Sonocatalytic degradation of tetracycline hydrochloride using SnO2 hollow-nanofiber decorated with UiO-66-NH2

In this study, a porous hollow nanofiber SnO2 was decorated with UiO-66-NH2 nanoparticles with straightforward solvothermal method and utilized for sonocatalytic degradation of tetracycline (TC) by ultrasonic irradiation (USI). The prepared materials were characterized using different techniques such as SEM, EDS, FTIR, XRD, BET, XPS, UV-DRS, EIS, and zeta potential. SnO2 PHNF/UiO-66-NH2 nanocomposite offered the highest apparent rate constant of 0.0397 min-1 which was 6.3 and 3.1 times higher than those obtained for SnO2 PHNF and UiO-66-NH2, respectively. The integration of nanocomposite components revealed the synergy factor of 1.58, which can be due to the created heterojunctions resulted in efficiently charge carriers separation and retaining high redox ability. The effects of different affecting parameters such as TC initial concentration, pH of the solution, catalyst dosage, trapping agents, and coexisting anions on the catalytic performance were examined. The inhibitory effects of anions were confirmed to be decreased in the sequence of Cl- > NO3- > SO42-, while the sonocatalytic efficiency of the nanocomposite improved considerably in the presence of humic acid and bicarbonate. Also, the excellent performance of the catalyst was preserved during six successive cycles, suggesting the high stability of the prepared catalyst. In addition, based on the scavenger analysis, the created O2·-, OH·, and holes were contributed to the TC degradation. In conclusion, the creation heterojunction is an impressive methodology for improving the sonocatalytic activity of a catalyst, and SnO2 PHNF/UiO-66-NH2 nanocomposite was introduced as a satisfactory catalyst in sonocatalytic degradation of organic contaminants.

Synthesis of magnetic layered double hydroxide (Fe3O4@CuCr-LDH) decorated with ZIF-8 for efficient sonocatalytic degradation of tetracycline

A series of Fe3O4@CuCr-LDH hybrids decorated with different amount of ZIF-8 (FLZ, 10-40 wt%) was prepared using simple methods and characterized with different techniques. The activity of the synthesized nanocomposites was investigated in the sonocatalytic degradation of tetracycline (TC) antibiotic from wastewater. When the content of ZIF-8 in the nanocomposite structure was 20 wt%, the FLZ-20 sonocatalyst exhibited the high performance in the sonocatalytic removal of TC. At optimum conditions (0.7 g/L catalyst dosage, pH of 7, 50 mg/L initial concentration of antibiotic, and 15 min sonication time) of the sonocatalytic removal of TC approached to 91.4% under ultrasonic irradiation (USI) using FLZ-20. This efficiency was much higher than those of obtained results by Fe3O4@CuCr-LDH and pristine ZIF-8. The formed ●OH and ●O2- exhibited the major roles in the sonocatalytic TC degradation process. The excellent performance of FLZ-20 can be attributed to the heterojunctions created between composite components, which could improve the electron transfer ability and effectively separate e-/h+ pairs. In addition, FLZ-20 showed the superior reusability and stability during three successive recycling. Moreover, the facile magnetically separation of the sonocatalyst from the aqueous solution was another outstanding feature, which prevents the formation of secondary pollutants. It can be concluded that the fabrication of heterojunctions is an efficient procedure to promote the sonocatalytic acting of the catalyst.

Controlled Ni doping on a g-C3N4/CuWO4 photocatalyst for improved hydrogen evolution

The development of a low-cost, environment-friendly and suitable semiconductor-based heterogeneous photocatalyst poses a great challenge towards extremely competent and substantial hydrogen evolution. A series of environment-friendly and proficient S-scheme Ni-doped CuWO4 nanocrystals supported on g-C3N4 nanocomposites (Ni-CuWO4/g-C3N4) were constructed to ameliorate the photocatalytic efficacy of pure g-C3N4 and Ni-CuWO4 and their activity in H2 generation through photocatalytic water splitting was evaluated. The Ni-CuWO4 nanoparticles were synthesized through doping of Ni2+ on wolframite CuWO4 crystals via the chemical precipitation method. An elevated hydrogen generation rate of 1980 μmol h-1 g-1 was accomplished over the 0.2Ni-CuWO4/g-C3N4 (0.2NCWCN) nanocomposite with an apparent quantum yield (AQY) of 6.49% upon visible light illumination (λ ≥ 420 nm), which is evidently 7.1 and 17.2 fold higher than those produced from pristine g-C3N4 and Ni-CuWO4. The substantial enhancement in the photocatalytic behaviour is primarily because of the large surface area, limited band gap energy of the semiconductor composite and magnified light harvesting capability towards visible light through the inclusion of g-C3N4, thus diminishing the reassembly rate of photoinduced excitons. Further, density functional theory (DFT) calculations were performed to investigate the structural, electronic and optical properties of the composite. Theoretical results confirmed that the Ni-CuWO4/g-C3N4 composite is a potential candidate for visible-light-driven photocatalysts and corroborated with the experimental findings. This research provides a meaningful and appealing perspective on developing cost-effective and very proficient two-dimensional (2D) g-C3N4-based materials for photocatalytic H2 production to accelerate the separation and transmission process of radiative charge carriers.

In Situ Hydrothermal Synthesis of Ni1-xMnxWO4 Nanoheterostructure for Enhanced Photodegradation of Methyl Orange

The monoclinic nanocrystalline Ni_1-xMn_xWO₄ heterostructure has been successfully synthesized by the hydrothermal technique for achieving better sensitive and photocatalytic performances. Different characterization techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible (UV-Vis), and photoluminescence (PL) spectroscopy have been employed to investigate their structural, microstructural, and optical properties. Mn-ion incorporation in the NiWO₄ lattice reduces the particle size of the sample compared with the pure undoped NiWO₄ sample, which has been confirmed from the transmission electron microscope image. The Tauc plot of the Ni_1-xMn_xWO₄ sample exhibits a significant decrease in bandgap energy compared with the pure undoped NiWO₄ sample due to the quantum confinement effect. Finally, the material was explored as a photocatalyst for the degradation of methyl orange (MO) dye from wastewater under visible light irradiation. Various reaction parameters such as pH, catalyst dose, reaction time, and kinetics of the photodegradation were studied using the batch method. The results showed that the Ni_1-xMn_xWO₄ is highly efficient (94.51%) compared with undoped NiWO₄ (65.45%). The rate of photodegradation by Ni_1-xMn_xWO₄ (0.067) was found to be 1.06 times higher than the undoped NiWO₄ (0.062).

Uplifting the charge carrier separation and migration in Co-doped CuBi2O4/TiO2 p-n heterojunction photocathode for enhanced photoelectrocatalytic water splitting

Here, cobalt-doped copper bismuth oxide (Co-CuBi₂O₄) was synthesized via a facile hydrothermal method for photoelectrocatalytic (PEC) hydrogen production. The results disclosed that the 5% Co-doped CuBi₂O₄ has better PEC activity which is ∼3 fold higher than pristine CuBi₂O₄. The doping of cobalt in CuBi₂O₄ improves the interfacial charge transfer at an electrode/electrolyte interface and reduces the recombination rate of photogenerated electron-hole pairs. This higher performed 5% Co-doped CuBi₂O₄ photocathode further modified with TiO₂-P25 to form a Co-CuBi₂O₄/TiO₂ p-n heterojunction. This Co-CuBi₂O₄/TiO₂ photocathode displayed a photocurrent density of 330 μA cm^-2 at +0.5 V vs. RHE which was ∼2 fold higher than Co-CuBi₂O₄. Because this p-n junction affords inner electric field in the space charge region that helps for further minimization of electron-hole recombination, which facilitate efficient charge separation and transport thereby enhance the PEC water reduction.

Z-scheme heterojunction based on NiWO4/WO3 microspheres with enhanced photocatalytic performance under visible light

The green treatment of dye wastewater has always been a research hotspot in the environmental field. The photocatalytic technology is considered to be a simple and effective strategy to remove dyes in wastewater. A new type of NiWO₄/WO₃ Z-scheme heterojunction microspheres were synthesized by a simple hydrothermal method and impregnation-calcination process. The crystal structure, microscopic morphology, optical and electrochemical properties of the samples were systematically characterized. The photocatalytic activity of methylene blue (MB) was studied by visible light irradiation. The results show that the direct Z-scheme heterojunction formed by NiWO₄/WO₃ effectively reduces the transfer resistance of photogenerated carriers and improves the separation efficiency of photogenerated carriers. The degradation rates of NiWO₄/WO₃-4 Z-scheme heterojunction microspheres to MB dye are 1.8 and 3.2 times higher than that of pure WO₃·2H₂O and WO₃ microspheres, respectively. Combined with the Mott-Schottky curve and the active species capture experiments, a possible Z-scheme photogenerated carrier transfer mechanism is proposed. This study provides a method for the development and design of Z-scheme heterojunction photocatalysts in the field of wastewater purification.

Self-Powered Low-Cost UVC Sensor Based on Organic-Inorganic Heterojunction for Partial Discharge Detection

Power outages caused by the aging of high-voltage power facilities can cause significant economic and social damage. To prevent such problems, it is necessary to implement a widespread and sustainable monitoring system. Partial discharge (PD) is a preliminary symptom of power equipment aging accompanying the light, typically in the UV range. UVC (200-280 nm) is more useful than UVA and UVB because of low interference from the environment owing to its solar-blindness by the stratosphere. Therefore, to realize a wide-range and durable diagnosis system, it is necessary to develop sensors that can selectively detect UVC, while enabling mass production at low-cost and low power consumption. Here, a solution-processable photodiode sensor that is inexpensive, mass-producible, and self-powered with selective UVC detection is developed. The optoelectronic characteristics of photodiode consisting of organic p-polymer and inorganic n-ZnO nanoparticles are systematically studied to determine the optimum p-type polymer and its thickness. The device shows high-performance: fast response time (rise/fall time: 36.6/37.0 ms) and high spectral response in the UVC region (maximum responsivity of 20 mA W^-1 ) under self-powered operation. Furthermore, the practical application of the device to detect PD signals with a visual alarm system under UVC release conditions is demonstrated.

Efficient hydrogen production at a rationally designed MoSe2@Co3O4 p-n heterojunction

During the past several years, transition metal compounds have shown high activity in the field of photocatalysis. Therefore, the MoSe₂@Co₃O₄ with excellent photocatalytic properties through simple hydrothermal and physical mixing methods was prepared. This composite material was composed of n-type semiconductor MoSe₂ and p-type semiconductor Co₃O₄. After optimizing the loading of Co₃O₄, the optimal hydrogen production can reached 7029.2 μmol g^-1h^-1, which was 2.34 times that of single MoSe₂. In addition, some characterization methods were used to explore the hydrogen production performance of the composite catalyst under EY sensitized conditions. Among them, the UV-vis diffuse reflectance spectra suggests that MoSe₂@Co₃O₄ exhibits stronger visible light absorption performance than the single material. Fluorescence performance and photoelectrochemical characterization experiments further prove that, the special structure formed by MoSe₂ and Co₃O₄ and the existence of p-n heterojunction effectively accelerate the separation and transfer of carriers meanwhile inhibit the recombination probability of electron-hole pairs. Combined with other characterizations such as XRD, XPS, SEM and BET, the possible hydrogen production mechanism was proposed.

A novel p-n Mn0.2Cd0.8S/NiWO4 heterojunction for highly efficient photocatalytic H2 production

Constructing a p-n heterojunction has been regarded as an effective way to restrain charge recombination and boost photocatalytic H2 production activity. Herein, a novel Mn0.2Cd0.8S/NiWO4 composite was fabricated by a hydrothermal process and which exhibited enhanced H2 production activity and excellent photostability. Particularly, the composite with 30 wt% of NiWO4 achieved the optimal H2 production rate of 17.76 mmol g-1 h-1, which was 2.9 times higher than that of Mn0.2Cd0.8S. The increased H2 production property was mainly due to the p-n heterojunction between Mn0.2Cd0.8S and NiWO4, which provided an efficient path for charge transfer and inhibited the photocorrosion of Mn0.2Cd0.8S. This work can offer technical support for the design and development of p-n heterojunctions that can be applied for photocatalytic H2 production.

Path of electron transfer created in S-doped NH2-UiO-66 bridged ZnIn2S4/MoS2 nanosheet heterostructure for boosting photocatalytic hydrogen evolution

This work introduces the synthesis of ZnIn₂S₄/NH₂-UiO-66/MoS₂ sheet heterostructure photocatalysts and their application to photocatalytic hydrogen evolution.

An amorphous nickel boride-modified ZnxCd1−xS solid solution for enhanced photocatalytic hydrogen evolution

In this work, the rational design of amorphous Ni_xB as a co-catalyst for the modification of Zn_xCd_1−xS was achieved.