Lead (Pb) interfacing with epitaxial graphene

Modifications of Epitaxial Graphene on SiC for the Electrochemical Detection and Identification of Heavy Metal Salts in Seawater

The electrochemical detection of heavy metal ions is reported using an inexpensive portable in-house built potentiostat and epitaxial graphene. Monolayer, hydrogen-intercalated quasi-freestanding bilayer, and multilayer epitaxial graphene were each tested as working electrodes before and after modification with an oxygen plasma etch to introduce oxygen chemical groups to the surface. The graphene samples were characterized using X-ray photoelectron spectroscopy, atomic force microscopy, Raman spectroscopy, and van der Pauw Hall measurements. Dose-response curves in seawater were evaluated with added trace levels of four heavy metal salts (CdCl₂, CuSO₄, HgCl₂, and PbCl₂), along with detection algorithms based on machine learning and library development for each form of graphene and its oxygen plasma modification. Oxygen plasma-modified, hydrogen-intercalated quasi-freestanding bilayer epitaxial graphene was found to perform best for correctly identifying heavy metals in seawater.

Understanding of the Electrochemical Behavior of Lithium at Bilayer-Patched Epitaxial Graphene/4H-SiC

Novel two-dimensional materials (2DMs) with balanced electrical conductivity and lithium (Li) storage capacity are desirable for next-generation rechargeable batteries as they may serve as high-performance anodes, improving output battery characteristics. Gaining an advanced understanding of the electrochemical behavior of lithium at the electrode surface and the changes in interior structure of 2DM-based electrodes caused by lithiation is a key component in the long-term process of the implementation of new electrodes into to a realistic device. Here, we showcase the advantages of bilayer-patched epitaxial graphene on 4H-SiC (0001) as a possible anode material in lithium-ion batteries. The presence of bilayer graphene patches is beneficial for the overall lithiation process because it results in enhanced quantum capacitance of the electrode and provides extra intercalation paths. By performing cyclic voltammetry and chronoamperometry measurements, we shed light on the redox behavior of lithium at the bilayer-patched epitaxial graphene electrode and find that the early-stage growth of lithium is governed by the instantaneous nucleation mechanism. The results also demonstrate the fast lithium-ion transport (~4.7–5.6 × 10⁻⁷ cm²∙s⁻¹) to the bilayer-patched epitaxial graphene electrode. Raman measurements complemented by in-depth statistical analysis and density functional theory calculations enable us to comprehend the lithiation effect on the properties of bilayer-patched epitaxial graphene and ascribe the lithium intercalation-induced Raman G peak splitting to the disparity between graphene layers. The current results are helpful for further advancement of the design of graphene-based electrodes with targeted performance.

Epitaxial Graphene on 4H-SiC (0001) as a Versatile Platform for Materials Growth: Mini-Review

Material growth on a dangling-bond-free interface such as graphene is a challenging technological task, which usually requires additional surface pre-treatment steps (functionalization, seed layer formation) to provide enough reactive sites. Being one of the most promising and adaptable graphene-family materials, epitaxial graphene on SiC, due to its internal features (substrate-induced n-doping, compressive strain, terrace-stepped morphology, bilayer graphene nano-inclusions), may provide pre-conditions for the enhanced binding affinity of environmental species, precursor molecules, and metal atoms on the topmost graphene layer. It makes it possible to use untreated pristine epitaxial graphene as a versatile platform for the deposition of metals and insulators. This mini-review encompasses relevant aspects of magnetron sputtering and electrodeposition of selected metals (Au, Ag, Pb, Hg, Cu, Li) and atomic layer deposition of insulating Al2O3 layers on epitaxial graphene on 4H-SiC, focusing on understanding growth mechanisms. Special deliberation has been given to the effect of the deposited materials on the epitaxial graphene quality. The generalization of the experimental and theoretical results presented here is hopefully an important step towards new electronic devices (chemiresistors, Schottky diodes, field-effect transistors) for environmental sensing, nano-plasmonics, and biomedical applications.

Electrochemical Deposition of Copper on Epitaxial Graphene

Understanding the mechanism of metal electrodeposition on graphene as the simplest building block of all graphitic materials is important for electrocatalysis and the creation of metal contacts in electronics. The present work investigates copper electrodeposition onto epitaxial graphene on 4H-SiC by experimental and computational techniques. The two subsequent single-electron transfer steps were coherently quantified by electrochemistry and density functional theory (DFT). The kinetic measurements revealed the instantaneous nucleation mechanism of copper (Cu) electrodeposition, controlled by the convergent diffusion of reactant to the limited number of nucleation sites. Cu can freely migrate across the electrode surface. These findings provide fundamental insights into the nature of copper reduction and nucleation mechanisms and can be used as a starting point for performing more sophisticated investigations and developing real applications.

Interaction of epitaxial graphene with heavy metals: towards novel sensing platform

Development of next-generation sensors based on graphene materials, especially epitaxial graphene (EG) as the most promising representative, with desirable cross-reactivity to heavy metals (HMs) is of great technological significance in the virtue of enormous impact on environmental sensorics. Nevertheless, the mechanisms by which EG responds to toxic HMs exposure and then produces the output signal are still obscure. In the present study, the nature of interaction of toxic HMs, e.g. Cd, Hg and Pb in neutral charge state and EG on Si-face SiC in the absence and in the presence of pure water solution has been investigated using density functional theory with the inclusion of dispersion correction and cluster model of EG. The gas-phase calculations showed that adsorbed electron-donating Cd and Hg adatoms on EG are most stable when bonded to hollow sites, while Pb species prefer to sit above bridge sites. By using non-covalent interaction analysis, charge decomposition analysis, overlap population density of states analysis and topological analysis, it was found that the interaction between Cd or Hg and EG is non-bonding in nature and is mainly governed by van der Waals forces, while Pb adsorption is followed by the formation of anti-bonding orbitals in vacuum conditions and bonding orbitals in water. The role of solvent in the adsorption behavior of HMs is studied and discussed. The present theoretical analysis is in good agreement with recent experimental results towards discriminative electrochemical analysis of the toxic HMs in aqueous solutions at critically low concentrations.

Understanding Graphene Response to Neutral and Charged Lead Species: Theory and Experiment

Deep understanding of binding of toxic Lead (Pb) species on the surface of two-dimensional materials is a required prerequisite for the development of next-generation sensors that can provide fast and real-time detection of critically low concentrations. Here we report atomistic insights into the Lead behavior on epitaxial graphene (Gr) on silicon carbide substrates by thorough complementary study of voltammetry, electrical characterization, Raman spectroscopy, and Density Functional Theory (DFT). It is verified that the epitaxial graphene exhibits quasi-reversible anode reactions in aqueous solutions, providing a well-defined redox peak for Pb species and good linearity over a concentration range from 1 nM to 1 µM. The conductometric approach offers another way to investigate Lead adsorption, which is based on the formations of stable charge-transfer complexes affecting the p-type conductivity of epitaxial graphene. Our results suggest the adsorption ability of the epitaxial graphene towards divalent Lead ions is concentration-dependent and tends to saturate at higher concentrations. To elucidate the mechanisms responsible for Pb adsorption, we performed DFT calculations and estimated the solvent-mediated interaction between Lead species in different oxidative forms and graphene. Our results provide central information regarding the energetics and structure of Pb-graphene interacting complexes that underlay the adsorption mechanisms of neutral and divalent Lead species. Such a holistic understanding favors design and synthesis of new sensitive materials for water quality monitoring.

Interband transitions in closed-shell vacancy containing graphene quantum dots complexed with heavy metals

High-performance optical detection of toxic heavy metals by using graphene quantum dots (GQDs) requires a strong interaction between the metals and GQDs, which can be reached through artificial creation of vacancy-type defects in GQDs.