∼1.2 µm), which in turn, suppresses these particles repelling from the surface under the electrostatic influence. The residues of the dust particles on the as received glass surface after dust repelling are more than those residues on the hydrophobic surface. This behavior is associated with the dust particles adhesion on the surface. Consequently, hydrophobic wetting state on the plate surface improves the dust particle repelling from the surface.

Self-cleaning of a hydrophobic surface by a rolling water droplet

A water droplet behavior on a hydrophobic surface is examined relevant to the dust particles removal from the surface. Surface crystallization of polycarbonate is realized in acetone bath and the resulting surface is coated by the functionalized nano-size silica particles towards reducing contact angle hysteresis. This arrangement provides droplet rolling/sliding on the hydrophobic surface. Droplet translational velocity is formulated and predictions are compared with those resulted from the high speed recorded data. Influence of surface inclination angle on droplet dynamics is investigated and the dust removal mechanism on the inclined surface is analyzed. It is found that predictions of droplet translational velocity agree well with those obtained from the experiment. Droplet rolling dominates over sliding on the inclined surface and droplet sliding velocity remains almost 10% of the droplet translational velocity. The main mechanism for the dust particles removal is associated with the droplet fluid cloaking of the dust particles during its transition on the hydrophobic surface. Droplet acceleration, due to increased surface inclination angle, has effect on the rate of dust particles removal from the surface, which is more apparent for large droplet volumes. Increasing droplet acceleration improves the coverage area of the clean surface.

Water droplet on inclined dusty hydrophobic surface: influence of droplet volume on environmental dust particles removal

A water droplet's behavior on an inclined hydrophobic surface in the presence of environmental dust particles is considered and the droplet's dynamics are analyzed pertinent to self-cleaning applications. A polycarbonate wafer is crystallized using the solution-crystallization method to generate hierarchically distributed micro/nano-sized spherules and pillars on the surface. To improve the wetting state and lower the contact angle hysteresis, functionalized silica particles are synthesized and, later, deposited on the crystallized surface. Environmental dust particles are collected and characterized in terms of elemental composition, size and shape. A high-speed camera is used to monitor a water droplet's behavior on the inclined hydrophobic surface with and without the presence of dust particles. The influence of droplet volume on the dust particle removal rate from the inclined hydrophobic surface is assessed. It is found that the functionalized silica particles deposited on the surface result in a droplet contact angle in the order of 158 ± 2° and contact angle hysteresis of 2 ± 1°. The water droplet mainly rolls on the inclined hydrophobic surface and the sliding velocity remains almost 13% of the transverse velocity of the droplet. Droplet wobbling is influenced by the dust particles and the droplet size; in which case, increasing the droplet volume enhances the droplet puddle thickness on the hydrophobic surface. The cloaking of the droplet fluid onto the dust particles causes mixing of the dust particles with the droplet fluid while enhancing the particle removal from the hydrophobic surface. Increasing the droplet volume slightly enhances the size of the area of the cleaned surface.

Reversible exchange of wetting state of a hydrophobic surface via phase change material coating

Reversible exchange of the wetting state of a hydrophobic surface is examined. Solution crystallization of a polycarbonate surface is carried out to form hierarchically distributed micro/nano size spherules and fibrils on the surface. Although the solution crystallized surface has hydrophobic characteristics, the contact angle hysteresis remains high. Functionalized silica particles are deposited on the crystallized polycarbonate surface to improve the droplet contact angle and lower contact angle hysteresis. The liquid film of n-octadecane with 1.5 μm thickness is formed on the functionalized silica particles deposited crystallized surface, which results in hydrophilic surface characteristics. The n-octadecane film solidifies upon reducing the temperature on the surface and solid flakes of n-octadecane are formed. This arrangement changes the surface wetting state to hydrophobic. Liquefaction and solidifying of the n-octadecane film at the functionalized silica deposited surface gives rise to reversible exchange of surface wetting state. This behavior is attributed to exposure of emerging functionalized silica particles to the free surface in the region of the solid n-octadecane flakes. The water droplet is cloaked by the liquid n-octadecane while forming a ridge around the droplet. In this case, the water droplet becomes mobile at the surface because flow develops in the n-octadecane liquid film at the onset of liquefaction.