Improved structure of Zr-BTC metal organic framework using NH2 to enhance CO2 adsorption performance

Modified mesoporous NH2-Zr-BTC mixed ligand MOF nanocomposites were synthesized via the hydrothermal method as a novel adsorbent for CO2 capture. The newly modified MOF-808 with NH2 demonstrated a similar mesoporous morphology as MOF-808, whereas the specific surface area, pore volume, and average particle size, respectively, increased by 15%, 6%, and 46% compared to those of MOF-808. The characterization analyses exhibited the formation of more active groups on the adsorbent surface after modification. In addition, a laboratory adsorption setup was used to evaluate the effect of temperature, pressure, and NH2 content on the CO2 adsorption capacity in the range of 25-65 °C, 1-9 bar, and 0-20 wt%, respectively. An increase in pressure and a decrease in temperature enhanced the adsorption capacity. The highest equilibrium adsorption capacity of 369.11 mg/g was achieved at 25 °C, 9 bar, and 20 wt% NH2. By adding 20 wt% NH2, the maximum adsorption capacity calculated by the Langmuir model increased by about 4% compared to that of pure MOF-808. Moreover, Ritchie second-order and Sips models were the best-fitted models to predict the kinetics and isotherm data of CO2 adsorption capacity with the high correlation coefficient (R2 > 0.99) and AARE% of less than 0.1. The ΔH°, ΔS°, and ΔG° values were - 17.360 kJ/mol, - 0.028 kJ/mol K, and - 8.975 kJ/mol, respectively, demonstrating a spontaneous, exothermic, and physical adsorption process. Furthermore, the capacity of MH-20% sample decreased from 279.05 to 257.56 mg/g after 15 cycles, verifying excellent stability of the prepared mix-ligand MOF sorbent.

Metal imidazolate sulphate frameworks as a variation of zeolitic imidazolate frameworks

Sulphate ions can be incorporated into zinc imidazolate frameworks to give rise to zinc imidazolate sulphate frameworks, that is, a square-grid network, a zeolite-like GIS framework, or a porous pillar-layered structure where interlayer octahedral Zn²⁺ ions connect honeycomb-like layers.

Deciphering the Weak CO2···Framework Interactions in Microporous MOFs Functionalized with Strong Adsorption Sites-A Ubiquitous Observation

Carbon capture from industrial effluents such as flue gas or natural gas mixture (cf. landfill gas), the primary sources of CO₂ emission, greatly aids in balancing the environmental carbon cycle. In this context, the most energy-efficient physisorptive CO₂ separation process can benefit immensely from improved porous sorbents. Metal organic frameworks (MOFs), especially the ultramicroporous MOFs, built from readily available small and rigid ligands, are highly promising because of their high selectivity (CO₂/N₂) and easy scalability. Here, we report two new ultramicroporous Co-adeninato isophthalate MOFs. They concomitantly carry basic functional groups (-NH₂) and Lewis acidic sites (coordinatively unsaturated Co centers). They show good CO₂ capacity (3.3 mmol/g at 303 K and 1 bar) along with high CO₂/N₂ (∼600 at 313 K and 1 bar and ∼340 at 303 K and 1 bar) selectivity, working capacity, and smooth diffusion kinetics (D_c = 7.5 × 10^-9 m² s^-1). The MOFs exhibit good CO₂/N₂ kinetic separation under both dry and wet conditions with a smooth breakthrough profile. Despite their well-defined CO₂ adsorption sites, these MOFs exhibit only a moderately strong interaction with CO₂ as evidenced from their HOA values. This counterintuitive observation is ubiquitous among many MOFs adorned with strong CO₂ adsorption sites. To gain insights, we have identified the binding sites for CO₂ using simulation and MD studies. The radial distribution function analysis reveals that despite the amine and bare-metal sites, the pore size and the pore structure determine the positions for the CO₂ molecules. The most favorable sites become the confined spaces lined by aromatic rings. A plausible explanation for the lack of strong adsorption in these MOFs is premised from these collective studies, which could aid in the future design of superior CO₂ sorbents.