Decoupling the Effects of Collagen Alignment and Bioceramic Incorporation on Osteoblast Proliferation, Differentiation, and Mineralization

Biomimetic scaffolds provide the essential biophysical (e.g., surface topography, stiffness) and biochemical cues (e.g., composition) to guide cell morphology, proliferation, and differentiation. Although the effects of biomaterial-directed cues on cell response have been widely reported, few studies have sought to decouple these effects to better understand the interplay between the different physicochemical factors on tissue-specific cell function. Herein, beta-tricalcium phosphate (β-TCP) was incorporated into electrochemically aligned collagen (ELAC) and random collagen threads, and the individual and interactive effects of collagen alignment (i.e., biophysical) and bioceramic incorporation (i.e., biochemical) on osteoblast cell morphology, proliferation, differentiation, and mineralization were investigated. Results showed that collagen alignment in ELAC threads was retained upon β-TCP incorporation. Collagen alignment significantly improved (p < 0.05) the swelling capacity and stability of collagen threads, while β-TCP incorporation showed no such effects. Tensile tests revealed that β-TCP incorporation significantly decreased (p < 0.05) the strength and stiffness of ELAC threads. Significant increase (p < 0.05) in Saos-2 cell orientation and alkaline phosphatase (ALP) activity was observed on ELAC compared to random collagen threads indicating that aligned collagen serves as a key driving factor for osteogenesis. β-TCP incorporation into random collagen threads had no effect on Saos-2 cell function. On the other hand, presence of β-TCP significantly augmented (p < 0.05) Saos-2 cell metabolic activity, differentiation, and mineralization on ELAC threads. Together, these findings suggest that combining collagen alignment and β-TCP incorporation can create robust tissue-mimicking scaffolds for bone regeneration applications.

Review on electrically conductive smart nerve guide conduit for peripheral nerve regeneration

At present, peripheral nerve injuries (PNIs) are one of the leading causes of substantial impairment around the globe. Complete recovery of nerve function after an injury is challenging. Currently, autologous nerve grafts are being used as a treatment; however, this has several downsides, for example, donor site morbidity, shortage of donor sites, loss of sensation, inflammation, and neuroma development. The most promising alternative is the development of a nerve guide conduit (NGC) to direct the restoration and renewal of neuronal axons from the proximal to the distal end to facilitate nerve regeneration and maximize sensory and functional recovery. Alternatively, the response of nerve cells to electrical stimulation (ES) has a substantial regenerative effect. The incorporation of electrically conductive biomaterials in the fabrication of smart NGCs facilitates the function of ES throughout the active proliferation state. This article overviews the potency of the various categories of electroactive smart biomaterials, including conductive and piezoelectric nanomaterials, piezoelectric polymers, and organic conductive polymers that researchers have employed latterly to fabricate smart NGCs and their potentiality in future clinical application. It also summarizes a comprehensive analysis of the recent research and advancements in the application of ES in the field of NGC.

Recent advances in electrospun protein fibers/nanofibers for the food and biomedical applications

Electrospinning (ES) is one of the most investigated processes for the convenient, adaptive, and scalable manufacturing of nano/micro/macro-fibers. With this technique, virgin and composite fibers may be made in different designs using a wide range of polymers (both natural and synthetic). Electrospun protein fibers (EPF) shave desirable capabilities such as biocompatibility, low toxicity, degradability, and solvolysis. However, issues with the proteins' processibility have limited their widespread utilization. This paper gives an overview of the features of protein-based biomaterials, which are already being employed and has the potential to be exploited for ES. State-of-the-art examples showcasing the usefulness of EPFs in the food and biomedical industries, including tissue engineering, wound dressings, and drug delivery, provided in the applications. The EPFs' future perspective and the challenge they pose are presented at the end. It is believed that protein and biopolymeric nanofibers will soon be manufactured on an industrial scale owing to the limitations of employing synthetic materials, as well as enormous potential of nanofibers in other fields, such as active food packaging, regenerative medicine, drug delivery, cosmetic, and filtration.

3D Printing in Regenerative Medicine: Technologies and Resources Utilized

Over the past ten years, the use of additive manufacturing techniques, also known as "3D printing", has steadily increased in a variety of scientific fields. There are a number of inherent advantages to these fabrication methods over conventional manufacturing due to the way that they work, which is based on the layer-by-layer material-deposition principle. These benefits include the accurate attribution of complex, pre-designed shapes, as well as the use of a variety of innovative raw materials. Its main advantage is the ability to fabricate custom shapes with an interior lattice network connecting them and a porous surface that traditional manufacturing techniques cannot adequately attribute. Such structures are being used for direct implantation into the human body in the biomedical field in areas such as bio-printing, where this potential is being heavily utilized. The fabricated items must be made of biomaterials with the proper mechanical properties, as well as biomaterials that exhibit characteristics such as biocompatibility, bioresorbability, and biodegradability, in order to meet the strict requirements that such procedures impose. The most significant biomaterials used in these techniques are listed in this work, but their advantages and disadvantages are also discussed in relation to the aforementioned properties that are crucial to their use.

Exploration of biomimetic poly(γ-benzyl-L-glutamate) fibrous scaffolds for corneal nerve regeneration

Poly(γ-benzyl-L-glutamate) (PBG) made biomimetic scaffolds are explored as candidate materials for corneal nerve regeneration and neurotrophic keratopathy treatment. The PBG with built-in neurotransmitter glutamate was synthesized and fabricated into 3D fibrous scaffolds containing aligned fibers using electrospinning. In in vitro experiments, primary mouse trigeminal ganglia (TG) cells were used. Immunohistochemistry (IHC) analysis shows that TG cells cultured on PBG have no cytotoxic response for 21 days. Without any nerve growth factor, TG cells have the longest neurite length of 225.3 μm in the PBG group and 1.3 times the average length as compared with the polycaprolactone and no scaffold groups. Also, aligned fibers guide the neurite growth and extension unidirectionally. In vivo assays were carried out by intracorneal implantation of PBG on clinical New Zealand rabbits. The external eye photos and in vivo confocal microscopy (IVCM) show a low immune response. The corneal neural markers (βIII tubulin and SMI312) in the IHC analysis are consistent with the position stained by glutamate of implanted scaffolds, indicating that PBG induces neurogenesis. PBG exhibits mechanical stiffness to resist material deformation possibly caused by surgical operations. The results of this study demonstrate that PBG is suitable for corneal nerve regeneration and the treatment of neurotrophic keratopathy.

Study on the angiogenesis ability of Polymethyl methacrylate-mineralized collagen/Mg-Ca composite material in vitro and the bone formation effect in vivo

Magnesium (Mg) and its alloys show high degrees of biocompatibility and biodegradability, used as biodegrad able materials in biomedical applications. In this study, Polymethyl methacrylate (PMMA) - mineralized collagen (nano-Hydroxyapatite/collagen; nHAC)/Mg-Ca composite materials were prepared, to study the angiogenesis ability of its composite materials on Human umbilical vein endothelial cells (HUVECs) and its osteogenesis effect in vivo. The results showed that the PMMA-nHAC reinforcement materials can promote the proliferation and adhesion in HUVECs of Mg matrix significantly, it can enhance the migration motility and VEGF expression of HUVECs. In vivo, Micro-CT examination showed that with coated samples presenting the highest bone formation. Histologically, the materials and their corrosion products caused no systematic or local cytotoxicological effects. Therefore, the Mg matrix composites prepared in the present study has good biocompatibility and PMMA-nHAC/Mg-Ca composite may be an ideal orthopedic material to improve the bone formation, and biodegradable magnesium based implants with bioactivity have potential applications in bone tissue.

Fabrication Techniques of Nerve Guidance Conduits for Nerve Regeneration

Neuronal loss and axonal degeneration after spinal cord injury or peripheral injury result in the loss of sensory and motor functions. Nerve regeneration is a complicated and medical challenge that requires suitable guides to bridge nerve injury gaps and restore nerve function. Due to the hostility of the microenvironment in the lesion, multiple conditions should be fulfilled to achieve improved functional recovery. Many nerve conduits have been fabricated using various natural and synthetic polymers. The design and material of the nerve guide conduits were carefully reviewed. A detailed review was conducted on the fabrication method of the nerve guide conduit for nerve regeneration. The typical fabrication methods used to fabricate nerve conduits are dip coating, solvent casting, micropatterning, electrospinning, and additive manufacturing. The advantages and disadvantages of the fabrication methods were reported, and research to overcome these limitations was reviewed. Extensive reviews have focused on the biological functions and in vivo performance of polymeric nerve conduits. In this paper, we emphasize the fabrication method of nerve conduits by polymers and their properties. By learning from the existing candidates, we can advance the strategies for designing novel polymeric systems with better properties for nerve regeneration.

Research progress, models and simulation of electrospinning technology: a review

In recent years, nanomaterials have aroused extensive research interest in the world's material science community. Electrospinning has the advantages of wide range of available raw materials, simple process, small fiber diameter and high porosity. Electrospinning as a nanomaterial preparation technology with obvious advantages has been studied, such as its influencing parameters, physical models and computer simulation. In this review, the influencing parameters, simulation and models of electrospinning technology are summarized. In addition, the progresses in applications of the technology in biomedicine, energy and catalysis are reported. This technology has many applications in many fields, such as electrospun polymers in various aspects of biomedical engineering. The latest achievements in recent years are summarized, and the existing problems and development trends are analyzed and discussed.

Feasibility of Application of the Newly Developed Nano-Biomaterial, β-TCP/PDLLA, in Maxillofacial Reconstructive Surgery: A Pilot Rat Study

This study was performed to examine the applicability of the newly developed nano-biocomposite, β-tricalcium phosphate (β-TCP)/u-HA/poly-d/l-lactide (PDLLA), to bone defects in the oral and maxillofacial area. This novel nano-biocomposite showed several advantages, including biocompatibility, biodegradability, and osteoconductivity. In addition, its optimal plasticity also allowed its utilization in irregular critical bone defect reconstructive surgery. Here, three different nano-biomaterials, i.e., β-TCP/PDLLA, β-TCP, and PDLLA, were implanted into critical bone defects in the right lateral mandible of 10-week-old Sprague–Dawley (SD) rats as bone graft substitutes. Micro-computed tomography (Micro-CT) and immunohistochemical staining for the osteogenesis biomarkers, Runx2, osteocalcin, and the leptin receptor, were performed to investigate and compare bone regeneration between the groups. Although the micro-CT results showed the highest bone mineral density (BMD) and bone volume to total volume (BV/TV) with β-TCP, immunohistochemical analysis indicated better osteogenesis-promoting ability of β-TCP/PDLLA, especially at an early stage of the bone healing process. These results confirmed that the novel nano-biocomposite, β-TCP/PDLLA, which has excellent biocompatibility, bioresorbability and bioactive/osteoconductivity, has the potential to become a next-generation biomaterial for use as a bone graft substitute in maxillofacial reconstructive surgery.

Functional Polymer‐Based Nerve Guide Conduits to Promote Peripheral Nerve Regeneration

Bridging critical‐sized defects in peripheral nerves to achieve functional recovery is a challenge for orthopedic and hand surgeons. Inadequate regeneration of peripheral nerve axons often results in long‐term partial or total sensory and/or motor impairment. Currently, the best treatment available for long‐gap peripheral nerve regeneration is autologous nerve transplantation, while the successful implementation of this approach requires for secondary surgery and donor nerves. The nerve guide conduit (NGC) serves as an alternative to autograft of nerve, as it connects the proximal and distal ends of nerve defects and provides physical and biochemical guidances for axon regeneration. Functionalized NGCs enhance nerve regeneration by providing neuroprotection, antioxidation, vascular regeneration enhancement, and immune regulatory effects. In this review, the authors summarize the latest advances in functional polymer‐based NGCs for peripheral nerve regeneration and present the perspectives on the development of peripheral NGCs for potential clinical applications.

Aligned soy protein isolate-modified poly(L-lactic acid) nanofibrous conduits enhanced peripheral nerve regeneration

OBJECTIVE

Repair and regeneration of peripheral nerve defect by engineered conduits have greatly advanced in the past decades while still facing great challenges.

APPROACH

In this work, we fabricated a new highly oriented poly(L-lactic acid) (PLLA)/soy protein isolate (SPI) nanofibrous conduit (HO-PSNC) for nerve regeneration.

MAIN RESULTS

Firstly, we observed that SPI could efficiently modify PLLA for the electrospinning of PLLA/SPI nanofibers with enhanced physical and biological properties. Incorporation of SPI decreased the fiber diameter and ductility of PLLA/SPI nanofibrous films (PSNFs), improved the tensile strength and surface wettability of PSNFs and increased the in vivo degradability of the PSNFs. When the hybrid ratio of SPI was 20 and 40%, PSNFs could efficiently promote neural cell extension and differentiation in vitro. Based on these data, 20% SPI (PSNF-20) was chosen for further investigation. Next, PSNF-20 with different fiber orientations (random/low orientation, medium, and high orientation, respectively) were developed and used for evaluating neural cell behaviors on the materials. Results revealed that the PSNF-20 with highly oriented nanofibers (HO-PSNF-20) or mediumly oriented nanofibers (MO-PSNF-20) showed a better performance in directing cell extension and enhancing neurite outgrowth. Finally, the highly oriented nanofibers conduits (HO-PSNC-20) were used to bridge sciatic nerve defect in rats with highly oriented PLLA and autografts as controls. HO-PSNC-20 exhibited a significant promotion in nerve regeneration and functional reconstruction comparing to highly oriented PLLA as proven by the evaluations of walking track, electrophysiology, toluidine blue nerve staining, transmission electron microscopy, neural factors staining and qPCR, and gastrocnemius histology.

SIGNIFICANCE

In conclusion, nerve conduit fabricated from aligned electrospinning of SPI-modified PLLA nanofibers is promising for peripheral nerve regeneration.

Regenerative medicine and drug delivery: Progress via electrospun biomaterials

Worldwide research on electrospinning enabled it as a versatile technique for producing nanofibers with specified physio-chemical characteristics suitable for diverse biomedical applications. In the case of tissue engineering and regenerative medicine, the nanofiber scaffolds' characteristics are custom designed based on the cells and tissues specific needs. This fabrication technique is also innovated for the production of nanofibers with special micro-structure and secondary structure characteristics such as porous fibers, hollow structure, and core- sheath structure. This review attempts to critically and succinctly capture the vast number of developments reported in the literature over the past two decades. We then discuss their applications as scaffolds for induction of cells growth and differentiation or as architecture for being used as graft for tissue engineering. The special nanofibers designed for improving regeneration of several tissues including heart, bone, central nerve system, spinal cord, skin and ocular tissue are introduced. We also discuss the potential of the electrospinning in drug delivery applications, which is a critical factor for cell culture, tissue formation and wound healing applications.