Immobilization of horseradish peroxidase on metal-organic framework to imporve enzyme activity for enhanced chemodynamic therapy

Bio-enzymes have the advantages of strong substrate specificity, high catalytic efficiency, and minimal toxic side effects, making them promising drugs in cancer therapy. However, the poor stability and cellular penetrability of uncoated protein in the physiological environment severely restricts the direct application of Bio-enzyme. To address it, we report a metal-organic framework (MOF), Hf-DBA (H2DBA, biphenyl carboxylic acid ligands). The morphology of the Hf-DBA was revealed by TEM and the diameter was in the range of 200 to 350 nm. Hf-DBA acted a carrier for intracellular delivery and protection of horseradish peroxidase (HRP). The prepared HRP@Hf-DBA can catalyze the excess H2O2 in the tumor cells to generation of •OH for chemodynamic therapy (CDT). Compared with free HRP, the catalytic activity of HRP@Hf-DBA is significantly improved, and the optimal catalytic conditions are explored. The catalytic stability of HRP@Hf-DBA remained above 70% after 12 cycles of catalysis. After treatment with HRP@Hf-DBA, the apoptosis rates of A549 and Hela cells was 71.64%, and 76.86%. The results in vitro show that HRP@Hf-DBA can effectively inhibit the growth of tumor cells through enhanced CDT.

Sensitive fluorescent detection of phosmet and chlortetracycline in animal-derived food samples based on a water-stable Cd(II) chain-based zwitterionic metal-organic framework

The residues of pesticides and antibiotics have always been a major concern in agriculture and food safety. In order to provide a new method for the rapid detection of organophosphorus pesticides and antibiotics, a novel Cd(II) chain-based zwitterionic metal-organic framework MOF 1 with high sensitivity fluorescence sensing performance was successfully synthesized. A series of researches showed that the water- and pH-stable bifunctional MOF 1 has a great ability to detect phosmet (PSM) and chlortetracycline (CTC) in water through fluorescence quenching effect, with high detection sensitivity, low detection limits (0.0124 μM and 0.0131 μM), short response time (40 s) and reusability. Practical application results revealed that MOF 1 could detect PSM and CTC in milk, beef, chicken and egg samples, with satisfactory recoveries (95.2%-103.7%). As a novel fluorescence probe, MOF 1, is known the first case that can detect PSM in animal-derived samples, and the first dual-function material capable of detecting PSM and CTC. Mechanism studies displayed that competitive absorption and photoinduced electron transfer clearly authenticate the high quenching performance of the material.

A Dihydrotetrazine-Functionalized Metal-Organic Framework as a Highly Selective Luminescent Host-Guest Sensor for Detection of 2,4,6-Trinitrophenol

Pore decoration of metal-organic frameworks (MOFs) with functional groups is a useful strategy to attain high selectivity toward specific analytes, especially in the presence of interfering molecules with similar structures and energy levels, through selective host-guest interactions. In this work, we applied a dihydrotetrazine-decorated MOF, TMU-34, with the formula [Zn(OBA)(H₂DPT)_0.5]_n·DMF, where H₂OBA is 4,4'-oxybis(benzoic acid) and H₂DPT is 3,6-bis(pyridin-4-yl)-1,4-dihydro-1,2,4,5-tetrazine, for the highly selective detection of phenolic NACs, especially TNP (94% quenching efficiency, detection limit 8.1 × 10^-6 M, K_SV = 182663 mol L^-1), in the presence of other substituted NACs especially -NH₂-substituted NACs. Investigations reveal that the quenching mechanism is dominated by photoinduced MOF-to-TNP electron transfer through possible hydrogen-bonding interactions between the phenolic hydroxyl group of TNP and dihydrotetrazine functions of TMU-34. Despite extensive publications on the detection of TNP in the presence of other NACs, the significance of this work will be elucidated if attention is paid to the fact that TMU-34 is among the rare and highly selective MOF-based TNP sensors in the presence of -NH₂-substituted NACs as the serious interferers.

A highly active oxygen evolution electrocatalyst derived from Co/Ni-succinic acid framework under mild conditions

By utilizing a Co-MOF consisting of succinic acid, Co/Ni/B derivatives were synthesized under mild conditions to act as efficient OER electrocatalysts.

Tetraphenylpyrazine-Based Manganese Metal-Organic Framework as a Multifunctional Sensor for Cu2+, Cr3+, MnO4-, and 2,4,6-Trinitrophenol and the Construction of a Molecular Logical Gate

A tetraimidazole-decorating tetraphenylpyrazine has been designed and utilized for the fabrication of a novel metal-organic framework (MOF), denoted as {Mn(Tipp)(A)₂}_n·2H₂O (TippMn, where Tipp = 2,3,5,6-tetrakis[4-[(1H-imidazol-1-yl)methyl]phenyl]pyrazine and A = deprotonation of 1,4-naphthalenedicarboxylic acid), through hydrothermal synthesis. Structural analysis reveals that TippMn possesses a 2-fold-interpenetrated 4,8-connected three-dimensional (3D) network with an unprecedented {4¹⁶·6¹²}{4⁴·6²} topology. Fluorescent spectral investigations indicate that TippMn shows discriminative fluorescence when treated by Cr³⁺ and Cu²⁺, giving an INHIBIT logical gate performance. Meanwhile, TippMn can be further used as a sensor for MnO₄^- and 2,4,6-trinitrophenol (TNP) by fluorescence quenching. Notably, the sensing processes toward Cu²⁺, Cr³⁺, MnO₄^-, and TNP are labeled with high selectivity and sensitivity, quick response, and good recyclability. It is anticipated that this MOF-based versatile sensor could shed light on the exploration of MOFs for fluorescent sensors, optical switches, etc.

Rare-Earth-Based Metal-Organic Frameworks as Multifunctional Platforms for Catalytic Conversion

The development of catalytic conversion is very important for human society. In the catalytic process, metal-organic frameworks (MOFs) can be utilized to obtain effective catalysts for their porous structures and adjustable properties. In addition, the introduction of rare-earth (RE) elements with unique properties for catalysts can realize good catalytic performances. Thus, the RE-MOF related catalysts for catalytic conversion are summarized. Due to the cooperation of RE elements and porous MOF structures, the RE-based MOFs can be used as promising catalysts or precursors/supports for other catalysts in the areas of energy conversion, environmental governance, and organic synthesis. These aggregated studies highlight the RE-MOFs as promising candidates for catalytic conversion.

Crystal structures of [(μ2-L1)di-bromidodicopper(II)] dibromide and poly[[(μ2-L1)diiodido-dicopper(I)]-di-μ-iodido-dicopper(I)], where L1 is 2,5,8,11,14,17-hexa-thia-[9.9](2,6,3,5)-pyrazino-phane

The reaction of the hexa-thia-pyrazino-phane ligand, 2,5,8,11,14,17-hexa-thia-[9.9](2,6,3,5)-pyrazino-phane (L1), with copper(II) dibromide led to the formation of a binuclear complex, [μ2-2,5,8,11,14,17-hexa-thia-[9.9](2,6,3,5)-pyrazino-phane]bis-[bromi-docopper(II)] dibromide, [Cu2Br2(C16H24N2S6)]Br2, (I). The complex possesses inversion symmetry with the pyrazine ring being situated about a center of symmetry. The ligand coordinates to the copper(II) atom in a bis-tetra-dentate manner and the copper atom has a fivefold NS3Br coordination environment with a distorted shape. The reaction of ligand L1 with copper(I) iodide also gave a binuclear complex, which is bridged by a Cu2I2 unit to form a two-dimensional coordination polymer, poly[[μ2-2,5,8,11,14,17-hexa-thia-[9.9](2,6,3,5)-pyrazino-phane]tetra-μ-iodido-tetra-copper(I)], [Cu4I4(C16H24N2S6)] n , (II). The binuclear unit possesses inversion symmetry with the pyrazine ring being located about a center of symmetry. The Cu2I2 unit is also located about an inversion center. The two independent copper(I) atoms are both fourfold coordinate. That coordinating to the ligand L1 in a bis-tridentate manner has an NS2I coordination environment and an irregular shape, while the second copper(I) atom, where L1 coordinates in a bis-monodentate manner, has an SI3 coordination environment with an almost perfect tetra-hedral geometry. In the crystal of I, the cations and Br- anions are linked by a number of C-H⋯S and C-H⋯Br hydrogen bonds, forming a supra-molecular network. In the crystal of II, the two-dimensional coordination polymers lie parallel to the ab plane and there are no significant inter-layer contacts present.

Novel Ce(III)-Metal Organic Framework with a Luminescent Property To Fabricate an Electrochemiluminescence Immunosensor

We designed a novel luminescent metal-organic framework (MOF) named Ce-TCPP-LMOF (CTM) through a simple one-pot solvothermal method. CTM was synthesized by using the emerging electrochemiluminescent (ECL) material (4,4',4″,4‴-(porphine-5,10,15,20-tetrayl)tetrakis(benzoic acid) as the organic ligand and Ce(III) as the metal node. We found that CTM not only has the remarkable ability to emit light but also has a uniform "sandwich biscuit" shape and suitable nanoscale size, which are promising for further applications. We also applied CTM to construct a novel ECL immunosensor and achieve sensitive detection of the proprotein convertase subtilisin/kexin type 9 (PCSK9), a biomarker related to cardiovascular diseases. To further amplify the ECL signal of CTM, a novel dual-amplified signal strategy was established by inducing a polyamidoamine dendrimer (PAMAM) and gold nanoparticles (AuNPs). Importantly, we first proved that the ECL signal of the CTM/S₂O₈^2- system could be enhanced by the PAMAM electric field. As the electron transfer rate was accelerated by the AuNP layer, this ECL signal was further enhanced in AuNP-modified electrodes. The ECL immunosensor showed desirable performance for PCSK9 analysis within a detection range of 50 fg mL^-1 to 10 ng mL^-1 and a low limit of detection of 19.12 ± 2.69 fg mL^-1. Real sample detection suggested that the immunosensor holds great potential for analyzing clinical serum samples.

Sensing organic analytes by metal–organic frameworks: a new way of considering the topic

In this review, our goal is comparison of advantageous and disadvantageous of MOFs about signal-transduction in different instrumental methods for detection of different categories of organic analytes.

Temperature-induced structural diversity of metal-organic frameworks and their applications in selective sensing of nitrobenzene and electrocatalyzing the oxygen evolution reaction

Structural diversities are presented in four new Co-MOFs containing 1,5-bi(imidazolyl)anthracene and different dibenzobarrelene skeletons based on dicarboxylic acid, in which MOFs 1-3 exhibit 2D networks in a 4-connected node sql topology with the point symbol of {44·62}, while MOF 4 forms a 1D chain structure. It is clearly observed that the 2D-1D structural transformation of 2-4 has been realized by temperature modulated hydrothermal synthesis procedures from 120-160 °C, suggesting the key role of temperature for constructing MOFs. In addition, obvious π-π interactions between anthracene rings can be observed in the architectures of 1-3, which may favorably stabilize their 2D supramolecular networks. More importantly, fluorescence behaviors of 1-4 have been investigated in water among various nitro-aromatic compounds (NACs) and the results show that all samples exhibit high selectivity and fine sensitivity to nitrobenzene (NB) with fluorescence quenching, which is confirmed to be the result of electron transfer from the excited state of ligands to that of NB by density functional theory. Furthermore, MOFs 1-4 have been directly employed as electrocatalysts for the oxygen evolution reaction (OER), in which MOF 4 gives the best activity towards the OER among all as-synthesized samples with an overpotential of 398 mV at a current density of 10 mA cm-2 and a low Tafel slope of 59 mV dec-1.