Constructing A/B-Side Heterogeneous Asynchronous Structure with Ag2Se Layers and Bushy-like PPy toward High-Performance Flexible Photo-Thermoelectric Generators

The enthusiasm for environmental energy harvesting has triggered a boom in research on photo-thermoelectric generators (PTEGs), and the relevant applications are mainly focused on self-energy supply sensors owing to the limitations of their output performances. For this purpose, high-output hierarchical heterogeneous PTEGs were constructed by assembling separately optimized thermoelectric (TE) and photothermal (PT) layers. The pressure and temperature conditions of Ag2Se films during the pressing process were first explored, and the sample with the optimal performance and least defects was selected as the TE layer. At the same time, different morphologies of polypyrrole (PPy) PT layers were electrochemically synthesized. It is found that the three-dimensional structure of Bushy-PPy could effectively improve the light absorption and thus enhance the PT conversion performance. The final assembled PTEG can produce an output voltage of -9.03 mV and an output power of 3.53 μW under the irradiation of a near-infrared light source of 300 mW cm-2 without a cooling source, and it can also achieve considerable output power under visible light irradiation of different intensities. Combining its high retentions of electrical conductivity (99%) and output performance (97%) after 1000 bending-tension cycles, it is proven to be a promising next-generation wearable flexible energy harvesting device.

Molecular Regulation of Polymeric Raman Probes for Ultrasensitive Microtumor Diagnosis and Noninvasive Microvessle Imaging

Raman imaging is a powerful tool for the diagnosis of cancers and visualization of various biological processes. Polymers possessing excellent biocompatibility are promising probes for Raman imaging. However, few polymers are reported to serve as Raman probes for in vivo imaging, mainly due to the intrinsic weak Raman signal intensity and fluorescence interference of these polymers. Herein, a poly(indacenodithiophene-benzothiadiazole) (IDT-BT) polymer is presented, which emits unprecedentedly strong Raman signals under the near-infrared wavelength (785 nm) excitation, thus functioning as a Raman probe for ultrasensitive in vivo Raman imaging. Further mechanistic studies unveil that the unique Raman feature of the IDT-BT polymer relies on molecularly regulating its absorbance edge adjacent to the desired excitation wavelength, thus avoiding fluorescence interference and simultaneously emitting strong Raman scattering under preresonant excitation. Taking advantage of this discipline, the IDT-BT polymeric probe successfully realizes intraoperative Raman imaging of micrometastasis as small as 0.3 mm × 0.3 mm, comparable to the most sensitive Raman probes currently reported. Impressively, the IDT-BT enables noninvasive microvascular imaging, which is not achieved using other Raman probes. This work opens a new avenue toward the development of polymeric Raman probes for in vivo Raman imaging.

A label-free electrochemiluminescence immunosensor for carbohydrate antigen 153 based on polypyrrole-luminol-AuNPs nanocomposites with bi-catalysis

Polypyrrole-luminol-AuNPs nanocomposites were prepared and used to develop a sensitive label-free electrochemiluminescence (ECL) immunosensor for carbohydrate antigen 153 (CA153) detection. Firstly, polypyrrole (PPY) nanoparticles were synthesized by a chemical oxidation method using FeCl₃ as an oxidizing agent, then luminol and gold nanoparticles (AuNPs) were combined with PPY nanoparticles through electrostatic interaction to form PPY-luminol-AuNPs nanocomposites. The nanocomposites were characterized by transmission electron microscopy (TEM), UV-Vis absorption spectra, atomic emission spectrometry (AES), X-ray diffraction (XRD) and electrochemical impedance spectroscopy (EIS). Especially, iron element was also detected in the nanocomposites. The PPY-luminol-AuNPs nanocomposites showed excellent ECL activity due to the bi-catalysis of iron ion and gold nanoparticles on the ECL of luminol. Furthermore, the nanocomposites showed good film-forming property, and it can be fixed on electrode surface without the assistance of other film-forming materials. On this basis, an ECL immunosensor for CA153 was constructed by covalently immobilizing anti-CA153 on PPY-luminol-AuNPs modified indium-doped tin oxide (ITO) electrode. In the presence of CA153, a remarkable decrease in ECL signals was observed due to the formation of anti-CA153/CA153 complex. The immunosensor showed a good linear relationship in the concentration range of 0.001 to 700 U/mL for CA153, and the detection limit was 5.8 × 10^-4 U/mL (S/N = 3). Furthermore, the ECL immunosensor was applied to the determination of CA153 in practical human serum sample.

Polypyrrole/Helical Carbon Nanotube Composite with Marvelous Photothermoelectric Performance for Longevous and Intelligent Internet of Things Application

Helical carbon nanotube (HCNT) is a vital member of carbon nanomaterials, but little effort was devoted to explore its unique characteristics and applications during the past few decades. Here, we report an organic thermoelectric composite with an excellent photothermoelectric (PTE) effect by conformally wrapping polypyrrole (PPy) on the intricate surface of HCNTs, which have been confirmed to have remarkable near-infrared (NIR) photothermal conversion capability and ultralow heat transportation characteristics. The results indicate that with the increasing HCNT content, PPy shell thickness reduces and exhibits denser as well as partial orientation, while the inter-ring angle slowly decreases and the bipolaron becomes dominant in carrier composition gradually. Consequently, the Seebeck coefficient increases monotonically, whereas the electrical conductivity remains nearly invariant. The final composite combines the benign thermoelectric properties, excellent photothermal response performance, and the lowest thermal conductivity of the carbon-based thermoelectric composite yet reported (0.064 W m^-1 K^-1). A single strip NIR light-stimulated adjustable delay switch was designed and fabricated, with the open-circuit voltage and short-circuit current under a 400 mW cm^-2 NIR-stimulated approach to 720 μV and 62 nA with the discrepancy of consecutive periodic output signals less than 4.2%, exhibiting incredible stability and reliability and demonstrating the highest output voltage of a single strip among the reported organic PTE composite at room temperature. Our work fills in a gap of HCNT research, which hitherto existed in the PTE and thermoelectric field.

Strategies to improve the photothermal capacity of gold-based nanomedicines

The plasmonic photothermal properties of gold nanoparticles have been widely explored in the biomedical field to mediate a photothermal effect in response to the irradiation with an external light source. Particularly, in cancer therapy, the physicochemical properties of gold-based nanomaterials allow them to efficiently accumulate in the tumor tissue and then mediate the light-triggered thermal destruction of cancer cells with high spatial-temporal control. Nevertheless, the gold nanomaterials can be produced with different shapes, sizes, and organizations such as nanospheres, nanorods, nanocages, nanoshells, and nanoclusters. These gold nanostructures will present different plasmonic photothermal properties that can impact cancer thermal ablation. This review analyses the application of gold-based nanomaterials in cancer photothermal therapy, emphasizing the main parameters that affect its light-to-heat conversion efficiency and consequently the photothermal potential. The different shapes/organizations (clusters, shells, rods, stars, cages) of gold nanomaterials and the parameters that can be fine-tuned to improve the photothermal capacity are presented. Moreover, the gold nanostructures combination with other materials (e.g. silica, graphene, and iron oxide) or small molecules (e.g. indocyanine green and IR780) to improve the nanomaterials photothermal capacity is also overviewed.

A smart theranostic agent based on Fe-HPPy@Au/DOX for CT imaging and PTT/chemotherapy/CDT combined anticancer therapy

We herein explored a smart Fe-HPPy@Au/DOX theranostic agent for CT diagnosis and PTT/chemotherapy/CDT synergistic treatment of cancer. When the Fe-HPPy@Au/DOX theranostic agent entered the tumor, the tumor environment accelerated the trapped Fe ions release to catalyze the production of ˙OH for CDT. NIR irradiation drove the PTT, and at the same time improved the CDT by increasing the production of ˙OH and triggered DOX release for chemotherapy. In addition, the Au nanoparticles on the surface of Fe-HPPy@Au nanocomposites could be used as a CT imaging agent and catalyzer to produce H₂O₂ for enhanced CDT.

Graphene Quantum Dots Wrapped Gold Nanoparticles with Integrated Enhancement Mechanisms as Sensitive and Homogeneous Substrates for Surface-Enhanced Raman Spectroscopy

Rational engineering of highly stable and Raman-active nanostructured substrates is still urgently in demand for achieving sensitive and reliable surface-enhanced Raman spectroscopy (SERS) analysis in solution phase. Herein, monodisperse N-doping graphene quantum dots wrapped Au nanoparticles (Au-NGQD NPs) were facilely prepared, and further their applications as substrates in SERS-based detection and cellular imaging have been explored. The as-prepared Au-NGQD NPs exhibit superior long-term stability and biocompatibility, as well as large enhancement capability due to the integration of electromagnetic and chemical enhancements. The practical applicability of the Au-NGQD NPs was verified via the direct SERS tests of several kinds of aromatics in solution phase. Finite-difference time-domain simulations in combination with density functional theory calculation were also successfully used to explain the enhancement mechanism. Furthermore, the Au-NGQD NPs were conjugated with 4-nitrobenzenethiol (4-NBT, as reporter) and 4-mercaptophenylboronic acid (MPBA, as targeting element) to construct the MPBA/4-NBT@Au-NGQD probes, which could specifically recognize glycan-overexpressed cancer cells through SERS imaging on a cell surface. The prepared Au-NGQDs show great potential as superior SERS substrates in solution phase for on-site Raman detection.

Novel phthalocyanine-based polymeric micelles with high near-infrared photothermal conversion efficiency under 808 nm laser irradiation for in vivo cancer therapy

Photothermal therapy (PTT) has emerged as one of the promising methodologies for the treatment of cancer, and ideal photothermal agents need to be biodegradable and have strong optical absorbance in the near-infrared (NIR) optical window. Here, we report a new phthalocyanine molecule, 4OCSPC, which expands the absorbance edge to 850 nm. Under 808 nm NIR laser irradiation, 4OCSPC polymeric micelles showed robust photostability and a high photothermal conversion of 47.0%. Also, the 4OCSPC polymeric micelles exhibit a high in vivo PTT efficacy against 4T1 tumors in mice.

One-pot synthesis of polypyrrole nanoparticles with tunable photothermal conversion and drug loading capacity

With an excellent near-infrared (NIR) light-responsive property, polypyrrole (PPy) nanoparticle has emerged as a promising NIR photothermal transducing agent for tumor photothermal therapy (PTT). Herein, we reported the PVP mediated one-pot synthesis of colloidal stable and biocompatible PPy nanoparticles (PPy-PVP NPs) for combined tumor photothermal-chemotherapy. The influence of molecular weight and PVP concentration on the spectroscopic characteristic, photothermal feature, drug loading performance, and antitumor efficiency of the resultant PPy-PVP NPs was systematically studied. By choosing PVP with a molecular weight of 360 kDa (concentration of 5 mg/mL) as the template and surface modifier during the synthesis, PPy-PVP NPs with optimal spectroscopic characteristic, photothermal feature, drug loading performance, and antitumor efficiency were synthesized. Findings in this study are anticipated to provide an in-depth understanding of the important character of surface engineering in the rational design and biomedical applications of PPy NPs.

Bandgap Engineered Polypyrrole-Polydopamine Hybrid with Intrinsic Raman and Photoacoustic Imaging Contrasts

Intrinsically multimodal nanomaterials have revealed their great potential as a new class of contrast agents. We herein report a bandgap engineering strategy to develop an intrinsically Raman-photoacoustic (PA) active probe that is based on semiconducting conjugated polymers. This dual modal probe is prepared by doping a semiconducting conjugated polymer with polydopamine (PDA) through a one-pot reaction. When applied in the polypyrrole (PPy), this strategy can enhance Raman scattering and the PA amplitude of PPy-PDA hybrid by 3.2 and 2.4 times, respectively, so that both signals can be further applied in bioimaging. In the hybrid, such a dual-enhancement effect is achieved by infusing these two macromolecules at the nanoscale to reduce the optical bandgap energy. This work not only introduces a dual modal contrast agent but also provides a new method of manipulating semiconducting polymer's inherent optical features for bioimaging.

One-Step Synthesis of Iodinated Polypyrrole Nanoparticles for CT Imaging Guided Photothermal Therapy of Tumors

Theranostic materials are of great significance to a personalized precise medicine. However, conventional theranostic agents are mainly fabricated by combining presynthesized independent imaging probes and therapeutic agents, suffering from multiple synthesis procedures, poor morphological control, and time/reagent-consuming process. Herein, iodinated polypyrrole (I-PPy) nanoparticles are fabricated via a one-step synthesis strategy combining chemical oxidation and iodination for computed tomography (CT) imaging-guided photothermal therapy. Iodic acid with a high standard electrode potential enables the chemical oxidation polymerization of pyrrole monomers. Meanwhile, the iodination of PPy induced by the corresponding reduction product I₂ takes place during the polymerization process to generate I-PPy nanoparticles. The prepared I-PPy nanoparticles possess a uniform size, excellent colloidal stability, intense near-infrared absorption, strong X-ray attenuation ability, and favorable biocompatibility. The as-synthesized I-PPy nanoparticles not only guarantee remarkable contrast-enhanced CT imaging of blood pool and tumors, but also realize effective tumor suppression in vitro and in vivo by I-PPy nanoparticles-mediated CT imaging-guided photothermal therapy. To the best of the authors' knowledge, it is the first time that multifunctional PPy nanoparticles are fabricated through a one-step synthesis process. The proposed strategy opens up a new way for the fabrication of high-performance theranostic agents via a one-step strategy under mild conditions.

In Vitro and In Vivo SERS Biosensing for Disease Diagnosis

For many disease states, positive outcomes are directly linked to early diagnosis, where therapeutic intervention would be most effective. Recently, trends in disease diagnosis have focused on the development of label-free sensing techniques that are sensitive to low analyte concentrations found in the physiological environment. Surface-enhanced Raman spectroscopy (SERS) is a powerful vibrational spectroscopy that allows for label-free, highly sensitive, and selective detection of analytes through the amplification of localized electric fields on the surface of a plasmonic material when excited with monochromatic light. This results in enhancement of the Raman scattering signal, which allows for the detection of low concentration analytes, giving rise to the use of SERS as a diagnostic tool for disease. Here, we present a review of recent developments in the field of in vivo and in vitro SERS biosensing for a range of disease states including neurological disease, diabetes, cardiovascular disease, cancer, and viral disease.

Assembled growth of 3D Fe3O4@Au nanoparticles for efficient photothermal ablation and SERS detection of microorganisms

A leukocyte-like Fe₃O₄@Au-polydopamine nanohybrid performed a magnetism-based enhanced SERS signal and efficient NIR-irradiated photothermal antibacterial agent.