Polyacrylic acid/ polyvinylpyrrolidone hydrogel wound dressing containing zinc oxide nanoparticles promote wound healing in a rat model of excision injury

Developing and designing efficient wound dressings have gained increasing attention and shown beneficial results in improved wound healing effects. This study was conducted to improve wound healing properties and introduce a novel potential wound dressing. A novel hydrogel based on polyvinylpyrrolidone/poly acrylic acid containing Zinc oxide nanoparticles was prepared as an antibacterial wound dressing and examined in a rat excisional wound model. This hydrogel prepared by free radical polymerization using potassium persulfate (KPS) as an initiator, N, N-methylene bisacrylamide (MBA) as a cross-linker, poly acrylic acid (PAA) as a monomer in the presence of polyvinylpyrrolidone (PVP) and Zinc oxide nanoparticles (ZnO NPs). Analyses such as Scanning Electron Microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), and Thermal gravimetric analysis (TGA) were used to study morphology structure. After choosing the optimal sample, in vivo characterization of excisional wound injury on a rat model was done. The healing rate and histological analysis were calculated and compared among the groups. The therapeutic potential of the PAA-PVP-ZnO-%2 was investigated in a rat model of excisional injury compared to the control group. Results showed that the polyacrylic acid/polyvinylpyrrolidone hydrogel wound dressing containing zinc oxide nanoparticles accelerated wound contraction, had antibacterial effects, and promoted wound healing compared to other groups.

Asymmetric Dichroic Colors in Stretchable Film with Embedded Au/Ag Alloy Nanoparticles

We present a new type of stretchable dichroic film in which Au and Ag alloy nanoparticles (NPs) are dispersed in polydimethylsiloxane (PDMS). The alloy NPs are synthesized with different atomic compositions and sizes to modulate their plasmonic resonance frequencies and absorption and scattering cross sections. The PDMS dichroic film in which 100 nm alloy NPs with a Au/Ag ratio of 7:3 are dispersed shows exotic optical properties under tensile strain. When 40% tensile strain is applied, the film exhibits a strain-sensitive transmission and strain-insensitive reflection behavior in which the transmittance is increased up to 2.6 times, whereas the reflectance remains unchanged. Moreover, we demonstrate a stretchable anticounterfeiting film and a flexible dichroic sculpture fabricated with the PDMS composite. This work demonstrates a new type of plasmonic application that has great potential in various applications, such as special-purpose optical films, security patterns, and smart windows.

The Influence of the Hydrophobic Polymeric Coating on 5-ASA Release from the Bipolymeric Milibeads with Amidated Pectin

The industrial polymeric carriers for peroral mesalazine application exploit, i.a., cellulose or polyacrylic acid derivatives, polyvinylpyrrolidone, and modified starch. Pectins, as natural polymers, are interesting materials in pharmaceutical applications due to properties such as non-toxicity, biocompatibility, and biodegradability. The aim of the study was the evaluation of the release of the drug from coated pectin beads doped with synthetic polymers as drug carriers to the colon, as well as interactions between ingredients. The drug release was carried out using basket apparatus. The amount of 5-ASA (5-aminosalicylic acid, mesalazine) released to the pH = 7.4 buffer with pectinase was measured at selected time intervals using UV-Vis spectroscopy. The zero-, first-, and second-order kinetics, as well as Higuchi, Korsmeyer-Peppas, and Hixon-Crowell equations, were used to analyze the release pattern. The interactions between beads components were investigated employing FTIR spectrophotometry and DSC study. The dissolution of the drug was divided into two parts. It was found that the release of 5-ASA followed mainly the Higuchi equation. The mass transport in the first stage of the release followed a non-Fickian model and the parameter n was in the range of 0.74 ± 0.2-0.99 ± 0.2. The formulation doped with PA (polyacrylic acid) was the most appropriate and capable of overcoming the variable conditions of the gastrointestinal tract.

Multifunctional Pd-Based Nanocomposites with Designed Structure from In Situ Growth of Pd Nanoparticles and Polyether Block Amide Copolymer

Nanocomposites containing palladium nanoparticles were synthesized by in situ generation route from palladium acetate and a polyether block amide matrix with the aim to obtain materials with specific nanoparticle location and function properties. The chosen Pebax matrix was composed of a continuous soft phase containing dispersed semi-crystalline rigid domains. Nanocomposite films with Pd amount up to 30 wt% (corresponding to 3.5 vol%) were directly prepared from the palladium precursor and the copolymer matrix through a solvent cast process. The microstructure of the films was investigated by microcalorimetry, X-ray diffraction analyses and transmission electron microscopy. The nanocomposites' function properties in terms of electrical conductivity and interaction towards hydrogen were studied as a function of the palladium content. It was shown that the spherical crystalline Pd nanoparticles that were in situ formed were located in the continuous soft phase of the copolymer matrix. They did not induce modification of Pebax microstructure and chain mobility. The specific location of the metal nanoparticles within the copolymer matrix associated with their low size allowed obtaining conductive materials for Pd amount equal to 3.5 vol%. Moreover, the affinity towards hydrogen evidenced from hydrogen permeation experiments made this nanocomposite series promising for further development in sensing applications.

Facile fabrication and low-temperature bonding of Cu@Sn–Bi core–shell particles for conductive pastes

Cu@Sn–Bi core–shell particles were synthesized and used as conductive fillers of ink applied to flexible printed circuits. This work provides new insights into the low-temperature bonding and anti-oxidation protection of Cu-based conductive pastes.

Bipolymeric Pectin Millibeads Doped with Functional Polymers as Matrices for the Controlled and Targeted Release of Mesalazine

Targeted drug delivery systems are a very convenient method of treating inflammatory bowel disease. The properties of pectin make this biopolymer a suitable drug carrier. These properties allow pectin to overcome the diverse environment of the digestive tract and deliver the drug to the large intestine. This investigation proposed bipolymeric formulations consisting of the natural polymer pectin and a synthetic polymer containing the drug 5-aminosalicylic acid. Pectin beads were prepared via ionotropic gelation involving the interaction between the hydrophilic gel and calcium ions. The obtained formulations consisted of natural polymer, 5-aminosalicylic acid (5-ASA) and one of the synthetic polymers, such as polyacrylic acid, polyvinylpyrrolidone, polyethylene glycol or aristoflex. The release of the drug was carried out employing a basket apparatus (USP 1). The acceptor fluid was pH = 7.4 buffer with added enzyme pectinase to reflect the colon environment. The amount of the released drug was determined using UV-Vis spectrophotometry at a wavelength of λ = 330 nm. The kinetics of the drug dissolution revealed that none of the employed models was appropriate to describe the release process. A kinetic analysis of the release profile during two release stages was carried out. The fastest drug release occurred during the first stage from a formulation containing pectin and polyethylene glycol. However, according to the applied kinetic models, the dissolution of 5-ASA was rather high in the formulation without the synthetic polymer during the second stage. Depending on the formulation, 68-77% of 5-ASA was released in an 8-hour time period. The FTIR and DSC results showed that there was no interaction between the drug and the polymers, but interactions between pectin and synthetic polymers were found.

Effects of coating materials on antibacterial properties of industrial and sunscreen-derived titanium-dioxide nanoparticles on Escherichia coli

Organic or inorganic stabilizers are often used for coating nanoparticles (NPs) in consumer products. However, upon release of stabilized NPs into the environment, uncertainty exists as to the antimicrobial properties of NPs due to stabilizers and the resultant bioaccumulation in organisms. This study investigates antibacterial effects and subsequent mechanisms of TiO₂ NPs on Escherichia coli (E. coli) in the presence and absence of stabilizers (CMC, PVP, and SiO₂) commonly used in consumer products. Compared with uncoated TiO₂ NPs, the presence of any stabilizers tested in this study increased toxicity of NPs and enhanced growth inhibition in E. coli. While the particle sizes of TiO₂ were smaller as the result of coating with PVP or CMC and appeared to contribute to E. coli cell damage, the generation of reactive oxygen species (ROS) was independent of stabilizer type. In fact, coating with PVP and CMC exerted ROS scavenging properties. In contrast, increased ROS production was observed at higher concentrations of TiO₂ and upon coating with SiO₂. This impact of SiO₂ can be related to the formation of a TiOSi chemical bond. The results of the present study emphasize the importance of nanoparticle coating to their anti-bacterial activity and toxicity.

Size and surface effects on chemically-induced joining of Ag conductive inks

The underlying roles of particle size effects and ionic salts are uncovered for optimal chemically-induced sintering as a scalable approach to join metallic nanomaterials to create efficient sensors.