Controlled lipid digestion in the development of functional and personalized foods for a tailored delivery of dietary fats

In recent decades, obesity and its associated health issues have risen dramatically. The COVID-19 pandemic has further exacerbated this trend, underscoring the pressing need for new strategies to manage weight. Functional foods designed to modulate lipid digestion and absorption rates and thereby reduce the assimilation of dietary fats have gained increasing attention in food science as a potentially safer alternative to weight-loss medications. This review provides insights into controlled lipid digestion and customized delivery of fats. The first section introduces basic concepts of lipid digestion and absorption in the human gastrointestinal tract. The second section discusses factors regulating lipid digestion and absorption rates, as well as strategies for modulating lipid assimilation from food. The third section focuses on applications of controlled lipid digestion in developing personalized foods designed for specific consumer groups, with particular emphasis on two target populations: overweight individuals and infants.

Physicochemical properties and in vitro digestion behavior of emulsion micro-gels stabilized by κ-carrageenan and whey protein: Effects of sodium alginate addition

Emulsion micro-gels exhibit significant potential as functional ingredients for modifying food texture, replacing saturated fats, or serving as templates for the controlled release of bioactive compounds. Structural design principles are being applied more frequently to develop innovative emulsion micro-gels. In this paper, whey protein concentrate (WPC), κ-carrageenan and sodium alginate (SA) were utilized for preparing emulsion micro-gels. To reveal the regulation mechanism of the structural and physicochemical properties of emulsion micro-gels on lipid digestion, the influence of SA additions on the structural, physicochemical properties and in vitro digestion behavior of κ-carrageenan/WPC-based emulsion micro-gel were explored. The FTIR results suggest that the emulsion micro-gels are formed through non-covalent interactions. With the increase of SA addition (from 0.7 g/100 mL to 1.0 g/100 mL), the decreased mean droplet size, the increased hardness, elasticity indexes, and water holding capacity, the reduced the related peak times all indicated that the emulsion micro-gels exhibit enhanced rheological, stability, and mechanical properties. It can be concluded from the microstructure, particle size distribution of the emulsion micro-gels during simulated digestion and free fatty acid release that both κ-carrageenan/WPC-based emulsion micro-gel and κ-carrageenan/WPC/SA-based emulsion micro-gel can inhibit lipid digestion due to the ability to maintain structural stability and hindering the penetration of bile salts and lipase through the hydrogel networks. And the ability is regulated by the binding properties the gel matrix and oil droplets, which determine the structure and physicochemical properties of emulsion micro-gels. The research suggested that the structure of emulsion micro-gels can be modified to produce various lipid digestion profiles. It may be significant for certain practical application in the design of low-fat food and controlled release of bioactive agents.

Fabricating Pea Protein Micro-Gel-Stabilized Pickering Emulsion as Saturated Fat Replacement in Ice Cream

Unsaturated fat replacement should be used to reduce the use of saturated fat and trans fatty acids in the diet. In this study, pea protein micro-gels (PPMs) with different structures were prepared by microparticulation at pH 4.0-7.0 and named as PPM (pH 4.0), PPM (pH 4.5), PPM (pH 5.0), PPM (pH 5.5), PPM (pH 6.0), PPM (pH 6.5), and PPM (pH 7.0). Pea protein was used as a control to evaluate the structure and interfacial properties of PPMs by particle size distribution, Fourier transform infrared spectroscopy (FTIR), free sulfhydryl group content, and emulsifying property. PPM (pH 7.0) was suitable for application in O/W emulsion stabilization because of its proper particle size, more flexible structure, high emulsifying activity index (EAI) and emulsifying stability index (ESI). The Pickering emulsion stabilized by PPM (pH 7.0) had a uniform oil droplet distribution and similar rheological properties to cream, so it can be used as a saturated fat replacement in the manufacture of ice cream. Saturated fat was partially replaced at different levels of 0%, 20%, 40%, 60%, 80%, and 100%, which were respectively named as PR0, PR20, PR40, PR60, PR80, and PR100. The rheological properties, physicochemical indexes, and sensory properties of low-saturated fat ice cream show that PPM (pH 7.0)-stabilized emulsion can be used to substitute 60% cream to manufacture low-saturated fat ice cream that has high structural stability and similar melting properties, overrun, and sensory properties to PR0. The article shows that it is feasible to prepare low-saturated fat ice cream with PPM (pH 7.0)-stabilized Pickering emulsion, which can not only maintain the fatty acid profile of the corn oil used, but also possess a solid-like structure. Its application is of positive significance for the development of nutritious and healthy foods and the reduction of chronic disease incidence.

Effect of Temperature and Alkali Solution to Activate Diethyl Carbonate for Improving Rheological Properties of Modified Hydroxyethyl Methyl Cellulose

The applications of cellulose ethers in the petroleum industry represent various limitations in maintaining their rheological properties with an increase in both concentration and temperature. This paper proposed a new method to improve the rheological properties of hydroxyethyl methyl cellulose (HEMC) by incorporating diethyl carbonate (DEC) as a transesterification agent and alkali base solutions. Fourier transform infrared (FTIR) analysis confirmed the grafting of both composites onto the HEMC surface. The addition of sodium hydroxide (NaOH) improved the stability of the polymeric solution as observed from ζ-potential measurement. Shear viscosity and frequency sweep experiments were conducted at concentrations of 0.25-1 wt % at ambient and elevated temperatures ranging from 80-110 °C using a rheometer. In the results, the increase in viscosity at specific times and temperatures indicated the activation of DEC through the saponification reactions with alkali solutions. All polymeric solutions exhibited shear-thinning behavior and were fitted well by the Cross model. NaOH-based modified solution exhibited low shear viscosity compared to the DEC-HEMC solution at ambient temperature. However, at 110 °C, its viscosity exceeded that of the DEC-HEMC solution due to the activation of DEC. In frequency sweep analysis, the loss modulus (G″) was greater than the storage modulus (G') at lower frequencies and vice versa at higher frequencies. This signifies the viscoelastic behavior of modified solutions at 0.50 wt % and higher concentrations. The flow point (G' = G″) shifted to a low frequency, indicating the increasing dominance of elastic behavior with the rising temperature. At 110 °C, the NaOH-based modified solution exhibited both viscous and elastic behavior, confirming the solution's thermal stability and flowability. In conclusion, modified HEMC solution was found to be effective in controlling viscosity under ambient conditions, enhancing solubility, and improving thermal stability. This modified composite could play a significant role in optimizing viscoelastic properties and fluid performance under challenging wellbore conditions.

Influence of Whey Protein Micro-Gel Particles and Whey Protein Micro-Gel Particles-Xanthan Gum Complexes on the Stability of O/W Emulsions

Appropriate pretreatment of proteins and addition of xanthan gum (XG) has the potential to improve the stability of oil-in-water (O/W) emulsions. However, the factors that regulate the enhancement and the mechanism are still not clear, which restricts the realization of improving the emulsion stability by directional design of its structure. Therefore, the effects of whey protein micro-gel particles (WPMPs) and WPMPs-XG complexes on the stability of O/W emulsion were investigated in this article to provide theoretical support. WPMPs with different structures were prepared by pretreatment (controlled high-speed shear treatment of heat-set WPC gels) at pH 3.5–8.5. The impact of initial WPC structure and XG addition on Turbiscan Indexes, mean droplet size and the peroxide values of O/W emulsions was investigated. The results indicate that WPMPs and XG can respectively inhibit droplet coalescence and gravitational separation to improve the physical stability of WPC-stabilized O/W emulsions. The pretreatment significantly enhanced the oxidative stability of WPC-stabilized O/W emulsions. The addition of XG did not necessarily enhance the oxidative stability of O/W emulsions. Whether the oxidative stability of the O/W emulsion with XG is increased or decreased depends on the interface structure of the protein-XG complex. This study has significant implications for the development of novel structures containing lipid phases that are susceptible to oxidation.

Synergistic gelation in the hybrid gel of scallop (Patinopecten yessoensis) male gonad hydrolysates and xanthan gum

This study evaluated the gel and microstructure properties of scallop (Patinopecten yessoensis) male gonads hydrolysates (SMGHs) combined with xanthan gum (XG). SMGHs/XG hydrogel matrix properties and structures were elucidated via different analysis tools such as rheometry, LF-NMR, FTIR, AFM, and Cryo-SEM. The addition of XG significantly improved the rheological properties of SMGHs, as indicated by 3.1-fold G' and 1.3-fold melting temperature with increasing the XG dose to 5.6 mg/ml. The corresponding decrease in the T₂₃ relaxation time from 450.3 to 365.6 ms also signified the strong binding between SMGHs and XG. SMGHs/XG also had a higher proton density (T₁ and T₂ weighted images) due to the higher bound and free water content of the hybrid gel systems, respectively. Additionally, the blueshift in the amide I and II bands in SMGHs/XG further indicated stronger electrostatic interactions between SMGHs and XG. Such scenarios resulted in a well-distributed and compact network with a rougher surface of SMGHs/XG in comparison to pure SMGHs and XG, as assessed by AFM and SEM. These results suggest that SMGHs/XG gel could be a potential hybrid gel applied in the food industry. PRACTICAL APPLICATION: Scallop (Patinopecten yessoensis) male gonads are edible, but are usually discarded during processing of scallop adductor. Because of its rich nutrition and gelation properties, scallop male gonads have a potential role in developing marine source-protein as a functional food base. The SMGHs/XG binary gel would be potentially applied in delivery system in food and biological fields. Further study is undergoing to apply SMGHs/XG binary gel to embed bioactive compounds, such as curcumin and β-carotene.

Interaction of exopolysaccharide produced by Lactobacillus plantarum YW11 with whey proteins and functionalities of the polymer complex

Exopolysaccharide (EPS)-producing lactic acid bacteria have been widely used in fermented milk, but interaction between the EPS and milk proteins has not been well studied. In this study, interaction between the EPS from Lactobacillus plantarum YW11 (EPS-YW11) and whey proteins (WP), and functional properties of the EPS-YW11/WP were investigated. The results showed that EPS-YW11 tended to encase WP by ζ-potential analysis with a decrease in the surface charge of the protein fraction (from -26.00 mV to 15.30 mV), and an increase in the melting temperature of the protein fraction (from 76.31 °C to 84.48 °C) as shown by differential scanning calorimetry. Circular dichroism spectrometry showed that the EPS could induce structural change of WP, that is, increment in the content of α-helixes and random coils, There was stronger interaction between EPS-YW11 and WP at higher temperatures (60 °C, 90 °C) due to formation of intermolecular H-bonds and OH stretching vibration as indicated by infrared spectral analysis. A significant improvement in the texture (hardness, springiness, gumminess, resilience, cohesiveness, and chewiness) of the EPS-YW11/WP complex was also observed when compared to that of the EPS or WP alone. This was confirmed by microstructural observation of the EPS-YW11/WP complex that formed branched and porous structures, and it became more complex and stable with increased temperature treatment. Due to the strong interaction the EPS-YW11/WP exhibited improved functionality. This study identifies the potential of the EPS-YW11 to serve as a functional agent in the processing of fermented dairy products with enhanced textural stability and bioactivities such as cholesterol-lowering, antioxidant, and antibiofilm.